Tender For supply of hand held device for data recording with the following specs: operating system: android 15 or higher, display: 8.7 inches(800x1340pixels)(wxga+) with tft lcd 90hz with multitouch support or higher,connectivity:wifi+cellular(5g) with gps,wifi:802.11a/b/g/n/ac2.4ghz+5ghz, vht80, bluetooth: v5.3,network: physical sim support-5g,usb type-c 2.0, 3.5mm jacks,stereo speaker with dolby atmossensors:accelerometer, geomagnetic sensor, light sensor, proximity sensor, battery: 5100 mah or higher with 15w or higher charging, memory: 8gb ram or higher, storage: 128gb or higher with external microsd support of 2tb or higher, camera: rear:8mp with autofocus,front:5mp, video recording resolution:fhd @30fps or higher, chipset: mediatek helio g99 or equivalent, cpu: octa-core processor@cpu speeds 2ghz or higher, warranty: 3 years oem warranty, accessories:high-definition (hd) tempered glass screen protector and heavy-duty protective tablet case.accepted make: samsung galaxy tab a11, one-plus,redmi or equivalent [ warranty period: 36 months after the date of delivery ] ]
Tender For purchase of electronics and communication engineering practices (equipment) - equipments for electronics and communication engineering practices:, 8051 micro controller kit operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) cpu -lpc2148, core -16/32 bit arm7tdmi-s speed -max 60 mhz, flash -512kb, ram (on-chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converterwith 14 analog inputs, one 10bit d/a converter, six pwm &watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, ask modulation and demodulation kit message signal1:8-bit variable data,amplitude 5v. message signal 2:debounced data, amplitude low (0) and high (5 v). message signal 3:fixed data 25 khz, 12.5 khz, 6.25 khz, 3.12 khz, amplitude 5 v. carrier signal: sine wave, frequency 200 khz, amplitude 5 v. modulator type: switching modulator using analog switch / transistor switching ic. demodulator: envelope detector and lpf. comparator: lm311 based. supply voltage (board): +12 v, +5 v dc. supply current: 100 ma minimum. input voltage: 230 v ac, 50 hz. interface connectors: 2 mm banana socket., dth trainer kitpower supply: 200 v to 240 v ac, 50 hz.dish antenna: 1.5 ft aluminium steerable dish antenna.lnb (low noise block down converter):input frequency: ku-band. output frequency: 950 mhz to 1450 mhz. conversion gain: 65 db. noise temperature: 35 k (max).set-top box receiver in trainer form: if frequency: 70 mhz. video bandwidth: 50 hz to 5 mhz. video output level: 1 vpp at 75 load. video polarity: normal/inverted, switch selectable. audio subcarrier frequency: tunable from 5.0 mhz to 8.0 mhz. remote control provided. hdmi cable: 10 m.controls: channel selection. volume control.fault simulation: five built-in simulated faults for troubleshooting experiments. if signal disconnected. video output fault. audio mute fault. tuner misalignment. rf output interruption.pcb size: 15" 12" with multicolour section-wise block diagram.standard accessories: 1.5 ft dish antenna. lnb. trainer pcb. dish connecting wire. audio-video cable. user manual. acrylic cover. hardware materials for assembly of dish antenna.additional features: dth subscription connection with doordarshanfree channels. free-to-air channel demonstration.
Tender For supply of beta trans data-enx c-flex 120 ohm mvb (2 x 0.5 + 1 x 0.5) data bus and video cable as per huber & suhner part no 85114508. acceptable make/brand: huber & suhner/studer/siechem or exactly same by other oem or authorized dealer/distributer/supplier of oem with valid authorization of dealership. [ warranty period: 30 months after the date of delivery ] ]
Tender For supply of infrared thermometer with video recording and data logging similar to metravi vit-20. specification attahced as annexure a. make/brand : metravi brand model : vit-20 or equivalent or similar reputed make [ warranty period: 30 months after the date of delivery ] ]
Tender For supply, installation, testing and commissioning of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure a attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., single aperture, providing & fixing of wiring accessories oem fabricated f
Tender For sitc of elv equipment in seminar hall and class room at government ayurved, yoga natural chikitsa integrated college, kekri district ajmer -sitc of elv equipment - based on electric bsr 2022, s&f following sizes (dia.) of isi marked virgin material mms ( is:9537 p - iii ) pvc conduit along with isi marked (is:3419-1988) accessories as required in recess including cutting the wall, covering conduit and making good the same as required. for additional technical parameters of product / work refer annexure 'a' attached with this bsr, 25 mm, 32 mm, providing & fixing of iso certified company made virgin material pvc trunking system as per pwd specification for electrical works, with double lock feature for cable management including finishing accessories like corners, tees, adjustable angles, junction etc. as required . the trunking system shall have adaptable system for modular type rj 45 data socket/ wiring accessories/ power sockets and shall be covered with peal off plastic cover. oem shall have submit nabl accrediated /cpet lab test reports before execution & all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr ., 32mm x 20mm, 100/105mm x 50mm, supply, drawing and testing of 4 pair, 23 awg solid bare copper wire insulated with pvc, utp (unshielded twisted pair), category 6, class e, 100 ohm impedance, indoor cable as per latest ammendments of ansi/tia/eia-568 , the copper conductors should be balanced twisted in pairs, seperated by a cross-member fluted pair divider & protected by pvc jacket. certified performance in a 4-connector configuration upto 100 mtrs channel requirements & transmission frequencies up to 250 mhz. in existing ms/pvc conduits/casing capping including making connections to information outlets and patch panels with jack & ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing etc as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , supply and installation of unsheilded/360 degree sheilded information outlets made of high impact plastic body with abs, fr grade halogen free material with provision for protection against dust in jack, suitable for cat 6/6a application complying to latest ammendments, according. to cat. 6/6a channel, it should support channel as well as components requirements of cat.6/6a standards at frequencies of up to 250 to 500 mhz. cat 6/6a unshielded/shielded jack should be suitable to terminate 4 pair, 23/24 awg solid/stranded wire diameters, using 100 ohm unshielded/shielded balance twisted pair cable, the jack should have tooless/impact termination on reliable copper tin plated insulation displacement contact, with easy lock mechanism, it supports iec 60603-7-4 and complied with ansi/tia/eia 568 c.2 standard. jack should be rj11,rj12 & rj45 compatible. should support ethernet 1.2 gb/s atm,digital video and broadband/baseband analog video, voice over internet protocal (voip) specifications in existing modular/ms boxes along with necessory connections as required.all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , cat 6, un-sheilded information outlet, supply & fixing of square faceplate for flush / surface mount information outlets single/dual or quad aperture , material should be pc+abs body, suitable for rj45 unshielded/shielded connection modules. should match with i. o. oem. dimensions should be 86mm x 86mm as required complete in all respect. all as per pre approved by engineer in charge. for additional technical parameters of products/ work , refer annexure "a" attached with this bsr . , single aperture, providing & fixing of wiring accessories oem fabricated following size g
Tender For rfp for selection of an agency for providing on-site comprehensive annual maintenance contract services for ict equipment supplied under the coding and robotics education in schools (cares) scheme in the state of goa on an as is, where is basis - single board computing device (technical specifications: intel x64 processor 64-bit j4105 upto 1.5 ghz, 4mb cache with intel integrated graphics 600memory: 8gb ddr4 2666 mhz ramstorage: 64gb m.2 ssd,connectivity : realtek dual band (ax card) ac 1200 with bluetooth 5.1 mini pciex card, realtek 1 gbps ethernet porti/o: hdmi (upto 4k @ 100hz), 2 x usb 3.0 ports, 4 x usb 2.0 ports, vga port, combo audio jack,100 keys or higher usb keyboard,keyboard type: standard keyboard,lcd monitor:screen size: 19 inch,video conferencing camera,headphone with mic)(1st year cost), single board computing device (technical specifications: intel x64 processor 64-bit j4105 upto 1.5 ghz, 4mb cache with intel integrated graphics 600memory: 8gb ddr4 2666 mhz ramstorage: 64gb m.2 ssd,connectivity : realtek dual band (ax card) ac 1200 with bluetooth 5.1 mini pciex card, realtek 1 gbps ethernet porti/o: hdmi (upto 4k @ 100hz), 2 x usb 3.0 ports, 4 x usb 2.0 ports, vga port, combo audio jack,100 keys or higher usb keyboard,keyboard type: standard keyboard,lcd monitor:screen size: 19 inch,video conferencing camera,headphone with mic)( 2nd year cost), single board computing device (technical specifications: intel x64 processor 64-bit j4105 upto 1.5 ghz, 4mb cache with intel integrated graphics 600memory: 8gb ddr4 2666 mhz ramstorage: 64gb m.2 ssd,connectivity : realtek dual band (ax card) ac 1200 with bluetooth 5.1 mini pciex card, realtek 1 gbps ethernet porti/o: hdmi (upto 4k @ 100hz), 2 x usb 3.0 ports, 4 x usb 2.0 ports, vga port, combo audio jack,100 keys or higher usb keyboard,keyboard type: standard keyboard,lcd monitor:screen size: 19 inch,video conferencing camera,headphone with mic)( 3rd year cost), wifi based router (standard: ieee802.11/a/b/g/n/ac,interface: wan gigabit port, minimum 4 lan gigabit ports.antenna: minimum 4 external omni directional antennas.,data rate: upto 867 mbps (ac 1200),power adapter: ac input: 100-240 v 50hz to dc adapter)(1st year cost), wifi based router (standard: ieee802.11/a/b/g/n/ac,interface: wan gigabit port, minimum 4 lan gigabit ports.antenna: minimum 4 external omni directional antennas.,data rate: upto 867 mbps (ac 1200),power adapter: ac input: 100-240 v 50hz to dc adapter)(2nd year cost), wifi based router (standard: ieee802.11/a/b/g/n/ac,interface: wan gigabit port, minimum 4 lan gigabit ports.antenna: minimum 4 external omni directional antennas.,data rate: upto 867 mbps (ac 1200),power adapter: ac input: 100-240 v 50hz to dc adapter)(3rd year cost)
Tender For corrigendum : supply of active led data wall 13ft x 7ft , look at me camera , conference system delegate unit should wireless , conference system chairman unit should wireless , hybrid video conference system controller , ap transmitter , multichannel aio dps 100w , passive speaker set 5inch wall mount , conference system battery charging unit , network switch , network rack 27u , installation and commissioning