Tender For auction sale of depot non ferrous scrap - p. l. no. 98980725 condemned and unserviceable signalling lead acid batteries 200 ah with / without connecting terminal bolts,lugs,wire and nuts, full / broken of sorts and sizes. it is permitted to drain acid / water and to remove vent plugs, if any. average weight- 18.625 kgs. per number approximately. total weight- 20320 kgs. approximately for 1091 nos. as is where is basis. rate per number should be quoted. note: (1) special attention is invited to para 12.0 of instructions to purchasers for participating in e- auction and special terms and conditions of southern railway and general conditions relating to the auction sale of railway materials through e- auction. (2) purchaser should submit valid pcb certificate and pass book at the time of delivery.
Tender For supply of ta sl no 4 1 1 solderless insulated pin type copper lugs as per ta sl nos 4 1 1 1 to 4 1 1 11 , ta sl no 4 1 2 solderless insulated bootlace type copper lugs as per ta sl nos 4 1 2 1 to 4 1 2 7 , ta sl no 4 1 3 solderless insulated end sealing copper lugs as per ta sl nos 4 1 3 1 to 4 1 3 5 , ta sl no 4 1 4 insulated ring type copper lugs as per ta sl nos 4 1 4 1 to 4 1 4 6 , ta sl no 4 1 5 non insulated ring type terminal ends as per ta sl nos 4 1 5 1 to 4 1 5 10 , ta sl no 4 1 6 non insulated tubular terminal end as per ta sl nos 4 1 6 1 to 4 1 6 10 , ta sl no 4 1 7 non insulated palm blanks crimping terminal ends as per ta sl nos 4 1 7 1 , ta sl no 4 1 8 non insulated ring type terminal ends as per ta sl nos 4 1 8 1 to 4 1 8 7 , ta sl no 4 2 halogen free flame retardant self locking printable white cable markers ferrules as per ta sl nos 4 2 1 to 4 2 6 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 0 5 sq mm as per ta sl nos 4 3 1 to 4 3 1 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 0 35 sq mm as per ta sl nos 4 3 2 1 to 4 3 2 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 0 75 sq mm as per ta sl nos 4 3 3 1 to 4 3 3 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 1 5 sq mm as per ta sl nos 4 3 4 1 to 4 3 4 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 2 5 sq mm as per ta sl nos 4 3 5 1 to 4 3 5 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 4 sq mm as per ta sl nos 4 3 6 1 to 4 3 6 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 6 sq mm as per ta sl nos 4 3 7 1 to 4 3 7 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 10 sq mm as per ta sl nos 4 3 8 1 to 4 3 8 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 16 sq mm as per ta sl nos 4 3 9 1 to 4 3 9 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 25 sq mm as per ta sl nos 4 3 10 1 to 4 3 10 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 35 sq mm as per ta sl nos 4 3 11 1 to 4 3 11 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 50 sq mm as per ta sl nos 4 3 12 1 to 4 3 12 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 70 sq mm as per ta sl nos 4 3 13 1 to 4 3 13 3 , ta sl no 4 3 flame retardant non toxic heatshrinkable sleeves 95 sq mm as per ta sl nos 4 3 14 1 to 4 3 14 3 , ta sl no 4 4 non relesable nylon cable ties as per ta sl nos 4 4 1 to 4 4 8
Tender For supply of supply installation testing and commissioning of 1600 kva 11 by 0.433 kv delta star step down as per atc attached , supply installation testing and commissioning of 11 kv 630a rated breaking capacity 21ka for 3sec sf6 insulated rmu as per atc attached , sitc of 2500 amps sandwich type bus trunking as per atc. , supplying and laying of 3 core 150 sqmm xlpe insulated cable on the existing cable tray or rcc or hume or metal pipe or susface as per atc attached , supplying and laying of 3 core 150 sqmm stranded aluminium conductor conductor screen with extruded semi conducting compound xlpe insulated cable in the existing masonary duct as per atc attached , supplying and makingoutdoor cable end termination with heatshrinkablejoint for 3 core 150 sqmm 111 kv grdae as per atc attched. , copper plate earthing complete as per atc attached. , gi plate earthing complete as per atc attached. , providing 50 mm and 5 mm thick copper strip on surface as per atc attached. , providing 25 mm and 5 mm thick copper strip in 40 mm gi pipe as per atc attached. , providing 25 mm and 5 mm thick copper strip on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class on surface as per atc attached. , supplying and laying of 80 mm gi pipe a-class in ground as per atc attached. , supplying and laying 120 mm dia dwc hdpe pipe as per atc attached. , supply and installation of 4.5 kg co2 type fire extinguisher isi marked as per atc attached. , supply and installation of 06 kgs abs powder type fire extinguishers as per atc attached. , supply and installation of 3 mm thick rubber mat suitable for 33 kv as per atc attached. , supply and installation 0f 4 nos 9.5 ltrs capacity gi bucket as per atc attached. , supply and installation of first aid box as per atc attached. , supply and fixing safety instruction chart as per atc attached. , supply and fixing shock treatment chart as per atc attached. , supplying and fixing of 40mm x 40mm x 5mm thick angle iron frame complete as per atc attached. , supplying and fixing of single line diagram and layout diagram complete as per atc attached.
