Latest hexagonal bar Tenders | Government hexagonal bar Tenders

State Government

CTN :45684603

06 Jul, 2026 NA

Haringhata - West Bengal

Tender For rate quoted for mgnrega work various material under haringhata block - rate quoted for mgnrega work various material under haringhata block, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket

State Government

CTN :45696571

03 Jul, 2026 NA

Birbhum - West Bengal

Tender For fixation of local market rate (lrm) for supplying of materials (construction plantation materials) for mgnrega work under murarai-ii development block - coal (steam), bitumen vg-30, bitumen emulsion, hire charges of diesel road roller- 8 to 10 tonne, diesel oil, stone screening type a (13.2 mm), stone screening type b (11.2mm), coarse sand, stone aggregate(single size): 06 mm nominal size, grade 1 stone metal 63 mm to 45 mm, 1st class picked jhama bricks(traditional), coloured inter locking c.c. paver block, fine sand, silver sand, portland cement, 1st class traditional bricks (kiln burnt), fly ash bricks(traditional), modular fly ash bricks, modular clay bricks, stone aggregate(single size):20 mm nominal size, stone aggregate(single size): 10 mm nominal size, stone aggregate(single size): 40 mm nominal size, precast cement concrete blocks (nominal mix. 1:1.5:3 with 20 mm down coarse aggregate including supplying at site, laying and finishing the top surface with 1:3 cement mortar), medium sand, udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m, udaypur marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, chawk dungri marble slab ( for wall/dado) 18 mm thick of size 0.3 sq m to 0.6 sq m, ceramic glazed tiles ist quality 300 x 300 mm in all shades and designs of white, ivory, grey, fume red brown etc., rectified - ceramic glazed tiles ist quality 300 x 300 mm or more in all shades designs white, ivory, grey, fume red brown etc, vitrified floor tile 60x60 cm, precast chequered cement tiles 22 mm thick dark shade using ordinary cement, water proofing materials, hire charges of concrete mixer 0.25 to 0.40 cum with hopper, vibrator (needle type 40 mm), hire charges of 5 kva generator, hire charges of 3 kva generator, hire charges of monkey set, hire charges for 5 hp with operator,fuel and shifting etc all charges complete, surface vibrator, water tanker 5000 ltr. capacity, r.c.c. pipes np2 class 300 mm dia, r.c.c. pipes np2 class 450 mm dia, rcc pipe 600 mm dia np- 3 spigot, rcc pipe 900 mm dia np - 3 spigot, rcc pipe 1000 mm dia np -3 spigot, rcc pipe 1200 mm dia np - 3 spigot, empty gunny bag, bamboo (8cm-10cm dia) including fixing, nail, sal bullah (7.5cm -10cm dia), eucalyptus bullah (7.5cm -10cm dia), sal bullah (12.5cm -15cm dia), sal bullah (17.5cm -20cm dia), eucalyptus bullah (12.5cm -15cm dia), eucalyptus bullah (17.5cm -20cm dia), sausage wire net, mild steel tubes hot finished seamless type, galvanised steel corrugated sheets, galvanised steel bolts & nuts 6 mm dia and 25 mm long round head with slots, galvanised steel j or l hooks 8 mm dia, g.i limpet washer, bitumen washer, galvanised steel plain sheets, seam bolts and nuts 6 mm dia and 25 mm long, g.i. plain washer for seam bolts, stainless steel bolts /square bar and plates, welding by electric plant, false ceiling (with 4mm thick pearl designer fibre cement board), supplying, fitting & fixing asbestos corrugated sheet(6 mm thick), supplying, fitting & fixing asbestos ridging, supplying, fitting & fixing zn-al alloy steel sheet work in roof, supplying, fitting & fixing aluminium sheet ridging, fitting and fixing glass reinforced polyester translucent fiber glass sheet, fitting and fixing glass reinforced polyester translucent ridging, fitting & fixing circular corrugated aluminium sheet, tor steel rods/hysd bars/tmt bars (sail/tata/rinl) (fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), tor steel rods/hysd bars/tmt bars (other than sail/tata/rinl/jsw/jspl/shyam/srmb/bmasl/elecrosteel/ssl)(fe415/fe500/fe500d conforms to is: 1786), brick aggregate (single size):40 mm nominal size, moorum, loading unloading & stacking lime, moorum, building rubish and similar miscellaneous material, stone a

