Get complete information related to latest Holding Clamp Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Holding Clamp Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Holding Clamp Tenders.
Tender For supply of various type non-centralized material - supply of holdingclamp for st pole sp-33 with n&b., supply of holdingclamp for st pole sp-55 with n&b., supply of holdingclamp for pcc pole with n&b., supply of lt clamp for pcc pole with n&b., supply of stay clamp for pcc pole with n&b., supply of earth wire clamp for pcc pole with n&b., supply of lt clamp for st pole sp-23 with n&b., supply of earth wire clamp for st pole sp-23 with n&b., supply of lt clamp for st pole sp-33 with n&b., supply of suspension clamp with eye hook., supply of earth wire clamp for st pole sp-33 with n&b., supply of dead end clamp with j hook., supply of lt shackle insulator size 75x90 mm with n&b.
Tender For supply of various type non-centralized material - supply of stay clamp for st pole sp-21/23 with n&b., supply of cable clamp with n&b., supply of holdingclamp for st pole sp-33 with n&b., supply of holdingclamp for st pole sp-55 with n&b., supply of bracing clamp for st pole sp-55 with n&b., supply of lt clamp for st pole sp-21 with n&b., supply of lt clamp for st pole sp-55 with n&b., supply of lt clamp for st pole sp-23 with n&b., supply of lt clamp for st pole sp-33 with n&b., supply of suspension clamp with eye hook., supply of dead end clamp with i hook., supply of lt shackle insulator size 75x90 mm with n&b., supply of stay insulator., supply of j-hook., supply of stay clamp for st pole sp-55 with n&b.
Tender For supply of various type non-centralized material - supply of stay clamp for st pole sp-21/23 with n&b., supply of holdingclamp for st pole sp-33 with n&b., supply of holdingclamp for st pole sp-55 with n&b., supply of holdingclamp for pcc pole with n&b., supply of lt clamp for pcc pole with n&b., supply of lt clamp for st pole sp-21 with n&b., supply of lt clamp for st pole sp-55 with n&b., supply of lt clamp for st pole sp-23 with n&b., supply of stay clamp for pcc pole with n&b., supply of lt shackle insulator size 75x90 mm with n&b., supply of stay insulator., supply of stay clamp for st pole sp-55 with n&b.
Tender For corrigendum : supply of de-centralized materials and works for increasing capacity and installation of tf under business plan 2025-26, edd-kachhawa - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, x-arms holdingclamps with bolts & nuts, f-bracket with bolts & nuts, top, dropper channel clamp with bolts & nuts for st pole, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, p.g clamps for weasel conductor, danger board with clamp & bolts, dead end clamp for pole/bracket with nuts & bolts, eye- hook, suspension clamp with nuts & bolts, j hook, all. binding wire 6 mm, 1x35 sq mm ac cable (xlpe), three phase distribution box, three phase distribution box clamp (ls), e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 120 mm2, all lugs 70 mm2, stay clamp with nut & bolts for st pole, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., st poles 11 mtr long, pcc poles 8.5 mtr long, all line materials with acsr weasel conductor, arial bunch cable 3x50+1x35+1x16 mm2, arial bunch cable 3x95+1x70+1x16 mm2, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of single support st/pcc pole for construction of 11 kv/lt line including digging of pit, fitting of all accessories, back filling of earth & others required work as per resspo norms., grouting of pole with 1:4:8 ratio of cement sand & brick ballast as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), grouting of stay sets including digging of pit with 1:4:8 ratio of cement sand & brick ballast as per resspo norms, fixing binding and nuzzling of stay wire. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), earthing of poles as per resspo norms, stringing & sagging of 3 phase 11 kv line upto proper sag including laying of acsr weasel conductor, binding with insulators & jumpering as per resspo norms, laying, streaching of arial bunch cable size 3x50+1x35+1x16 mm2/ 3x95+1x70+1x16 mm2 as per resspo norms, erection of sectional double pole structure of st pole for distribution t/f, including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm wi
Tender For : details supply of de-centralized materials & works for increasing capacity & installation of t/f under business plan 2025-26 edd-chunar - supply of following decentralized materials provide by contractor at the works site as per resspo norms., stone pad 300x300x75 mm, top, dropper, t-off channel clamp with bolts & nuts for pcc pole, e-bracket with nuts & bolts, copper l-piece 50x225x10 mm, copper l-piece 62x225x12 mm, all lugs 240 mm2, all lugs 70/95/120 mm2, stay clamp with nut & bolts for pcc pole, stay insulator, cartage of following materials from esc, mirzapur provided by department to work site including loading & unloading charge., pcc poles 8.5 mtr long, line materials with acsr weasel conductor, transformer 250 kva, transformer 100 kva, transformer 63 kva, transformer 25 kva, erection, erection of sectional double pcc pole structure for distribution t/f with the help of one pole already erected including digging of pit, fitting of all accessories, earthing of pole, back filling of earth, grouting of each pole & stay sets & other required works as per resspo norms. (cement sand & brick ballast wil be supplied by the constractor on his own his own cost), construction of transformer plinth for 250 kva transformer of 2x2x1.5 mtr. including the work of excavation for foundation of plinth plastering of walls and finishing including cost of all materials., well type earthing of 250 kva transformer by using b class g.i. pipe of 1.5 " dia and making hand pipe type earth boring iind strata of water or 60 ft. whichever is deeper about 6" of g.i. pipe shall remain above ground level 2 no. g.i. earth clamp shall also be welded to the portion of pipe which is above the ground level. through this g.i. clamp and g.i. strip 30x5mm duly galvanized shall be connected with nut & bolts. every dt shall have 2 such earthing, one earthing for t/f neutral and second earthing for t/f body. all requred materials shall by provided by the contractor., fencing of t/f with m.s. square mesh welded/fixed on m.s. angle of size 65x65x6 mm with gate hinges & shutter assembly, of over all size 3x3x2.5 mtr as per drawing including cost of all materials., mounting of 25 kva transformer as per resspo norms, mounting of 63 kva transformer as per resspo norms, mounting of 100 kva transformer as per resspo norms, mounting of 250 kva transformer as per resspo norms, cartage of received back 10 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 16 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 25 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 63 kva transformer from work site to esc, mirzapur including loading & unloading charge, cartage of received back 100 kva transformer from work site to esc, mirzapur including loading & unloading charge
Tender For supplying all materials, labour, tandp for power supply to rwss point including 3ph3w 11 kv line with 55mm2 aaac and installation of 1 no 25 kva 11/0.4 kv s/s transformer etc for rpws point to village singada under bhadrak block - 11 mtr long 330kg psc pole, 11 kv v cross arm, back clamp for v cross arm (11 kv), 11 kv "f" clamp, 11 kv pin insulator (polymer), 11 kv hw fitting (t & c ) 45 kn, 11kv disc insulator (t&c) 45 kn polymer, pressure channel 100*50*6mm ms channel each 2.8mtr long (9.2 kg per mtr) * 2 nos, ab switch & hg fuse, mounting channel 75*40*6 each 2.8mtr long 4 nos (6.8kg per mtr) with side angle, transformer belting angle 50*50*6mm 2.8mtr long 2 nos (4.5 kg per mtr) with side angle, fish plate 50x5 mm,2.36kg/mtr,each 0.280 mtr length, 6 nos required=(6x2.36x0.280), ab switch (11 kv ,200 a. 3 pole.50hz), hg fuse (11 kv .200 a. 3 pole.) pi, lightning arrester (9 kv,10ka) station class, earthing materials, ht stay set (complete), ht stay insulator, ht stay clamp, 7/10 swg stay wire, gi pipe earthing 40mm dia medium gage 3 mtr long, no 6/8 gi wire(dia4.6mm), 25x6mm gi flat for neutral earthing, 55 mm2 insulated conductor, 55 mm2 insulated conductor, pg clamp for 100mm2 aaa conductor, gi nut, bolt & washer of different size, earthing of support (coil type), danger plate, anti climbing device made of gi barbed wire, clamping arrangement etc. (2 kg per support), 25 kva, 11/0.4 kv (ai) bis energy level-ii, lt distribution box including kit kat fuse with mccb for 25 kva s/s, all cable socket 120 mm sq, materials cost for concreting of 11mtr psc pole (2.13mtr x 0.40mtr = 0.0.29 cum pcc 1:3:6), materials cost for concreting of stay (1.65mtr x 0.3mtr x 0.3mtr= 0.150 cum pcc 1:3:6), sub station fencing with metal spreading, erection charges for psc pole, erection charges for joist pole & dtr, erection charges of other items
Tender For supply of electrical item for nsc - supply item, supply of holdingclamp for sp-55 with n&b. (as per specification & drawing of upcl), supply of holdingclamp for pcc pole. (as per specification & drawing of upcl), supply of earth wire clamp for pcc pole with n&b. (as per specification & drawing of upcl), supply of stay clamp for sp-55 with n&b. (as per specification & drawing of upcl), supply of stay clamp for sp-33 with n&b. (as per specification & drawing of upcl), supply of suspension clamps with eye hook. (as per specification & drawing of upcl), supply of dead end clamps with i hook and n&b. (as per specification & drawing of upcl), supply of m.s clamp for dead end clamp with n&b. (as per specification & drawing of upcl), supply of stay clamp for pcc pole. (as per specification & drawing of upcl), supply of m.s clamp pcc with n&b for suspension clamp. (as per specification & drawing of upcl), supply of stay insulator 65x90 mm made of best quality pore line and without defeets isi standerd. (as per specification & drawing of upcl), supply of shear head type prc 25 to 25 sq mm. (as per specification & drawing of upcl), supply of lt bare n connector pg clamp 95-25 sq mm. (as per specification & drawing of upcl), supply of ipc for 120 sq mm to 120 sq mm. (as per specification & drawing of upcl), supply of bolt and nuts off size, supply of aluminium crimping type lugs 25 sq mm. (as per specification & drawing of upcl), supply of aluminium crimping type lugs 120 sq mm. (as per specification & drawing of upcl)
Tender For supply of electrical item for nsc - supply item, supply of holdingclamp for sp-55 with n&b. (as per specification & drawing of upcl), supply of holdingclamp for pcc pole. (as per specification & drawing of upcl), supply of earth wire clamp for pcc pole with n&b. (as per specification & drawing of upcl), supply of stay clamp for sp-55 with n&b. (as per specification & drawing of upcl), supply of stay clamp for sp-33 with n&b. (as per specification & drawing of upcl), supply of suspension clamps with eye hook. (as per specification & drawing of upcl), supply of dead end clamps with i hook and n&b. (as per specification & drawing of upcl), supply of m.s clamp for dead end clamp with n&b. (as per specification & drawing of upcl), supply of stay clamp for pcc pole. (as per specification & drawing of upcl), supply of m.s clamp pcc with n&b for suspension clamp. (as per specification & drawing of upcl), supply of stay insulator 65x90 mm made of best quality pore line and without defeets isi standerd. (as per specification & drawing of upcl), supply of shear head type prc 25 to 25 sq mm. (as per specification & drawing of upcl), supply of lt bare n connector pg clamp 95-25 sq mm. (as per specification & drawing of upcl), supply of ipc for 120 sq mm to 120 sq mm. (as per specification & drawing of upcl), supply of bolt and nuts off size, supply of aluminium crimping type lugs 25 sq mm. (as per specification & drawing of upcl), supply of aluminium crimping type lugs 120 sq mm. (as per specification & drawing of upcl)