Latest heavy equipment repair Tenders | Government heavy equipment repair Tenders

Central Government/Public Sector

CTN :40754113

28 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For custom bid for services - non-core maintenance activities in m&s-1. the scope of work includes carrying out the following non-core activities of maintenance and services department at bhelpppu, thirumayam as per instructions of maintenance in-charge. as per bhel estimate, it requires indicative 2 no. of unskilled labours daily to complete all the below activities. 1. cleaning of machines, components, oil spilled area during and after maintenance. 2. movement of spares, components and consumables for maintenance. 3. maintenance assistance for heavy works. 4. handling of lubricants, hydraulic oil, gas cylinders and diesel. contractor's scope: aa) cleaning of machines, components and oil spilled areas during and after maintenance: 1. cleaning of sub-assemblies and dismantled components while attending the break-down of machines. 2. cleaning of machine bottom floor, facility bottom floor and hydraulic power pack surrounding area as and when required. 3. cleaning of the machine surface and other accessories & fixtures of the machines for trouble shooting and to access the machine components during maintenance. 4. cleaning of the machine, floor area after attending the breakdown. all the spillage oil, oil soaked cotton waste, refractory wastes and other scrap wastes generated during maintenance to be removed from the surroundings of the machine and moved to the waste bins. 5. cleaning of oil, chips and dust inside and outside machine pit and intricate areas of machines while attending maintenance. 6. cleaning of machine components, filters and stand-by sub-assemblies with suitable cleaning agents. 7. cleaning of machines under shifting and assisting the fitters & electricians for dismantling, shifting and re-erection activities. 8. cleaning of crane parts at the top of the cranes and at the floor level are to be done as per instruction of maintenance in-charge. bb) movement of spares, components and consumables for maintenance: 1. movement of machine components from machine area to work bench and vice versa. 2. movement of raw materials for spares manufacturing to the respective machine shop. 3. movement of spares, consumables, raw materials, gas cylinders, etc., from stores to respective maintenance sections/areas and vice versa. 4. movement of heavy duty cables and cable drums from storage area to work place and vice versa. 5. movement of waste / scrap material to the respective disposal area. 6. movement of crane parts and lifting tackles during maintenance and for testing. 7. movement of furnace castings, refractory bricks, castables, refractory cement, ceramic wool, etc. for furnace maintenance. cc) maintenance assistance for heavy works: 1. assistance in activities like cable laying, dragging, winding, etc. 2. loading & unloading of lpg cylinders, refractory materials, machine parts, etc. from transport vehicles. 3. assisting in loading & unloading of machines / machine parts during erection and shifting of machines as and when required. 4. assistance in various maintenance activities involving heavy works like tightening / loosening of heavy duty fasteners, removal & assembly of heavy bearings, etc. 5. handling of heavy parts of the machine during maintenance. dd) handling of lubricants, hydraulic oil, gas cylinders and diesel: 1. cleaning of lubrication and hydraulic system of machines fairly without any oil traces. 2. assisting fitters for changing the worn out/damaged parts such as hoses, valves, high pressure pipe fittings, filters, etc., while doing maintenance of the systems. 3. assisting in oil top up/replacement with proper grade of oil in the respective hydraulic / lube oil tanks and gear boxes in the machines / equipments. 4. assisting in greasing of machines, cranes and facility items at pppu. all greasing points in the plummer blocks, pillow blocks, guide ways, machines greasing points are to be filled with necessary grade of grease manually or using grease gun wherever possible. 5. collect

Central Government And Public Sector

CTN :40388004

26 Jun, 2025 NA

Chandigarh - Chandigarh

Tender For corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; 10000 ltr overhead water tank isi marked heavy duty; service provider

Central Government/Public Sector

CTN :40753627

21 Jun, 2025 1

Port Blair - Andaman And Nicobar Islands

Tender For repair, maintenance, and installation of plant/ systems/equipments (version 2) - office space; repair/ renewal service of various office assets; service provider-the ro purifier/ plant in rest room not absorbing water view suspected r0 01 job membrane worn out/ defective. same is to be replaced/ renewed including qty the ro-cum-water purifier in dsc block damaged and motor with coil burned 01 job out due to power fluctuation including adapter damage with suction pipe. the ro cum purifier to be repaired with replacement of burned motor and adapter including complete servicing and proving. (e)exhaust fan motor of pantry worn out due to ageing and not working. same to 01 job be replaced/ renewed and refitted for satisfactory working including set up and renewal of various electrical fittings. heavy noise observed in 1.5 ton split ac of ops room with continuous seepage 01 job of water. the outdoor unit of the ac malfunctioning due to outdoor pcb unit damage view short circuit. the pcb to be replaced and cooling unit (internal unit) to be cleaned/ serviced for satisfactory working with proving including internal wiring job and refilling of gas (r 410). cooling unit of the split ac at mt section not working due to gas exhaustion. 01 job gas to be refilled with servicing of the unit. the doutble door refrigerator of pantry not working due to defect and damage 01 job in pcb and compressor found malfunctioning. the colling effect not satisfactory. the pcb and compressor to be rectified and replaced with filling of r 134 gas. same to be proved for satisfactory working. additional terms and conditions officer's washroom various fitments viz. showers, mirrors, wash basin, soap 01 job stand, curtain rod and 03 in no. conmmodes deteriorated. to be renewed as per sample. in addition the 02 ceiling light broken and uprooted from base of ceiling. to be renewed and replaced with wiring from sockets..

Central Government / Public Sector

CTN :40729881

30 Jun, 2025 NA

Kamrup - Assam

Tender For repair, maintenance & operationof heavy equipments (of garage section) at guwahatirefinery tender no 9010c25b18 grinding machine, machine tools and cutting tools, hand drilling machine, reciprocating saw for polymer cutting and other hand held machine tools, plasma cutting machine gas cutting machine, oxy acetylene gas cutting set comprising regulator, blow pipe, flash back arrestor, cutting machine, nozzles, hose, and connectors, hydro blasting machine, chain pulley block, hand tools and non sparking tools, sling and d shackle, torque tool and bolt tensioner, flange spreader, nut splitter, hydraulic jacks.

State Government

CTN :40730304

27 Jun, 2025 4.81 Lacs

Margao - Goa

Tender For providing of gym equipments for cortalim villagers social welfare sports club at manxer cortalim in v.p. cortalim of cortalim constituency (xvth fin. com.) - heavy commercial treadmill specification: - motor 8 hp ac motor energy efficiency rated - speed - 22 km/h - features: 10 yrs motor warranty, commercial elliptical trainer specification: - max user weight 180 kg features: 1. resistance level : 24 2. rear drive and handle arms enable sustain, smooth and engaging exercise., transformer bike transformer bike specification: size 1245*635*1180mm nw/gw 66.5kg/68.5kgmax user weight 180kgfeatures: 1. heavy duty metal tubes with scratch- resistant coating., 2 tiers dumbbell rack specification: size - (l) 720 (w) 2480 (h) 810 weight -71kg 12 pair dumbbell rack features: 1. frame color: grey 2.quad pipe with electrostatic powder coating, hexa dumbell hexa dumbelltear-proof, soundless and bouncy effect(2.5,5,10,12.5,15,20,25 ) 1 pair each, 7ft s-rod straight rod, 3ft s-rod straight rod, ezr 4ft e z rod, olympic plates steel colar tear-proof, soundless and bouncy effect 2.5 kgs-2 pairs,5 kgs 5 pairs,10kg-5 pairs,20 kgs 4 pairs, ebarbell rack

corporations/Associations/Others

CTN :40676092

30 Jun, 2025 NA

Ranga Reddy-T - Telangana

Tender For corrigendum : hiring, leasing of heavy earth moving equipments for drilling, excavation, with loading and transportation of limestone and shale..

CTN :40734022

04 Jul, 2025 NA

Tuticorin - Tamil Nadu

Tender For purchase lab equipments for mechanical dept - heat power engineering lab thinks, cleveland open cup apparatus to find flash point and fire point, pensky martin closed cup apparatus to find flash point and fire point, heavy duty battery (for genearator use) 12v 100ah

CTN :40703787

04 Jul, 2025 NA

Tiruvallur - Tamil Nadu

Tender For supply of die grinder pneumatic co model co 3050n 12000 or equivalent with wheel guard and std equipments , pneumatic grinder heavy duty with wheel guard to cp model cp 3140 b 6000 or equivalent

Private Sector

CTN :40099197

24 Jun, 2025 NA

Guhagar - Maharashtra

Tender For corrigendum : providing of custom bid for services - biennial contract for maintenance of rgppl owned vehicles equipments and deployment of operators for heavy equipments at rgppl site

Corporations And Associations And Others

CTN :40676391

24 Jun, 2025 NA

Panaji - Goa

Tender For limited tender for supply, installation and commissioning of ict equipments - mid range pc intel core i3, mid range pc intel core i5, mid range pc intel celeron, multifunction laser legal printer, multifunction laser printer - type 2, heavy duty photocopier machine (laser) - type 6, mid range laser photocopier machine, software for hand held radio set (monthly subscription)

Heavy Equipment Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors