Latest high mast pole Tenders | Government high mast pole Tenders

Central Government/Public Sector

CTN :45713879

20 Jul, 2026 NA

Jorhat - Assam

Tender For repairs to compound wall, fencing and gate with connected items in domestic area and omq area at afs under ge (af) jorhat - demolition of brick work built in cement mortar of any description complete all as specified and as directed., m&l for brickwork (old size) with sub class b bricks, straight or curved on plan exc. 6m mean radius, built in cement mortar (1:6) complete all as specified and as directed., all as per serial item no. 2 here-in-before but except bricks, using old serviceable brick as retrieved from demolition.note : old serviceable bricks obtained from serial item no. 1 above shall re-used., taking down cement plaster on brick or stone or concrete surfaces of walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed., m&l for rendering 15mm thick on fair face of brick works or concrete surfaces of walls with cm (1:4), finishing the surface even and smooth without using extra cement complete all as specified and as directed., m&l for preparation of new plastered surfaces of walls and applying two coats of cement base paint over and including one coat of alkali resistance primer complete all as specified and as directed., demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed., m&l for plain cement concrete (1:2:4) type b-0 (using 12.50mm graded stone aggregate) used as in benching and coping including necessary formwork complete all as specified and as directed., m&l for brickwork with sub class b bricks, straight or curved on plan to any radius in half brick thick walls, built in cm (1:4) complete all as specified and as directed., m&l for dismantling posts or struts (wood, steel or rcc) any section, including taking out embedded portion and making good to disturbed ground surfaces complete all as specified and as directed., m&l for plain cement concrete (1:3:6) type c-2 (using 40mm graded stone aggregate) as in foundation, filling and mass concrete, etc. complete all as specified and directed., s&f hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing, etc. wind ties for roof including securing bolts posts and struts in fencing of size 65x65x6mm including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc. and similar work conforming to fe-290 gde e-165 complete all as specified and as directed., dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed., s&f 11mm to 15mm dia of shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and onehexagonal or square nut, but length of bolt exc. 5cm but n. exc. 10cm complete all as specified and as directed., excavating in post holes (or similar holes) each n. exc. 0.5cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering and removing surplus soil to a distance not exc. 50m and making good surface as in soft/loose soil complete all as specified and as directed., m&l for preparation of new steel and iron surfaces of any description over 10cm width or girth not otherwise described for and applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed., m&l for mild steel tmt bar 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends binding wit

Corporations And Associations And Others

CTN :45733651

07 Jul, 2026 19.20 Lacs

Delhi - Delhi

Tender For providing and fixing of 12m semi high mast pole along with led light fitting at various locations in ward no.-103 keshopur under west zone. nit no.16 item no.01

CTN :45714911

07 Jul, 2026 NA

Kanchipuram - Tamil Nadu

Tender For high mast pole with led flood light

CTN :45720695

20 Jul, 2026 NA

Tikamgarh - Madhya Pradesh

Tender For supply of implant and implant consumable during the year 2026-27 - tens nail ss set, tibia nail ss set, femur nail ss set, proximal tibia plate ss set, distal femur plate ss set, ss wire, k- wire ss, external fixature ss, pfn ss, a.o. clamp, c.c. screw 4.0mm (15mm - 85mm), c.c. screw 6.5mm 16mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm 32mm threaded (25mm - 110mm) (titanium), c.c. screw 6.5mm full threaded (25mm - 110mm) (titanium), cable synthesis, calcancal plate (steel), calcaneal plate (titanium), cancellous locking fully threaded screw 6.5mm, cancellous locking partially threaded screw 6.5mm, cancellous screw 6.5mm full threaded (steel), centre slotted bolt, clavicle nail, d.h.s. plate long barrel (all size), d.h.s. plate short barrel (all angle & size), dcp locking plate narrow, dcp small locking plate (all size), denham pin (all size), dhs screw 60 to 110 mm, distal femoral nail (sizes : width 9-12mm & length 5-35cm), distal radius locking plate ellies type, distal tibia locking plate (5 to 8 hole) anatomic contoured, distal tibia locking plate screw (2.7mm), distal tibia nail sizes (width 8 mm to 10mm) length : 28-38cm., elastic nail / stainless steel nail (size 3 to 4mm) / 10.5, ellis buttress plate (3 to 8 hole) for radium (all size), ender nail (size : width 3, 3.5 & 4mm), female post (1 hole, 3 hole, 5 hole), femur interlocking nail sizes (width : 8mm to 12mm length : 36 cm to 44cm), flexible drill bit (all size), guarded drill bit, half pins, half rings (s.s.) (all size), herbert screw 4mm thickness (titanium), hexagonal socket, hollow connecting rod (8"-20") 10mm, hook plate for olecranon, humerus interlock bolt 3.4 bolt, humerus interlocking nail (all size), 1/3 tubular plate (4 to 8 hole), ilizarov and other external fixator implant, illiosacral screw (all size), inter lock bolt 4.9 mm (length 18 mm to 60mm), interlocking bolt 3.9mm (length 18 to 52mm), italian arch (s.s.), jess fixator / distractor set, k wire bayonet tip, k-nail for femur (sizes : width 7-9mm, length 26-38cm), k-wire (1.8/2.0/2.5mm width) (6" to 9"), k-wire trochar tip, locking cortical screw 3.0mm, locking cortical screw 4.0mm, locking cortical screw 5.0mm, male post (1 hole, 3 hole, 5 hole), malleolar screw 4.5mm (15mm to 95mm), mini plates (non locking) for metacarpal fixation 2-8 hole mini plates, thickness 2.5mm, 6mm to 16mm length, multiplanar clamp, narrow dcp for tibia and hemerus (4.5mm), nuts, olive wires, ordinary bolt, pelvis - contoured plate, spring plate, symphysis plate, proximal (upperend) tibia hokey plate (left and right) 6 to 12 hole, proximal bolt p.f.n. 6.5 mm (60-100mm), proximal bolt p.f.n. 7.5mm (70-110mm), proximal femoral locking compression plaet, proximal femoral nail - long (sizes : width 9-12mm & length 36-42cm), proximal femoral nail - short (sizes : width 9-12mm & length 25mm), proximal humerus locking plate (4-6 hole) philos type, proximal tibia i buttress plate (4-10 hole), proximal tibia locking plate (rt. and lt.) (5 to 12 hole), proximal tibia nail sizes (width 8mm to 10mm) length : 28-38 cm., proximal tibia t buttress plate (4-10 hole), rail road external fix. (8", 10", 12", 16") / lrs, rancho cube (1 hole, 2 hole, 3 hole), reconstruction plate 3.5mm (all size), reconstruction plate 4.5mm (all size), rod to rod clamp, sacroillac screw (all size), schanz pin (2.5,3,3.5,4,4.5mm), schanz pin fixation bolt, screw for mini plates thickness 2.5mm, 6mm to 16mm length, side slotted bolt, simple cancellous screw 4.0mm (15mm-85mm), simple cancellous screw 6.5mm 16mm threads (steel), simple cancellous screw 6.5mm 32mm threads (steel), simple cortical screw 3.5mm, simple cortical screw 4.5mm, small dcp (3.5mm), scanz, square radius nail (width 2,2.5,3 & 3.5mm), square ulna nail (width 2,2.5, 3 & 3.5mm), ss wire (16 to 24 g), steinmann pin (all size), straight plate (2 hole, 3 hole, 4 hole), straight plate with threaded rod - 6 hole, t and l locking buttress (4 to 8 hole), taper

CTN :45708782

13 Jul, 2026 18.81 Lacs

Sattenapalle - Andhra Pradesh

Tender For laying of bt pavement from high mast pole to railway station, in 30th ward of sattenapalle municipality under 15th fc grant -2024-25 (1st installment) untied grant

CTN :45708980

04 Jul, 2026 3.39 Lacs

Multi City - Haryana

Tender For construction of foundation and shifting of high mast pole at various place in m.c. nilokheri.(recall)

CTN :45710257

04 Jul, 2026 5.62 Lacs

Kothagudem - Telangana

Tender For providing, painting and led flood lights for high mast poles mg road at kothagudem municipal corporation under nagarabivrudhi

corporations/Associations/Others

CTN :45721501

03 Jul, 2026 5.68 Lacs

Kanpur - Uttar Pradesh

Tender For s/f of 01 nos. 16.00 mtr. high mast pole alongwith 16 sqmm 4 core armoured cable, led flood light fitting etc at baktauri purwa bingawan, ward-87, zone-03, kanpur.

corporations/Associations/Others

CTN :45721517

03 Jul, 2026 5.70 Lacs

Kanpur - Uttar Pradesh

Tender For s/f of 01 nos. 16.00 mtr. high mast pole alongwith 16 sqmm 4 core armoured cable, led flood light fitting etc at jairam chauraha bingawan, ward-87, zone-03, kanpur.

corporations/Associations/Others

CTN :45725673

03 Jul, 2026 8.62 Lacs

Kanpur - Uttar Pradesh

Tender For s/f of 02 nos. 12.50 mtr high mast pole along with 16 sq. mm 4 core cable, led flood light fitting etc. at rajkiya unnayan basti ground, ward-17, zone-06, kanpur.

High Mast Pole Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Corporations And Associations And Others

corporations/Associations/Others

corporations/Associations/Others

corporations/Associations/Others