Latest holders Tenders | Government holders Tenders

Central Government/Public Sector

CTN :45092093

15 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of switch plate assembly complete with polycarbonate cover frame and powder coated steel plate with 4nos. on-off switches and 1no.3-pin socket 6a,250v with 2nos. 1.0 amp glass fuses with fuse holders of m/s shawmut / cooper bussmann/ equivalent for lhb eog non ac scn coaches as rcf spec.edml 086 rev-8 and drawing no.-cc74247, alt.-g, item -1make ssk / record oswin / crabtree/ sks/ salzer / cpl. note to be procured from oem or its authorise dealer. [ warranty period: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :45087021

13 May, 2026 NA

Thiruvananthapuram - Kerala

Tender For auction sale of others - battery in sorts and sizes 1) battery 12 v, 42/45 ah (exide/hbl) - 141 nos., 2] battery 12 v, 7 ah - 14 nos., 3] battery 12 v, 180 ah - 1 no., 4] battery charging kit 24 v with 2 nos of 42 ah battery each - 6 nos., 5] battery charging kit 12 v with 1 no. of 42 ah battery each - 4 nos., 6] battery 12 v, 26 ah ( exide/hbl) - 140 nos., 7] battery 12 v, 100 ah (exide) - 61 nos., 8] battery 12 v, 65/75 ah (exide/hbl) - 56 nos., 9] battery 6 v, 120 ah (amararaja - 10 nos & hbl-11 nos) - 21 nos as is where is basis. total qty - 7.120 mt. [condemned, unserviceable, defective]., custodian : sr. section engineer-electrical-power-thiruvananthapuram central. location : items stacked at store area of sse-electrical-power- thiruvananthapuram central [tvc]. note- delivery to be made on actual weighment basis. special conditions: - 1] segregation of the material is strictly not permitted. 2] valid cpcb certificate holders should only participate in the auction and delivery should be against valid central/ state cpcb book holder only., 4] sucessful bidder has to submit the copy of the pcb certificate along with delivery request, 5] purchaser [by engaging his own labourers] is permitted to load the items and hand over the non - ferrous and excess quantity to the custodian., nfs/side assets : 1] any excess qty/attached cable found during delivery shall be handed over to custodian., 2] so many materials are kept nearby being working shed. [p.l. no. 98414010, hsn code : 854810, gst - 18 % on fcm], item : battery on wighment basis. [image attached].

State Government

CTN :45084701

26 May, 2026 5.06 Lacs

Guntur - Andhra Pradesh

Tender For supply of shower heads , angle valve cock , slimline single flush tank lever handle , dual flush knob button for single piece closets , soap holders , soap holders , sintex nipples , sintex nipples 1 , slimline single flush tank syphon set , standard seat cover for western water closet , seat cover screw hinges , health faucet gun , faucet gunwall hook set , waste pipe flexible , waste pipe flexible for wash basin , cpvc , cpvc pipe 1 , cpvc pipe 2 , cpvc pipe 3 , cpvc pipe 4 , cpvc pipe 5 , cpvc coupling 1 , cpvc coupling 2 , cpvc pipe coupling 1 , cpvc pipe coupling 2 , coupling 3 cpvc , cpvc pipe coupling 4 , cpvc tee 1 , cpvc tee 2 , cpvc tee 3 , cpvc pipe tee 1 , cpvc pipe tee 2 , cpvc pipe tee 3 , cpvc l-bow 1 , cpvc l-bow 2 , cpvc l-bow 3 , cpvc l-bow 4 , cpvc l-bow 5 , cpvc l-bow 6 , brass l-bow , tee elbow , brass elbow , brass tee , brass fta 1 , brass fta 2 , drain cleaner packets , brass fta , fitting cpvc , reducers cpvc 1 , reducers cpvc 2 , reducer cpvc 3 , bends cpvc , fixuture cpvc , cpvc clamp 2 , cpvc clamp 3 , cpvc dummy 4 , cpvc dummy 5 , cpvc dummy 6 , cpvc dummy 7 , water tap aerators foam , health faucet wall hook set , drain cleaning plunger , renderock plug , silicon sealant , spun filters , ro membrane high flow , frt flow restrictor , smps adopter 24v , elite sediment filter , elite carbon filter , big pump , selonoid valve sv , allen key set , wood cutting blades , iron cutting blades , aluminum cutting blades 1 packet , wall cutting blades 1 packet , 2 in 1 screwdriver , spirit levels , plastic gahmela , digging bar , hoe with wooden , aluminium drill bit kit , wooden drill bit kit , door stoppers , door magnets , box wrench , ended spanner set cs 6 to cs 22 , hacksaw blade with frame , ss aldrop size 10 inch , aluminium aldrop 12 inch , ss aldrop size 1 , ss hinges size 2 , ss hinges size 3 , ss d type handles 1 , ss d type handles 2 , door closer set , h type handle set with lock , concrete drill bit 2 to 18 size set , pipe wrench 1 , pipe wrench 2 , monkey plier multipurpose , floor trap , hacksaw blades , wood screws size 1.5 inch box , measurement tape , measurement steel tape , measurement cloth tape , aluminium self thread screws 1.inch box , aluminium self thread screws 0.75 inch washer head box , aluminium self thread screws 0.75 inch box , 1.5 china nails box , 38mm plastic wall plugs packets , 1inch flexible hose water pipe , adjustable wrench , kit drilling , chipping machine medium weight 5kgs , heavy duty hammer drill machine , hand cutting machine , wood,tiles and marble cutting machine , laser distance measurer

Central Government/Public Sector

CTN :44895674

07 May, 2026 NA

Sundergarh - Odisha

Tender For bid to ras tender for supply of insert for tool holders and cutters - as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification , as per attached specification

Central Government/Public Sector

CTN :45086267

26 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For supply of 2023323, sen holders

CTN :45084591

15 May, 2026 NA

Jhansi - Uttar Pradesh

Tender For supply of j2 knd niv camp 43 container food plastic 5 point 5 ltrs , k5 7330-000232 measure conical 5 ltrs , j2 7310-000116 colburner choke tube , j2 7310-000120 cobl cap filling mk ii , j2 310-000126cobl pump rod , j2 7310-000127 cobl pump spring , k1 7125-000041 cabinet storage meat and milk mk-ii , k1 7320-000158 table folding cook house mk-iv ss top , k1 7320- 000023 meat chest , k1 8530-000008 holders soap shaving mk-2 , k5 3740-000076 sprayer hand anti insects , k5 8530-000012 brushes nail mk-ii , k6 6530- 001480 basin wash aluminium , k6 330-000021 scoop hand flour mk-2 , j2 7330-000195 pressure cooker 6 ltr complete , j2 7330-000220 pressure cooker 22 ltr complete , k6 5120-423117 uc 4-6 men set slab wooden , k6 7240-000546 bucket ss 215mm 6l with lid , k6 7330-000078 uc 45 men set degchie 305 mm , k6 7330-000080 utensil cooking 45 men set degchie 330mm

CTN :45083165

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l. no.98057054.scrap melting gr-d consisting of cutting sol bar, fall plate, head stock, cutting outside panel, celling fan down rod, wagon door & body cutting part, driver seat assly., trough floor, electrode holder, cab window assly. psycostyle machine, trolley, plate cutting, angle cutting, iron axle with pipe, cover of tail light head light flasher etc, tie bar fencing, pipe cutting, structure cutting, cut pieces of rod, damage emu door, lubricating felt assembly frame, mvmt,tmb,emu,mvsi impeller,mvsi duct, air duct, fan chamber, electrical pillar box, compression spring of bk cylinder, inter/after cooler tube type, lid of grease drums, partition frame, cattle guard, ms base, l.t. panel box ferrous, , tap changer, expanded metal, vsb packing, bs door, iron window, ms rod , fire extinguisher, gate, nut , bolt, washer, wick felt carriers, pin, angle frame with or without net, r.s. joint, ms iron plate, angle, door shutter, cutting chain, net box, fencing wire and such materials fit for melting gr-d, except p-way materials such as rail, fish plate and non ferrous etc. note-some items are attached with negligible quantity of ss.qty-135mt.location-north of link road, east of inner boundary wall. condition-two days advance cutting is allowed for loading purpose only.

CTN :45086286

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneous scrap - lot no.m.vehicle.exmp.gsd/kgp.05.2026-27.01 [8.001 + 0.500 (nvd) = 8.501 mt] approx. description- condemn motor vehicle (our offer) (i) condemned diesel hydraulic road mobile crane, cap-15 ton, m/s. escorts, chassis no. 1976005620, engine no. ktz905073=01 no. as in the lot in one place at ¿gsd/kgp. special conditions: (1) before bidding, all the bidders may inspect the lot and should satisfy themselves about conditions of lot. (2) loading will be done by purchaser¿s own arrangement. (3) lot will be delivered in number as per lot description as mentioned above, but not exceed total quantity 8.501 mt approximately. (4) on receipt of request for delivery from purchaser or his power of attorney holder along with certified copies of sro (sale release order). (5) cdms/1606/scrap yard/mkt/kgp will issue delivery program. (6) weighment of lorry i.e. tare & gross has to be done electronic weigh bridge at gsd/kgp. (7) safety equipment during cutting to be arranged by the purchaser for his staff and ensure its use. (8) all the delivery witnessing official is advised to read and understand the terms and conditions and satisfy by themselves before effecting delivery. in this regard necessary assistance may be given by cdms/g/gsd/kgp. (9) the body part of the vehicle should be loaded at last. (10) other terms & conditions are as per e-auction condition.

CTN :45086304

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/30/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) er 72029562906 bobrm1 (wm) 2) er 72029661692 bobrnm1 (wm) 3) nr 75039260183 bobsnm1 (nlb) 4) se 75079218106 bobsnm1 (nlb) 5) cr 75019260158 bobsnm1 (nlb) 6) se 10079617986 boxnm1 (nlb) nb: (1) : i) wagons are to be sold with 04 nos. wm trolleys against srl. no. 01 and 02. ii) wagons are to be sold without 08 nos. nlb trolleys against srl. no. 03 to 06. ii) wagons srl no 01 to 06 to be sold without 24 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

CTN :45086305

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of rolling stock - lot no.divn/nmp/29/05/26-27/bg/cond./8w/wgn. description- iron and steel scrap cutup parts of bg cond.8w/wgn. without contents if any. 1) se 75079260648 bobsnm1 (nlb) 2) nr 75039160568 bobsnm1 (nlb) 3) cr 75019260103 bobsnm1 (nlb) 4) se 75079215020 bobsnm1 (nlb) 5) er 75029060830 bobsnm1 (nlb) 6) special repair 75069260054 bobsnm1 (nlb) 7) nr 75039188050 bobsnm1 (nlb) 8) cr 75019208051 bobsnm1 (nlb) 9) nr 75039160810 bobsnm1 (nlb) 10) nr 75039160520 bobsnm1 (nlb) nb: (1) : i) wagons are to be sold without 20 nos. nlb trolleys against special repairl. no. 01 to 10. ii) wagons special repairl no 01 to 10 to be sold without 40 nos. wheel sets with ctrb, brake cylinder complete, brake gear complete, hand brake set complete with connecting link, bush, seam less pipe with fitting for air brake equipment, distributor valve, apm valve, sab, coupler body with shank wear plate, knuckle, knuckle pivot pin, coupler yoke, yoke pin, yoke pin support with wear plate, high capacity draft gear with draft gear follower, etc and other excluded fitting as per latest excluded fitting list * * excluded fitting list letter no. m2/c-19/e.ftg/ 1302 dt.25.10.2023, nb(2): special condition for rolling stock- a) all excluded fitting along with nlb trolleys are to be handed over by the purchaser to sse/w-yard/nws/kgp and wheel sets to sse-44/nws/kgp respectively at nominated location suggested by the concerned sse respectively for which they have to arrange labour,tools & equipment for loading of the excluded items from cutting site and then transport it to nominated location by their own arrangement/vehicle. they have to unload and stack the excluded materials by their own arrangement including labour and hand over the same to concern stock holder with clear acknowledgement. (b) the excluded fittings should be kept away from the cutting lines and adjacent areas so that future grounding of rolling stock is not hampered in any way. the delivery of cut pieces of last 10 percent of lot size (subject to minimum of 01 no. rolling stock) will commence only when all excluded fittings arisen out of sold lot has been successfully handed over to custodian. (c) delivery witnessing official will record following certificate on sale delivery register. "purchaser has cleared all nil value item arisen after cutting of sold rolling stock and there is no left over available at cutting site. (d) the rolling stock may either be on the cutting line or grounded and may or may not have trolleys/wheel set attached but the purchaser needs to shift to concerned location as advised by concerned sse. (e)the purchaser is required to take adequate safety measures so that no railway property in near vicinity of the cutting spot/ loading point and unloading point is dam aged in any way. the purchaser will be responsible for any damage/fire accident to the railway property caused during operation and delivery, and also he will be solely responsible of any loss applied (railway employee or any other person) caused due to any activities involved while dismantling /cutting, transportation loading and unloading of all excluded fittings of the wagons. including wheel sets and trolleys. nb: (3) the firm shall follow all rules regarding the loading of vehicle as per rto/statuary body governed time to time. railway will not be responsible any breach of rule during loading /transportation done by the purchaser. nb: (4) delivery will be given in numbers.

Holders Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

Central Government/Public Sector

Central Government/Public Sector