Latest heat treatment Tenders | Government heat treatment Tenders

Central Government/Public Sector

CTN :40534047

03 Jun, 2025 NA

Palakkad - Kerala

Tender For supply of ss316l rod - items, ss316l rod 20mm dia material-astm a 479 type 316llength-3mtr (single piece) 1. manufacture s test certificates for chemical and mechanical properties should be done in approved lab.2. 100% ultrasonic testing is required for all rods (nominal dia >50mm) and ndt report should be provided along with supply.3. 100% lpi is required for all rods and ndt report should be provided along with supply.4. heat treatment chart should be provide along with supply., ss316l rod 35mm dia material-astm a 479 type 316l length-5mtr (single piece) 1. manufacture s test certificates for chemical and mechanical properties should be done in approved lab.2. 100% ultrasonic testing is required for all rods (nominal dia >50mm) and ndt report should be provided along with supply.3. 100% lpi is required for all rods and ndt report should be provided along with supply. 4. heat treatment chart should be provide along with supply., ss316l rod 50mm dia material-astm a 479 type 316llength-2mtr (single piece) 1. manufacture s test certificates for chemical and mechanical properties should be done in approved lab.2. 100% ultrasonic testing is required for all rods (nominal dia >50mm) and ndt report should be provided along with supply.3. 100% lpi is required for all rods and ndt report should be provided along with supply. 4. heat treatment chart should be provide along with supply., ss316l rod 90mm dia material-astm a 479 type 316llength-2mtr (single piece) 1. manufacture s test certificates for chemical and mechanical properties should be done in approved lab.2. 100% ultrasonic testing is required for all rods (nominal dia >50mm) and ndt report should be provided along with supply.3. 100% lpi is required for all rods and ndt report should be provided along with supply. 4. heat treatment chart should be provide along with supply., .

CTN :40538617

30 Jun, 2025 NA

Bareli - Madhya Pradesh

Tender For supply of roller support as per drawing number t25017 for heat treatment area. material as per acm t letter no-mcf/mtl/tr/m&c/24/963 dt 28.02.2025 [ warranty period: 12 months after the date of delive ry ]

CTN :39809261

31 May, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For corrigendum : labour charges for stress relieving vacuum heat treatment and triple tempering purpose , labour charges for plasma nitriding of tool steel , subzero treatment of tool steel

Corporations And Associations And Others

CTN :40374730

03 Jun, 2025 NA

Jalandhar - Punjab

Tender For corrigendum : supply of machinery spares - supply of machinery spares, c.s. trash plate machined confirming to is-1030 grade 23/45. free from blow holes .as per drg., grooving as per drg.-1020-mh-0402-01-171(rate should be quoted lum sum)( mill no. 1 ), drilling as per drg. ----------do---------(rate should be quoted lum sum)( mill no. 1 ), grooving as per drg. bcsm/mh/113 (mill no. 2 )(rate should be quoted lum sum), drilling as per drg. ----------do--------- (mill no. 2 )(rate should be quoted lum sum), grooving as per drg. bcsm/mh/112 (mill no. 3)(rate should be quoted lum sum), drilling as per drg. ----------do--------- (mill no. 3)(rate should be quoted lum sum), grooving as per drg. bcsm/mh/112(mill no. 4)(rate should be quoted lum sum), drilling as per drg. ----------do---------(mill no. 4)(rate should be quoted lum sum), mill no.1c.s. scraper with machining as per drawing 1020-mh-0402-01-255 & 256, grooving of top scraper as per drg.1020-mh-0402-01-256(rate should be quoted lum sum), grooving of discharge scraper as per drg.1020-mh-0402-01-255(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.2m.s. scraper with machining as per drawingmh-ts-02-r1, grooving of top scraper as per drg. ----------do------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), m.s. scraper with machining as per drawing mh-ds-02-r1, grooving of discharge scraper as per drg. ----------do---------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.3&4m.s. scraper with machining as per drawing mh-ts-03-r1, drilling as per drg.- ------do--------(rate should be quoted lum sum), grooving of top scraper as per drg.- ------do--------(rate should be quoted lum sum), m.s. scraper with machining as per drawing mh-ds-03-r1, grooving of discharge scraper as per drg.- .------do--------(rate should be quoted lum sum), drilling as per drg. ----------do---------(rate should be quoted lum sum), mill no.2,3 , pitch 50mmm.s. scraperwith machining as per drawing(grpf pressure shoot), grooving of top scraper as per drg. bcsm /mh/015 (rate should be quoted lum sum), grooving of bottom scraper as per drg. bcsm /mh/016 (rate should be quoted lum sum), drilling as per drg.(rate should be quoted lum sum), mill no. 4, pitch 40mmm.s. scraperwith machining as per drawing(grpf pressure shoot), grooving of top scraper as per drg. bcsm /mh/017 (rate should be quoted lum sum), grooving of bottom scraper as per drg. bcsm /mh/018 (rate should be quoted lum sum), drilling as per drg. (rate should be quoted lum sum), c.s crown pinion confirming to is-1030 grade 23/45 free from blow holes and proof machine as per drg., mill no.1 as per drg.(rate should be quoted lum sum), mill no.2,3&4 as per drg.(rate should be quoted lum sum), cane cutting knives, cane cutting knives made from shock resistance ms plate 25 mm thick confirming to is-2062. and tested at hardness-500 bhn tensile-65 kg/mmyield strength-50 kgf/mm elongation-20 % minwith proper heat treatment to avoid breaking the knives. as per drawing no. 1020-mh-0303-1700-105with hard facing, cane cutting knives made from shock resistance ms plate 25 mm thick confirming to is-2062. and tested at hardness-500 bhn tensile-65 kg/mmyield strength-50 kgf/mm elongation-20 % minwith proper heat treatment to avoid breaking the knives. as per drawing no. 1020-mh-0303-1-105with hard facing, c.s trash beam, c.s trash beam as per drg.bcsm/mh/0164

Central Government/Public Sector

CTN :40503496

14 Jul, 2025 NA

Kanakapura - Karnataka

Tender For supply of ferritic steel sheet 5x1250 x 3000 mm., as per drawing: rdso spec no.c-k201, gr ade x2crni12 (409m) table 1&2. heat treatment condition 2d as per table-5., packing instruc tion: stainless steel sheets, coils and plates:- (a) stainless steel (austenitic & ferritic st eel) coils. the coil shall be protected in reasonably good condition to withstand nor mal handling hazard during transit with the following provision as the barest minimu m: i) coil should be wrapped with a layer of water proof paper through out whole leng th. ii) coil should be wrapped with a layer of biodegradeable sheet. iii) outer & inner of coil should be wrapped with gi sheet. iv) side of the coil should be covered with card b oard sheet. v) after this whole coil should be wrapped with biodegradeable plastic sh eet of suitable thickness. vi) the inner edge of the coil should be protected by gi ring f ollowed by another iron ring. vii) outer edge of the coil should be wrapped with gi rin g. viii) coil should be securely strapped with minium 5 steel bands through the eyes of the coil and minium 3 steel bands on the circumference of the eye. ix) whole coil shoul d be mounted on wooden blocks for easy lifting/stacking. x) the sheets in coil form fo r thickness 2mm and above shall have: inner dia of coil 450-800mm outer dia of coil 100 0-1300mm weight of coil 2.4 - 10 tonnes xi) the sheets in coil form for thickness below 2 mm shall have: inner dia of coil 450-650mm outer dia of coil 1000-1300mm weight of coil 5.0 - 10 tonnes. (b) stainless steel (austenitic & ferritic steel plates/sheets) i) the sheet s/plates shall be supplied in bundles of optimum weight: 2mt+/-10% & each sheet/plate s hall be seprated with a layer of water proof paper, after this the whole bundle shoul d be wrapped with double layer of water proof paper and a biodegradeable plastic she et of suitable thickness. a metal protection in edges should also be provided. ii) all bu ndles shall have a minimum of 2 hoops upto 1.2 meter in length and one extra hoop for every additional meter. the bundles shall also be provided with skid (wooden packing under neath) to facilitate handling. mechanical damange & corrosion during transit if any shall be at the cost of supplier. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :40068332

03 Jun, 2025 NA

Bangalore - Karnataka

Tender For corrigendum : supply of heat treatment equipment for continuous processing of fibers

Central Government / Public Sector

CTN :40501043

16 Jun, 2025 NA

Guntur - Andhra Pradesh

Tender For light weight spanner for sej bolts as per specification. 1. double ended open with 15 degre e angle. 2. size 46mm & 50mm at either end. 3.length 680mm (min) - 760mm (max). 4. manufactured by f orging process with black phosphate finishing. 5. heat treatment with controlled oil bath process. hardness of final product 380-400 bhn. 6. approx. weight 1300gm plus/minus 5%. 7. capacity to handle 500ns torq ue without breakage. 8. special spanner for sej bolts confirming to jus - 4835 or equivalent. note:- sample to be approved before bulk supply [ warranty period: 12 months after the date of delivery ]

CTN :40287039

16 Jun, 2025 NA

Hyderabad - Telangana

Tender For corrigendum : operation and comprehensive maintenance of heat treatment furnace sthrough goco mode for 01 year

CTN :40451402

25 Jun, 2025 NA

Multi City - Multi State

Tender For mechanical workshop- carrying out zone no. 9 b area mechanical workshop easttraversor & east side shops of east traverser- power maintenance shop, machine shop,heat treatment shop, smithy shop, carriage component shop, millwright shop, meetinghall near millwright shop, gas godown, pump no. 07, central park, wheel shop, welding shop, spring shop, bogie shop, shell shop, incoming shed, wtws section, masonry tank,e.t.p., general toilet no. 06, 07, 08, 09, 10 & wards, service building of store depot,r.p.f. post of store depot etc (expect sheds work) for maintenance of all civil engineering work. for p.e. 30.06.2026

CTN :40384032

07 Jun, 2025 NA

Aurangabad-Mh - Maharashtra

Tender For supply of labour charges for stress relieving vacuum heat treatment and triple tempering of tool steel , labour charges for cryogenic treatment of tool steel

Heat Treatment Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector