Latest hot mix asphalt Tenders | Government hot mix asphalt Tenders

Central Government And Public Sector

CTN :44804249

21 Apr, 2026 29.63 Lacs

Delhi - Delhi

Tender For for the providing of building materials and execution the work under the work emergency repairs of the structures at the group of monuments, hauz khas, new delhi - material and work, un slacked lime (air tight packing/bass), river coarse sand free from clay, dust, foreign materials, surkhi of 1st class bricks free from clay, dust, foreign materials, belgiri dry, gur/ sheera (air tight packing/bass), gum, san, brick agg. (20 to 25 mm n/s)graded form, brick aggregate (10 to 20mm n/s) graded form, cr stone as per site incharge or site requirement, dq stone as per site incharge or site requirement, brickzira graded form, lakhori brick required size and shape, sun jute, pvc bucket standard size, pvc mug standard size, pvc water tank 500 liters isi marked, pvc pan (tasla), green net, pvc gum boot, pvc pipe 1.5" isi marked, work in progress board with ms angle iron 25x25x5 mm with 1mm ms sheet in both side of writing in hindi & english etc complete, pvc helmet for labour isi marked, safety jacket for labour isi marked, safety belt isi marked, pvc drum 200ltr, tell -tale as per site required, copper dowels (size 6inch), araldite standard epoxy adhesive (resin 1kg + hardener 800g), provision for photo documentation of conservation work before, during & after the execution of work in proper album two set, structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete., providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 metre openable length ( total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron y shaped placed 2.4m or 3.00 m apart and with 9 horizontal r.b.t. reinforced barbed wire, stud tied with g.i. staples and g.i. clips to retain horizontal, including necessary bolts or g.i. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape(r.b.t.) / spring core (2.5 mm thick) wire of high tensile strength of 165 kg/ sq. mm with tape (0.52 mm thick) and weight 43.478 gm/ metre (cost of m.s. angle, c.c. blocks shall be paid separately){m}, earth work in excavation by mechanical means (hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by engineer-in-charge., demolishing lime concrete manually/ by mechanical means and disposal of material within 50 metres lead as per direction of engineer- in-charge, dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead dismantling old lime plaster, disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of engineer-in-charge., "providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40 mm dia m.s. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with m.s. tubes, m.s. tube challis, m.s. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. the scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety feat

Central Government/Public Sector

CTN :44858347

04 May, 2026 8.42 Lacs

Warangal-T - Telangana

Tender For civil and electrical repair of old false ceiling false ceiling in new chemical and biotechnology department building conference hall 5th floor and new metallurgical and materials department building conference hall dias room 5th floor at nit warangal

Central Government And Public Sector

CTN :44818015

18 Apr, 2026 1.65 Lacs

Hyderabad-T - Telangana

Tender For erection of 3x 9.00 m poles( with dept. materials) including horizontal and vertical gantry on terrace of building (gplus1) at kollur ii-2 bhk dignity housing colony_nbsnl (site id md5122), patancheruvu sdca, sangareddy oa, medak ba

State Government

CTN :44861780

20 Apr, 2026 80.00 Lacs

Ajmer - Rajasthan

Tender For cement class (category a)for block (category b)iron articles, other building materials and electrical and sanitary (category c)

State Government

CTN :44861835

20 Apr, 2026 80.00 Lacs

Ajmer - Rajasthan

Tender For cement class (category a),for block (category b),iron articles, other building materials and electrical and sanitary (category c)

CTN :44863861

22 Apr, 2026 19.60 Lacs

Jaipur - Rajasthan

Tender For नगर निगम जयपुर में स्थित मुख्यालय भवन के सभासद भवन में ए.सी. विद्युत का रखरखाव का कार्य (मय सामान) 03 वर्ष हेतु (वार्षिक दर संविदा) वर्ष 2026-27. -maintenance work for ac electrical systems (including materials) at the sabhasad bhawan, located within the headquarters building of the jaipur municipal corporation, for a period of 03 years (annual rate contract) — year 2026-27.

Central Government/Public Sector

CTN :44264012

15 Apr, 2026 NA

Mysore - Karnataka

Tender For bid to ras corrigendum : supply of ear mould materials - ear light, impression syringe big, impression syringe small, silicon impression material, silicon packing material, silicon injector for 48ml cartridge, pre bend sound tube (1.5x2.5mm), pre bend sound tube (2.5 x 3.5mm), lacquer for soft mould, air blower, stone plaster, cold cure repair material, cold mould seal, 3b resin clear, hard uv polymerisation liquid clear, hard uv lacquer 250 ml, ear model, conical shaped stone trimmer, pear shaped stone trimmer, surgical face mask, non-woven apron, plugger, probe, mixing spatula, plaster knife, plaster carver, ear mould designer, chitu box pro, bush for micro motor, resin saturn ultra clear, resin tank, building plates, dipping wax, pulling string roll, lp cleaner, liquid hand wash, disposable cups, cloth lined cover, nitrile gloves small, nitrile gloves medium, nitrile gloves large, zip lock cover, tube expander, petroleum jelly, bonding agent, heavy duty micro cutting plier, oto blocks large, isopropyl alcohol, premium soft tissue, sand paper holder, sand paper, elegoo saturn 3 ultra lcd screen, rubber sheet roll, cutting plier, screw driver, spray bottle

CTN :44832798

30 Apr, 2026 30.22 Lacs

Sidhauli - Uttar Pradesh

Tender For construction of a cc road in ward no. 10 of nagar panchayat sahjanwa situated adjacent to the railway overbridge extending from the premises of rajput building materials to umesh gupta house.

State Government

CTN :44834726

17 Apr, 2026 NA

Jalgaon - Maharashtra

Tender For supply of materials for construction work of gram panchayat office building at nhavi pra a tal yawal dist jalgaon

State Government

CTN :44808339

20 Apr, 2026 80.00 Lacs

Ajmer - Rajasthan

Tender For work open tender gp kirap mg nrega tender 2026-27 - cement class (category a) , for block (category b) , iron articles, other building materials and electrical and sanitary (category c)

Hot Mix Asphalt Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors