Latest hex nipple Tenders | Government hex nipple Tenders

State Government

CTN :45374084

11 Jun, 2026 7.00 Lacs

Bikaner - Rajasthan

Tender For supply of various cid joints for pvc pipe under divisional store under distt. dn. ii, bikaner

Central Government/Public Sector

CTN :45366634

19 Jun, 2026 25.00 Lacs

Ferozepur - Punjab

Tender For repair to sunken flooring, plumbing with connected items to otm accn in aor of age b/r-ii of ge (east) ferozepur cantt - demolition of un-reinforced cement concrete in any position, complete all as specified and directed., m&l for cement concrete (1:5:10) type e-2 using 40 mm graded stone aggregate as in filling in sunkan slab or as in sub base, mass concrete, complete all as specified and directed., m&l for 15 mm thick rendering over concrete surface of sunken floor in cm 1:3 on wall as well as sunken floor finished even and smooth without using extra cement using wpc complete all as specified and directed.(wpc measured and paid separetely), m&l for water proofing treatment to rcc sunken floor including wall comprising with the following course of treatment/ specifications form bottom to top:-(a) applying evenly a tack coat of industrial bitumen 85/25 @ 1.6 kg per sqm over a coat of bitumen primer @ 0.40 ltr per sqm including preparation of roof surfaces complete all as specified and as directed.(b) app based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified.note: (i) laying of app based membranes shall be done by torch on method or as per manufacturers instructions.(ii) a minimum overlap shall be not to be less than 150mm of polymeric membranes and sealed all overlaps and joints as manufacturers instructions.(iii) all ci/pvc traps in sunken slabs to be enclosed with pcc 1:1.5:3(min 15 cm) all round., supply only integral water proofing compound, complete all as specified and directed., taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed, m&l for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including wpc,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (wpc measured and paid separately), m&l for preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed., m&l for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed., m&l for preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed., m&l for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings, complete all as specified and directed., m&l for preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing), complete all as specified and directed., resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 sqm but n.exc. 2 sqm each complete all as specified & directed., taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 square metre each including cutting holes in

CTN :45137490

03 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of gi cu mlc fittings - copper pipe 12mm , appliance valve half inch , isolation valve half inch , rubber hose eight mm png , gi elbow half inch , adapter three fourth in f to half in npt m brass , brass union connector three fourthinch to 12 mm f , brass adapter half inch x 12 mm , copper socket 12mm , hex nipple gi size half in x 2 in long , hex nipple gi half inch x 3 inch , nipple gi half in x 4 in len , gi male female elbow half inch , gi plug half inch , gi coupling or socket half inch , half inch gi tee , gi union half inch , tape teflon , clamp hose half inch , u clamp gi half in , u clamp gi three fourth inch , mlc pipe od 16mm , female union brass 16mm x three fourth inch , male union brass 16 mm x half inch , mlc fitting composite pvc clamps , elbow 90 deg brass 16 mm x 16 mm

CTN :44971431

01 Jun, 2026 5.10 Lacs

Bangalore - Karnataka

Tender For bid to ras supply of plumbig items c c - 20mm cpvc coupler , 25mm cpvc coupler , 40mm cpvc coupler , 50 mm cpvc coupler , 50mm to 40mm cpvc reducer coupler , 20mm cpvc elbow 90 degree , 25mm cpvc elbow 90 degree , 40 mm cpvc elbow , 50mm cpvc elbow , 20mm cpvc tee , 25mm cpvc tee , 40 mm cpvc tee , 50mm cpvc tee , 50mm to 25mm cpvc reducing tee , 20mm cpvc end cap , 25mm cpvc end cap , 40mm cpvc end cap , 63mm cpvc end cap , 20mm cpvc ball cock float valve with ball , 20mm cpvc female adapter plastic threaded , 20mm cpvc male adapter plastic threaded , 25mm cpvc female adapter plastic threaded , 25mm cpvc male adapter plastic threaded , 40mm cpvc male adapter plastic threaded , 40mm cpvc female adapter plastic threaded , 50mm cpvc male adapter plastic threaded , 50mm cpvc female adapter plastic threaded , 40 mm cpvc union , 50mm cpvc union , 20mm cpvc tank nipple , 25mm cpvc tank nipple , 63mm pvc pipe , 90mm pvc pipe , 110 mm 6 meter pipe , 25mm pvc coupler , 40 mm pvc coupler , 63mm pvc coupler , 50mm to 40mm pvc reducer coupler , 63 mm to 50mm pvc reducer coupler , 110mm to 63mm pvc reducer coupler , 63mm pvc elbow , 110 mm pvc elbow , 20mm pvc tee 90 degree , 40 mm pvc tee 90 degree , 40mm to 20 mm pvc reducing tee 90 degree , 63mm pvc tee 90 degree , 90mm pvc tee 90 degree , 32mm pvc gate valve , 40 mm pvc ball valve , 63mm pvc union ball valve , 63mm pvc ball valve , 20 mm inch brass mini valve , half inch pvc gate valve , 25mm hack saw blade , 25mm gi hose nipple , 25mm pvc male adapter plastic threaded , 25mm pvc female adapter plastic threaded , 40 mm pvc male adapter plastic threaded , 40 mm pvc female adapter plastic threaded , 40mm pvc end cap , 40mm pvc elbow , 20mm pvc female adapter plastic threaded , 50mm g i elbow , 50mm hex nipple gi , 50mm gi tee , 50mm gi collar , 50mm nrv , 63mm pvc male adapter plastic threaded , 63mm pvc female adapter plastic threaded , 90mm pvc male adapter plastic threaded , 90mm pvc female adapter plastic threaded , 90mm gi tee , 90mm pvc end cap , 90mm to 63mm gi reducer , 3 by 4 inch gi hose nipple , pvc gum 250 ml , adjustable tubular hacksaw frame wooden handle , metal paste white , 180mm mild steel casing pipe , 184mm mild steel casing pipe coupler //bid details 2 / 65

State Government

CTN :45076510

05 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For corrigendum : supply of c.p. hot water connection 18x24 , c.p. towel rail , g.i. socket 1 inch , g.i. hexa nipple 20mm , g.i. hexa nipple 15mm , g.i. union 15mm , g.i. reducer socket 15mm x 20mm , g.i. nipple 15mm x 25mm , g.i. nipple 15mm x 6 inch , g.i. nipple 15mm x 4 inch , g.i. nipple 15mm x 2 inch , aluminium hinges 3 inch , aluminium hinges 4 inch , curtain rod, 20mm heavy , curtain rod clamp, 20mm wall , curtain rod bracket, 20mm l-shape clamp , pipe wrench 12 inch , pipe wrench 18 inch , die set , plier 10 inch , door closer , floor tile ivory colour 1 feet x 1 feet , m-seal 100 gm , roding set

Central Government/Public Sector

CTN :45347674

17 Jun, 2026 24.29 Lacs

Delhi - Delhi

Tender For supply of al. tower bolt 4 inch , al. tower bolt 6 inch , al. tower bolt 8 inch , al. sliding bolt 8 inch , al. handle 3 inch , al. handle 4 inch , al. handle 5 inch , al. handle 6 inch , anti termite oil , glass shelf , brass phase 3 no , brass phase 4 no , brass phase 5 no , brass phase 6 no , brass phase half trun , brass phase marc , brass phase jaquar , pvc ball cock , cp pillar cock , cp connection pipe , cp shower with arm , cp wash basin mixer , cp sink mixer , cp wall mixer , cp bib cock 15mm l.b. , cp bib cock 15mm s.b. , chinaware wash basin , cp angle valve 15mm , 19mm comm. board , cp pillar cock 15mm , cp bottle trap , cp extension nipple , cp jali for sink , door closer , drawer channel 18inch , drawer channel 20inch , drawer handle 4inch , flush door 34 x 82inch , flush door 39 x 82inch , flush door 36 x 82inch , flush door 26 x 82inch , flush door 28 x 82inch , flush door 30 x 82inch , flush door 42 x 82inch , heatex , gi nipple 15mm , gi nipple 20mm , gi elbow 15mm , gi elbow 20mm , gi socket 15mm , gi union 15mm , gi union 20mm , gi tee 15mm , gi tee 20mm , gi pipe 15mm , gi pipe 20mm , gi pipe 25mm , gi pipe 40mm , gi pipe 50mm , gi plug 15mm , gi plug 40mm , gate valve 15mm , gate valve 20mm , gate valve 25mm , gate valve 32mm , gate valve 40mm , glass putty , godown lock , glass corner , ms hinges 50mm , ms hinges 75mm , ms hinges 100mm , ss hinges 75mm , hex nipple 15mm , health faucet 15mm , looking mirror , ms. sliding bolt , ms. handle 75mm , ms. handle 100mm , ms. angle , marandi wood batten , night latch , nails all size , pvc connection , pvc bib cock 15mm , pvc waste pipe , pvc long bend , pvc pipe 2inch , pvc pipe 3inch , pvc pipe 4inch , laminate sheet , tarpin oil , welding rod , wall putty , auto cut hinges ) /bid number : gem/2026/b/7584263 * /dated: 27-05-2026 & & / bid document 1 / 57