Latest hoist beam Tenders | Government hoist beam Tenders

State Government

CTN :45365364

04 Jun, 2026 1.69 Lacs

Panchkula - Haryana

Tender For providing and fixing of spare parts of sewer cleaning machine vehicle no. hr- 68-gv-8857 at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3:- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-in- charge 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns items:-providing and fixing of spare part of sewer cleaning machine including cost of 1 no. control valve, 1 mtr. chain 10mm, 2 nos. chain sprocket, 4 nos. 1.5 hose nipple, 1 no. shaft 6 hole including handling and fixing charges complete in all respect to the entire satisfaction of eic.

corporations/Associations/Others

CTN :45224195

06 Jun, 2026 NA

Donimalai - Karnataka

Tender For corrigendum : providing of hiring of earth moving equipments, material handling equipments and cranes (per hour basis) - as per buyer's requirement; mining machine; as per nit

Corporations And Associations And Others

CTN :45363921

01 Jun, 2026 NA

Gurdaspur - Punjab

Tender For supply of spares for instrumentation - "vfd pannel signal isolatorsr. no. 2306042013 make - multispampower supply ac 230 vi/p - 4 to 20 ma dco/p - 4 to 20 ma dcreguire boiler + mill + boiling house ", ash handling air pneumetic vibrator, pu elbow 1/4" one side thread - 10 mm, pu tee 1/4" one side thread - 10 mm, air filter 1/4" -10 mm, pu femal connector 1/4" - 10 mm, pu pipe-10 mm, sov double action 230 v ac 1/4", quick exhaust valve 1/2" cylinder, quick exhaust valve 1/4" for seal, "simens smart positioner sipart ps26 drs 110-0nn0- 0aa0ip 66/type 4xp- 1.4 to 7 barta- 30 dg c to +80 dg c", "dome power cylinder for ash handling model no. c 0631505sr. no. plt 20815/005 bore size 63mmstroke- 305 mmmake- duncam engineering limited (rnoia)", " turbine asco solonoide valve (red had type)brand ascotype - solonoide valve (electrno megnetic) 110 v dc", "limit switchmod no. lswp -1-02-4-a", "cesar bonettitype directional control valvesize / model- nf2pan 520 n00000", "valve limit switch box/ position monitormodel code klplubtg/16/05-26ingress protection- ip67 certifiedvoltage- 110 vdc", "wiring diagram explanation (013)type- close position switch", "product - cee em-45 limit switch model /type - cee em -45-50brand-jai bala ji", "pressure switch (switzer) model no. gm-201-33-b030-55-apressure range 0.4 to 4 bar", "proxy meter sensorsr. no. 23 h01p90output- 7,87 v/mm (200 mv/mil)w/o- 2456make - bently nevada", "siemens smart positioner sipart . ps26dr5 110-0nn0-0aa0ip 66/type 4xpr 1.4 to 7 barta 30 dgr c to +80 dgr c", "m00g pi servo amplifier ( valve driver)supply voltage - 24 vdccurrent 1 to 2 a", "signal conditioner/ isolatermake- pepperl +fuchs model - kfd2- stc5-1.20type- signal isolator/signal conditioner", boiling house hi tech m/c chennai bag clamping power cylinder with o ring kit, bag clamping rubber pad, limit switch for clamping, "plc omran dc - 12 v to 24 v zen 10 c dr - d- v2", smps (power supply 24 v), relay board channels, contector, controller unipluse f 701-s, pu connectors, male 1/4" - 8 mm, push button element no-nc, air filter regulator (afr) (0-10 bar), afr connectors, "load cell 110 kgmodel- 65023-110k-nc-02x make- vishay", proxy for load bucket, load bucket cylinder with kit o ring make janties, course fine cylinder with o ring kit make janties, sov ( solonoide valve) with base and coil make janties coil 220 v ac, coil only 220 v ac, load cell card hi- tech engineers, half inch ball valve (1/2"), "centrifugal machine (raw and refinery) afr (air filter regulator )connector femel - 3/8"" make janties ", "break limit switch make bch electric limited", solenoide valve (sov) single acting single coil with o ring kit, double acting double coil with coil 230 v ac and o ring kit, double acting single coil with coil 230 v ac and o ring kit make energy tech high tech pneumatic, coil 230 v ac for sov, hand operated pnumatics sov wtp high tech engineering, proxy type pnp supply 10-30 v type ps 2000 d make joy shree pune, pug mill valve sheet ( on/ off) size - 300 mm make aira, syrup seperator valve (on/ off) size 150 mm make - i& s system dehradun, r- valve pnumatic 1/4", boiling house refinery mbf control valve- 3" rubber seat, mbf on/off valve- 4" rubber seat, mbf on/off valve- 6" rubber seat, mbf on/off valve 3" rubber seat, melt concentrator 2" rubber seat hot water valve , 0-150 dgr c rtd pt-100 temp transmitter (tt), refinery ph electrode with transmitter, abb flow meter 3" model no. fep 63 y0a20080 a size 3", melt concentrator control valve 12" rubber seat , melt concentrator control valve 10" rubber seat , level transmitter (lt) make abb range 0-5000 mmwc remote seal type, control valve positioner make rotex model rtx 1000 -r-d-2-r1-2g-4r-nd-c-41 serial no. rtx/22/0873, multimeter make fluke, loop calibrator / milium source make masi bus, boiling house and boiler compressor k smart oil 200 l , oil filter element 150 lpm, air filter element, air oil seprator element kit, gasket , air oil seperator element kit ke575

CTN :45366789

19 Jun, 2026 NA

West Kameng - Arunachal Pradesh

Tender For supply of twenty ton bailing machine , hp organic waste grinder , dol motor starter , armoured cabels lugs and allied fittings , installation , handling and transportation

State Government

CTN :45249557

29 May, 2026 50.00 Lacs

Balotara - Rajasthan

Tender For annual rate contract for providing new water service connection with material under division balotra - providing household tap connection as per technical specification and approved drawing as per relevant is code (amended up to date) from hdpe/upvc/di/ac/ms/gi pipe line up to consumer meter/premises by using pp mechanical integrated saddle with inbuilt flow control valve made out of ss316 designed for 5 lpm discharge at 0.5 bar pressure , not exceeding the flow of 7 lpm at 2 bar and a compression elbow, moulded in single piece/ fusion welded (complete job) including digging out suitable size of pits and trench for laying service line in all kinds of soil; depositing and refilling of pit & jhiri with watering & ramming /compacting in layers and disposal of surplus excavated soil as directed with in a lead of 100 meter ; providing & fixing of all fitting duly approved in accordance with specification for potable water including gm full-way valve (is:778 mark) or wheel valve and specials with 20 mm nominal dia mdpe pipe pe 80 pn 16 as per iso 4427 / 20 mm nominal dia ppr-c (three layered) pipe pn16 sdr 7.4 (is:15801:2008) (isi mark) and above ground level using ppr-c pipe with standard ppr fittings/ gi pipes in the premises for fixing a tap / meter box (excluding) ,including accessories with flushing, cleaning, disinfecting and testing of pipe line complete required for making of service connection complete in all respect including labour charges . the service line should be laid at least 45 cm below ground level. note: road cut and restoration is not part of this item and paid separately. for connection with 20 mm dia mdpe/ppr-c pipe length up to 05 mtr. rate is exclusive of gst., road cutting for house hold service connection in minimum trench width wherever road crossing is required. road cutting of cement concrete,wbm, black top etc. of all thickness shall be done by using a concrete cutter machine keeping minimum trench width and restoration of the road with cement concrete with pcc m-10 and cc m-30 grade as per specification and direction of engineer in charge.(06 meter) rate is exclusive of gst., add extra over item no 1.21, 1.22 & 1.23 for providing 20 mm pe 80 pn 16 as per iso 4427 mdpe pipe including excavation, providing, laying & jointing of service line above 5.00 mtr. rate is exclusive of gst., road cutting charges for pit of size 1.0x1.0 mtr for providing connection dismantling of cement concrete pavement for pipe line and chambers by mechanical means using pneumatic tools, cutting the peripheral edge by cc cutter, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 meters. measurement for dismantled trench to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, re-handling of material/earth to complete the tasks as per technical specification and scope of work. (0.30 cum) rate is exclusive of gst., road restoration charges for pit of size 1.0x1.0 mtr for providing connection providing and laying in position cement concrete m10 grade nominal mix 1:3:6 (1 cement : 3coarse sand : 6 graded stone aggregate 40 mm nominal size) in base course complete including all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement for cc work to be made as per standard trench width specified in tender document and no extra payment shall be made be made for trench width more than specified, complete work as per technical specification and scope of work. (0.10 cum) rate is exclusive of gst., providing and laying in position cement concrete in specified grade over prepared base course complete including finishing, curing, all material, labour, machinery, lighting, guarding for road restoration work in trenches of pipe line and chamber work. measurement

CTN :45233930

05 Jun, 2026 NA

Nashik - Maharashtra

Tender For dev of rafale 5 lines - ammunition box dolly, inflation rack, pylon launcher trolley, pylon hoisting beam, gun dolly

Central Government/Public Sector

CTN :44925702

18 May, 2026 NA

Goa - Goa

Tender For corrigendum : supply of retrieval pump as per encl , nitrogen cylinder water capacity 50 ltrs approx , portable trolley for handling cylinder 100 kg approx , portable refrigerant leak detection kit as per encl , slider lever grease gun with all accessories as per encl , pistol grip grease gun with all accessories , set of files as per encl , set of forged pliers as per encl , circlip remover internal , circlip remover external , electric hand held manual engraving machine as per encl , automatic center punch as per encl , measuring tape steel 300 mm , sounding tape stainless steel as per encl , vice bench parallel 125 mm quick release type , vice bench parallel 150 mm , metal tool box as per encl , hot air blowers for improving insulation of panels , vaccum cleaner hand as per encl , industrial portable vaccum cleaner with 900 w motor , portable wet vaccum cleaner , portable spray painting gun machine , high pressure washer as per encl , multi range portable conductivity meter as per encl , portable ph meter with 0.1 ph resolution , clamp on ultrasonic flow meter pipe dia 50 200 mm , portable vibration meter as per encl , portable usb high speed dvd of reputed make , portable usb hard disk 1 tb of reputed make , snap on battery as per encl , portable digital multimeter , soldering iron 25 watt flux soldering wire 20 mtrs , digital insulation tester , battery capacity tester , ac dc clamp meter , digital oscilloscope , rf power meter , cable power detector , power quality analyser , optical power meter , endoscope set recording , snap on mirror uim2lm , magnifying lens with light , heavy duty magnets , buffing machine , portable electric grinder as per encl , portable heavy duty grinder as per encl , hydraulic nut cracker as per encl , screw stud extractor as per encl , digital clock as per encl , inclinometer , air blower as per encl , spring balance , spanner wheel 12 , battery powered 2.0 ton lister as per encl , bicycle , tricycle , snap on set of adjustable wrenches as per encl , snap on combination wrench set as per encl , snap on ratchet combination wrench set as per encl , snap on ring end wrench set as per encl , snap on open end wrench set as per encl , snap on insulated open wrench set as per encl , snap on insulated hex key of size mm 3 4 5 6 8 10 , impact socket set as per encl , snap on t shape speeder wrench as per encl , snap on l hexagonal short arm key set as per encl , snap on l hexagonal long arm key set as per encl , snap on pliers locking std grip curved jaw as per encl , universal wrench set snap and grip key wrench , heavy duty straight pipe wrench od size 6 8 12 24 48 . , heavy duty offset pipe wrench of size 14 18 24 inches , aluminium straight pipe wrench of size 10 12 and 18 one each , snap on interchangeable head typ torque wrench as per enc , universal torque wrench for 10 100 nm , cordless impact wrench as per encl , stroboscope as per encl , non contact digital tachometer , non contact thermometer as per encl , ultrasonic level detection kit as per encl , hydrocarbon analyzer for pol tanks as per encl , kitiwake coolant analysis kit as per encl , kitiwakelub oil analysis kit as per encl , pol lab test apparatus incl //bid details 2 / 95 accessories as per encl , universal temperature calibrator as per encl , portable high temp precision calibrator as per encl , smart press calibrator as per encl , portable hydraulic flushing kit as per encl , m25 spanner square typ , m20 spanner open end , foot pump as per encl , centre punch

Central Government/Public Sector

CTN :44809471

08 May, 2026 NA

Ranchi - Jharkhand

Tender For corrigendum : design, engineering, manufacture and supply of belt vulcanizing machine including accessories as well as testing and commissioning of the equipment, required for bauxite storage, handling and secondary crushing package for 1.0 mtpa alumina refinery stream _ 5 of m/s national aluminium company limited _nalco_ at damanjodi, odisha.

Central Government/Public Sector

CTN :45064002

23 May, 2026 NA

Ranga Reddy-T - Telangana

Tender For supply of ring spanners set , allen keys long ball point set (1.5 to 10 mm) , allen keys long ball point set (1/16 to 3/8 inches) , hand oil pump , grease gun (lever type) , bucket grease pump with trolley , hydraulic bottle jack 2 ton , hydraulic bottle jack 3 ton , hydraulic bottle jack 5 ton , hydraulic bottle jack 10 ton , bench vice with fixed base , needle files set 140 mm , needle files set 160 mm , drill driver , billet level /spirit level , torpedo level/ spirit level , combination spanner set , shallow offset ring spanner set crv , adjustable wrench 8" , adjustable wrench 12" , long nose plier 6" , long nose plier 8" , plier circlip external (bent) , plier circlip internal (bent) , plier circlip straight external , plier circlip straight internal , curved lock plier mat handle , straight jaw locking plier , slotted screw driver , pipe wrench , hacksaw frame with blade , sledge hammer with wood handle , bearing pullers , line testers , small angle grinder(4 inch) , blower , heavy duty heat gun , welding helmet , mixed tools set , 3 in 1 mobile tools storage box , handheld torch light , polyster webbing sling lifting belt for crane hoist material handling. , combination spanner set (inches) , torque wrench ( 5 to 25 n-m) , torque wrench ( 10 to 50 n-m) , impact drill machine , pipe wrench 450 mm-18" , 1/4 inch sq. drive socket set 6 pt met , oxygen acetylene torch kit (used 13 1 for welding, brazing and cutting) , 1/2 drive pear head ratchet set metric , double open end spanner set

corporations/Associations/Others

CTN :45033657

20 May, 2026 35.17 Lacs

Jhansi - Uttar Pradesh

Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars

Hoist Beam Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors