Latest hexagon nut Tenders | Government hexagon nut Tenders

Central Government/Public Sector

CTN :44958177

29 Apr, 2026 NA

Rajkot - Gujarat

Tender For supply of modified m.s. black hexagon head bolt with thread m 16,nominal length 50 mm with hole of 3 mm at 5 mm distance from threaded end and property class 4.8, conforming to is 1363(part 1):2023/iso 4016:2022 with hexagon nut with thread m16 and property class 5, conforming to is 1363 (part 3):2018/iso 4034:2012. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44958894

06 May, 2026 NA

Rajkot - Gujarat

Tender For supply of set of fasteners for wheel set earthing housing modification as per drg. no. sked- 945, consisting of 03 items 1) stainless steel stud m8x55mm (mat. aisi 304) with both end threaded length 25mm & 20mm, qty=02nos. 2) stainless steel stud m8x50mm (mat. aisi 304) with both end threaded length 25mm & 15mm, qty=01nos. 3) stainless steel lock nut, m8 (mat. aisi 304), qty=03nos [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44952928

28 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond & u/s melting scrap including ferrous cbc, yoke, knuckle, centre pivot top and bottom, springs, hand brake wheel, bolster, brake beam, draft gear, toggle, rivets, bolt, nut and other c&w melting materials (scrap of sort and sizes in full/broken) in as it is where is condition. custodian:sse/c&w/tnpm. location: (1)near to new sickline shed tnpm(area clearance lot) (2)opposite to dpl shed, sickline tnpm. ds8:023280-25-21784 dt 01/04/2026. pl:98050126. remarks: (1)location 1 is area clearance lot and should be cleared first. (2)crane/jcb/forklift loading may be permitted. (3)springs to be defaced before delivery.

Central Government/Public Sector

CTN :44855792

23 Apr, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : tender for supply of turbine fasteners and small machined components - screw soc head cone point pm10x45 (hw-123.108) -- fully m/cd item as per std. st01019 rev.03 (size no. 108) with matl. hw10683 rev.03 , cap nut m36 (hw-374.47/hw-399.256) -- fully m/cd item as per drg. 31132256017 rev.00 with matl. hw10683 rev.03 , hexagon nut (hw-374.49) -- fully m/cd item as per drg. 41120256034 rev.00 with matl. hw10683 rev.03 , screw hex pm6x16 (hw-123.084) -- fully m/cd item as per std. st01019 (size no. 084) with matl. hw10683 rev.03 , nut collared hex (hw-399.128) -as per drg. no. 41172356082 and matl. hw10673 , bush spare reqd (hw-399.79) -as per drg. no. 31120230016 , var 01 and matl. hw10683 , bush spare reqd (hw-399.80) -as per drg. no. 31120230017 , var 01 and matl. hw10683 , cover (hw-399.113) -as per drg. no. 41120230018 and matl. hw10683 , bush (hw-399.81) -as per drg. no. 31120230021 and matl. hw10683 , nut (hw-399.126) -as per drg. no. 31120230026 and matl. hw10683 , washer (hw-399.242) -as per drg. no. 41120230027 and matl. hw10683 , hexagon head screw (hw-374.42) -as per drg. no. 41120256041 and matl. hw10673 , nut (hw-399.127) -as per drg. no. 31122330018 and matl. hw10683 , washer (hw-399.243) -as per drg. no. 41132256022 and matl. hw10683 , hexagon head screw (hw-391.73) -as per drg. no. 41122356023 and matl. hw10673 , hexagon nut (hw-399.120) -as per drg. no. 41120256039 and matl. hw10683 , seal ring (hw-397.28) -as per drg. no. 41122330009 and matl. hw10683 , bush (hw-399.84) -as per drg. no. 31122330012 and matl. hw10683 , cover (hw-399.109) -as per drg. no. 31122330014 and matl. hw10683 , bush (hw-397.29) -as per drg. no. 41122330015 and matl. hw10683 , bush (spare reqd) (hw-399.90) -as per drg. no. 31132056007 and matl. hw10683 , cover (hw-399.114) -as per drg. no. 41132056013 and matl. hw10683 , nut (hw-374.29) -as per drg. no. 31122356018 and matl. hw10683 , hexagon nut m16 (hw-374.48) -as per drg. no. 41132256009 and matl. hw10683 , nut (hw-391.75) -as per drg. no. 31132256021 and matl. hw10683 , seal ring (hw-399.144) -as per drg. no. 31132256026 and matl. hw10683 , bush(spare reqd) (hw-399.96) -as per drg. no. 31132256013 and matl. hw10683 , cover (hw-399.111) -as per drg. no. 31132256015 and matl. hw10683 , parallel pin (hw-388.58) -as per drg. no. 41132256034 and matl. hw10683

corporations/Associations/Others

CTN :44959362

12 May, 2026 NA

Cuddalore - Tamil Nadu

Tender For supply of sc500280031 rope complete t-13 plm , sc500280053 bottom pin for part-324 of chack brand ratchet lever hoist. , sc500280081 grooved shear pin g07- 6x8 for pulling and lifting machine. , sc500280082 hexagonal nut m8 for pulling and lifting machine , sc500280096 side case rh for chack brand pulling lifting machine. , sc500280097 side case lh for chack brand pulling lifting machine. , sc500280100 pin for release handle for chack brand pulling lifting machine. , sc500280116 hexagonal bolt m8x16long for pulling and lifting machine.

CTN :44959282

01 May, 2026 NA

Pune - Maharashtra

Tender For supply of case assy transfer , dual brake valve , master cyl power unit , slave cyl clutch , air dryer assy , regulator assy lh , rear view mirror , handle door , u clamp small , center bolt kit frt rear spring , rubber hose air intake , door lock assy rh , door lock assy lh , element oil filter , air filter safety , air filter primary , oil seal , front hub oil inner seal , stopper bearing , cable assy control , release bearing butee dm 86p , horn front wheel , brake shoe , pump assy water , cable assy clutch , mounting engine rear , bearing , head lamp low beam lh with leveller , bush king pin , bush , locking plate nut and bolt , assy pipe , cover gear

CTN :44948885

01 May, 2026 NA

Pathankot - Punjab

Tender For supply of clutch booster assy , electric motor , door mechanism , four way valve , fuel flexible pipe , fuel pump motor , carburator assy , bearing 30212 , bearing 32014x , oil seal 60x90x13 , oil seal 48x65x12 , oil seal 50x65x12 , o ring , stud bolt , wheel bolt with nut , circuit breaker battery cut off switch , shim big

CTN :44959359

01 May, 2026 NA

Sonitpur - Assam

Tender For supply of oblique 76 , pvc flexible conduit pipe 15 mm dia , pvc round or square block , fire extinguisher of 1 kg capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled , aluminium strips 25 x 3 point 0 mm , galvanised iron strip 32 x 6 mm , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma overall height 1 point 755m , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms plateform and size of wheel 127 mm , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :44926927

24 Apr, 2026 NA

Delhi - Delhi

Tender For supply and delivery of school requisites 2026 - angle grinder-grinding wheel, diameter 110 mm , power range, 750w to 2000w, 240v + key (eu), band saw-table size 400 x 548, mm, 900 w or 340 x 335 mm, 350, w 240 v + blade and sense (eu), bench drilling machine-13mm, chuck, 240v, minimum table size, 260 x 180 mm + chuck key (eu), bench grinder-minimum 250 w,, 240v, circular saw-minimum 1.5kw,, 240 v + fence and cross-cut guide, (eu) (table mounted), compressor -output 50l/min, 6, bar, 340 w + supply hose and clips, (eu), spraygun-0.7 mm nozzle, diameter, 800 cl capacity (approx), (0.7 mm - 1.4 mm), drilling machine (portable)-, chuck diameter 3 - 16mm, 240 v +, chuck key, extension cable-20 metres, hot wire cutter-40 w, 240v, jig saw (portable)- power range, 300 600 w, 240v + allen, key(eu), metal lathe-1.5kw, distance, between centres 750 mm, including tool bit, boring bar,, knurling tools, parting tools, tail, stock, chuck key, centre drill, dead, centre, revolving centre, face, plate, 4-jaw and 3-jaw chucks., (eu), planer / thicknesser-maximum, planing width 310mm,maximum, thicknesser capacity 230, mm,power range 3kw to 4kw,, 240 v + fence(eu, router (portable)- power range, 1200w to 1800 w, 240v + key, (eu), sander orbital-power range 250, w to 300 w, 240v (eu), soldering iron-80 w, strip heater-140 w, 240v, welding machine-electric arc, 6kw, 150a, 240v (with protective, casing) incluing clamp, cables and, shield. (eu), wood working lathe-distance, between centres 1093 mm, 550, w, 500 - 2000 revolutions per, minute including face plate, dead, centre, revolving centre, turning, tools and tool rest., abrafile frame-4" deep/blade, length 6" (+ blade on frame), adjustable spanner-jaws open : 22, mm length: 200 mm, adjustable spanner-jaws open : 31, mm length: 300 mm, anvil-50kg, bench hook*-material: beech, size:250 mm x 150 mm, bench shear (guillotine)- up to 4, mm sheet and 10 mm rod, bradawl-minimum blade length, 32 mm, carpenters mallet-4.5 head width, centre punch-round head,, knurled body, 4" length, centre square-std size 75 mm, chisels- mortice-size: 6 mm, chisels- mortice-size: 9 mm, chisels -bevelled edge-size: 12, mm, chisels -bevelled edge-size: 19, mm, chisels -bevelled edge-size: 25, mm, chisels- firmer-size: 6 mm, chisels- firmer-size: 12 mm, chisels- firmer-size: 25 mm, cold chisels-type: flat, size:150 mm x 12 mm, combination drill-std drill set, combination pliers-size: 200 mm, coping saws-blade length: 150, mm, corner clamps-cramping capacity, 4" mild steel type, countersunk bit-head diameter:, 3/8" length: 2", dividers-length 6", engineers square-length 6", engineers vice-jaw width: 6", engineer's swivel base table (50, mm), forstner bit-bit set: sizes 10, 12,, 15, 16, 18, 20, 22, 25, 26, 28, 30,, 35, 40, 45 & 50 mm, gcramps-capacity: 6", gcramps-capacity: 12", hacksaw-non-adjustable 12", tubular frame wing nut tensioning, device for 12" blades, hammer: ballpein-0.5 lb, hammer: ballpein-0.75 lb, hammer: ballpein-1 lb, hammer claw-0.5 lb, hammer cross pein-0.75 lb, hand drill-chuck capacity 8 mm, hand files including handles-size:, 6", hand files including handles-size:, 8", hand files including handles-size:, 10", hand saws-22" long - cross cut, hand saws-22" long -rip, inside calipers-arm length 6", jack plane-14" long, jenny calipers-arm length 6", junior hacksaw-length blade 6", machine vice-maximumm jaws, opening 85mm, marking gauge-minimum length, 240mm, marking knife-length of body, 15cm, measuring tape-measuring length:, range 3m to 5 m, metalwork bench-size 2010 x 810, x 800mm, mitre box-mitre block 9" long, (plastic), mole grip-length 7, nail punch-set of 4 nail punches;, 1.5, 2.5, 3 & 5 mm, needle files-set of 6 - 14cm, oil can-2 pints capacity (1-2 pint), oil stone-150 mm length, outside calipers-arm length 6", pincers-length of body: 180 mm, pipe wrench-length: 300 mm, rasps-length size: 200 mm - 350, mm, ring spanner-set 6mm 25mm, riveting machine kit-sets rivets, up to 5 mm diameter, rout