Get complete information related to latest Heating Materials Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Heating Materials Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Heating Materials Tenders.
Tender For supply, installation, testing and commissioning of vrv/vrf based heating ventiation and air conditioning system for auditorium at police headquarters, peerbagh, srinagar
Tender For supply of laboratory equipments and standards as per spec. no. hemrl/qard/spec/2025/lab equipments & standards - acid storage cabinet with exhaust system, capacity: 100-120 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , acid storage cabinet with exhaust system, capacity: 220-250 liter, qty: 01 no a. construction of cabinet should be minimum 8mm polypropylene panels, which can give protection against harsh acids, alkali and corrosion. b. there should have adjustable and reversible shelves and can be customized. c. the storage should be divided into two parts to store different acids. d. front door of the cabinet shall be in twin door design having glass panel. e. door hasp should accept padlock to achieve double locks and also have safety lock system. f. there should have circulating fans with air vents. , sample storage cabinet, capacity: 220-250 liter, qty: 02 nos. a. the laboratory sample storage cabinet should be made of pure stainless steel. b. there should have adjustable shelves and can be customized. c. should have double lock system. d. front door of the cabinet shall be in twin door design having glass panel. ?. should be workable within temperature range of 10-50c and humidity of 20-80%. f. door handles shall make of ss 304., glass membrane filtration assembly with three manifold system and vacuum pump & other accessories, qty: 02nos. vacuum filtration assemblies made of borosilicate glass that should be compatible with most organic solvents for solvent filtration purpose. b. funnel, receiver flask & filter support base should be made of borosilicate glass the filter support base design should have an integral vacuum connection located above the filtrate dip such that it can prevent contamination of the vacuum line from droplets. d. it should be three place manifold glass filtration assembly. glass funnel capacity: 300ml f. filter support base with sintered glass filter: 47mm. g glass receiver flask: i) 500ml-01 no, ii) 1000ml-01 no iii) 2000ml-01 no. h. aluminium clamp: 47mm i. effective filtration area: 9.6cm the filtration base should have a silicon stopper. k. all accessories should come with assembly. vacuum pump: , vacuum pumps are to be equipped with vacuum regulator to adjust vacuum. b. vacuum pump should have thermal protection device to shut off the pump automatically when overheated and resume working when temperature cools down. c. max. vacuum (mbar): 100 d. max flow rate (l/min): 17 e. motor rotation (rpm): 1450 , digital rotary shaker, qty: 02 nos. the rotary shakers comprises of shaking platform, speed regulator and timer to adjust duration of orbital motion. b. shaking platform should be made of ss 304 to avoid any kind of rust formation. clamps should be made of either unbreakable plastic or stainless steel d. the housing should be made with thick sheet of mild steel duly powder coated. motion: rotary motion f shaking mechanism: brushless motor used for shaking b digital lcd display with rpm controller provided in the panel. h over temperature alarm. speed (rpm): 20-200 accuracy: 1c k. volume capacity: should be of different sizes like as 16 x 250ml and 16 x 500ml. l platform dimension (inches): 18 x18 m. temperature control: electronic/automatic ceramic hotplate magnetic stirrer, qty: 06 nos. a. digital lcd display with back light. b. big size ceramic hot plate with flame protection and durability. e. heating and stirring can proceed simultaneously. d. temperature & stirring speed is stepless adjusted.
Tender For providing of operation and maintenance of hvac system (heating, ventilation and air conditioning system) - operation of hvac (heating ventilation and air conditioning) at bihar state office indian oil bhavan,patliputra industrial area ,patna for a period of 2 yea..
Tender For supply of construction material for bty comd post 8.06m x 6.02m x 3.40m as per technical specification and drawings attached , cement opc 43 grade packed in hdpe bag each 50 kg wt conforming to is 8112 - 1989 make birla gold or ambuja or ultratech or acc or jk or dalmiya , coarse sand free from vegetation , coarse aggregate 20mm graded , coarse aggregate 40 mm graded , coarse aggregate 40-63 mm graded , stone boulder 9 inch to 12 inch , water proofing compoundconfirming to is 2645-2003 make pidilite or dr.fixit or fevicol , hdpe sand bag og colour of size 15 inch x 30 inch , painting brush 4 inch isi marked , anti corrosive red oxide zinc chromate primer confirming to is 5-2004 make berger or asian or nerolac , synthetic paint enamelled og confirming to is 5-2004 make berger or asian or nerolac , thinner make nerolac or berger or asian , srt 2440 x 613 x 180 2 mm thick ms sheet hot rolled steel with nuts and bolts incl one coat of red oxide make tata or sail or jsw camouflage pattern , ismb hot rolled ms 200 x 100 3m maketata or sail or jsw , ismb hot rolled ms 200 x 100 4m make tata or sail or jsw , polythene sheet colour less and weight of sheet shall be not less than 70gm per sqm , pbs roll 20m long width of 0.9mtr isi marked with min weight of 34 kgs per roll , prefeb mild steel door of size 900x 1700mm outer frame made out of isa 40x 40x6mm , shuttering and nails wooden planks for shuttering iind class wood of size 3.0 x 0.30 x 0.026m , wooden scantling various size , nails various size , lightning conductor air terminal single pointed aluminium rod 12mm dia and 300mm long. , testing point terminal block make of gun metal and phosphorus bronze size 75x75x25mm drilled and screwed including 3 nos 8mm dia 25mm long hexagonal head screw. , aluminium strips 25x3mm. , galvanised iron strip 32x6mm. , funnel fitted with 20mm dia gi pipe 1.5m long make jindal or tata or kalinga , earthing plate 600x600x6mm gi steel suitable for gi strip fittings drilled with two nos holes for 6 mm dia near one side. , ci earth pit cover of size 300x300x6mm with angle iron of size 20x20x3mm thick with ms frame. , insulating pvc block 75x75x30mm with insulating clamp nut and bolt make - presto or polycab or finolex , charcoal , slt , double sleeping bunk complete with plywood matress and all connected accessories all as per technical specification. , study chair of size length 56cm height 82 cm width 56 cm lacqured finish with arm seat and back cushion velvet holestry make supreme or equivalent , study table of size 4x2 wooden top on round tube structture with three drawers unit , steel bed side locker of size 1000mm x 1520mm x 450 mmcomplete with all accessories as per tech spec. , water dispenser of 230 v 500 watts without refrigerator with normal cold and heating capacity of 5 lts per hour , plastic dustbin of capacity 40 ltrs make neelkamal or cello or supreme. , solar system comprising of 1 x 500 watt monocrystaline pv panel 100ah solar bty min 550va ac or dc inverter with inbuilt mppt and charge controller equivalent , portable indoor type high quality kero heater metal body ignites type of continues heating duration min 8 hrs
Tender For supply of compressed air petrol pre-heating system with complete equipment, suitable for w elding of rail joints by at welding process as per specification no: spec/tpp-cap-2022 and pre heating syst em deployed shall have facility to record and save the pre heating parameters viz. pressure and time, firm details, welder details and weld location details for a particular weld along with facility to send these prehe ating parameters and related details automatically as sms to concerned railway officials immediately after finishing of preheating. it shall be possible to send this sms simultaneously up to 10 mobile numbers as pe r irst-19-2021, date: 01.02.2022, point no. 10.1 (iv). make: ss eng or equivalent. [ warranty period: 30 months after the date of delivery ]
Tender For corrigendum : supply of aiir condiitiioniing system - supply charges for mr item no 1.001 , supplycharges for mr item no 1.002 , supply charges formr item no 1.004 , supply charges for mr item no1.005 , site work charges as per mr sl no 02.001 foritem no 1.001 , site work charges as per mr sl no02.002 for item no 1.002 , site work charges as permr sl no 02.004 for item no 1.004 , site workcharges as per mr sl no 02.005 for item no 1.005 , freight charges as per mr sl no 03 , total lumpsumpwcamc charges for 5 years as per mr sl no 12.001for item no 01.001 , total lumpsum pwcamc chargesfor 5 years as per mr sl no 12.002 for item no 01.002, total lumpsum pwcamc charges for 5 years as permr sl no 12.004 for item no 01.004 , total lumpsumpwcamc charges for 5 years as per mr sl no 12.005for item no 01.005 air conditioning system, vrf system, hvac, heatingventilation air conditioning, heating ventilationand air conditioning system, vrf unit, vrf system
Tender For supply of lab equipment - lab equipment, microscope with camera : should have observation method including brightfield and darkfield, should be illuminated with transmitted illuminator and led lamp, should have stage focusing mechanism with coarse handle stroke of 15 mm, should have features for coarse adjustment limit stopper and torque adjustment for coarse adjustment knob, should have field trinocular diaphragm, should have revolving nosepiece with manual with 4 standard positions , should have manual stages with right-hand control having built-in x: 76 mm, y: 30 mm, should have built in manual abbe condenser na 1.25/ w.d. - (4x 100x), standard (fn20) observation tubes-trinocular should be included, should have 30 tube inclination angle or equivalent, trinocular tube light path selection (camera: observation) :0%:100%, 100%:0%, should have interpupillary distance adjustment: 48 75 mm, dimensions (w d h): trinocular: 198 (w) x 398 (d) x 430 (h) mm, weight should be not more than weight: approx. 6.5 kg, compact design, should be supplied with 15 mega pixel or more camera attachment and computer to visualize sample, should be supplied with dust cover complete set. with c-mount stand, camera, computer, should have microscope camera software and image processing system, computer system should contain desktop (minimum 12th gen intel core i3, ram minimum 8gb, windows 11, ms office 2021, wi fi 6, bluetooth 5.2 monitor minimum 18 inch and above, fhd, ips display, eye comfort), keyboard and mouse for operating microscope, service and operation manuals to be provided; warranted for 1 years or more after satisfactory installation., magnification lens with light: magnifier is made of high quality glass. white energy-efficient led bulbs. the glass lens magnification 3x to 45x magnification. the large lens diameter 87 mm handle length 4.1 inch, digital weighing scale: electronic balance should have the following functionality, upto 220 g capacity; 0.001 g readability; brilliant display; internal calibration; robust construction; easy levelling; maximum capacity: 220 g, minimum load: 10mg, readability: 0.1 mg or better, settling time: 6 s or better, adjustment: internal, display: backlit lcd, weighing pan size: upto 90 mm , micro processed based digital display with on/off mode, build with die-cast aluminium material, should have adjustable feet for uniform levelling. should be iso, ce certifiedshould provide user, technical manuals to be supplied in english language, it should have interface rs232, service and operation manuals to be provided; power supply: ac 230v/115v,50/60hz, warranty -1year or more, authorization letter, hot air oven : double walled unit with inner chamber of stainless steel, outer chamber of mild steel duly powder coated. temperature thermostatically controlled range: 50 c to 200 c 1 c. beaded heating elements are placed in the ribs at the bottom and sides mineral /glasswool insulation, capacity: 200ltr or more, corrosion resistant body for longer life, air circulation fan for better heat circulation and dry of sample, complete with l shape thermometer, two indicators, thermostat and on / off switch, microprocessor based pid temp. controller cum indicator, adjustable selves: 2 or more, inner dimensions: 600 x 600 x 600mm or more, it should have concealed ss handle and positive latch system. controller should be equipped with timer, auto tuning and alarms. supply voltage: 230 v ac, 50 hz, single phase. should have local service setup for prompt and efficient post-sales support. warranty 1 year or more, muffle furnace: unit should be suitable for laboratory, it should be fitted with good quality tiles set, with ceramic fibred insulation. unit capacity: 4 litre or more, outer casing of thick mild steel duly painted / powder coated. working temperature ranges from 50 c - 1150 c is controlled by digital temperature cum indicator with e. r. control device for fine control. dimension should be compact: 125 x 125 x 250 mm, u