Horizontal Silo Tenders

Get complete information related to latest Horizontal Silo Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Horizontal Silo Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Horizontal Silo Tenders .

Filter

Loading....

Get Tender in Email

CTN :45605186

02 Jul, 2026 2.75 Crore

Kondagaon - Chhattisgarh

Tender For supply of furniture and internal fitouts for permanent campus of jnv kondagaon (chhattisgarh) - discription of work, school building, (a) classroom, (i) classroom desk large sizesupply & installation big desk (for two persons)-the overall dimensions of desk will be 1066mm * 930mm * height 760mm, complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 900 mm x d 380 mm. edge towards bench shall be post formed with round edge. the remaining three edges must be sealed with 2mmthick pvc edge banding tape. edge band must be trimmed on edges and corners. the desk shall be have low chemical emission of vocs (voltage organic compounds) and carcinogens, contributing to a healthier room environment. seat and back rest shall be made of 18mm thick plywood of mr grade osl (one side shall be laminated, and other side shall have balancer finish) except back rest. back rest shall be have both sides colour lamination.technical details of seat and back rest are mentioned below:seating bench dimensions shall l 930 mm x w 300 mm. front side shall be rounded with post forming. remaining three edges shall sealed with 2mm thick pvc edge banding tape.back rest dimensions shall l 930 x h 200 mm upper side shall be rounded with post forming remaining three edges shall be sealed with 2mm thick pvc edge banding tape. desk shelve shall be made of prime quality 0.8mm thick crca sheet of h150mmxd300mm and side stiffeners of crca tube size 19mmx19mmx1mmthick. one vertical support (partition) of square tube size 25mm square x1.2mm thick must be provided at centre of tray . upper modesty made of prime quality 0.8mm thick crca sheet powder coated should be embossed with dimples in round shape, height will be 150mm, there should be perforated lower modesty made of prime quality 0.8 mm thick crca sheet of size h150mmxd21mm with square perforation, crca tube of size 19x19x1mm thick to be inserted for full length at bottom of jali . bag hook should be provide on both side of piller made of minimum 4mm dia rod side frame structure:- made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25mmx50mmx1.2mm thick crca tube , seat and back side frame structure made of prime quality crca pressed form section 165mmx25mmx1mm thick welded to 25.4mm diameter x 1.6mm thick erw-1pipe , there will be 8no. horizontal supports are 25mmx25mmx1.2mm thick crca pipes. .bottom rectangular tube 50x25x 1.2mm thick should be closed with ppcp cap bothside sand pipe dia. 25.4x1.6mm thick should be closed with metal (backside) and other side (undertheseat) ppcp cap, complete as per engineer incharge desk should be in semi knock down form with the help 16 connecting pipes ; 8 pipes on each side : connecting pipe size will be 20x20x1.2mm .all metal pieces shall be welded properly strongly and conformity with regulations with co2 welding shall be used , crca metal shall be coated after being treated with at least three stages and cleaned from oil , grease , dust and other dirt using special thermal control coating for metal furniture to form a layer of base coating of (iron phosphating) (0.4 0.8) gm/m , automatic spray coating shall be applied to be followed by a drying process in a thermal furnace with suitable temperature and time for the process , metal pipe & 7 tank treatment with minimum 45-50 micron powder coating., (ii) classroom desk medium sizesupply & installation medium desk (for two persons)-the overall dimensions of desk will be 900mm w 5 x 890mm d 5 x 688/420mm h 5 , complete as per specifications enclosed and direction of engineer-in- charge having the table top shall be made up of 18.0 mm thick plywood is 303 of mr grade osl (one side shall be laminated, and other side shall have balancer finish). table top dimensions shall be w 870 mm

Central Government/Public Sector

CTN :45550753

17 Jun, 2026 NA

Rajkot - Gujarat

Tender For supply of dining table with six seating capacity, heavy teck wood structure with six heavy duty chairs with cushion, handle supported. marble top or glass top 25mm thickness. product name: heavy-duty steel frame recreation chair with stretcher. 1. structural frame: the main structure must be constructed from heavy-duty crca (cold rolled close annealed) steel tubing (minimum 25mm diameter and 1.2mm wall thickness). the design must incorporate a steel stretcher (horizontal reinforcement bar) between the legs for enhanced structural stability and to prevent frame spreading under heavy loads. 2. support & armrests: integrated handle support (fixed armrests) made of steel or high-impact polymer, designed for ergonomic comfort and securely fastened to the main frame. 3. cushioning & upholstery: > * seat & back: must feature high-density, high-resilience molded pu foam (minimum density 32 kg/m? for back and 40 kg/m? for seat) to prevent sagging over time. tapestry: upholstered in premium-grade, breathable heavy-duty fabric or high-quality pvc leatherette with high abrasion resistance (martindale test > 30,000 rubs). 4. finish: all metal parts must be treated with an anti-corrosive, 7-tank phosphating process followed by an epoxy powder coating (minimum thickness 50?60 microns) for a scratch-resistant and rust-proof finish. highest; known for strict gauge standards.excellent; premium finish and aesthetics. best value for high-volume use.foam quality, molded pu (long life).,thick cushioning; soft feel. high-density resilient foam. weight capacity: if not specified in the description, add a clause: "the chair must safely support a static load of minimum 130 kg." would you like me to adjust the "estimated rate" for your requisition based on the current market price for these brands make: godrej, nilkamal or or similar [ warrantyperiod: 24 months after the date of delivery ] ]

State Government

CTN :45264382

30 May, 2026 68.00 Lacs

Bhopal - Madhya Pradesh

Tender For supply and installation of furniture for boys hostel - iii at nliu, bhopal - supply of furniture, providing steel almirah mirror having overall size 910w(+ 05mm) x 500d(+ 05mm) x 1980 (+ 05mm) h , top , bottom , side panel made up of 1mm thick crca sheet powder coated , legs or pedistal and shelves made up of 1.2mm thick crca sheet powder coated and height of thelegs or pedistal should be 130 mm(+ 05mm), shutter made up of 1mm thick crca sheet powder coated , no sharp edges of almirah ends, all shelve rack divided into equal parts , door die cast chrome plated handles fitted with washer & double nut , handles ring made of pvc cap , almirah all metallic panels screw with nut & bolt, metal pipe & 07 tank treatment with minimum 50 micron powder coating. shelving height-wise adjustable shelf mounting: uniformly distributed load capacity per each full shelf is 40 kg maximum. three horizontal shelf partitions are provided made of 1.2 mm crca steel top shelf clear space height from bottom is 1050 mm and second shelf height from bottom is 700 mm and third shelf height 350 mm; 1mm crca sheet fitted with heavy duty 25mm. hanging rod 02 nos. 25mm dia med guage ss capsule pipe is provided on the top in the centre. locking & handle - s.s. handle with 2 way locking mechanism with shooting rod/bolt arrangement. 5mm tk plain mirror (make-modi, asahi, saint gobain) of size 400 mm x 1200 mm is to be provided on one flap fixed with the help of m.s. clips/beading as per approval. whole steel structure is epoxy powder coated to the thickness of 50 microns in approved shade/color and texture. the work includes all required m.s. hinges, handle, lock, bolts and hardware of good and approved quality etc. compete. this job includes all installation, material & labor etc. complete and nothing will be paid extra for execution/installation of the item. items should have 5-year warranty., providing hostel bed overall size 1980w(+ 10mm) x 960d(+ 10mm) x 810h(+ 10mm), hostel bed made of prime quality round metal pipe of size 38mm dia 1.2mm & 50x25mm thick crca rectangular pipe 1.2mm thick, head rest designed with 38mm dia with 25mm round support pipes for supporting pillow having height of 810mm, bed mattress structure made from 50x25x 1.2 mm & 25x25x1.2 mm pipes, mattress support panel made of 12mm thick isi/bis grade bwp plywood, mattress panel height from floor should be of 450mm, four number of supports of size 25x25x1.2mm are given to mattress panel, additional 25x25x3mm angle used under ply along with headboard & footboard having length of 100 mm of each, the complete structure should be in knockdown construction and assembled with nut & bolts, all open edges of pipes should be covered by good quality ppcp shoes/caps, . all metal components should be pre-treated with zinc phosphating in minimum 07 tank process and then powder coated with epoxy polyester with approved shade, thickness of coating should be minimum 50 micron. .items should have 5 year warranty., providing study table overall size 900w(+ 05mm) x 600d (+ 05mm)x 750h(+ 05mm) , table top made up of 16mm thick bwp termite proof ply wood , 0.8mm mica on top and 0.6 mm balancing mica on bottom isi/bis standard as applicable for the product with 2mm thick pvc edge bending , understructure made of crca 40x40x1.2mm square metal pipe duly powder coated, understructure crca square metal pipe 40x40mm x 1.2mm thick made in knockdown condition, table provided with one side storage single drawers fixed pedestal with depth of 575mm(+/- 05mm) ,storage should be of size 300 mm (w) and 120 (h). the storage support ms pipe25x25x1.mm . storages made of 1.2mm thick crca metal sheet duly powder coated , all opend ends closed with ppcp caps & shoes, all metal parts shall be welded properly strongly and conformity with regulations, the table structure should be in knockdown condition, all metal components should be pre-treated with zinc phosphating in minimum 11 tank process

CTN :45179266

03 Jun, 2026 NA

Thane - Maharashtra

Tender For supply of acid tank for phosphating / degreasing / pickling plant as per sheet no. 1/1 of ofa drg. no. mcc/se/41

Loading, Please wait...

Horizontal Silo Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government