CTN :45657218

03 Jul, 2026 NA

Kudankulam - Tamil Nadu

Tender For supply of 8mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 10mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 12mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 16mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 20mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 25mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 28mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786 , 32mm dia reinforcement bar fe500d hysd reinforcement steel confirming to is 1786

State Government

CTN :45447017

11 Jun, 2026 NA

Nadia - West Bengal

Tender For supply of item rate e-quotations for various types of mgnrega materials as per annexure-i under tehatta-ii development block - item rate, 1 st picked class brick, 1 st class brick, 1st class brick bats ( size as direction of eic)., silver sand, fine sand, medium sand, course sand, portland cement, brick aggregrates (single size) 40 mm normal size., stone aggregrates (single size) 40 mm normal size. (without carriage), stone aggregrates (single size) 20 mm normal size.(without carriage), stone aggregrates (single size) 10 mm normal size.(without carriage), stone aggregrates (single size) 5.6 mm normal size.(without carriage), stone aggregrates 13.2 mm nominal size. (without carriage), stone aggregrates 11.2 mm nominal size. (without carriage), 22.4 mm machine made chips (without carriage)., jhama metal kiln burnt. ( size as direction of eic)., thermocol 12.5 mm thick., polythene sheet (150 gm per sqm), hire charges of concrete mixer 0.25 to 0.40 cum with hopper, hire charges of diesel road roller- 8 to 10 tonne, hire charge of shuttering plank(without prop )(25mm-30 mm), hire charge of shuttering plank(with prop )(25mm-30 mm), hire charge of shuttering plank( with prop (30mm 37 mm ), vibrator (needle type 40 mm), steel material- tor steel rods/hysd bars/tmt bars(sail/tata/rinl) (fe415/fe500/fe500d,conforms to is 1786), steel material- tor steel rods/hysd bars/tmt bars(jsw/jspl/shyam/srmb/ssl/bmasl/electro steel)(fe415/fe500/fe500d,conforms to is 1786), ms ornamental grill (above 10 kg/sq.m up to 16 kg/sq.m, nail, 1220. wire mesh (rabbit), glue, 3050. galvanised steel corrugated sheets, 1023. galvanised steel j or l hooks 8 mm dia, galvanised steel bolt & nuts 6 mm dia and 25 mm long round head with slots, g.i lime washere, bitumen washer, stainless steel bolts/ square bar and plates, unslaked lime, supply of first aid box including medicines (specified by pia) at site., display board(ibs), display board(ibs), g.i. wire, coconut rope, sal ballah (10 cm ), sal ballah ( 125 mm ), sal ballah (15 cm ), cement primer(interior), cement primer(exterior), primer( for wood), cement based dust putty, black japan paint, enamel paint for steel grill, synthetic enemel paint in black or chocolate shade., woodwork for door and window frame malayashia sal, panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position butexcluding the cost of hinge and other fittings.(ii) 40mm thick shutters with 19mm thick panel of size 30 to 45 cm.(b) sishu, gamar, champ,badam,bhola, mogra, hallak., supplying, fitting & fixing factory made p.v.c. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, pvc sheet miter, coloured orissa pattern w.c. pan 580x440 mm, vitreous china pedestal for wash basin, vitreous china foot rests 250x125x25 mm, ptmt - liquid soap container of 400 ml capacity, ptmt - towel rail (600 mm), ptmt - soap dish/holder 138x102x75 mm, fan hook, r.c.c. ventilator, vitrified floor tile 60x60 cm, turpentine oil, vitreous china flat back wash basin 450x300 mm, r.c.c. pipes np2 class 450 mm dia, r.c.c. pipes np2 class 300 mm dia, supplying, fitting & fixing 30 mm thick both side prelaminated factory made solid panel pvc door shutter consisting of outer frame made out of m.s. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, m.s. frame shall have cost of steel primers of approved make, supplying, fitting and fixing m.s. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (cost of concrete will be paid separately) (a) 40mm x 6mm, 250mm length, anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to i.s. specification (i.s. 205/66) and fitted and fixed with cadmium plated screws: (vii) 100 x 75 x 4.0mm, anodised aluminium barrel / tower / socket bol

Central Government And Public Sector

CTN :44132093

08 Jun, 2026 NA

Kudankulam - Tamil Nadu

Tender For bid to ras supply of supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 12 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 18 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 25 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 28 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 32 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 36 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 40 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 44 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 50 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 60 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 65 mm , supply and delivery of brass hexagonal bar as per is 4170 with supply length 800 1200 mm width across flat 80 mm

corporations/Associations/Others

CTN :45357015

09 Jun, 2026 NA

Palakkad - Kerala

Tender For auction sale of scattered scrap materials of hysd bar reinforcement

corporations/Associations/Others

CTN :45004950

08 May, 2026 NA

Palakkad - Kerala

Tender For auction sale of scattered scrap materials of hysd bar reinforcement

Central Government/Public Sector

CTN :44783106

28 Apr, 2026 90.70 Lacs

Ranga Reddy-T - Telangana

Tender For tender for supply of procurement of raw materials d d -austenitic type (303 se) free machining non-magnetic bright quality stainless steel round conforming to hal std 1206 / 303 se , astm a 582 / ams 5641 / ams 5640 type 2 / mil-s-7720 , 303 se / bs 303 s 41 , bs 970 / aisi 303 se size dia 8 mm x 2 to 3 meters in length , austenitic type free machining non-magnetic bright quality stainless steel square conf.to hal std 1206 , aisi-303-gr18/10 , sq 35mmx2 to 3 mtrs length , material austenitic type (303) free machining non-magnetic bright quality stainless steel hexagonal bar , specification hal std 1206 / 303 , astm a 582 size a/f 7 mm x 2 to 3 meters in length. , brass rounds confirming to hal std 1302 is 291 , grade-i , 1/2hard , bs 2874-gr.cz-112 , dia 4 mmx2-3mtr.long , aluminium alloy plate , specification en 485-2 , grade enaw6061 , condition t6/t651 (or) specification is 736 , grade 65032 , condition wp (or) ams 4027 size thickness 1 inch (25.4mm)x1250 x 2500 mm. , material aluminium alloy plate , condition t6/t651 , specification enaw 6061 , en485-2 , size thickness 12 mm x 1000 x 1000 mm , al alloy plate thickness 57 mm , temper t651 , spec (6061 , qq-a-250/11)/(6061 , astmb209)/(ams4027)/ (is 65032(hp20) , is736)/(6061-bsh20 , en 573-3/en 485-2) /(enaw6061 , en573-3/en 485-2)/(uni9006/2 , en573-3 , en 485-2) /(din almg1sicu 3 , 3211 , en573-3/en 485-2)/ size 57x 1000 x 1000 mm , aluminium alloy plate , condition t651 , specification 6061-t651 per qq-a-250/11 , size thickness 16 mm x1000 x 1000 mm. , aluminium alloy plate , condition t651 , specification 6061-t651 per qq-a-250/11 , size thickness 18 mm x1000 x 1000 mm. , aluminium alloy plate , specification en 485-2 , grade enaw6061 , condition t6/t651 (or) specification is 736 , grade 65032 , condition wp (or) ams 4027 size thickness 20 mm x1250 x 2500 mm. , al.alloy sheet thickness 1.6 mm , condition t6 , spec 6061 , qq-a-250/11 or qq-a-327 size 1.6 x 1000 x 1000 mm with pvc coating on both sides , aluminium alloy plate , condition t651 , specification 6061-t651 per qq-a-250/11 , size thickness 31.75 mm x1000 x 1000 mm.

Hexagonal Bar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

State Government

Central Government And Public Sector

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector