Latest high mast tower light Tenders | Government high mast tower light Tenders

State Government

CTN :45621543

29 Jun, 2026 2.73 Lacs

Angamaly - Kerala

Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec

corporations/Associations/Others

CTN :45568626

24 Jun, 2026 NA

Rampur Hat - West Bengal

Tender For supply of electrical consumables items for rampurhat super speciality hospital building g plus 4, rampurhat, birbhum. 2nd call - supply & delivery 1-way 6a modular type switch make: anchor (model- penta) similer legrand/crabtree or as approved by eic., supply & delivery 6a modular type 5 pin plug socket make: anchor (model- penta) similer legrand/crabtree or as approved by eic., supply & delivery 16a modular type switch make: anchor (model- penta)similer legrand/crabtree or as approved by eic., supply & delivery 16a modular type 6 pin plug socket make: anchor(model- penta) similer legrand/crabtree or as approved by eic., supply delivery 3 module frame & cover plate make: anchor (model- penta) similer legrand/crabtree or as approved by eic., supply delivery 6 module frame & cover plate make: anchor (model- penta)similer legrand/crabtree or as approved by eic., supply delivery of 3 module gi box (brand: anchor/legrand/crabtree) equivalent as approved by eic., supply delivery 15a piano key type switch (brand: anchor/havells), supply and delivery 15a flushed type 3/6 pin plug socket (brand: anchor/havells), supply of t8 led tube range integrates led light source with frosted cover design delivering 50- 60% energy saving. make: philips model: mas ledtube 1200mm 18w 865 t8 i – 2100 lm/philips/wipro/orient or equivalent of as approved by eic., supply of mounting rail for single t8 led lamps functional and decorative general purpose basic battens for led tubes. for surface mounting on the wall or ceiling. the channel has a single piece construction made of powder coated white crca sheet steel, eliminating spot welds & hence rust free. the aesthetically designed lamp-holder brackets are side-in-type for ease of, installation/ maintenance. make: philips tmc 502 1xt-led 22w/ wipro/bajaj/orient or as equivalent of approved by eic., supply of mounting rail for double t8 led lamps functional and decorative general purpose basic battens for led tubes. for surface mounting on the wall or ceiling. the channel has a single piece construction made of powder coated white crca sheet steel, eliminating spot welds & hence rust free. the aesthetically designed lamp-holder brackets are side-in-type for ease of, installation/ maintenance. make: philips tmc 502 2xt-led 22w/wipro/bajaj/orient or as approved by eic., supply of 20w 4ft long surface mounting general purpose aluminium battens with best in class luminaire efficacy. these extruded aluminium housing battens are equipped with high specifications cispr 15 compliant electronics driver and milky white special polycarbonate diffuser, for glare free efficient light distribution thd<10% make: philips(model- bn170c led20s-6500 psu l120), similar wipro, bajaj/orient or as approved by eic., supply of recessed mounted round shape 18w downlight which uniquely designed deep recessed and offering visual comfort to users by reducing glare. the all aluminium costruction allowsbetter thermal performance ensuring long product life and better product aesthetics. make: philips(model- dn296b led20s-6500 psu wh ), similar wipro, bajaj/orient or as approved by eic., supply of slim, compact, auminum die cast edge commercial type 6w panel light (cct-6500k). recess mounted square fixture with opal diffuser and separate electronic driver (for lift, cut out- 75mmx75mm) make: havells, philips/wipro/ bajaj/orient or as approved b eic, supply of 23w led bulb cdl type with b22 base. make: philips, bajaj, crompton, havells,wipro as approved by eic., supply of universal type led panel indication lamp, dia 22.5mm red (20nos), yellow(10nos), green(20 nos.) model: operating voltage 24 to 240 vac/vdc make: l&t/siemens as approved by eic., supply of universal type led panel indication lamp, dia 22.5mm blue, white (each 10 nos.) model: operating voltage 24 to 240 vac/vdc make: l&t/siemens as approved by eic., supply of ring type, al lugs size: 16-10 (mm²-e) cat no: als-217 make: dowel, supply o

State Government

CTN :45594064

08 Jul, 2026 39.16 Lacs

Chennai - Tamil Nadu

Tender For supply of versine kit 50mm , versine kit 25mm , straight edge steel 1m , shim feeler gauge , air compressor , hand grinder , bolt tightening machine heavy duty robel , supply of socket hex 41w ejector , digital portable toe load , torque wrench , t handle sq drive , pwi tool kit box , rail thermometer , nose wear gauge , gps based oms machine , rail profile grinder with fixtures for 60 kg rail , fixed base bench vice , rake ballast 4 prong , wire claws 8 prong , pan iron mortar , steel shovel , general spanner ring , tool bag , mechanical jack , screw driver set , double ended spanner , check rail clearance gauge , portable welding machine up to 200a , diesel generator set , philips 200w led flood light , erc clip aplicator and extractor or panpullar for pandrol fastening * /bid number : gem/2026/b/7677013 + /dated: 17-06-2026 ' ' / bid document 1 / 31

Central Government/Public Sector

CTN :45261449

01 Jul, 2026 NA

Nashik - Maharashtra

Tender For corrigendum : supply of 1 wedge , 2 wedge , 3 lh-cutout edge member bottom -fwd , 4 rh-cutout edge member , 5 rh-tee member -sta -4 , 6 bracket-bot -drouge light , 7 bracket-lh-x-5360 , 8 bracket-rh-x-5360 , 9 bottom reinforcement bracket -sta-1 , 10 bracket-lh -x- 5360--top , 11 bracket-rh -x-5360--top , 12 bracket-lh -x-5360- bottom , 13 bracket-rh -x-5360- bottom , 14 cross beam -sta-15- -x-4670- , 15 bracket-lh-bottom floor sta-15to st , 16 bracket-rh-bottom floor sta- 15 to s , 17 beam -sta-13- , 18 bottom frame - bulkhead sta-17- , 19 bottom frame -sta-19- , 20 splice bracket-lh -sta-20- , 21 splice bracket-rh -sta- 20- , 22 bridging bracket-sta-16--17- , 23 bracket- external handle , 24 tee-back up fitting o-b-rh--sta- 25 , 25 tee-o-b rh -gun bay floor--sta- 22 , 26 cover plate-i-b , 27 cover plate-o-b , 28 longeron -air channel - shear wall- , 29 longeron -air channel - shear wall- , 30 shear wall longeron -top- -sta-28 t , 31 shear wall longeron -top- -sta-28 t , 32 tee o-b - lh-top- x-6450 , 33 tee o-b -lh-top- x-6450 , 34 u-c door hinge fitting-i-b-sta-25 t , 35 u-c door hinge fitting-i-b-sta-25 t , 36 u-c door hinge fitting -o-b-lh -sta , 37 top floor-lh_-sta-31 to sta-32- , 38 top floor-rh-sta-31-sta-32- , 39 fitting-outer-lh--wing pickup--sta- , 40 fitting-outer-rh--wing pickup--sta-

CTN :45583802

26 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , miniature circuit breakers (mcb) for ac operation marked to is/iec 60898 (part 1) (q2) , mccb 4 pole 250 amps 36 ka , socket gi 100 mm , led lamp 12 watt type b22 , gi reducer socket 25 x 15 mm , socket gi 25mm , pvc swr pipe of size 75mm 6 feet long , led recessed light 24 watt , copper cable 0.75 sqmm single core , telescopic channel of size 16 inch long , pvc edge bending tape 25mm width 2 mm thick in 50 mtr roll , piano hinges of stainless steel of 6 inch long , tee reducing 25 x 15mm , door stopper aluminium double stay heavy duty , laminated hylum sheet of size 125 x125 x 3mm thick , bulk head fitting 10 watt , seat and back for chair c b steel with or without arms , led tube light 9 or 10 watt , glass pane 3mm thick of size 0.52cm x 0.29 cm as per sample , toilet paper holder cp , plug top 15 or 16 amp , cp bib cock size 15 mm long body , sink ss of size 20 inch x 17 inch for kitchen without d bd , curtain bracket , cp wall mixture 15mm non telephonic , pvc internal fitting for low level cistern , cable joint kit for 120 sqmm , cable joint kit for 150 sqmm , led mirror light 12w , distribution board 4 way spin , distribution board 8 way spin , mcb tpn 100 amp , cable joint kit for 240 sqmm , cable joint kit for 185 sqmm , cable joint kit for 95 sqmm , ppr union 40 mm , submerised cable 06 sqmm copper , mccb 4 pole 100 amps 25 ka , electronic fan regulator 120 watt 5 step 230 v , ppgi sheet 0.5mm thick 10 feet x 3 feet , mccb 4 pole 200 amps 36 ka * /bid number : gem/2026/b/7662412 + /dated: 16-06-2026 ' ' / bid document 1 / 39

CTN :45532322

22 Jun, 2026 NA

Krishnagiri - Tamil Nadu

Tender For procurement of physics lab equipments - procurement of physics lab equipments, ic regulated battery eliminator ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., sonometer apparatus sonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight - 500 gm each to a total of 3 kg. brass wire (5 m), potentiometer apparatus it features a 1-meter to 10-meter constantan/manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., solar cell kit the apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0-5v. light source is provided by led. the illumination intensity of the led can be controlled, wheat stones bridge kit series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements., ohms law verification kit battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin

CTN :45544467

30 Jun, 2026 NA

Bikaner - Rajasthan

Tender For supply of black soil treatment to be done by watered and compacted with plate compactor to consolidate the base , excavation of top soil up to depth not exceeding 150 mm deep and getting sift soil , edge wall providing and fixing masonry edge wall 9 inch wide and 12 inch height including grounded around perimeter of court , 01x10 ft x 15 ft shed with 0 point 5 mm ppgl profile sheet fixed on 50 mm ms tube , three seater stainless steel chair with armrest , digital scoreboard 3x2 , two hockey goal post , four pole with led light 100 watt 20 ft height from ground each flood light will have four led light , drainage system for excess water from ground

CTN :45565611

30 Jun, 2026 5.02 Lacs

Puruliya - West Bengal

Tender For solar high mast tower light

CTN :45475070

18 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For corrigendum : purchase of non-consumables for physics lab in basic engineering (first year) department - purchase, joule calorimeter - copper vessel, battery eliminator 3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0 2a), voltmeter (0-5v), thermometer (alcohol), stop clock, ic regulated battery eliminator- ic regulated, input: 230v ac; output: 0-12v dc in steps of 2v; capacity: 1a or 2a., galvanometer- moving coil type, 30-0-30 scale, unbranded with bhel specification-sensitivity 0.143mm/v, voltmeter- dc voltmeter; range 0 10 v, analog, ammeter- dc (0 - 2 amp), parallelogram apparatus- parallelogram law of forces apparatus fitted with stand, decade resistance box- resistance box 12 month warranty (dial type) -manganin coil- 2 dials, sonometer apparatus- sonometer with meter scale attached along with knife edge, tuning forks set 256, 384, 512 ranges, hammer, slotted weight - 500 gm each to a total of 3 kg. brass wire (5 m), travelling microscope- branded travelling microscope 0 200 mm horizontal and 0-150 mm vertical measurement, potentiometer - it features a 1-meter to 10-meter constantan/manganin wire stretched on a wooden or sunmica baseboard with a millimeter scale. it includes 4mm brass terminals, a pencil jockey for contact, wire options (10 wires), and a typical resistance range of 10-20 ohms, ideal for high-precision voltage measurements., viscosity apparatus stokes apparatus with metre scale attached and long cylindrical glass jar, glass beads small size (1 box), screw gauge (0-15 mm), rheostat - high-grade ceramic tube, oxidized resistance wire, 0.5a 5a, range 10 100 ., deflection magnetometer apparatus - deflection magnetometer apparatus with compass box and two short bar magnets, solar cell kit- the apparatus consist of variable dc power supply, led, solar cell and two multimeters (or an ammeter and a voltmeter). a variable dc power supply of 0 5v. light source is provided by led. the illumination intensity of the led can be controlled, wheatstone bridge kit- series arm: four decade dials in steps of thousands, hundreds, tens, & units of ohms. ratio arm: the ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. two press keys are provided, one marked b is for battery & one marked g is for galvanometer one toggle switch is provided for internal battery a sensitive galvanometer is provided in the bridge., ohms law verification kit- battery eliminator-3a, (2,4,6,8,10,12 v), tubular rheostat 20-3.3a, one way plug key, analog type dc ammeter (0-2a), voltmeter (0-5v), standard resistance coil of 1, 2 ohm (2-set) wound on a wooden bobbin, boyle s law apparatus - the apparatus includes the quill tube, a retort stand, a clamp, and a mounted meter scale. quill tube specifications: length: approximately 50 cm. bore diameter: uniform bore, roughly 1 mm to 2 mm. construction: glass tube with one end sealed. trapped substance: a mercury pellet (or thread) of length 10 to 15 cm is introduced to enclose a column of air. mounting: attached to a half-meter or meter scale., torsional pendulum - torsional pendulum metallic disc, symmetrical masses and pendulum stand, steel wire, compound bar pendulum- one meter long iron strip well painted with holes at a distance of every 5 cm and also with pair of brackets and a heavy base table top stand with stop clock, helical spring apparatus-- structure: a rigid support mounted on a heavy metal base, typically cast iron, to ensure stability during tests. springs: high-tensile steel spiral springs, typically (approx 25 mm) diameter, (100 mm) long. measurement scale: a vertical steel meter scale, usually with (1mm) graduations, for precise deflection measurement. loading mechanism: a, typically (50g), hook-attached weight hanger at the bottom.pointer: a fine pointer attached to the bottom of the spring moves along the scale. accessories: includes a set of slotted wei

Central Government / Public Sector

CTN :45546748

01 Jul, 2026 NA

Guntakal - Andhra Pradesh

Tender For supply of lithium-ion rechargeable battery operated 30 watt cob type led multipurpose locomotive work light having impact resistance construction, corrosion resistance aluminium die cast housing with shock and vibration proof rubberised edge powder coated finish body, swivelling mounting bracket, removeable magnetic base of following specification. wattage: 30 watt, light output: 2800 lumen, ip 54 rated, lithium ion battery 4400mah. make: groz, akita, sanlinkee or similar.[quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

High Mast Tower Light Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

Central Government/Public Sector

Central Government / Public Sector