Latest hose collar Tenders | Government hose collar Tenders

State Government

CTN :45604216

24 Jun, 2026 2.15 Lacs

Kinnaur - Himachal Pradesh

Tender For providing and laying of additonal precast concrete socketed and spigotted pipes and collar of class np-2 with reinforcement duly isi marked as per isi-458-2003 precast concrete pipe with and without reinforcement for providing temporary approach to v

corporations/Associations/Others

CTN :45612213

25 Jun, 2026 NA

Godda - Jharkhand

Tender For purchase of following materials related to chapakal/solar water tower/urban water supply pipe line repair and street light repair installed-di split collar isi mark ,di jointer isi mark nut (7suta) , bolt(suta) , coupling bolt (4 sutta) , esr nut bolt (5 suta ,4inch long) , chain kuppi isi mark , grinder machine good quality , tool set , water testing lab equipments , alum , bleaching powder , lime , grease oil , hydraulic oil , engine oil , breaker (16 kg) , generator (10kva) , pipe wrench (24 n0) , pipe wrench (18 n0) , pipe wrench (14no) , 18/19 ring wrench , 16/17 ring wrench , 16/17 dial wrench , pipe lifter(1.25inch) , rod die , blade (aary patti) , 30/32 ring wrench , 30/32 dal wrench , 36 n0 ring wrench , 36no. dal wrench , plash , 20 no ring wrench , aary frame , electrode rod , pecking all dia(100mm to 600mm) , hrc fuse-100a , kit kat fuse-100a , 250 watt ballast, copper winded, make-cropmpton, phillips etc. , 400 watt ballast, copper winded, make-cropmpton, phillips etc. , 250 watt mh lamp, make-cropmpton, phillips etc. , 400 watt mh lamp, make-cropmpton, phillips etc. , ignitor, make-crompton, bajaj etc. , 33mfd capcitor , 42 mfd capcitor , gi d-clamp (size: l-13', b-2') set with 3 nut bolt (m6x16) for street light, 2mm thickness, d-clamp to fix in pole and round clamp to fix light with pipe. , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-1.5 inch, pipe thichness-1.5mm , gi bend pipe for light fixing, total length-18inch, straight portion-10 inch, dia-2 inch, pipe thichness-1.5mm , meggar, make-fluke,waco etc. , multimeter, make-fluke etc. , tester, make-fluke etc. , 3p, 16-32a, power contactor, make-l&t, abb, siemens, , extension board with 5mtr cable , combination plier, make- taparia etc. , nose plier, make- taparia etc. , wire stipper, make- taparia etc. , screw driver set, make- taparia etc. , hammer(bal pin), 500 g, make-taparia etc. , drill machine ,800-1200 watt, make-bosch,dewalt etc. , analog timer for high mast , gi wire for binding purpose(18 gauge ) , ldr(light dependent resistor) sensor for high mast , soldering iron, power-65 watt with complete set , d-spanner set upton-32mm , ring-spanner set upton-32mm , allen key set , pvc tape , bamboo ladder , industrial socket , industrial plug top , old tyep vintage bakelite switch for street light , insulation piercing connector upton-50mmsq. , surface mounted led pcb plate for 35 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 45 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 50 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 70 watt street light,make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 110 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 120 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 190 watt street light, make-crompton, havells, orient, bajaj etc. , surface mounted led pcb plate for 200 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 35 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 45 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 50 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 70 watt street light, make-crompton, havells, orient, bajaj etc. , driver for 110 watt street light,make-crompton, havells, orient, bajaj etc. , driver for 120 watt street light,make-crompton, havells, orient, bajaj etc. , 3-phase motor starter upto-20 kilowatt motor , 1-phase motor starter upto-5hp motor , electric air blower with dust extraction, 800-1000 watt, make-bosch, buildskill etc. , electrical adjustable pole climbing shoe

State Government

CTN :45598673

24 Jun, 2026 NA

Umrer - Maharashtra

Tender For annual material supply for verioun scheame constructions at. gp. pendharabodi - construction materials, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement 53 grade isi mark, road rollar rent, water tankar, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks (red), bricks (cement), mixer machine, tiles ceramic, tiles vitrified, tiles polished chequered, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm, islb angle, iron angle, iron window grill, plastic water tank (1000 lit.), plastic water tank (500 lit.), distemper, jcb, damber/ tar oil, alluminium sliding window, cement pipe 150 mm with collar, cement pipe 250 mm with collar, cement pipe 300 mm with collar, cement pipe 450 mm with collar, cement pipe 600 mm with collar, cement pipe 800 mm with collar, cement pipe 900 mm with collar, khadanga, centring plate rent, information board (0.90x0.60)cm, kota stone, vibrating machine, ms grill, snowsem, cement waterproof paint, oil paint, tarpipne, wc pan (toilet seat), pvc pipe 1/2 inch, pvc pipe 3/4 inch, pvc pipe 1 inch, pvc tee / elbo, paiwar block, rubble, toilet combod sit

