Latest hp cylinder Tenders | Government hp cylinder Tenders

CTN :45738737

11 Jul, 2026 NA

Hyderabad - Telangana

Tender For argon gas 99.999% - 140 bar per cylinder - refilling - 7cbm , nitrogen gas 99.999% - 140 bar per cylinder - refilling - 7cbm

Central Government/Public Sector

CTN :45718204

20 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of refilling of argon gas cylinder, ultra-high purity (uhp, purity 99.9995%), grade-1 , qty: 07 cubic meter per cylinder, suitable for oes as per technical attached. purity certificate of analysis by oes spectrometer purchased vide cofmow ot no. cofmow/ir/s/op-609672 date 20.12.2022. firm shall deliver thecylinder to the consignee destination. note: - 1. firm should make delivery of gas cylinders at consignee's premise as and when required. 2. empty cylinder not available at consignee end. [ warranty period: 12 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45702839

03 Jul, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of depot ferrous scrap - scrap ferrous components consisting of scrap ferrous all ferrous item pinion 15,16 & 21 teeth, racer nu2236, racer nj 320, set of laby outer grease cover de, set of laby outer grease cover nde & de, set of labyrinth de stopper, set of laby nde stopper, housing speed probe & de side side inner cover for 3 phase, nde side inner cover for 3 phase, end frame de side, nj ring, brush pressure setting machine & miscellneous nut bolt & pocket cover, de cap labyrinth deflector, de side stopper, nde side stopper, speed sensorcover nde, locking plate for 3 phase tm rocket ring fork & bearing cover for hitachi. nj ring for three phase, set of arcing horn & fixing bracket & nde side inner cover for 3 phase, inner racer nu2236, inner racer n320, nj ring for hitachi tm & inner bearing cover stoper for hitachi tm & inner bearing cover for hitachi tm ce side, equiliser beam short & long of wag-5, servomoter, plunger for pantograph, end shield (mvmt) nde & de, mcp grease plate, mcp end shield (de & nde), arno grease plate, mvmt grease plate, mcp grease plate, cooling fan mcp, free end cover, lp cylinder, hp cylinder, crank for compressor & other released item from ac loco (insulation= 41.61 kg approx). weight= 25.972 mts. for custodian information ss-11 no. nkj/trs/scf/26-27/5 dt. 01.06.2026. ds-8 note no. 020720 dt. 01.06.2026. mode of delivery by actual weight only. (remark- 1. sale condition "as is where is basis" & uniform sale condition for e-auction is applicable. 2. the purchaser of the awarded lot are advised not to wait for last date of fdp considering the forthcoming mansoon season. all efforts should be made to lift the lot as early as possible.)

Central Government/Public Sector

CTN :45702761

03 Jul, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - cond.& u/s diesel/emu/c&w/lhb, equilising beam, buffer, ac loco components such as tooth gears, crank shaft, brake disc, pinion, injector, gear wheel, cylinder liners, grease cup, alternator fan cover filter assembly, cattle guard, sab air brake components,air brake cylinder components, shock absorber, cattle guard, linear,traction motor spare parts, dust collector,tapperbearing with polimer cage,doubelcupcollar,shockabsorber,hp cylinder rail guard, outer/inner sleeves of bearing bolts& nuts, air filter, damper, lube oil filter, tiny springs,rotor, anchor link scrap, sab components, cutoff angle cock, control arm upper, ca lower, traction rod, anti roll bar assembly, axle box components, gears, brake disk, leaf spring, carrier assembly, bearing bolt, centering device, fork eye, coupler sleeve, air pipe assembly, break shoe bolster link, hoop coupler, parking break assembly,primary and secondary springs,footsteps,bolster hanger, dust guard, wearing plate, compensating ring, impeller, inner hanger,iron bracket above transformer, brake gear components, spring plate, coupler sleeve, brake hanger, yoke lead, coupler bearing, coupler rear plate, coupler clearance plates, wearing plate, brake beam, dust covers, collar, dashpot top, protective tube, gear case vocer, side bearer cover, pins for hanger, machinery items cut pieces, shock absorber, nipplers, cutout cocks, etc., tm pinion, tm parts as holder plate and end shield, axle box parts as axle box cover,boldter,oilcup,angles,equilising stay,pipes,nosepad,lsbeam,cibrakeblock , automobile parts,silentblock,impeller housing,cowl, axle guide and racer, traction link, the bar, traction housing,brake hangar, pull rod, slack adjuster, knuckle, clevis, screw coupling, cbc coupler and parts, fuffer, cattle guard, labyrinth, bearing for axle box, traction motor and aux motors, damper, sand box, sand ejector, sand pipe, foot step, sand ejector., angle cock and ferrous couplings, lathe machine head, junction box, cutting ferrous, angles, rod, ferrous heater coils, ferrous lamp pipe, transformet brackets, oil lubricator for suspension bearing, lid for gear case, linear, push rod &gudgeon pin, compressor, hood with impeller,ocb ducts, labyrinth, end frame tamper, hanger link, cylinder linear, oil dispersive, axle box cover, servo motor, striker casting with grease adherings(diesel),castiron components, impeller, guard, compartment sliding doors, compensating ring, end sheild, cartridge with nu bearing,pipe, drum,hoist, gear, impeller, eot crane wheels, eot crane gears , side rod, pull rod, pinion wheel, pull lift chain, door closer, emu coupler,inter cooler, engine head, covers, dooms, pipes, tank, front cover, rear cover, hand rail, after cooler, cylinder body, spring piston, holder plate,sand box, labyrinth, lhb bearings, outer bearing covers, end shield, piston trunk, adjusting rod, palm pull rod, control arm, dbr rf boxes,hoods, brake hanger, brake hanger with head, brake head & semi permanent coupler and parts, bmbc components, bend cover, inspection cover, centrifugal dust collector, cut off angle cock, safety rod, racker arm, valve plate, cylinder bore, bearing cover, emu sliding door, silencer, racer, raiser, bellow plate, door operating cylinder scrap, msu components scrap, labyrinth &pinion shaft(diesel), compensation ring, buff gear, hood with impeller, ront fork complete housing, lb spring set scrap, stator w/o coil, contering dis, anger link with or w/o silent block, oil cup and all other scraps released from diesel / ac loco/emu/c&w/lhb components and all other ms/ci with/without minor non ferrous attachments in as is where is condition. pl no. 98050126. custodian: cdms-rsf-gsd-per. note: 1) cutting permitted to loadable sizes only. 2) during delivery if any major non-ferrous items found the same should be handed over to custodian. 3) loading by crane / jcb is also permitted. location: bin n

Central Government/Public Sector

CTN :45555551

06 Jul, 2026 NA

Nasikcity - Maharashtra

Tender For corrigendum : supply of gas argon (refilling) grade-3, 99.993%, high purity, capacity of each cylinder is 07 cubicmeter to is 5760/1998 .. cumt. reaffiremed 2003 2nd rev. [ warranty period: 30 months after the date of delivery ] ]

Central Government/Public Sector

CTN :45682184

30 Jun, 2026 NA

Samastipur - Bihar

Tender For supply of set of l.p. cylinder dia 127mm & h.p. cylinder dia-100mm for elgi compressor (rr20100/rr20100 cgm) each consisting of following:- (a) l.p. cylinder dia 127mm as per elgi pt. no. - 070200100- 02nos/set (b) h.p. cylinder dia 100mm as per elgi pt. no. - 070300540- 01no/set [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45449572

03 Jul, 2026 NA

Thumba - Kerala

Tender For corrigendum : tender for supply of spares of water jet machine - hp seal assembly part no 20422243 , liner hp cylinder part no 20497767 , hydraulic catridge seal assembly part no 5130091 , valve seat part no 10178697 , seal assembly part no 20428052 , abrasive feed tube part no 20453964 , spring check valve part no 5147863 , ring backup pneumatic part no 10188233 , ring backup pneumatic part no 10187250 , stem pneumatic valve part no 20435636 , hp nipple tube 9 by 16 inch l 257 mm part no 5105473 , nozzle tube hp part no 10138428 , filter element 10 micron part no 72125264 , pure goop part no 10084440 , focusing tube 1 point 1 part no 1000005 43 313 , orifice saphire 0 point 3 part no 80230

State Government

CTN :45672365

09 Jul, 2026 10.01 Lacs

Bhopal - Madhya Pradesh

Tender For supply of consumables stationery and other miscellaneous items - photo copy paper 80 gsm a4 size , photo copy paper bond paper a4 100gsm , photo copy paper a3 size 80gsm , photo copy paper 80gsm legal size , tags less for files length 175mm , desktop calculator lcd led , file folder clear bag folder legal size , highlighter pen multicolour , stapler 24 6 , stapler 10 4 , marker slim , gel pen blue uniball , glu stick set , paper punching machine double hole , paper punching machine single hole , roller ball pen blue , duplex arch box file a4 , register121150pages 2 core , register201250pages 4 core , register351400pages 6 core , register 55060 0pages 8 core , attendance register 41100 pages , pad steno book pad , matric plastic scale 30cm , wooden pen holder , glossy paper 130gsm , stamp pad ink pad , paper weight , sketch pen packet , dak ped size of dak pad 250x345mm or higher , tape dispenser , ink bottle black blue , envelope cd maler 9x6 , envelope a4 size , document chheda tocha , battery cells aaa , battery cells aa , stick notes , correction pen whitener , cobra file , blank dvd , pencil , fevicol , tpin , report enveloped brown , glass marking pencil with pointed tips , alpin holder , white absorbent sheet , lfile folder , stick file folder , dak enveloped brown , awak panji income registe , envelopes size 12 16 , printed file cover 30 x 23cm each , sticker , prakaran darj register praishist ga case filed register appendix , log bookregister praishist cha , purani file dene ka register praishist chha , uchch nyayaly register praishist cha , jila nyayalay register praishist jha , brown paper rim for packing of forensic exhibits , polypropylene sutli for packing of forensic exhibits , sealing wax , exhibit packing bag 2kg , exhibit packing bag 5kg , exhibit packing bag 10kg , exhibit packing bag 15kg , forensic exhibit packing enveloped lxw 21x29 7 cm or a4 size , forensic exhibit packing enveloped lxw 420x29 7 cm or a3 size , forensic exhibit packing enveloped lxw 216x35 6 cm or legal size , forensic exhibit packing enveloped lxw 11x5 cm or equivalent , printed selfsealing cloth for exhibit packing bag 5x11 inch , printed selfsealing cloth for exhibit packing bag 10x12 inch , printed selfsealing cloth exhibit packing bag 16x12 inch , packing tape as for user requirement 0 5inches transparent , packing tape as for user requirement 1inches transparent , packing tape as for user requirement 2inches transparent , packing tape as for user requirement 0 5inches broun , packing tape as for user requirement 1inches broun , packing tape as for user requirement 2inches broun , sanitizer 200ml , tissue two plies 200pulls per pack , tissue one plies 50pulls per pack , high quality tissue box , mask , gloves size m , gloves size l , surgical blade 20 no , surgical blade 22 no , scissor plastic thickness 1 7mm , zipper pouch , cotton roll , sand paper , exhibit tray , apron , garbage bags 2 kg , garbage bags 5 kg , high density plastic container 20ltr , high density plastic container 10ltr , measuring tape , plastic wash bottle 1ltr , mug , all out with refill , test tube brash , bottle washing brush , dropper 6 inch , aluminum foil paper , air gas cylinder refiling , nitrogen gas cylinder refiling , argon gas cylinder , helium gas cylinder , hydrogen gas cylinder , esd slippers 10 number , esd slippers 7number , sens room freshener ocean mist spray , 20ml vial , 2ml vial , water jug , water glass , water bottle , water battle hdpe high density polyethylene , water cattle , thermosteel water bottle , tea cup , tea tray , domestic plate bone china , disposable tea cup , disposable white plate , water glass disposable , bisleri 250ml water bottle pack of 24 , bisleri 500ml water bottle pack of 24 , coil heater , heatingcoil 1500 watts , cotton hand white towel , towel big , cleaning duster , computer cleaning clothes , latta clothes , basta clothes , door mat 45cm x 75 cm , door mat 60cm x 90 cm , lock medium , nescafe coffee , 2 in 1

Central Government/Public Sector

CTN :45644711

10 Aug, 2026 NA

Bikaner - Rajasthan

Tender For supply of shielding gas-mixture consisting of argon and 1-5 % oxygen gas as per specification aws a 5.32/a5.32m-97(r 2007) and irs m:46/2020 table-1 class vi filled in cylinders with capacity of 7/11/14 cum and maximum working pressure of 150 bar for mig welding purpose. packing and transportation of the cylinder as per gas cylinder rules of 2016 of govt. of india [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government/Public Sector

CTN :45407110

24 Jun, 2026 NA

Koraput - Odisha

Tender For bid to ras tender for supply of 5 types of gases : - argon gas in cylinders of capacity 7 cubic mtr , argon gas in cylinders of capacity 7 cubic mtr including repair of cylinder , nitrogen gas in cylinders of capacity 7 cubic mtr , nitrogen gas in cylinders of capacity 7 cubic mtr including repair of cylinder , hydrogen gas in cylinders of capacity 7 cubic mtr , hydrogen gas in cylinders of capacity 7 cubic mtr including repair of cylinder , dissolved acetylene in cylinders of capacity 7 cubic mtr , dissolved acetylene in cylinders of capacity 7 cubic mtr including repair of cylinder , anhydrous ammonia in cylinders of capacity 50 kg , anhydrous ammonia in cylinders of capacity 50 kg including repair of cylinder

Hp Cylinder Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors