Latest hexagonal kelly Tenders | Government hexagonal kelly Tenders

Central Government/Public Sector

CTN :45082405

30 Jun, 2026 NA

Duliajan - Assam

Tender For supply of import substitution of items by indigenous development - crome casing pipes, chrome tubing pipes, drill pipes, heavy weight drill pipe, drill collars and lifting plug, drilling stabilizers, drilling/ workover handling tools --- elevators, tongs,, slips etc., potassium formate, solid control equipment --- mud cleaner/ degasser/, centrifuge/ linear motion shale shaker, sucker rod pump (srp) and its accessories:, tubing conveyed sucker rod downhole pump, rod conveyed sucker rod downhole pump, downhole gas separator, downhole anchor catcher, srp fishing tools:, overshot, spares for overshot (grapple, control, guide etc.), srp insert pump, ethyl mercaptan, low shear velocity fluids/polymers, emd chemical dosing pump, reciprocating pump, hsp 20/40, isp 20/40, isp 30/50 mesh, pig tracker/transmitter, pipeline locator, logging cables, tri cone roller drilling bits of various sizes, 11"od standard reverse circulating junk basket & 7.7/8" od reverse, circulating junk basket, pdc drill bits of various sizes, fishing tool; 6.5/8 inches od junk sub for operation inside 8.1/2 inches hole, impression block for 4.5 inch od, 5.0 inch od, 9.625 inch od & 13.375 inch od, casing, pneumatic spinner, 5.1/ 2" premium threaded casing (grade: n80 & grade p110), cased hole logging units with tools and accessories along with, installation, commissioning and training, wireline mast unit, including training and installation& commissioning, oil well explosives: (i) 2-1/8 inch tubing cutter along with detonator and, hardware accessories, (ii) 1-9/16 inch tubing puncher/ circulation charge & hardware accessories, oil well explosives: explosives for baker pressure setting tools: power, charge, primary ignitor & secondary ignitor, procurement of oil well explosives used in exploration and production of, hydrocarbon, (i) deep penetration charges, (ii) resistoriess detonator assy,, (iii) deto cord 80 hmx nylon ls 1.4s, (iv) 54 mm strip carrier, 6spf, 12 ft/3 m long, (v) detocord /charge clips, (vi) tandem connector ,2.1/8" stri p carries, (vii) splice boot for lead wire, (viii) detonator cord retainer, (ix) 53.975 mm (2.1/8") od firing head assy, (x) nut & bolt for connecting strip, (xi) nut & bolt for connect tandem(xii) deto cord end seal (100 nos./pkt), (xiii) 2.1/8" charge tightening wrench, 27.1/2" (698.50 mm) rotary table, 7.1/16" x 10 m double ram bop with accessories, 13.5/8" x 10 m single ram bop with accessories, 3.1/16" x 10 m flexible steel hoses for choke manifold, 3.1/8" x 5 m flexible steel hoses for choke manifold, 2.1/16" x 5m - ss flexible steel hose 3.1/16" x 10m - ss flexible steel hose, 3.1/8" x 5m flexible steel hoses, thermal wellheads for 7" and 9.5/8" casing completion with installation &, commissioning, hose vibrator, rotary hose, drilling in assorted length, 2.34 mm (0.092") piano wireline (well measuring line), static gel strength analyzer, electronic reservoir pressure and temperature measuring gauge., automatic distillation apparatus, ft ir spectrophotometer, rheometer, 350 short ton drilling hook & elevator links (250 short ton, 350 short ton, and 500 short ton), digital acoustic liquid level measuring cum dynamometer equipment, (echometer), cross over, premium box x api eue & pup-joint, 2.7/8", premium in assorted, length, geological thin section preparation unit comprising of cutting, vacuum, impregnation, grinding and polishing equipment and consumables., polarised microscope, pony drill collar, premium tubing, 37.1/2 rotary table, air gas permeameter, double block and bleed isolation plug, gas chromatograph, low to moderate temperature cement retarder, high temperature fluid loss control cement additive, xcd-polymer, xc-polymer (premium), poly anionic cellulose-regular, poly anionic cellulose-super lo, junk sub 5.1/2 inch & 7 inch, 13.5/8-inch x 10000 psi annular bop, 13.5/8-inch x 10000 psi double ram bop., ct reels, super fishing jar, drilling jar, overshots, slammer l

State Government

CTN :45065488

14 May, 2026 1.79 Crore

Bengaluru - Karnataka

Tender For work of re-drilling of 6.5 inch dia existing borewell and errection with all accessories at mahalakshmi layout constituency coming under aee(bw&ps)-1-2 sub division - 25 nos

Central Government/Public Sector

CTN :43369763

07 May, 2026 NA

Bangalore - Karnataka

Tender For bid to ras corrigendum : supply of supply of tools and accessories for lathe drilling machine and tool room precision work d d - h7 - as per sl.no.32 of technical specifcation , hss machinereamer-8 h7- as per sl.no.33 of technical specifcation , hss machinereamer-10 h7 - as per sl.no.34 of technical specifcation , hss machine reamer-12 h7 - as per sl.no.35 of technical specifcation , hss machine reamer-15 h7 - as per sl.no.36 of technical specifcation , hack saw frame- as per sl.no.37 of technical specifcation , hack saw blade - as per sl.no.38 of technical specifcation , ball pin hammer - as per sl.no.39 of technical specifcation , rubber hammer - 2inch- as per sl.no.40 of technical specifcation , combination spanner set - as per sl.no.41 of technical specifcation , lathe dog-bent type -as per sl.no.42 of technical specifcation , lathe dog-bent type -as per sl.no.43 of technical specifcation , lathe dog-bent type - as per sl.no.44 of technical specifcation , lathe dog-bent type - as per sl.no.45 of technical specifcation , bench vice -200mm -as per sl.no.46 of technical specifcation , bench vice -200mm -as per sl.no.47 of technical specifcation , wheel dresser - as per sl.no.48 of technical specifcation , plain combined drill - as per sl.no.49 of technical specifcation , plain combined drill - as per sl.no.50 of technical specifcation , plain combined drill - as per sl.no.51 of technical specifcation , ratchet type wrenches - as per sl.no.52 of technical specifcation , letter punch - as per sl.no.53 of technical specifcation , number punch - as per sl.no.54 of technical specifcation , parting tool - as per sl.no.55 of technical specifcation , parting tool inserts - as per sl.no.55a of technical specifcation , clamp screw - as per sl.no.55b of technical specifcation , wrench - as per sl.no.55c of technical specifcation , parting tool - as per sl.no.56 of technical specifcation , parting tool inserts - as per sl.no.56a of technical specifcation , wrench torx - as per sl.no.56b of technical specifcation , clamp screw - as per sl.no.56c of technical specifcation , parting tool holder- - as per sl.no.57 of technical specifcation , parting blade - as per sl.no.57a of technical specifcation , parting inserts - as per sl.no.57b of technical specifcation , parting tool holder - as per sl.no.58 of technical specifcation , parting blade - as per sl.no.58a of technical specifcation , parting insert - as per sl.no.58b of technical specifcation , screws - as per sl.no.58c of technical specifcation , allen key _spares as per sl.no.58d of technical specifcation , boring bar - as per sl.no.59 of technical specifcation , insert screws - as per sl.no.59a of technical specifcation , boring bar - as per sl.no.60 of technical specifcation , insert screws -as per sl.no.60a of technical specifcation , boring bar - as per sl.no.61 of technical specifcation , inserts for the boring bars - as per sl.no.61a of technical specifcation , insert screw- as per sl.no.61b of technical specifcation , boring bar - as per sl.no.62 of technical specifcation , insert screw- as per sl.no.62a of technical specifcation , boring bar - as per sl.no.63 of technical specifcation , inserts for boring bars - as per sl.no.63a of technical specifcation , insert screw - as per sl.no.63b of technical specifcation , boring bar - as per sl.no.64 of technical specifcation , inserts for boring tool - as per sl.no.64a of technical specifcation , insert screw- as per sl.no.64b of technical specifcation , torx-wrench - as per sl.no.64c of technical specifcation , boring bar - as per sl.no.65 of technical specifcation , inserts for boring bar- as per sl.no.65a of technical specifcation , shim _spares - as per sl.no.65b of technical specifcation , shim pin _spares - as per sl.no.65c of technical specifcation , lever _spares - as per sl.no.65d of technical specifcation , clamp screws _spares - as per //bid details 2 / 124 sl.no.65e of technical specifcation , turning tool - as per sl.no.

CTN :45051247

04 May, 2026 18.92 Lacs

Multi City - Telangana

Tender For bheemgal municipality - "drilling of borewell and installation of submersible motor pumpsets and its accessories in all 12 wards of bheemgal municipality under 15th fc grants"

CTN :45039209

04 May, 2026 3.18 Lacs

Multi City - Telangana

Tender For drilling the bore well and erecting the submersible motor pumpset and its accessories for providing water facility at lambadi ramulu(h) in ward no.27 and at kamala nehru colony hillock area in ward no.29 in armoor municipality

Central Government/Public Sector

CTN :45034528

20 May, 2026 NA

Kozhikode - Kerala

Tender For supply of network device and accessories d d - indoor access point , outdoor access point , distribution switch , 8 port poe switch , 24-port poe switch , wificontroller with license , 8 mp ip varifocal bullet camera , 6 mp ip bullet camera , 6 mp ip vandal dome camera , nvr , vms appliance including license , surveillance hdd for 30 days 24x7 with audio , 24 port gigabit managed poe switch with 4 gigabit 1by10g sfp ports , 24 port gigabit managed poe switch with 4 gigabit sfp ports , 8 port gigabit managed poe switch with 4 gigabit sfp ports , 10ge sfp lr transceiver lc type , 1ge sfp lr transceiver lc type , 24 port enhanced cat 6 fully loaded modular type patch panel , 24 port enhanced cat6 un loaded modular type patch panel , cat 6 keystone jack , 0.3m cat6 utp patch cord , 4x4 pvc camera box , rj 45 connector camera side , horz cable organiserby1ubychannel on front , 9u rack , 6 port fiber liu , patch cord smos2 duplex lc-sc pc type 3m , cat-6 4 pair utp cable with sheath 23 awg copper conductor with 20by25mm pvc pipe and all accessories , rack mountable lgx enclosure 2u size with 14 unloaded slots for lgx cassette , lgx splitter cassette loaded with and sc apc adaptors front cable tray , sc byapc - sc-upc steel armored 3.0 mm patchcord 1 meter , 16x25 pvc casing and cap , 16x32 pvc casing and cap , 50mm pvc pipe with accessories , 24 port loaded liu loaded with splicing charge , 12 port loaded liu loaded with splicing charge , splicing of fibre core , 22u rack 600x600 , cat6 utp cable 23awg solid 305m , concrete drilling 2 inch core cutting , box for 16 splitter and buffer cable , labour charges ) /bid number : gem/2026/b/7484557 * /dated: 29-04-2026 & & / bid document 1 / 37

State Government

CTN :44960306

13 May, 2026 9.15 Lacs

Goa - Goa

Tender For supply and installation of electrical consumables for day-to- day maintenance for a period of 02 years at goa college of engineering. - supply, installation, testing and commissioning of 18 /20 watt led tubelight luminaire complete with all accessories etc. as required of make: bajaj cat no. bclab 20wledp/make: crompton cat no. ccs- 100-20- 65-hl2-dp-nwh;m ake jaquar cat no. lglz01020xw or equvivalent in wipro/philli ps/great white etc as per instructions of the engineer incharge., supply of 9w led bulb , of make panasonic, ( cat no:pbum36093) or equivalent in bajaj/havell s/panasonic/phi lips /jaquar/le gero/orient/bio con. complete as required. (equivalent to be approved by engineer in-charge ), supply and fixing of 2.5 microfarad fan capacitor of reputed brand complete as required., unarmoured pvc /xlpe1100 v cable 2 core 10 sq.mm aluminium, supplying and fixing brass batten/ angle holder including connections etc as required., re-wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm frls pvcinsulated copper conductor single core cable and 1.5 sq.mm frls pvc insulated copper conductor single core cable as earth wire in the existing surface/ recessed steel pvc conduit or casing caping including dismantling as required.; group b, supplying and drawing following sizes of frls pvc insulated copper conductor single core cable in the existing surface/ recessed steel pvc conduit or casing caping including dismantling removing old wires as required.;(11) 2 x 2.5 sq.mm, supplying and fixing following size modular pvc box alongwith modular base and cover plate for modulator switches in recess etc. as required;(i) 3 module cat b, supplying and fixing following size modular pvc box alongwith modular base and cover plate for modulator switches in recess etc. as required;(k) 6 module cat b, wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm fr pvc insulated copper conductor single core cable in pvc casing caping with modular switch modular plates suitable size modular surface box of specified category and earthing the point with 1.5 sq.mm fr pvc insulated copper conductor single core cable etc. as required.;(b) group b -- with cat b modular accessories, supply and erecting of 56 inch (1400mm sweep) ceiling fan double ball bearing type complete with all accessories .; cat b, supplying and fixing 6 a to 32 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(f) sp cat b, supplying and fixing 40 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(f) sp cat b, supplying and fixing 63 a c series mcb suitable for lighting and other loads of following poles in the existing mcb db complete with connections testing and commissioning etc as required.;(j) tpn cat b, wiring for circuit/ submain wiring alongwith earth wire with the following sizes of fr pvc insulated copper conductor single core cable in the independent pvc casing capping of appropriate size as required.;(b) 2 x 2.5 sq. mm + 1 x 2.5 sq.mm earthwire (20mm casing ), erection of wall bracket/ ceiling fittings of all sizes and shapes containing upto two gls lamps per fitting complete with all accessories including connections etc as required., din hrc fuses size size 0 200a, supply installation testing and commissioning of electronic type three phase energy meter (kwh) 4 wire isi marked in polycarbonate or sgheet steel body ( base mounting type) with counter display /lcd display with elt in class 1.0 50 hz 240 v. ac duly tested by mrt along with test certificates complete as required of following capacity of make l & t only.;(c) 50 to 100 a, providing and fixing following capacity tpn disconnector fuse switch unit in ss enclosure without hrc fuses including drilling holes in cubicle panel making co

corporations/Associations/Others

CTN :44985686

30 Apr, 2026 8.07 Lacs

Multi City - Telangana

Tender For drilling of 6.5 inch dia borewell, supply, delivery and erection of suitable submersible pumpset with accessories at gazetted officers colony park ( saradanagar) in 236 ward (hafeezpet), miyapur circle-48, slp zone, ghmc during the year 2025-26 (item.2)

corporations/Associations/Others

CTN :44985689

29 Apr, 2026 11.89 Lacs

Multi City - Telangana

Tender For drilling of 6.5 inch dia borewell, supply delivery and errection of suitabe submersible pumpset with accessories at venkateshwara nagar colony park i in serilingampally circle-49, slpz, cmc (ghmc) during the year 2025-26 (item.7)

CTN :44984526

01 May, 2026 1.61 Lacs

Medak - Telangana

Tender For drilling of borewells and supply of new motor and accessories at opp hanuman temple near govt area hospital ward no 6 in medak municipality under mgf/15th fcg

Hexagonal Kelly Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others