Latest hoist motor Tenders | Government hoist motor Tenders

CTN :45291537

05 Jun, 2026 2.99 Lacs

Darjeeling - West Bengal

Tender For tender for supply of repair maintenance and servicing of eot crane 2 ton - servicing and maintenance of cranes 02 ton an all allied works with load test. , bridge & cross traverse rail alignment by clamps fitting/ adjustment , replace repaire dsl or ip supply cable on long travel , replace current collector for smooth operation , hoisting motor 5.2kw , 3ph , sc servecing only , cross traverse motor 0.55kw , 3ph , sc servecing only , long travel motor 2.2kw , 3ph , sc servecing only , bridge wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , trolley crab wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , hoock block maintainance and replacement of defective part any of pullies , rope lock , pulley bearing , thurster bearing , cover fastners , replacement of hoist wire rope dia 12 6 nos 36 fibre core , hoist assembly maintenance and replacement of defective part any of coupling , brake shoes , bearing , spacer , shaft , gear. , equiliser pulley maintenance and replacement of defective part any of pulley , shaft , bearing , maintainance for span of the crane within limit , it must not wear wheels on either sides of flanges , maintainance for diagonals of crane within the limit , it must not wear flanges of lt wheels or must not get jam of lt motion , rubber buffers replacement , limit switch for any of motion long travel cross traverse hoisting ) , relay maintenance or replacement with accessories , cross traverse cable replacement , cross traverse cable trollies maintenance or replacement

corporations/Associations/Others

CTN :45192961

26 May, 2026 5.76 Lacs

Jhunjhunu - Rajasthan

Tender For regular operation and maintenance of water supply scheme with material at industrial area, residential colony and commercial complex jhunjhunu phase-i and ii - item rate, regular operation of tube wells installed with pumping machineries with round the clock monitoring, including complete repair and maintenance of pump set with cost of material and labour required for repairing/rewinding, lowering and un-lowering etc.the scope of work also includes repair and maintenance of panel board, main switches, kit-kates, electric connections, service cableand submersible cables inclusive of cost of material and labour required for uninterrupted functioning of tube wells.it is also inclusive of complete repair and maintenance of pipes connected with pump and motor, its replacement, if required, regular upkeeping of log book etc. and other works as mentioned in tender document / scope of work complete in all respect and as directed by engineer in-charge., regular operation and maintenance of pump houses located at wss complex/complexes.the work includes operation of distribution line main valves for daily supply of water of the industrial area at supply times specified by corporation. regular operation of pump house installed with existing centrifugal / monoblock pump / motors, with round the clock monitoring, including complete repair and maintenance of pump sets, connecting suction/delivery pipes jointing material, panel, main switches, kit-kates, electric connections, service cable including cost of material and labour required for repairing / rewinding, removal and replacement etc. for uninterrupted functioning of electric panels and pump sets with regular up-keepment of log books, repair of leakages in pump glans and ms/ci/ac pipeline system inside of wss campus complete, regular chemical dosing in cwr maintaining general cleanliness at pump house and wss campus complete in all respect as directed by engineer in-charge., repair & maintenance of existing distribution / rising main pipe line system consisting of ac pressure pipeline /pvc/upvc/hdpe/ci/ di lines for maintaining smooth water supply in area covered under the scope of work.the scope of work includes timely repairing of leakage in all existing distribution / rising main pipeline of all sizes by digging out suitable size of pit in soft & loose soil / hard soil including cutting of bituminous / cement concrete / wbm / wmm surface at any site of work at no extra cost.it is also inclusive of cutting of pipe ends, fixing of pipe pieces with jointing material to make repair leak proof and refilling the pit / trench by excavated soil by ramming it at all sides of pipes & upto ground level. contractor will do dewatering at his own level by making necessary arrangements, if required. contractor will usetheir own t&p and jointing materials, however the pipe line and sluice valves (if required) etc. shall be provided by the corporation but the contractor shall have to deposit the damaged material in riico store. but no additional payment shall be made on account of any material or transportation charges.

corporations/Associations/Others

CTN :45273191

28 May, 2026 1.95 Lacs

Chandigarh - Chandigarh

Tender For repair of centrifugal pump 360 hp motor and other works at water works sector 32 chandigarh ch to revenue head

Central Government/Public Sector

CTN :45227697

03 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For supply, erection, testing and commissioning of cable drag e chain system in 5 ton ac eot crane holding capacity of main hoist motors 12.0 hp, long travel motor 9.0 hp cross travel motor 3.5 hp having span length of 14.5 meters with details of necessary copper cables and accessories enclosed separately. (note: existing old festo cable trolley system has to be removed and handover to railway) make: igus, tsubaki, kabelschlepp, mitool, contol well, silverline, cks, rs component & contro only. [ warranty period: 12 months after the date of delivery ] ]

CTN :45241360

01 Jun, 2026 NA

Kharagpur - West Bengal

Tender For supply, installation ,testing and commissioning of main hoist motor for eot crane no 57 ct/38 slip ring induction motor details frame id - frame - 225m f.la - 46, kw- 24.8, v - 400 v, rpm - 960, r.v - 270, r.a - 80 with suitable coupling and both side shaft.note# slip ring motor starting method should be compatible with stainless steel punch grid resistance box. make: siemens, marathon, bharat bijlee, abb india, crompton greaves power, and kirloskar electric. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45188912

21 May, 2026 1.55 Lacs

Chandigarh - Chandigarh

Tender For repair of single centrifugal pump coupled with 360 hp motor and other works at water works sector 26 chandigarh ch to revenue head

Central Government/Public Sector

CTN :45183309

04 Jun, 2026 35.00 Lacs

Sonitpur - Assam

Tender For repair/maintenance of centrifugal submersible, mono block pump and motor starter/panel and allied work under ge (s) tezpur

Central Government And Public Sector

CTN :45167110

02 Jun, 2026 NA

Bangalore - Karnataka

Tender For wire rope hoist of 2t capacity confirming to is-807,3938 with hoist carrier for ct movement to suit 150 mm rail width as per the following specification. equipment : electric wire rope hoist; capacity : 2000 kgs ; duty & class : class iv heavy duty; height of lift : 5.0 mtrs; rail size : 150 mm width, 450 mm height ; hoist head room : 900 mm ; hoist speed : 3 mpm; ct speed : 12 mpm; hoist motor : squirrel cage induction motor 5 hp with brake , tefc sq. cage induction motor 3.7kw / 5hp , 4 pole , class f insulation , 415v , 3 ph , flange mounted , frame size 112m with dc operated electromagnetic brake of minimum braking capacity of 5 kgm, continously rated; ct motor and brake specifications :squirrel cage induction motor power : 0.37 kw , pole : 4, efficiency : ie3 , frame : 71m , mounting : b5 flange , brake : electromagnetic disc type spring loaded ac fail safe brake of min torque : 0.6kg.m; voltage : 415v , phase : 3 phase , compressed spring length : 40 mm , air gap : 0.5 mm; hoist & ct gearbox : helical / spur gear combination. all gears inside the gearbox shall be of en-24 material with hardness of 40-45 hrc. mtc and htc from nabl accredited lab should accompany the supply. wire rope : round strand steel wire rope conforming to is 2266 latest and is 6594 latest size : 10mm or 12mm , 4/1 falls construction : 6 x 36 . drum : seamless pipe of suitable dia & shell thickness to accommodate wire rope single layer as per is-2062; hook : forged heavy duty single shank typeplain hook as per is-3815, 360 swivel type with spring loaded safety latch. control panel :consists of mcb, olar, fuse, etc. note: (a) test certificate for hook shall accompany the supply (b) make of bearings: skf/ntn/fag/timken only. (c)the firm shall furnish inspection certificate from manufacturers or their authorised testing agents preferably incorporating the details of traceability of the bearing. (d) all gears inside the gearbox shall be of en-24 material with hardness of 40-45 hrc. mtc and htc from nabl accredited lab should accompany the supply (e) make of motors: ngef / abb / lhp / cg / hem /bharat bijlee only; (f) make of electricals: siemens/ge/alstom/l & t/abb only ;control voltage: 110v ;supply voltage: 400/440v, 3 phase 50 cycles. (g) guarantee: 12 months from the date of commissioning or 18 months from the date of supply, whichever is earlier. [ warranty period: 18 months after the date of delivery ]

Central Government / Public Sector

CTN :45160212

19 May, 2026 NA

Multi City - Telangana

Tender For auction sale of depot miscellaneous scrap - 128001eot26k, pl- 98325061- 40000 kgs. scrap cond.u/s. eot 40 tones capacity, m&p no.1619.consisting of the details- 1) main hoist motor: 1 capacity-88 kw/118hp, qty- 01no. (2) auxiliary hoist motor- 23kw/30hp-01 no. (3) long travel motor 9kw/12hp-01 no. (4) cross travel motor 17.5 kw/23hp-01 no. (5) inching motor 9kw/12hp-01 no. total motor-05 nos, total copper content-140 kgs (approx). note: delivery by weighment basis. gas cutting permitted for the purpose of loading. note:1) custodian should make the premises clear to facilitate easy loading of the material. he should allow the vehicle inside, up to the location without any hindrance to the movement of vehicle of the purchaser. note: 2) custodian is advised to take all precautionary measures to avoid fire accident while gas cutting. purchaser has to make his own arrangements for cutting, lifting and loading of material and also any other equipment for the purpose and delivery of material. purchaser has to take all safety precautions/care for men & material while gas cutting and lifting of material. location: bin no 8001, power cars shop sc end/cws-lgd. custodian- sse/millwright/ws/lgd, controlling officer- cwm/ws/lallaguda, hsn code- 84261100. gst-18 percent. ss no: s/sd/lgd/insp/2026-27 dt 02.03.26 delivery on actual weighment basis only. special note: overload of the carrying capacity of the vehicle will not be permitted at the time of taking delivery

State Government

CTN :45131530

18 May, 2026 4.95 Lacs

Jaipur - Rajasthan

Tender For nit work of repair and strengthening of foundation of centrifugal motor pump at various pump house under uwss chomu, sub div chomu, district jaipur

Hoist Motor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors