Latest hollow pin Tenders | Government hollow pin Tenders

Central Government/Public Sector

CTN :45289245

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1. nr-094966 accnh/rcf 2. wc-081342 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/crws/26-27/cond. coach/10/0037. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45289246

02 Jun, 2026 NA

Multi City - Madhya Pradesh

Tender For auction sale of rolling stock - scrap old iron and steel of cond. coach with or without minor wood, decorum and non-ferrous attachment. (loose wood, decodum, non-ferrous & restricted items will not be delivered) coach no 1-nr-081086/ accnh /rcf 2-wc -081488 accnh/rcf note : 1.advance handing over of coaches for cutting may be allowed.2. before commencing of delivery of lot, all the restricted items shall be handed over to sse/yard and cutting shall be completed before commencing of delivery.(qty. 32 mt approx.) s.b. lot no. bpl/ crws/26-27/cond. coach/10/0038. restricted items: bogie items: complete trolley including following items:- wheel set with axle box & roller bearing, axle box spring & bolster spring, brake gear fittings, bronze wearing pieces, bolsters, suspension link, wearing plate, l.s. beam, equalizing stay with pin, draw bar hook, draft link with nut, draft key, screw couplings, buffer casing, buffer plunger with spindle in assembly, draw gear assembly, center pivot pin, etc. furnishing and carpentry items: window shutters, aluminum window frames with glass, sealed window glass, seats and berths of ac & non ac coaches, unified ss inlay, bio tank, ss trough floor, wash basin, aluminum water tank (over head, under slung etc), water taps ( metallic),wall protector etc. air brake items: distributor valves, control reservoir with common pipe brackets, air brake cylinder, dirt collector, check valve with chokes, angle cocks, isolating cocks, auxiliary reservoirs, pressure gauge, pev, peasd, guard emergency valve etc. electrical items: alternator, rru/erru, fan, battery cell, battery box, tube lighting fitting, night lamps, emergency lights, compressor, , condenser, evaporator unit, pre cooling transformer, transformer condenser/ blower motor, seat indication lights, wash basin lights, cable, laptop/mobile charging points, ac control panels, rmpu units, inverter etc.

Central Government/Public Sector

CTN :45066757

29 May, 2026 NA

Kapurthala - Punjab

Tender For supply of set of 8 rubber metal bonded items for air spring fiat bogies as per enclosed rcf/ kapurthala stock nomenclature list. [ warranty period: 30 months after the date of delivery ] - ball joint traction lever, ball joint roll link, traction center elastic joint, lateral bump stop, axle box pivot bush with solid or hollow pin construction, primary bump stop for fiat ir bogie, rubber pad for primary suspension for fiat ir bogie, rubber pad for longitudinal bump stop

Central Government/Public Sector

CTN :45241452

02 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply of pin for bolster spring suspension to icf drg no: t-0-5-637 alt. p/12. specn: t-0-5-637 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45110709

15 May, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector, motorman driver seat base with bend, hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,erclips,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger, safety strip, iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel), impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: a row bin 1 & 2

CTN :45083164

12 May, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot ferrous scrap - p.l no. 98050047.scrap c & w fittings consisting of bolster hanger ,anchor link, c buffer flange, control arm assembly, equalising stay, brake head, striker block, face plate, locking plate, spare parts of brake cylinder, crank shaft of main compressor, knuckle, cbc, cbc coupler, axle box , laminated pole shoe, housing, bcn door, tension rod assembly, rear cover, suspension tube, brake beam, dash pot, buffer ,oil thrower, top casting, brake cylinder(ferrous) ,bottom casting, lower spring beam, oxycut ferrous ball bearing, miscellaneousllaneous spares parts of valve & cock, draft pad, screw coupling, yoke , hand bar, pull road, cam shaft, axle cap, ferrous bearing of sorts and sizes, ferrous part of different type of valve, collar, ring, racer, socket head, jumper head, felt ring, ms cylinder, buffer casing, draw bar hook, hanger block, chain bolt, chute plate, wear plate, flap plate, draft gear, gear, pinion, impeller, schaku coupler parts, traction motor parts, nut bolts, pin, icf bogie component and miscellaneousllaneous ferrous etc. as available in lot, except any non ferrous.qty-145mt. location-east of vm road in ncb-12.

Central Government/Public Sector

CTN :45049646

07 May, 2026 NA

Mumbai - Maharashtra

Tender For supply of axle box pivot bush with solid or hollow pin construction for fiat bogie to drg. no. 1247488, alt. ar1 to be read with technical specification no. 17.359 100 03 with amendment no.1 of june 2019,17.617 100 02 and mdts-148 rev.01 & mdts-122 rev.03. note: traceability marking as per rcf letter no. md23311 dated 21/6/2022 [ warranty period: 48 months after the date of delivery ]

Central Government/Public Sector

CTN :45031656

15 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-82901, type-gs, railway-wcr, built year-1982. (2.) coach no.-890010, type-rh, railway-wcr, built year-1989. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a)list missing items- nill (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. note:-only rru 4.5kw=01 nos(03 kg) reclaimed in 890010/rh bogie is in excess.as per reclaim list. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by nos only. cutting allowed for easy loading. material lying in rajasthan state.

Central Government/Public Sector

CTN :45031657

15 May, 2026 NA

Kota - Rajasthan

Tender For auction sale of rolling stock - u/s and condemened overage coach (1.) coach no.-00102, type-wgaccn, railway-wcr, built year-2000. (2.) coach no.-98116, type-wgaccn, railway-wcr, built year-1998 with availbale ferrous-non ferrous excluding reclaim items. for stock holder sse/c&w/g/kota. hq breakup order no.01/2026 vide hq letter no-wcr/m/c/02/705 dt.06.03.2026. sr.dme l.no.-m.100/2 vol.-1 dt.13.03.2026. (a)list missing items- nill (b) per bogie reclaim items list:-a.bogie items:-1-complete trolly=02 nos. including following items. 1.1-wheel set with axle box, roller bearing and dynamo pulley=04 set+1, 1.2-axle box spring=16nos and bolster spring=08nos, 1.3-brake gear fittings=all items intact, 1.4-bronze wearing piece=04nos(not visible), 1.5-bolsters=02nos, 1.6-suspension link=16nos, 1.7-wearing plate=04nos(not visible), 1.8-l.s.beam(plank)=04nos, 1.9-equalising stay with pin=04nos. total reclaim weight-12.00mt. b.toilet fan-04+03=07nos and total weight-1.6+1.2=2.8 kg(in both bogie) as per reclaim list. coaches will be sold and handed over as is where is basis. purchaser has to arrange all safety equipment like fire extinguishers for ensuring safe working condition. at the time of delivery all items including zero value items such as like glass, pvc sheet, rubber, fiber, ply etc to be completely cleared from the location. purchaser should clear the site before final delivery. all reclaimed material must be return to be concern sse at his section in good condition. other than melting scrap if found during cutting & loading will be seperated & not delivered. purchasers are requested to see the lot/site and approchable road before bidding. bidders must submit the fixation of the delivery date through the ireps e-auction sale module at least 7 days prior to the delivery date. delivery will be given by nos only. cutting allowed for easy loading. material lying in rajasthan state.

Central Government / Public Sector

CTN :44977628

04 May, 2026 NA

Multi City - Odisha

Tender For auction sale of depot ferrous scrap - b-9/ apr-26/01: scrap bar and fittings (bar work fabrication in re-rollable condition) such as suspension hanger and pin, tension device with or without spring, different type of levers and plates, bolster pin, strap, spring, bolts and nuts, hanger stay etc. as available in the lot. bidders are requested to visit the material before bidding.

Hollow Pin Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors