Latest horn valve Tenders | Government horn valve Tenders

State Government

CTN :45365364

04 Jun, 2026 1.69 Lacs

Panchkula - Haryana

Tender For providing and fixing of spare parts of sewer cleaning machine vehicle no. hr- 68-gv-8857 at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3:- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-in- charge 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns items:-providing and fixing of spare part of sewer cleaning machine including cost of 1 no. control valve, 1 mtr. chain 10mm, 2 nos. chain sprocket, 4 nos. 1.5 hose nipple, 1 no. shaft 6 hole including handling and fixing charges complete in all respect to the entire satisfaction of eic.

State Government

CTN :45363747

05 Jun, 2026 NA

Gondia - Maharashtra

Tender For call for all types of building materials - list, cement isi marks 53 gread (ultratech/acc/birlagold/ambuja), composite cement, steel isi mark (6 mm), steel isi mark (8 mm), steel isi mark (10 mm), steel isi mark (12 mm), steel isi mark (16 mm), steel isi mark (20 mm), centring wire & nail, metal rod (angle), profile sheet 3 x16, profile sheet 3 x12, profile sheet 3 x10, profile sheet 3 x 8, steel square pipe 1 x 2, steel square pipe 1.5 x 2, steel square pipe 2 x 2, steel square pipe 2 x 3, 8 mm metal crusher broken (pachgaon) with roylti, 10 mm metal crusher broken (pachgaon) with roylti, 20 mm metal crusher broken (pachgaon) with roylti, 20 mm metal hand broken (pachgaon) with roylti, 40 mm metal hand broken (pachgaon) with roylti, 40 mm metal crusher broken (pachgaon) with roylti, 80 /100 mm metal hand broken with roylti, sand transport with roylti & all taxes, murum transport with roylti & all taxes, transporting/ carting (murum /malma /mati / material), fly ash bricks is type std size, rcc np-2 second 150 mm pipe with collars, rcc np-2 second class 800 mm pipe with collars, rcc np-2 second 600 mm pipe with collars, rcc np-2 second 450 mm pipe with collars, rcc np-2 second 300 mm pipe with collars, cement seet 4 x 10, rcc tanks for shok pit (mgnrega/sbm) standard size, rcc tanks cap for shok pit (mgnrega/sbm) standard size, indian toilet seet with murga, camod toilet seet with murga, wash besin complete set, hex nut bolt, wooden doors, fyber doors, wooden windows, steel doors, windows and ventilors and grills etc, tiles ceramic, tiles glezz, tiles vetrified, wall tiles, putty per bag, paint primer per ltr, paint regular per ltr, oil paint steel work per ltr, oil paint wall & roof per ltr, washable oil-bound distemper, waret proof cement paint per bag, pevar block 60 mm, pevar block 80 mm, pevar block 100/120 mm, scafolding & shuttering (centering), brass nal (tap) per nos, gi nal (tap) per nos, pvc nal (tap) per nos, brass ferrule 1/2" inch isi mark, mta 1/2" inch isi mark, fta 1/2" inch isi mark, pvc pipe 1/2" inch isi mark, pvc pipe 25 mm dia. isi mark, pvc pipe 32 mm dia. isi mark, pvc pipe 40 mm dia. isi mark, pvc pipe 50 mm dia. isi mark, pvc pipe 60 mm dia. isi mark, pvc pipe 75 mm dia. isi mark, pvc pipe 90 mm dia. isi mark, pvc pipe 110 mm dia. isi mark, pvc pipe 140 mm dia. isi mark, pvc pipe bend, galvanized steel pipe 110 mm dia. isi mark, galvanized steel pipe 90 mm dia. isi mark, galvanized steel pipe 75 mm dia. isi mark, galvanized steel pipe 65 mm dia. isi mark, galvanized steel pipe 32 mm dia. isi mark, galvanized steel pipe 20 mm dia. isi mark, ci sluice valve 75 mm, ci sluice valve 80 mm, ci sluice valve 90 mm, ci sluice valve 110 mm, ci sluice valve 140 mm, non return valve 75 mm, non return valve 80 mm, non return valve 90 mm, non return valve 110 mm, non return valve 140 mm, air valve 75 mm, air valve 90 mm, air valve 110 mm, air valve 150 mm, galvanized steel pipe and fittings 1.50 inch, galvanized steel pipe and fittings 2.00 inch, water tank 500 ltr, water tank 1000 ltr, water tank 2000 ltr, water tank 5000 ltr, green net 90 %, batching and mixing palnt, mixture machine rent, rolar machine rent, jcp rent, vibrator, water tanker, kateri tar, chain link fencing, pvc door (36"x78"), acp door (25"x75"), borewell flashing, borewell drilling, borewell casing pipe iron, borewell casing pipe pvc/cpvc, pv panal 50w per nos, solar street light installation charge per light, solar on-grid plant 1 kw with all charges, led bulb 9 w, led bulb 12 w, led bulb 15 w, led bulb 20 w, led bulb 30 w

Central Government/Public Sector

CTN :45360404

29 Jun, 2026 NA

Mumbai - Maharashtra

Tender For 5/2 push pull spring return valve - 1/4"

Central Government/Public Sector

CTN :45372887

08 Jun, 2026 NA

Multi City - Multi State

Tender For supply of flash back arrestor(dry type) for regulator end of acetylene/lpg lines to prevent flash backs in oxy fuel system conforming to en 730/iso 5175-1/is 11006 standards with flame arrestor(fa) and non return valve(nrv) and thermal cut off valve(tv) working pressure: 1.5 bar for acetylene/5.0 bar for lpg. end connections g 3/8 lh to en 560/iso 3253 standards. make: messer(dgn fuel) or esab(protex ra) or gce(fr-34 r fuel) only. note:1) offers of oems or their authorised dealers enclosing valid authorised dealership certificate only will be considered. 2) the suppliers shall send test certificate from govt. authorised test house. in case of international brand, the test certificate from reputed institute like bam, germany is mandatory. 3) the suppliers should have equipments for testing of flash back arrestors and calibration. the purchaser has the right to inspect these installations. as per specn. en 730/iso 5175-1/is 11006 . [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45371798

20 Jun, 2026 48.00 Lacs

Hyderabad-T - Telangana

Tender For repair and rectification of day to day complaints of external water supply distribution system comprising ci, di, gi, ppr and cpvc pipeline networks, sluice valves, non-return valves, air valves, valve pit chambers, supports along with all connected

Central Government/Public Sector

CTN :45371799

20 Jun, 2026 48.00 Lacs

Hyderabad-T - Telangana

Tender For repair and rectification of day to day complaints of external water supply distribution system comprising ci, di, gi, ppr and cpvc pipeline networks, sluice valves, non-return valves, air valves, valve pit chambers, supports along with all connected

Central Government / Public Sector

CTN :45372234

26 Jun, 2026 NA

Multi City - Multi State

Tender For supply of heavy bronze non return valve 25mm (horizontal check valve) pn-16,screwed in bonnet, screwed bsp parallel thread size 25 mm & length should be 7.5 cms. as per the drawing & specifications attached. make zoloto or similar.firms should submit sample to the consignee if required for checking feel, finish, general characteristics and practical fitment and usage. offers will be accepted subject to sample being found suitable if any.]

corporations/Associations/Others

CTN :45374899

09 Jun, 2026 2.53 Lacs

Kolkata - West Bengal

Tender For installation of 150 mm dia non-return valve for 150 mm dia delivery pipe line of submersible pump motor no-3,4,5 for manifold-3 and pump motor no-c for manifold-2 at c n roy road hw and cbps

corporations/Associations/Others

CTN :45370709

13 Jun, 2026 NA

Multi City - Multi State

Tender For supply of 01021801 o rings lop model pdfu-60.4n,01021801 compensation bush,01021801 oil seal pump model pdfu-60.4n,01021801 rotor bush,01021801 cartridge asemb mill lop,01021801 grease retainer ring,01021801 mill lop model pdfu-60.4n,01021801 return valve assembly,01021801 support plate mill lop

State Government

CTN :45367030

20 Jun, 2026 NA

Chandigarh - Chandigarh

Tender For supply of glass reinforced concrete grc screens of 8 feet x 4 feet , stainless steel grade 304 main drain cover of size 2 feet 3 inch x 1 feet 11 inch , double action hydraulic floor spring make sandhu or equivallent , expendable fastner 6 inch , floor nozzle with necesary stainless steel screws 63mm , floor nozzle with necesary stainless steel screws 40mm , motar starter star delta starter 10hp motor , mortor starter dol starter 1 point 5 to 3hp motor , activated media sand , ball valves isi controllong the pressure of the flow double union 63 mm , non return valve isi of 150 mm diameter ci , aluminium wire

Horn Valve Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors