Latest holding bracket Tenders | Government holding bracket Tenders

Central Government And Public Sector

CTN :42629518

17 Nov, 2025 NA

Tinsukia - Assam

Tender For supply of gi hot dip perforated type cable tray wall mountable of dimension (width 300 mm, height 50 mm, tray minimum thickness 2.0 mm) along with two nos. coupler plate and minimum 08 set of nut-bolts & washers for coupling. the tray is to be supplied along with all the required accessories for wall mounting such as support brackets, nut-bolts, washers, fasteners & clamps etc. width of support bracket shall be minimum 380mm so that tray can be mounted at a distance 50mm from wall. the quantity of support bracket and associated accessories should be suitable for supporting & mounting of cable-tray at a distance of 2 meter or less . support brackets, coupler plates, nut-bolts & washers, fasteners & clamps etc. shall be of either stainless steel (ss) or hot-dip galvanized iron (gi). galvanizing hot dip shall be as per is 2629/4759 for cable tray and associated accessories. make:

Central Government/Public Sector

CTN :42629644

11 Nov, 2025 NA

Mumbai - Maharashtra

Tender For supply of set of fasteners of supporting device

CTN :42614969

21 Nov, 2025 NA

Jammu - Jammu And Kashmir

Tender For supply of fasteners engine to gearbox , adapter , hose , seal , joint , nozzle , gasket , ram seal , spring , o ring

Central Government/Public Sector

CTN :42604290

19 Nov, 2025 NA

Tiruvallur - Tamil Nadu

Tender For fasteners procurement c c - screw ht , m8 x 35 , mc , pc 8.8 , blk , is-1364 , bolt ht , m10x 40 , mc , pc 8.8 , gi , is-1364 , bolt ht , m10x 45 , mc , pc 8.8 , gi , is-1364 , bolt ht , m10x 50 , mc , pc 8.8 , gi , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-10x60mm , ht-bolt-is1364 , pc8.8-gi-mc-10x70mm , bolt ht , m12x 40 , mc , pc 8.8 , gi , is-1364 , bolt ht , m12x 50 , mc , pc 8.8 , gi , is-1364 , bolt ht , m12x 60 , mc , pc 8.8 , gi , is-1364 , bolt ht , m12x 70 , mc , pc 8.8 , gi , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-m12x100mm , bolt ht , m16x 50 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x 60 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x 70 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x 80 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x 90 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x100 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x110 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x120 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x130 , mc , pc 8.8 , gi , is-1364 , bolt ht , m16x150 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x 70 , mc , pc10.9 , cd-cot , is-1364 , bolt ht , m20x 80 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x 90 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x100 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x110 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x120 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x120 , mc , pc10.9 , cd-cot , is-1364 , bolt ht , m20x130 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x140 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x180 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x220 , mc , pc 8.8 , gi , is-1364 , bolt ht , m20x260 , mc , pc10.9 , gi , is-1364 , bolt ht , m20x300 , mc , pc10.9 , gi , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-24x50mm , screw ht , m24x 60 , mc , pc 8.8 , blk , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-24x90mm , bolt ht , m24x100 , mc , pc 8.8 , gi , is-1364 , bolt ht , m24x110 , mc , pc 8.8 , gi , is-1364 , bolt ht , m24x120 , mc , pc 8.8 , gi , is-1364 , bolt ht , m24x120 , mc , pc10.9 , cd-cot , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-24x125mm , bolt ht , m24x130 , mc , pc 8.8 , gi , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-24x140mm , bolt ht , m24x150 , mc , pc 8.8 , gi , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-m24x170 , bolt ht , m27x120 , mc , pc 8.8 , gi , is-1364 , bolt ht , m30x100 , mc , pc 8.8 , gi , is-1364 , bolt ht , m30x140 , mc , pc 8.8 , gi , is-1364 , ht-bolt-is1364 , pc8.8-gi-mc-30x160mm , bolt ht , m36x160 , mc , pc 8.8 , gi , is-1364 , bolt ht , m45x270 , mc , pc 8.8 , gi , is-1364 , screw hex-is2269 pc-12.9-ft-mc-24x50mm , screw , hx skt hd , m24x90 , pc12.9 , mc , is2269 , screw hex-is2269 pc-12.9-ft-mc-30x230mm , nut- hex , ht , m8 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m10 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m12 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m12 , gr10 , gi , mc , is-1364 , nut- hex , ht , m16 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m16 , gr10 , gi , mc , is-1364 , nut- hex , ht , m20 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m20 , gr10 , gi , mc , is-1364 , nut- hex , ht , m24 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m24 , gr10 , gi , mc , is-1364 , nut- hex , ht , m27 , gr 8 , gi , mc , is-1364 , nut ht , m 27mm , pc-10-cd-cot , mc , is-1364 , nut- hex , ht , m30 , gr 8 , gi , mc , is-1364 , nut- hex , ht , m36 , gr 8 , gi , mc , is-1364 , washer , punched-a , 10mm , gi , is-2016 , washer , punched-a , 12mm , gi , is-2016 , washer , punched-a , 16mm , gi , is-2016 , washer , punched-a , 20mm , gi , is-2016 , washer , punched-a , 24mm , gi , is-2016 , washer , punched-a , 27mm , gi , is-2016 , washer , punched-a , 30mm , gi , is-2016 , washer , punched-a , 36mm , gi , is-2016

CTN :42604677

20 Nov, 2025 NA

Tiruvallur - Tamil Nadu

Tender For c20b250041 procurement of fasteners - bolt , nut , hex , and 2pwash , gi , is 1364 , 6x25mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 6x40mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 6x50mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 8x25mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 8x40mm , hbolt w/2nuts and 2washers , cs , is1364 , 18x50 , bolt , nut , hex , and 2pwash , gi , is 1364 , 8/75mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 10x25mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 10x50mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 10x75mm , bolt , nut hex and 2washer , is 1364 , ht , m12x55mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 12x40mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 12x80mm , bolt , nut , hex , and 2pwash , gi , is 1364 , 12x75mm

Central Government/Public Sector

CTN :42606498

26 Nov, 2025 53.25 Lacs

Dipka - Chhattisgarh

Tender For supply of spares for kirloskar pump for water supply - rotating assemble bronze fitted, model dsm150 by 46 part no subrua2 or equivalent , gland, bronze,model dsm150 by 46 part no dsm15046br223 or equivalent , wear ring moc bronze, model dsm150 by 46 part no bronze190 or equivalent , round lock nut, c 20,model dsm150 by 46 part no 3361 or equivalent , shaft sleeve de and nde moc bronze, model dsm150 by 46 part no dsm15046br310 or equivalent , bearing housing unit, std,model dsm150 by 46 part no subbhudsm46 or equivalent , set of fasteners, moc m.s,model dsm150 by 46 part no ssof1 or equivalent , shaft sleeve bronze,model dsm4rm part no 310 or equivalent , round lock nut c 40,model dsm4rm part no 335 or equivalent , bearing housing unit, moc std,model dsm4rm part no subbhudsm4 or equivalent , set of fastners ms,model dsm4rm part no ssof1 or equivalent , rotating assembly bronze fitted model dsm4rm part no subrua2 or equivalent , top and bottom assembly ci, model dsm4rm part no staba01 or equivalent , gland moc bronze,model dsm 100 by 36 part no 223 or equivalent , rotating assembly, model dsm 100 by 36 part no subrua2bronzeftd or equivalent , wear ring bronze, model dsm 100 by 36 part no 190 or equivalent , bearing housing unit, std,model dsm 100 by 36 part no subbhudsm36 or equivalent , shaft sleeve de and nde moc bronze, model dsm 100 by 36 part no 310 or equivalent , bearing lock nut or bearing nut, model dsm 100 by 36 part no 335 or equivalent , set of fastners moc ms,model dsm 100 by 36 part no ssof1 or equivalent , wear ring lt br, model dsm4rm part no 19000110 or equivalent , split gland, moc bronze, model dsm4rm part no dsm4rmbr229 or equivalent ) /bid number : gem/2025/b/6834979 * /dated: 05-11-2025 & & / bid document 1 / 26

Central Government/Public Sector

CTN :42283705

11 Nov, 2025 NA

Bhavnagar - Gujarat

Tender For corrigendum : supply of details description of specification for 100 watt led flood light - led rating in warm)/system wattage/rated power, led luminaire conformity to 15:10322/part 5/section 5/2012 latest and 15: 16107, (part 2/sec 1):2012, photo biological safety of leds used shall be as per 15:16108/2012 (exempt grou, types of led luminave as per the 15: 161070part-2/sec-11/2012, types of led modules as per the 25: 16103(part 2)/2012, led rating/system wattage/rated power, luminaire system efficacy bumen/watt), ingress protection (ip rating) as per 1 10322 (part 1): 1982 latest, mounting brackets fincluded, warranty for free replacement (in year), input operating voltage range and frequency, automatic higher cut off voltage above 300 volt, rated voltage, ac power factor at hill load, driver efficiency lin sage), total harmonics distortion (in lage), the total circut power shall not be more than 110 percent of the valve declared, by the manufacturer, led chip efficacy, colour temperature (+500), working life for led (minimum 50,000 buming hours as per lm-80 report), coltur rendering index(cri), optic lenise materal (uv stabilued) (write na or without optic lense supply), heat sink should be die-cast aluminum along with sufficient heat sink fins to desipate heat effectively, capacitor shall be ratail for a temperature of 105 deg. ceblus or better, junction temperature, operating temperature range, operating humidity range, short circuit protection, overload protection, over voltage geutection, reverse polarity, high voltage test (1.5 kv for ane minute between napply terminats and body of the, unit), insulation resistance between earth and current carrying part, the luminaire shad be protected against surges and transients (internal), the luminaire shall be protected against surges and transients of >/1kv, (external, the luminaires casing/housing (single piece housing) shall be pressure de catted, aluminum alloy with higher thermal.conductivity, the lummaire body must be corrosion resistant epoxy powder couted, all fasteners must be of stainless steel, the entire housing (both led section and driver section) shall be dust and water proof having ip 66 protection as per 15:10322 (part 11:1987 latest, luminaries light transparency should be of toughened glass, toughened transparent glass cover thickness, toughened glass shall not get discolored shall not suffer degration due to heat and agning within warranty period, number of electronic control gest (power sanoles), driver components shall be industrial grade or above, pci shall be fre grade minimum 0.8 to 1.0 mm thick or mom, the luminaires works on single phase three wires system (phase, neutral and, earth, suitable connector shall be provided for led connection between driver output, and led, length of st marked three cors wire (shall be provided along with supply of, materiall, ught source, manufactures name and and brand on the aluminium die cast body, manufacturer's name, model number, serial number, date of manufactiare (month-year), and int number as identification mark inside each unit and the outside of each packaging box, the operation characteristics voltage and power be marked inside of each led, system must have emi/emc compliance as applicable (test reports shall be furnish on demand by buyer/consignee)

CTN :42146369

15 Nov, 2025 NA

Mumbai - Maharashtra

Tender For corrigendum : supply of 1000443569 procurement of oem sipl make seal spares at bpcl mumbai refinery d d - s300245000716 , 58.96.20.010.5 - o ring sipl s601343700079 , 58.96.20.011.5 - seat sipl s300245000049 , 58.96.20.012.5 - o ring sipl s601335000213 , 58.96.20.013.5 - shaft sleeve sipl s300431603058 , 58.96.20.014.5 - o-ring sipl s601343700003 , 58.96.20.015.5 - int gland assy sipl s300531601282 , 58.96.20.016.5 - o ring sipl s601343700086 , 58.96.20.017.5 - gland assy sipl s300531601284 , 58.96.20.019.5 - set ring sipl s300331602194 , 58.96.20.020.5 - assy fixture sipl s405131600010 , 58.96.20.021.5 - adapter sipl s301031600417 , 58.96.20.022.5 - plug sipl s408131600003 , 58.96.20.023.5 - set of fasteners sipl pn 8 10 11 13 , 58.96.21.002.5 - seal face sipl s306044000273 , 58.96.21.003.5 - seal face pn 1 1 2 in s306044000143 sipl , 58.96.21.004.5 - thr ring psipl s301131600058 , 58.96.21.005.5 - driver sipl s300331601984 , 58.96.21.006.5 - sprng slv sipl s300427600018 , 58.96.21.007.5 - spring sipl pn 1 1 6 in s401700400012 , 58.96.21.008.5 - o ring sipl pn 1 1 8 in s601343700054 , 58.96.21.009.5 - o ring sipl pn 1 1 9 in s601335000120 , 58.96.21.010.5 - seat sipl pn 1 2 in s300245001477 , 58.96.21.011.5 - o ring sipl pn 1 3 ins601343700090 , 58.96.21.012.5 - seat sipl pn 1 4 in s300245000066 , 58.96.21.013.5 - o ring sipl pn 1 5 in s601335000540 , 58.96.21.014.5 - shaft slv sipl pn 2 in s300431603060 , 58.96.21.015.5 - o ring sipl pn 3 in s601343700093 , 58.96.21.016.5 - adapter assy sipl pn 4 in s301031600372 , 58.96.21.017.5 - locking ring sipl pn 5 in s305631600952 , 58.96.21.018.5 - ret ring sipl pn 6 in s305630200213 , 58.96.21.019.5 - o ring sipl pn 7 in s601343700121 , 58.96.21.020.5 - cover assy sipl pn 8 in s300631602835 , 58.96.21.021.5 - o ring sipl pn 9 in s601335000076 , 58.96.21.022.5 - set ring sipl pn 11 in s300331601185 , 58.96.21.023.5 - assy fixture sipl pn 13 in s405131600003 , 58.96.21.025.5 - cover assy sipl pn 8 in s300631603094

State Government

CTN :42313037

13 Nov, 2025 1.29 Crore

East Nimar - Madhya Pradesh

Tender For corrigendum : procurement for spare parts of 32,5 vimt 2000, 72 pa bhel make air preheater installed in phase i at 2x600mw, sstpp, mppgcl, dongalia - machined t-bar for he & ce with ht fasteners (m16x60-1000 nos, plain washer -1000nos) (1 set=1 set for he & ce for 1 aph), gratings (1 set= 48 nos), rotor angle (1 set=1 set for he & ce for 1 aph), bypass seal angle (1 set=1 set for he & ce for 1 aph), air sealing housing assembly (1 set=1 set for gb & sb for 1 aph), stationary spool seal ring assembly along with retainer cover (with all fasteners), pinion, worthington hub/qd bush (01 set=01 no. hub & 04 nos. of bolts), air motor, model no. ipm-400, 8:1 make: iec dusterloh, fluid coupling, 14.5 fcu, make- pembril/fluiodomat (with resilient driving plate & multidisc coupling), over running clutch, model no . fso 600, make formsparg (or) daido (or) reynolds (or) ringspann, hot end sector plate along with static seals on both sides and modified type adjuster block assembly (1 set=03 sector plates with static seals on both sides in each sector plate and modified type adjuster block assemblies in each sector plate with all fasteners), cold end sector plate along with static seals on both sidesand modified type adjuster block assembly (1 set=03 sector plates with static seals on both sides in each sector plate and modified type adjuster block assemblies in each plate with all fasteners), by pass bar assembly , deluge pipe assembly (1 set= 1 pipe for he + 1 pipe for ce), wash pipe assembly (1 set= 1 pipe for he + 1 pipe for ce), soot blower pipe (lrnr soot blower as per bhel drawing no. 1-52-340-02378), soot blowing worm gear box (lrnr soot blower)

CTN :42547178

14 Nov, 2025 NA

Chittoor - Andhra Pradesh

Tender For procurement of network equipment required for ttd information center and sv temple jubilees hills in hyderabad , supply and fixing of 6u wall mount 600 mm width x 500mm depth rack with cable manager, powermanager, fasteners and fan,supply of 24 port gigabit with additional 4 gigabit sfp ports web managed switch,supply of 8 port un managed switch,supply and laying of cat 6 utp cable (305 mtrs),supply and installation of 24 port loaded cat 6 patch panel,supply and fixing of cat 6 i/o module,supply and fixing of single face plate,supply and fixing of back box for single and dual face plate,supply of 1 mtr cat 6 utp patch cord,supply of 2 mtr cat 6 utp patch cord,supply and laying of pvc pipe 1 inch square / round - one rmt,supply and laying of pvc pipe 1.5inch square/ round - one rmt,supply and laying of pvc pipe 2.5 inch square / round - one rmt

Holding Bracket Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government