State Government

CTN :45598676

24 Jun, 2026 NA

Umrer - Maharashtra

Tender For annual materials supply for verious scheame construtions at.gp. shivapur - construction materials, metal 80 mm, metal 40 mm, metal 20 mm, metal 12 mm, barbed wire / fenshing wire, sand, murum, cement 53 grade isi mark, road rollar rent, water tankar, sittl 6mm, still 8 mm, still 10 mm, still 12 mm, still 16 mm, still 20 mm, centring tar, bricks (red), bricks (cement), mixer machine, tiles ceramic, tiles vitrified, tiles polished chequered, iron door with frame & palla, cement door palla, cement door frame, iron sheet of 0.50 mm, islb angle, iron angle, iron window grill, plastic water tank (1000 lit.), plastic water tank (500 lit.), distemper, jcb, damber/ tar oil, alluminium sliding window, cement pipe 150 mm with collar, cement pipe 250 mm with collar, cement pipe 300 mm with collar, cement pipe 450 mm with collar, cement pipe 600 mm with collar, cement pipe 800 mm with collar, cement pipe 900 mm with collar, khadanga, centring plate rent, information board (0.90x0.60)cm, kota stone, vibrating machine, ms grill, snowsem, cement waterproof paint, oil paint, tarpipne, wc pan (toilet seat), pvc pipe 1/2 inch, pvc pipe 3/4 inch, pvc pipe 1 inch, pvc tee / elbo, paiwar block, rubble, toilet combod sit

State Government

CTN :45605950

02 Jul, 2026 4.90 Lacs

Kota - Rajasthan

Tender For supply of cid joints for hdpe pipe. (long collar) for divison store at phed division sangod

State Government

CTN :45605959

02 Jul, 2026 4.90 Lacs

Kota - Rajasthan

Tender For supply of cid joints for hdpe pipe. (long collar) for divison store at phed division ramganjmandi

State Government

CTN :45605961

02 Jul, 2026 4.90 Lacs

Kota - Rajasthan

Tender For supply of cid joints for hdpe pipe. (long collar) for divison store at phed district division kota for divison store at phed district division kota

State Government

CTN :45397974

24 Jun, 2026 80.77 Lacs

Kota - Rajasthan

Tender For corrigendum : work of name :- remaining work pkg. no. rj-23-10/srf (rr) / np / 2022-23 distt kota - providing, laying and spreading and compacting specified graded crushed stone in sub-base course including premixing the material at omc in mechanical mixer (pug mill), carriage of mixed material, laying in uniform layers with motor grader, f.e. loader, on a prepared surface and compacting with vibratory compactor to achieve the desired density including all material, labour, machinery, lighting barricading and maintenance of driversion complete. (morth specification clause 401). with all lead & lift, fdkuiqjk rfd;k ls punzsly, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc ordinary kilometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, kilometre stone reinforced cement concrete m15grade kilometre stone of standard design as per irc:8-1980, fixing in position including painting and printing etc hectometer stone (precast), fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and erecting typical citizens information board as per approved drawing & specification of mord, made of two ms sheet of 1.6 mm thick each of size 900 mm 750 mm stiffened by angle iron 25 mm 25 mm 3 mm all around the plate and plates fixed on frame of 75 mm dia pipe of 12 swg sheet (vertical post 3050 m with angle holdfasts and horizontal member 900 mm) to be joined by 5 mm thick ms plate at 12 places (65 50 mm) duly embedded in cement concrete m-15 grade of block of 600 mm 600 mm 750 mm size below ground level as per enclosed drawings & as directed by engineering - in-charge. all ms will be stove enameled on both side, lettering, figuring and border will be with ready mixed synthetic enamel paint of superior quality in required shade and colour etc. complete in all respect. all sections of framed post and steel tube will be painted with primer and two coat of epoxy paint as per drawing and as per mord specification., fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, providing and laying reinforced cement concrete pipes np-3 for culverts including jointing ends and fixing collar with cement mortar 1:2. (morth specification : clause 1000/2900). 300 mm dia, fdkuiqjk rfd;k ls punzsly, e.mkuk ls guksfr;k, total, dry lean cement concrete sub - base. construction of dry lean cement concrete 1:3:6 sub-base over a prepared sub-grade with coarse and fine aggregate conforming to is: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blening to be as per table 600-1, cement content not to be less than 200 kg/cum, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonne vibratory roller, finishing and curing., fdkuiqjk rfd;k ls punzsly, total, providing and laying un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub-base with 43 grade cement, coarse and fine aggregate conforming to is:383, maximum size of coarse aggregate not exceeding 25mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or fix form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures and vacuum processing pump as approved, curing compound, finishing to lines and grades as per drawing as per morth specification : clause no. 602, 112. using cement concrete m-30 pavement grade, fdkuiqjk rfd;k ls punzsly, total, earthwork in excavation for foundation of structure complete with all l

State Government

CTN :45589456

25 Jun, 2026 NA

Giridh - Jharkhand

Tender For quotation rate of materials - granular material or hard murrum for gsb works at quarry, aluminium alloy/galvanized steel, rcc pipe np 4 heavy duty non pressure pipe 1000 mm dia, rcc pipe np 4 heavy duty non pressure pipe 1200 mm dia, steel pipe 50mm external dia as per is:1239, coller for joints 300mm dia, rcc pipe np 4 heavy duty non pressure pipe 300 mm dia, steel helmet and cushion block on top of pile head during driving, steel pipe 25mm external dia as per is:1239, "np2 r.c.c hume pipe with collar as per i.s. 458-1971(i) 100 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ii) 150 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iii) 200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(iv) 250 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(v) 300 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vi) 450 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(vii) 600 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(viii) 700 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(ix) 800 nn dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(x) 900 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xi) 1000 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1200 mm dia", "np2 r.c.c hume pipe with collar as per i.s. 458-1971(xii) 1400 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(i) 300 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(ii) 450 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iii) 600 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(iv) 700 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(v) 800 mm dia and 900 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vi) 1000 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(vii) 1200 mm dia", "np3 r.c.c. hume pipe (as per i.s 458-1971)(viii) 1400 mm dia", jute rope 12 mm dia, aggregate size-45 mm to 2.36 mm, aggregate size-45 mm to 22.4 mm, aggregate size-2.36 mm to 0.075mm, aggregate size 22.4mm to 5.6 mm, aggregate size 63 mm to 45 mm, aggregate size below 5.0 mm, bamboo (1st class) 85 mm-100mm dia 2.0 m long, bamboo (1st class) 85 mm-100mm dia 2.5 m long, bamboo (1st class) 85 mm-100mm dia 3.0 m long, bamboo (1st class) 85 mm-100mm dia 4.5m-5.5m long, bamboo (2nd class) 75 mm dia, 1.8 m-2.5 long, bamboo (2nd class) 75 mm dia, 2.1 m-3.0 m long, bituminous sealant, blasting material, bond stone (400mm x 150mm x 150mm), corbelling stones (300mm x 150mmx 150mm), corrosion resistant structural steel grating, crow bras 40 mm dia (hire charges), crushed sand or grit passing 2.36 mm and retained on 180 micron, crushed slag, crushed stone aggregate 26.5mm to 75 micron, crushed stone chipping 6.7mm size 100% passing 11.2 mm and retained on 2.36 mm, crushed stone chipping 9.5 mm nominal size, debonding strips (3.75m x 10mm x 5mm cut-out of rubber filler board or similar material including 5% wastage), edge stone (450mm x 350mm x 100mm), edge stone (450mm x 350mm x 200mm), epoxy paint, epoxy primer, gi pipe 100mm dia (tata or equivalent make), gi wires (4mm dia), granular material (natural occurring soil gravel mixture/quarry waste, kankar, laterite, dhandla, hand broken metal 40mm size, interlocking blocks with 60 mm thickness, interlocking blocks with 80 mm thickness, key aggregates passing 22.4 mm and retained on 2.8mm, lime putty, local wood piles (1st class)150-200mm dia, 6m long, local wood piles (1st class) 100mm x 75mm, loose stone, ms sheet tube (47 mmx47mmx12 swg sheet), ms sheet 1.5mm thick, ms sheet 2mm thick, polythene sheeting (0.2mm to 0.5mm thick), (covering 2/3 rd dowel bars (20x23) and tight fit including 5% wastage), rcc pipe np3 (750mm dia), rcc pipe np3 (500mm dia), rcc pipe np4 (750mm dia), rcc pipe np4 (600mm dia), rcc pipe np4 (500mm dia), benzene, stone for stone set pavement (300mm x 200mm x 150mm), well graded granular base material-grading a 26.5mm to 4.75mm, well graded granular base

corporations/Associations/Others

CTN :45261923

25 Jun, 2026 2.25 Lacs

Anpara - Uttar Pradesh

Tender For corrigendum : tender for supply of supply of - gaiter for feeder outlet gate actuator shaft along with end clamps, gaiter for ball charging gate actuator shaft along with end clamps, gaiter for pc pipe purge air damper along with end clamps, gaiter for oil gun ignitor along with collar along with end clamps, fibre collar for sadc actuator (outer) - different types of spares for feeder

Hose Collar Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors