Get complete information related to latest Hose Nipple Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hose Nipple Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hose Nipple Tenders.
Tender For providing and fixing of spare parts of sewer cleaning machine vehicle no. hr- 68-gv-8857 at water works in i/a ph-i, panchkula. (a/mtc. of p.h services in sector-1 to 21 and i/a ph-i and ii, panchkula) - 24.5.1.6:- miscellaneous items 1.6. supply and jointing three core submersible flat cables of approved make with bare bunched copper conductor insulated and sheathed with pvc for submersible pump motors /fountain lights etc with voltage grade 1100 volts marked with is:694, 1990 including cost of jointing, materials as well as carriage, loading, unloading etc. complete in all respect up to the entire satisfaction of engineer- in-charge. submersible copper cable 3 core 16 sqmm [through rate], 23.22.8.3:- mccb ,distribution boards, mcb`s, rccb`s, change over etc. 8.3. sitc four pole on load manual change over switch in ss enclosure of following ratings 200 amp 415 volts [through rate], 20.10.3:- extra for fixing sluice valves/flap valves socketed or flanged including cartage from stores or nearest railway station to site of works 3. 150 mm i/d [through rate], 20.11.3:- providing and fixing cast iron double flanged swing check type reflux (non return) valves pn-1.6 marked with is:5312 including nuts and bolts marked with is:1363, rubber sheet marked with is:638 etc., carriage loading, unloading, stacking, handling, re-handling etc. complete in all respect to the satisfaction of engineer-in- charge 3. 150 mm i/d [through rate], pm017. hire and running charges of crane 20 tonne capacity [rate], el270. m.s. pipe 100mm dia, [rate], ns items:-providing and fixing of spare part of sewer cleaning machine including cost of 1 no. control valve, 1 mtr. chain 10mm, 2 nos. chain sprocket, 4 nos. 1.5 hosenipple, 1 no. shaft 6 hole including handling and fixing charges complete in all respect to the entire satisfaction of eic.
Tender For corrigendum : supply of item no - 1 - part no - ss-10m0-6 stainless steel swagelok tube fitting union, 10mm tube od , item no - 2 - part no - ss-6m0-6 stainless steel swagelok tube fitting union 6mm tube od , item no - 3 - part no - ss-6m0-c 316 stainless steel cap for 6mm od tubing , item no - 4 - part no - ss- 10m0-c 316 stainless steel cap for 10mm od tubing , item no - 5 - part no - ss-6m0-p 316 stainless steel plug for 6mm swagelok tubing fitting. , item no - 6 - part no - ss-10m0-p 316 stainless steel plug for 10mm swagelok tube fitting , item no - 7 - part no - ss-6m0-6bt ss union bored through 6mm od , item no - 8 - part no - ss-10m0-6bt stainless steel swagelok tube fitting union 10mm tube od bored through. , item no - 9 - part no - mh-htb-6m hand tube bender , 6mm tube od 15mm bend radius , item no - 10 - part no - ms-htb-10m hand tube bender, 10mm tube od 24mm bend radius , item no - 11 -part no -ms-tc-308 tube cutter for stainless steel, soft copper, and aluminium tubing from 3 by 16 inch to 1 inch od and 6 to 25mm outside diameter, from 3 by 16 inch to 1 inch od , item no - 12 - part no - ms-tcw-308 tube cutter replacement cutting wheel , item no - 13 - part no - ms-tf-16-cs-06mm tf 16 series tube facing tool collet set - 6mm od , item no - 14 - part no - ms-tf 16-cs-10mm tf 16 series tube facing tool collet set - 10mm od , item no - 15 - part no - ms-tf-16-21-e tf16 series tube facing tool for sizes 1 by 8 inch to 1 inch - 3mm to 25mm - size with india power cord 230v 50 by 60hz and users manual , item no - 16 - part no - ms-tdt-24 tube deburring tool, 3 by 16 inch to 1.1 by 2 inch and 4 to 38mm od ) /bid number : gem/2026/b/7506821 * /dated: 20-05-2026 & & / bid document 1 / 19
Tender For corrigendum : supply of gi cu mlc fittings - copper pipe 12mm , appliance valve half inch , isolation valve half inch , rubber hose eight mm png , gi elbow half inch , adapter three fourth in f to half in npt m brass , brass union connector three fourthinch to 12 mm f , brass adapter half inch x 12 mm , copper socket 12mm , hex nipple gi size half in x 2 in long , hex nipple gi half inch x 3 inch , nipple gi half in x 4 in len , gi male female elbow half inch , gi plug half inch , gi coupling or socket half inch , half inch gi tee , gi union half inch , tape teflon , clamp hose half inch , u clamp gi half in , u clamp gi three fourth inch , mlc pipe od 16mm , female union brass 16mm x three fourth inch , male union brass 16 mm x half inch , mlc fitting composite pvc clamps , elbow 90 deg brass 16 mm x 16 mm
Tender For tender for supply of plumbing items/ material at rdvv, jabalpur - supply of plumbing items, cpvc pipe inch, cpvc pipe inch, cpvc pipe 1 inch, cpcv pipe 1.1/4 inch, cpvc pipe 1.1/2 , cpvc pipe 2 inch, cpvc pipe 3 inch, upvc pipe inch, upvc pipe inch, upvc pipe 1 inch, upcv pipe 1.1/4 inch, upvc pipe 1.1/2 , upvc pipe 2 inch, upvc pipe 3 inch, pvc pipe 2 inch, pvc pipe 3 inch, pvc pipe 4" inch, g.i. pipe inch, g. i. pipe 1 inch, g. i. pipe 2 inch, g. i. pipe 3 inch, g. i. pipe 4" inch, cpvc reducer socket inch, cpvc reducer socket inch, cpvc reducer scket 1 inch, cpcv reducer socket 1.1/4 inch, cpvc reducer socket 1.1/2 , cpvc reducer socket 2 inch, cpvc reducer socket 3 inch, upvc reducer socket inch, upvc reducer scket 1 inch, g. i. reducer socket inch, g. i. reducer scket 1 inch, cpvc reducer tee inch, cpvc reducer tee inch, cpvc reducer tee 1 inch, upvc reducer tee inch, upvc reducer tee inch, upvc reducer tee 1 inch, g. i. elbow reducer inch, g. i. elbow reducer 1 inch, g. i. elbow reducer 1.1/4 inch, g. i. elbow reducer 1.1/2 , cpvc tee inch, cpvc tee inch, cpvc tee 1 inch, cpvc tee 1.1/4 inch, cpvc tee 1.1/2 , upvc tee inch, pvc tee 1.1/4 inch, pvc tee 1.1/2 , pvc tee 2 inch, pvc tee 3 inch, g. i. tee inch, pvc tee inch, g. i. tee 1 inch, g. i. tee 1.1/2 , cpvc socket inch, cpvc socket inch, cpvc socket 1 inch, upvc socket inch, upvc socket inch, upvc socket 1 inch, g. i. socket inch, g. i. socket inch, g. i. socket 1 inch, g. i. socket 1.1/4 inch, g. i. socket 1.1/2 , g. i. socket 2 inch, g. i. socket 3 inch, cpvc elbow inch, cpvc elbow inch, cpvc elbow 1 inch, upvc elbow inch, upvc elbow inch, upvc elbow 1 inch, g. i. elbow inch, g. i. elbow inch, g. i. elbow 1 inch, cpvc union inch, cpvc union inch, cpvc union 1 inch, upvc union inch, upvc union inch, upvc union 1 inch, g. i. union inch, g. i. union inch, g. i. union 1 inch, g. i. union 1.1/4 inch, g. i. union 1.1/2 , g. i. union 2 inch, g. i. union 3 inch, g. i. flunch 1 inch, g. i. flunch 1.1/2 , g. i. flunch 2 inch, g. i. flunch 3 inch, nut bolt (nks lwr) 2", nut bolt (nks lwr) 3", nut bolt (nks lwr) 4", beep cog brass inch, beep cog g. i. inch, beep cog pvc inch, froot wall cog set brass (light) inch, froot wall cog set brass (light) 1 inch, froot wall cog set brass (light) 1.1/2 , gate wall brass g.i. gun metal inch, gate wall brass g.i. gun metal 1 inch, gate wall brass g.i. gun metal 1.1/2 inch, gate wall brass g.i. gun metal 2" inch, gate wall brass g.i. gun metal 2.1/2 inch, gate wall brass g.i. gun metal 3" inch, brass spendal half turn 1 no., brass spendal half turn 2 no., brass spendal half turn 3 no., brass spendal full turn 1 no., brass spendal full turn 2 no., brass spendal full turn 3 no., j. p. jointer g. i. 1 inch, j. p. jointer g. i. 1.1/2 inch, j. p. jointer g. i. 2" inch, j. p. jointer g. i. 2.1/2 inch, j. p. jointer g. i. 3" inch, piller cog steel x6 , piller cog steel x9 , piller cog steel x12 , piller cog brass x6 , piller cog brass x9 , piller cog brass x12 , pillar cog steel (2 in 1), flush tank pvc, flush saypan (waser), pvc connection x12 , pvc connection x18 , pvc connection x24 , pvc connection x36 , pvc waste pipe 1.1/4 inch, waste cupling brass 1.1/4 inch, waste cupling upvc 1.1/4 inch, waste cupling pvc 1.1/4 inch, wast cupling steel 1.1/4 inch, n.r.b. non return wall g. i. 1 inch, n.r.b. non return wall g. i. 1.1/2 inch, n.r.b. non return wall g. i. 2 inch, n.r.b. non return wall g. i. 2.1/2 inch, n.r.b. non return wall g. i. 3 inch, n.r.b. non return wall brass 1 inch, n.r.b. non return wall brass 1.1/2 inch, n.r.b. non return wall brass 2 inch, n.r.b. non return wall brass 2.1/2 inch, n.r.b. non return wall brass 3 inch, half shut bent cpvc , pvc tee with cap 1.1/2 , pvc tee with cap pvc2 , pvc tee with cap 2.1/2 , pvc tee with cap 3 , pvc tee with cap 4 , pvc elbow with cap 1.1/2 , pvc elbow with cap pvc2 , pvc elbow with cap 2.1/2 , pvc elbow with cap 3 , pvc elbow with cap 4 , pvc nahani trip 1 way, flush fitting kit pvc, sun, tef
Tender For supply of xlpe cable for working voltage up to and including 1.1 kv marked to is 7098 (part 1) (q2) , led luminaire for floodlight conforming to is 10322 (part 5/section 5) (v3) (under bis scheme - ii) (q2) , led luminaire for road and street lights conforming to is 10322 (part 5/section 3) (v3) (under bis scheme - ii) (q2) , led bulb 5 watt , mccb 4 pole 100 amps 25 ka , mccb 4 pole 63 amps 35 ka , cp bib tap short body 15mm , cp centre hole basin mixture , cp angle stop cock , cp concealed stop cock 15 mm , cp stop valve 15mm female thread , pvc mirror looking 450 by 600 by 4mm , pvc seat cover for ewc white , ss plate rack 31 inch 24 inch 10 inch , pbs roll tarfelt 1 of 20mtr , cp bottle trap , shower rose pvc 15mm with arm , jet spray suitable for ewc or ango indian ewc including fitting , cp towel rack , cp sink mixture with regular spout wall , tee gi 15 mm , urinal pot flat back of sizes full stall , cp leg for wall mixture 15mm dia , pvc plain bend 110mm dia , taflon tap , open execution type c line change over 4 pole 200 amps , ppr pipe 32mm , non return valve 150mm , gi union 25 mm , prelaminated mdf board 19 or 18mm thick exterior grade type i of size 8feet by 4 feet , laminated sheet decorative type of size 8 feet by 4feet by 0.8mm thick , plywood commercial bwr gd 8 feet by 4 feet by 6mm , plywood bwr 8 feet by 4 feet by 3mm thick , emery paper 100 grit 230mm by 280mm , ppgi sheet 0.5mm thick 1060 mm wide 3600 long , pvc storage tank double layer cylindrical vertical of 1000 ltrs capacity , single core 4 sqmm fr lsh pvc insulated industrial grade copper conductor , led inverter tube light 1 of 20w warm white pvc housing , ppgi sheet 0.5mm thick 20 feet by 3 feet , cp towel rail 15mm by 600mm , mcb single pole 16 amp , gun metal gate valve 15mm , connection pipe pvc 15 by 600mm , towel rail cp 15mm by 450mm long , elbow gi reducing 25 by 40mm , ppr pipe 25mm , cp bib cock swan neck , ppgi sheet corrugated 10 feet by 3 feet , flexible wire twin twisted 23 oblique 0076 sqmm , aluminium door handle size 100mm , switch socket combination 5 or 16 amps 6 pin with pvc box , pvc flush bend pipe for flushing cistern , tape insulation of size 20 mm of 25 mtr , switch piano type 5 or 6 amp one way , laminated hylum sheet 3 mm thick of size 7 feet by 5 feet , grafting cp round 125mm , bell push switch piano type 6 amp , pvc hylum sheet of sizes 300 by 150 by 3mm , alum sliding door bolt 300mm , submersed cable 16 sqmm copper 3 core flat , motor starter 20hp , motor starter 15hp , gate valve gm 40mm , gi socket 20 mm , cushion foam fabric for stool for dressing 400 mm by 300 mm by 75 mm thick 32 density , varnish copal , french polish , paint synthetic enamelled of black , cloth tapestry superior quality of size 48 inch wide for sofa , copper sulphate , copper sheathed round cable 1.5 sqmm 3 core , three way elbow 32 mm dia , gi check nut 32 mm dia , gi pipe 32mm dia 6 mtr long , inverter arch welding set 320 amp , cut of saw 14 inch , jigsaw //bid details 2 / 69
Tender For tender for supply of electrolyte hand pump with extn pipe , hydrometer float 1240-1300 , copper washer , wrench (box spanner) for transportation vent plug , plastic hermetical sealing plug , explosion proof vent plug , batter cooling nipple (stud with cooling hosenipple) 7 con , helicoil spring for m16 x 2p thread ss-316 , ss cap nut
Tender For supply of water supply items to h malligere grama panchayath - hmm_ motor rewinding labour and workshop turning fitting charges , hmm_ motor lifing erection and service fitting , hmm_ hand pump lifting erection and service, hmm_ starter board wiring electrical service and fitting , hmm_ over tank gatevalve gm rod lathe threading charge and service, hmm_ 5 inch fta, hmm_ 6 inch fta, hmm_ 5 inch mta, hmm_ 6 inch mta, hmm_ 5 inch pvc tee , hmm_ 6 inch pvc tee , hmm_ 6 inch plain end, hmm_ 5 inch pvc pipe bend, hmm_ 6 inch pvc pipe bend, hmm_ 5 inch pvc elbow, hmm_ 6 inch pvc elbow, hmm_ 5 inch pvc pipe, hmm_ 6 inch pvc pipe, hmm_ 5 inch pvc collar, hmm_ 6 inch pvc collar, hmm_ 5 inch repair collar, hmm_ 6 inch repair collar, hmm_ 7.5hp to15hp preventor, hmm_ relay unit-motor, hmm_ 6 inch threaded end cap, hmm_ 2 inch gi pipe, hmm_ amps meter, hmm_ 2 inch bore clamp, hmm_ 2.5 inch bore clamp, hmm_ contactor unit, hmm_ 7 inch cassing pipe, hmm_ dol starter m, hmm_ dol starter ltlk, hmm_ electrical contact kit, hmm_ dol electrical panel board, hmm_ sada electrical panel board, hmm_ 100amps fuse unit, hmm_ 63amps fuse unit, hmm_ 4sqmm 3core copper cable flat type, hmm_ indicator, hmm_ mrf tape, hmm_ no volt coil, hmm_ 10 stage pump, hmm_ 12 stage pump, hmm_ pcv tape roll, hmm_ 7.5hp preventor, hmm_ relay ltlk, hmm_ 1.2 mm rewinding copper wire, hmm_ shalk thrid, hmm_ volt meter, hmm_ 6 hp motor pump with 10 stage, hmm_ 7.5 hp motor pump with 12 stage, hmm_ bolt nut 3by8 inch, hmm_ bolt nut 5by8 inch, hmm_ rotor bush, hmm_ do bush, hmm_ stg bush, hmm_ bucket washer, hmm_ borewell handle, hmm_ borewell head, hmm_ borewell water tank, hmm_ borewell pedestal stand, hmm_ cylinder, hmm_ mcb 4 pole, hmm_ 1.25 inch gi collar long, hmm_ 1.25 inch gi pipe, hmm_ 0.5 inch gi tap, hmm_ 0.75 inch gi tap, hmm_ gm upper valve, hmm_ gm lower valve, hmm_ impellers, hmm_ m-12 boltnuts, hmm_ nrv lather, hmm_ plunger rod 3 meter, hmm_ x nipple, hmm_ 2hp v4 sm motor pump 20stage, hmm_ 3hp v4 sm motor pump 30stage, hmm_ 0.75 inch cpvc ball valve, hmm_ 1 inch cpvc ball valve, hmm_ cpvc gum 29ml, hmm_ 0.75 inch cpvc union and tank nipple, hmm_ 1 inch cpvc union and tank nipple, hmm_ gargen pipe 0.75 inch , hmm_ gargen pipe 1 inch , hmm_ hdpe end connector, hmm_ 1.25 inch hdpe pipe, hmm_ 1.5 inch hdpe pipe, hmm_ 0.5 inch pvc mta & fta & end cap, hmm_ 0.75 inch pvc mta & fta & end cap, hmm_ 1 inch pvc mta & fta & end cap, hmm_ 1.25 inch pvc mta & fta & end cap, hmm_ 1.5 inch pvc mta & fta & end cap, hmm_ 2 inch pvc mta & fta & end cap, hmm_ 2.5 inch pvc mta & fta & end cap, hmm_ 3 inch pvc mta & fta & end cap, hmm_ stick & paper, hmm_ solvent cement 100, hmm_ solvent cement 50, hmm_ solvent cement 250, hmm_ thrust bearing & bottom, hmm_ 0.75 inch cpvc elbow & collar, hmm_ 1 inch cpvc elbow & collar, hmm_ 0.75 inch cpvc tee, fta, mta, hmm_ 1 inch cpvc tee, fta, mta, hmm_ 0.75 inch cpvc pipe, hmm_ 1 inch cpvc pipe, hmm_ 0.5 inch pvc ball valve, hmm_ 0.75 inch pvc ball valve, hmm_ 1 inch pvc ball valve, hmm_ 1.25 inch pvc ball valve, hmm_ 1.5 inch pvc ball valve, hmm_ 2 inch pvc ball valve, hmm_ 2.5 inch pvc ball valve, hmm_ 3 inch pvc ball valve, hmm_ 4 inch pvc ball valve, hmm_ 2 inch pvc joint collar, hmm_ 2.5 inch pvc joint collar, hmm_ 3 inch pvc joint collar, hmm_ 1 inch pvc pipe collar, hmm_ 1.25 inch pvc pipe collar, hmm_ 1.5 inch pvc pipe collar, hmm_ 2 inch pvc pipe collar, hmm_ 2.5 inch pvc pipe collar, hmm_ 3 inch pvc pipe collar, hmm_ 4 inch pvc pipe collar, hmm_ 2 inch gi non return valve, hmm_ 2.5 inch gi non return valve, hmm_ 0.5 inch gi pipe nipple 1 feet, hmm_ 0.75 inch gi pipe nipple 1 feet, hmm_ 2 inch gi pipe nipple 1mtr, hmm_ 0.5 inch pvc elbow, hmm_ 0.75 inch pvc elbow, hmm_ 1 inch pvc elbow, hmm_ 1.25 inch pvc elbow, hmm_ 1.5 inch pvc elbow, hmm_ 2 inch pvc elbow, hmm_ 2.5 inch pvc elbow, hmm_ 3 inch pvc elbow, hmm_ 4 inch pvc elbow, hmm_ 0.5 inch pvc pipe, hm