Tender For supply of cover bolts part no 000110a , isolator assly k3 on off part no 050000 , overload assembly breaker 210a 300a , shunt trip assy 11 o3 00 9 mine line part no 110300 , no volt coil assy 110400 part no 110400 , potential transformer part no ds , incoming gland part no g1 , outgoing gland part no g2 , outgoing gland part no g3 , indicating lamp with pcb mounting part no lab9 , sealing box complete part no s1 , circuit breaker for 100a with complete a part no wr1 , earth leakage relay 50 750 ma 750ma with part no elm7la , core balance transformer part no cbt90m , fixed contact assy 05 01 00 mine line part no 50100 , moving contact assembly for isolator part no o50200 , shunt trip coils part no 110301 , no volt coilunder voltage coil part no 110402 , catcher assy 11 05 31 part no 110531 , fixed contact assembly for breaker part no 110600 , arc chutes part no ac1 , ammeter part no am , push button actuator for el test part no boes2 , reset push button contact element part no boes3 , terminal bushing with insulator dmc inco part no t5 , on off isolator 300a part no k4 , circuit breaker for 200a with complete a part no wr2 , complete control wiring including pla r part no wr2a , limit switch no plus nc for breaker part no mcr16d , no volt coil assy under voltage coil as part no 110400a , micro switch part no 50502 , current transformer for ol part no lat3005 , earth leakage relay 50 750ma 2a dual part no elm7dlas , push button with spindle part no pbs , brass terminal with dmc bushing part no t8 , core balance transformer part no cbt150m , busbar part no bbr300 , thermal overload relay part no 120021 , current transformer for ammeter part no 12020055 , potential transformer type d part no ds , overload coil 400a part no 110105 , dashpot cup part no 110106 , flexible copper braids with lugs part no fcs , moving contact assembly for breaker part no 110200 , single phasing preventor with module part no spp5cmsp
Tender For bid to ras supply of led luminaire (recessed luminaire) (v3) conforming to is 10322 (part 5/section 2) (q3) , molded case circuit breakers (mccb) as per is / iec 60947 (q3) , mcb - miniature circuit - breakers for a.c. operation as per is / iec 60898 (part 1) (q2) , miniature circuit breakers distribution boards as per is 13032 (q3) , flat cable, aluminium conductor with pvc insulation and sheathed isi marked to is 694 (q3) , led garden light (v2) (q2) , electrical plugs (v2) isi marked to is 1293 (q2) , elecric bells and accessories as per is 2268 (q3) , non modular piano type domestic electrical switches isi marked to is 3854 (q3) , self ballasted led lamps (led bulb) (v3) conforming to is 16102 (part 2) (under bis scheme - ii) (q2) , terminal ends for aluminium conductors of insulated cables (compression cable lugs) conforming to is 8309 (q3) , plasticized pvc tapes with non- thermosetting adhesive for electrical purpose (v2) isi marked to is 7809 (part 3/ sec1) (q2) , flat cable, copper conductor with pvc insulation and sheathed isi marked to is 694 (q3) , pvc insulated unsheathed cable with flexible conductor isi marked to is 694 (q2) , led luminaire for road and street lights (v2) conforming to is 10322 (part 5 / section 3) (q3) , led luminaire for floodlight (v2) conforming to is 10322 (part 5/section 5) (q3) , led batten (q2)
Tender For providing and fixing cable end termination and straight through joint with heatshrinkablejointing kit in different cable of lighting transformer, starter, unitized transformer in different north-south quarries, charla,y-curve sidings of ilbl ocp.