Latest hoisting system Tenders | Government hoisting system Tenders

Central Government/Public Sector

CTN :45374561

05 Jun, 2026 NA

Dahod - Gujarat

Tender For auction sale of depot ferrous scrap - scrap released from lcw and others consist of ms plate , ms cutting , ms wire, flooring plates, ms pipe , galvanise pipe , rod, doors ofsort and sizes broken and damaged condition with or without attachment of rivets,nuts, d.v. valve, tarrate of ms scrap, all type of silent blocks,released girders,shock absorbers,equilizer beams,memu bolsters,all types of brake beams,bolts,hinges,pieces of angles, angle coke, plates channels,plates and small pieces of ms items tower wagon engine frames , tie cyl tank ,bar, hand pump ,pipe,cottan steel dors and c s items rail releated all items etc.(except wta items, rail,spring, & other non ferrous items ) corroded and dented with or without rust old used and unserviceable for railway use. miscellanious cast steel/ms scrap released from lcw and others consist of solid angle & channel ,lever rod,ms rod/salliya,tie bar,erc trolly parts and wheel solid pipes,solid chains ,chequered plates, steel sleepers(bridge used),all size equalizing beams, bed plates(bridge used) clamp,pool ,ms patti,and plates, rod, buffer, tools,bit,sabbal, number plates, all types of rail releated items servo motor ,brake cylinder,ci items , brake hea ,rod,angle, channel, girder ,spring, cyl .tank,ohe items , hoist crane machine parts,clamps pully shock abjorber ,ctrb related scrap like as cup, cone, race, inner, draft gear, glude joint, traction frame, electrical ms frame,pieces of garder , small pieces of rail, solid cutting ,side barrier housing, solid nut-bolt,pin, and other pieces of cast steel item/ms etc with minor attachment of inseperable non ferrous material (except- wta item). fdp 40 days. (02 nos. cutting will be allowed for easy loading). material should be loaded with one end from lot as per description. mode of delivery by actual weight.

State Government

CTN :45330287

22 Jun, 2026 7.64 Lacs

East Nimar - Madhya Pradesh

Tender For work contract for extension of hpcf room eot hoist rail, fabrication of platform at debris filters, replacement of service water line, installation of gate valves in hvac plant, fabrication of cabin and various racks, fabrication of mot tube bundle

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

CTN :45291537

05 Jun, 2026 2.99 Lacs

Darjeeling - West Bengal

Tender For tender for supply of repair maintenance and servicing of eot crane 2 ton - servicing and maintenance of cranes 02 ton an all allied works with load test. , bridge & cross traverse rail alignment by clamps fitting/ adjustment , replace repaire dsl or ip supply cable on long travel , replace current collector for smooth operation , hoisting motor 5.2kw , 3ph , sc servecing only , cross traverse motor 0.55kw , 3ph , sc servecing only , long travel motor 2.2kw , 3ph , sc servecing only , bridge wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , trolley crab wheel assembly maintenance and replacement of defective part any of wheel , bearing , spacer , shaft , coupling , brake , gearbox , hoock block maintainance and replacement of defective part any of pullies , rope lock , pulley bearing , thurster bearing , cover fastners , replacement of hoist wire rope dia 12 6 nos 36 fibre core , hoist assembly maintenance and replacement of defective part any of coupling , brake shoes , bearing , spacer , shaft , gear. , equiliser pulley maintenance and replacement of defective part any of pulley , shaft , bearing , maintainance for span of the crane within limit , it must not wear wheels on either sides of flanges , maintainance for diagonals of crane within the limit , it must not wear flanges of lt wheels or must not get jam of lt motion , rubber buffers replacement , limit switch for any of motion long travel cross traverse hoisting ) , relay maintenance or replacement with accessories , cross traverse cable replacement , cross traverse cable trollies maintenance or replacement

CTN :45188765

28 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of others - 1] cond. premier single grade e.o.t crane 05 ton capacity span 14040 mm , qty- 1 set, location- stalled above line no. 4-5 in new shed at diesel shed/bmg/hwh, 2] cond. eot crane class iii heavy duty 10/3 ton capacity , qty- 1 set, location- stalled above line no. 1 in hoist area at diesel shed/bmg/hwh. condition- 1] materials will be sold on as is where is basis, 2] cutting and uninstalling allowed with maintaining all safety measures at the time of delivery by the purchaser in his own cost , 3] purchaser has to make own arrangement for lifting of sold materials, 4] runway rail and crane runway beams are excluded from the sale.

State Government

CTN :45257436

20 May, 2026 20.99 Lacs

Patna - Bihar

Tender For annual maintenance (oiling & greasing), overhauling, p.c.c.work, platform, rubber seal, vent cleaning, painting, partial civil work and hoisting system etc. of anti flood sluice gate situated at simariya - gorgama embankment under flood control division, bounsi (banka) and running of mechanical ambulance during flood period 2026 ( from 02 july 2026 to 30 september 2026 = 90 days )

Central Government/Public Sector

CTN :45254945

11 Jun, 2026 NA

Bangalore - Karnataka

Tender For design, manufacture, supply, installation testing and commissioning (without machine room) of passenger lift for 13 nos. passenger (884 kg capacity) g+4, complete with hand rail, voice announcement system in car (to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator/lift) along with all associated accessories as per cpwd. as per cpwd specification for electrical works (part-iii - lifts & escalators)2003 with latest amendments. the elevator shall be compatible for 1. harmonized guidelines for ---for accessibility and provision of facilities for persons with disabilities(divyangan) in indian railways as per enclosed rb guidelines. 2. ip based video surveillance system as per rdso spec enclosed with provision of cameras as per specification. 3. the technical parameters and facilities suggested vide swr hqrs letter enclosed the elevator shall be with cctv inside the lift car connecting to security systems through wireless/wifi and audio announcement features compatible to integration with existing security systems if any. the rate for camc for a period of 5 years after the completion of regular warranty period of 2 years to be quoted separately apart from the rate of elevator to evaluate the offer. supply cost includes warranty period of 24 (twenty-four) months from date of commissioning. [ warranty period: 24 months after the date of delivery ] ]

CTN :45235066

25 May, 2026 9.42 Lacs

Allahabad - Uttar Pradesh

Tender For providing and installation of double girder circular eot crane 5 ton with electrically operated hoist class ii duty geared travelling trolley with seven meter control lift complete with long travel rail track 40 mm sq.bar moveing or cross girde

CTN :45126696

23 May, 2026 10.16 Lacs

Malda - West Bengal

Tender For complete replacement of 02 nos draw shutter,03 nos flap shutter along with guide channel and hoisting system at bhogadanra, block ratua ii, malda under mahananda embankment division

CTN :45126697

23 May, 2026 10.62 Lacs

Dinajpur - West Bengal

Tender For complete replacement of 07 nos draw shutter, guide channel along with hoisting systems at hili border near srirampur, and block hili, under south dinajpur irrigation division.

Hoisting System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector