Tender For mp-lads-angamaly bp-mp lads 2024-25 honble mp sr. p.p.suneer ( rajyasabha) construction of open gym and installation of equipment at chakkala pongam area of ward -13, thuravoor grama panchayat (infrastructure & purchasc) ernakulam district-general civil work - platform for open gym, 2.32:clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared., 2.8.1:earth work in excavation by mechanical means (hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.all kinds of soil, 4.1.8:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:4:8 (1 cement : 4 coarse sand (zone-iii) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources), 4.3.1:centering and shuttering including strutting, propping etc. and removal of form work for:foundations, footings, bases for columns, 4.1.3:providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-iii)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources), od228316/2023-2024:construction of granular sub-base by providing local material, spreading in uniform layers on prepared surface and compacting by ramming to achieve the desired density complete i) using gravel mix/quarry muck, od223449/2023-2024:providing and laying factory made chamfered edge cement concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength,thickness & size/ shape, made by table vibratory method using pu mould, laid in required colour & pattern over 50mm thick compacted bed of stone aggregate, compacting and proper embedding/laying of inter locking paver blocks into the stone aggregate bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of engineer-in-charge.60mm thick cement concrete paver block of m-35 grade with approved colour, design & pattern. modified spec. 16.91.1, od134330/2025-2026:providing and fixing gi pipe hand rail of approved size by welding and all labour charges etc., 5.23:smooth finishing of the exposed surface of rcc work with 6mm thick cement mortar 1:3 ( cement : 3 fine sand)., 13.52.2:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on concrete work, 13.52.1:finishing with epoxy paint (two or more coats) at all locations prepared and applied as per manufacturers specifications including appropriate priming coat, preparation of surface, etc. complete.on steel work, od133367/2025-2026:supplying and fixing white stone bench with back rest,2 seater, od139386/2025-2026:providing and laying of interlocking concrete block pavements using80 mm m 40 interlocking paver blocks made by strong vibratory compaction of approvedsize,design @ shape ,laid in required pattern over and including a compacted bed of 6 mm stoneaggregate of 50 mm average thickness etc all complete as per the direction of engineer incharge., od234555/2023-2024:supplying and fixing in place granite name board of slab area less than 0.9sqm includingengraving and painting letters etc complete as per direction of engineer in charge at sitedar spec
Tender For shifting of existing s&t gears such as buried cables, ofc, location boxes, and lc gate equipment for removal of infringements and dismantle with clearing site to facilitate earthwork and bridge work in connection with quadruoling project between vadodara to godhra work and "design, supply, installation, alteration, testing and commissioning of hot standby electronic interlocking (hitachi make) system and outdoor signaling systems in connection with track circuiting work at sevaliya station for wtps siding under dy. cste construction, vadodara, gujarat (western railway).
Tender For corrigendum : environmental measures. hiring of mechanical equipment for attending miscellaneous works of operational areas in visakhapatnam port for a period of 3 years i.e. 2026 to 2029. - supply hydraulic excavator (3d) with tyre mounted with driver and fuel for clearing the unwanted materials minimum 8hrs per day from the drainages (destination/roads of vpa) as required and as directed by the engineer-in-charge,complete all hire and operational charges.all labour and materials., supply of tractor with trolley in good running condition of make tata/ashok leyland/mahindra or equivalent having a carrying capacity of 3.00 m3 with hydraulically operated body for attending miscellaneous works in port operational areas and other areas as required and as directed by the engineer-in-charge .the cost inclusive of all hire and operational charges etc.., complete.all labour and materials., hiring of suv(non a/c) tata sumo/bolero/ tavera of equivalent of higher version of model 2019 of later including drivers salaries and maintenance charges,hire and operational charges as required and as directed by the engineer-in-charge, complete with 1800km mileage per month., supply of mini excavator in good running condition of make tata/hitachi/z-axis 20 u or equivalent to work in port operational areas and other areas in port area for desiltation of all types of drains and other miscellaneous etc.., as required and as directed by the engineer-in-charge.the cost inclusive of all hire and operational charges etc..,complete., supplying of man power associate with the vans and equipments in port operational areas with necessary tools and plants etc.., as required and as directed by the engineer-in-charge,complete.all labour and materials.
Tender For clearing of dismantled terminal equipment and materials from 220kv kathalguri switchyard at agbps, neepco, bokuloni, dibrugarh and their systematic transportation to 220kv tinsukia gss, aegcl store along with proper staging
Tender For clearing of dismantled terminal equipment and materials from 220kv kathalguri switchyard at agbps, neepco, bokuloni, dibrugarh and their systematic transportation to 220kv tinsukia gss, aegcl store along with proper staging
Tender For providing of m & r of 2x110 mw and 2x210 mw ash dykes at ptpp, parichha. - carriage of cmr/ash by mechanical transport including loading, unloading and stacking upto 5 km distance from power house area to ash ponds at ptpp parichha. payment to be made after deducting voids as per cpwd specfication or as decided by engineer in charge. , earth/ash work in excavation in earth over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead upto 50m and lift upto 1.5m; disposed earth to be levelled and neatly dressed , placing of precast rcc planks in decantation well including its carrige and putting it into slott including all labour t&p etc. required for proper completion of work. , providing and laying empty cement plastic bags filling the same with ash having capacity of 50kg and stiching the same with sutali, laying with ash pond area as per instruction of engineer incharge. , engaging jcb/hydra machine on hire bases including hire fuel driver helper etc. complete. , dry stone pitching 22.5/30 cm thick including supply of stones and preparing surface filling from fly ash with watering & compection complete including carriage from coal handling area.(boulder free of cost from chd area in plant) , spreading of cmr/ash/earth by opening of stack including dressing watering compaction/ramming etc. complete for proper completion of work as per direction of engineer in charge of the work. payment to be made on compacted quantity. , clearing jungle including uprooting of rank vegetation, grass, brush wood,trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared , brick work with fly ash bricks f.p.s. (non modular) bricks of class designation 7.5 in foundation and plinth in: cement mortar 1:6 (1 cement : 6 coarse sand) , cement plaster (in fine sand) 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) , providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work up to plinth level : 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , formation of dyke/ roads using approved materials including the preparation of borrow area,stripping, watering of borrow area, excavation of approved quality of material from borrow area,using poclains or any other mechanical means,loading, unloading, transporting by dumpers,trucks etc., surface watering / dewatering,lowering of water level to at least 0.5 m belowthe bottom of the working level, includingconstruction of cofferdams wherever required,depositing the fill material on the dyke,spreading by dozers or grader in layers notexceeding 30 cm in compacted thickness forforming the embankment with all leads, lifts,breaking clods, watering, compaction with min. 10tone capacity vibratory rollers or pneumatictyred rollers to achieve a dry density not lessthan 95% of maximum dry density (standardproctor) forming extra width on edges, trimmingof slopes and slope compaction with dozers orslope compactors to obtain the section as perconstruction drawings, with all incidental charges, cost of labour, equipment, materialsetc. complete as per specifications, drawings and as directed by the engineer. with ash available from inside ash dyke area , structural steel work in single section, fixed with or without connecting plate,including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. , same as above item but steel shall be issued by department free of cost ( steel issued by department) , steel reinforcement for r.c.c. work including straightening, cutting, bendin g, placing in position and binding all complete for thermo-mechanically treated bars
Tender For providing of hiring of custom house agent - lumpsum based - import, export; clearing agents for clearing import/re-export shipment of instem; electronic devices, chemicals, medical/biomedical equipment
Tender For bid to ras providing of hiring of custom house agent - lumpsum based - import, export; clearing agents for clearing import/re-export shipment of instem; electronic devices, chemicals, medical/biomedical equipment
Tender For providing of custom bid for services - repair and maintenance of all hm equipment during lean season and trash cleaning from intake, clearing of silt from drains of silt excluder gate operation chamber and preventive maintenance of all hm equipment during peak se..