Latest hpsv lamps Tenders | Government hpsv lamps Tenders

Central Government And Public Sector

CTN :45727638

15 Jul, 2026 NA

Durg - Chhattisgarh

Tender For supply of metal oxide gapless lightning arrestor/surge arrestor for 25kv bg ac emu/memu/3ph loco as per rdso specification no. spec/e-1/2/05, dated-1987, ammendment-1 or latest or clw specification no.clw-es-3-0016, alt-b or latest. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45334872

02 Jul, 2026 NA

Varanasi - Uttar Pradesh

Tender For corrigendum : ner acting for and on behalf of the president of india invites e-tenders against tender noner_snt_proj_bsb_02_2026 closing date/time 21/07/2026 12:30 hrs. bidders will be able to submit theiroriginal/revised bids upto closing date and time only. manual o ers are not allowed against this tender, and any suchmanual offer received shall be ignored.1. nit headername of worksurvey, design, supply, installation,testing, and commissioning of automaticblock signaling work utilizing multi- section digital axle counters (msdac) forcontinuous track circuiting including associated auxiliary works at adjoiningstations along with 4x48 ofc work in the aunrihar jn (arj) - varanasi city (bcy) &banaras (bnrs) -prayagraj rambag (prrb) sections and ei (indoor) works atsarnath(srnt), kadipur (kdq) and rajwari (rji) stns in the varanasi division ofn.e. railway.bidding typenormal tendertender typeopenbidding systemtwo packet systemtender closing datetime21/07/2026 12:30date time of uploadingtender22/05/2026 16:43pre-bid conferencerequiredyespre-bid conference datetime05/06/2026 11:30advertised value 1287170067.90 tendering section projectbsbbidding stylesingle rate for eachschedulebidding unitearnest money (rs.) 25743400.00validity of offer ( days) 90tender doc. cost (rs.)0.00period of completion 18 monthscontract type works - general contract category expenditurebidding start date 07/07/2026are jv allowed to bid yesnumber of jv memberallowed3are consortium allowedto bidnonumber of consortiummember allowed0ranking order for bidslowest to highest expenditure typecapital (works)2. schedules.no. itemcodeitem qtyqty unitunit ratebasic value escl.(%) amount biddingunitschedule () a1-electronic interlocking items350653086.18above/below/para1001 3.00 station17259924.6951779774.07 at par51779774.07page 1 of 27run date/time: 10/06/2026 15:39:01ner hq-s and t/north eastern rlytender documenttender no: ner_snt_proj_bsb_02_2026closing date/time: 21/07/2026 12:301description:- design, manufacture, supply of hot standby architecture electronic interlocking (ei)system complete as per rdso spec. rdso/spn/192/2019 version 2 (or with latest amendment ifany) for stations as per tech. spec. given in tender document, mainly consisting of microprocessorbased cpu card, input card, output card, interfacing equipment and all type of interfacing relays,suitable for re. for system 'a' & 'b' of ei, segregation between the dc-dc converters shouldbemade so that in case of failure, only one system is a ected, and dc-dc converters shall beprovided in n+1 con guration. dual vdu for operation (2 no. of fanless embedded industrial gradepcs, 2 nos. industrial grade 55" 4khd led vdu and 1 no. maintenance console (fanless embeddedindustrial grade pc and industrial grade 55" 4khd led vdu with ups, backup min. 1 hr. & printercolor laserjet with scanning facility similar to hp mfp 3303sdw) as per rdso's tan no.sts/e/tan/3007 ver. 2.0 dt.22.04.2026 (latest), interconnecting cables, rack for ei card, relayrack, ct rack (including terminals), connector, fixtures, mounting arrangement, lightning arrestor,m f earth connections (as per latest tan issued) etc. & accessories necessary to make ei systemfunctional for stations as per approved sip, from ei system up to ct rack, design of circuits andpreparation of wiring diagrams, power supply arrangement on main cabin (railway will provide 110 vdc only.), ofc connectivity (patch cords) as per requirement of system, protocol converter fordataloggers at main cabin (supply and installation of data logger is covered as separate item of theschedule). note:- (i). tenderer should submit details of individual cards/ modules with item wisedetails, rate and quantity in proforma attached as annexure - 'a' prior to ca. (ii). item wise ratesare for indicative purpose, not be used for evaluation. any extra item required for commissioning ofei system will be borne by the contractor without any extra cost.(iii). the el system including

Central Government/Public Sector

CTN :45588664

25 Jun, 2026 NA

Mysore - Karnataka

Tender For set of metal oxide gapless lightning arrestors for 25 kv ac as per clause 4.4 of rdso specification no. rdso/pe/spec/emu/0196-2019(latest) suitable for vande bharat rake version 2.0. one set consist of: - a). surge arrester, class-4, 40kv -01 nos. b). surge arrester, class-3, 42kv -01 nos. note: - 1). manufacturer test certificate and warranty certifcate to be produced during supply. 2). the firm should have succesful past perfomance for indened item in indian railways. [ warranty period: 24 months after the date of delivery ] ]

CTN :45580995

26 Jun, 2026 NA

Guna - Madhya Pradesh

Tender For supply of flood light luminaire suitable for hpsv lamps (q3)

Central Government And Public Sector

CTN :45514418

02 Jul, 2026 NA

Chittorgarh - Rajasthan

Tender For supply of ballasts for discharge lamps conforming to is 15882 (q3) , high pressure sodium vapour lamps (hpsv lamps) conforming to is 9974 (q3)

corporations/Associations/Others

CTN :45508661

15 Jun, 2026 NA

Raipur - Chhattisgarh

Tender For auction sale of scrap from works / products pvc scrap,scrap insulator from enabling works medium in size guy insulators for 11 kv,scrap small tools hdpe,scrap 11 kv disc fitting for disc insulators,scrap miscellaneous gi from enabling works old scrap junction box,scrap electrical item lightning arrester,scrap structural steel gi,scrap miscellaneous gi from works / products gi wire,scrap small tools gi from demolitions / dismantling / testing dead end clamp,scrap electrical cable moc aluminium from works / products,scrap small tools gi from demolitions / dismantling / testing suspension clamp,scrap electrical fitting from works / products medium in size,scrap from works / products 3c x 120 sq mm ug cable jointing kit,scrap from works / products cable end cap(3000sqm),scrap structural steel ms from works / products used bolts & nuts,scrap electrical cable aluminium from enabling works,scrap electrical cable aluminium from works / products aluminium armoured cable,scrap lt abc cable3cx701cx70 16sqmm,scrap pipe gi from demolitions / dismantling / testing medium in size,scrap insulator insulator broken

CTN :45356814

18 Jun, 2026 1.43 Lacs

Beed - Maharashtra

Tender For supply of high pressure sodium vapour lamps (hpsv lamps) conforming to is 9974 (q3)

Central Government/Public Sector

CTN :45317667

05 Jun, 2026 NA

Bokaro - Jharkhand

Tender For (a) repairing of 11kv, 400amps vcb switch biecco lowrie h.t. vcb, sl.no.vb8a at damoda fire area substation (b) repairing of hpsv lamps and other miscellaneous jobs at damoda colliery.

CTN :45159066

11 Jun, 2026 33.89 Lacs

Guna - Madhya Pradesh

Tender For supply of electrical materials for the repair and maintenance of street light as per the boq - details, t-5 power/energy saver 2x24w choke, t-5 power/energy saver 24w ftl tuberod, 2x24 t5-holder, t5 power saver 2x24 fixture acrylic transparent cover, t5 power saver 4x24 fixture acrylic transparent cover, 150w hpsv choke, 150w hpsv lamp, capacitor 33mfd 250vac 50 hz, electronic ignitor suitable for 150w hpsv lamps, 150w holder (porcelain), led driver 50w bis certified, led mcpcb plate 60w, led mcpcb plate 50w, led mcpcb plate 150w, supplyingof isi marked and approved make of moulded case circuit breaker(mccb) suitable for 3phase,3pole,50hz,415 volts, ac supply with respective interrupting capacity(ka) at 415 volts cited against their range standard conforming to is - 8828: 8.1mccb with breaking capacity 25 ka at 415 v: current rating -125 amps & 70% -100% adjustable, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light sub feeder panels - type 2 pluggable spd 3+1, rating l-n/n-pe uc 255/320 v in 30/60ka ka, lmax 30ka/60 ka, up 1.5kv, supplying of isi marked and accepted standard of miniature circuit breaker(mcb)ofcseries suitable for 240/415volts,50cycle,10ka value ac supply confirming to is:8828:1996,iec:60898 :2002 but without enclosures: single pole 63 amp., astronomical timer with dst feature, contactor 3 pole 90 amp 50hz 415volts with no-nc contacts, tpn connector 150a, supply of approved make powder coated sheet steel encloser spn mcb db inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator): 8 way double door, supply of sovp device should have single high capacity varistor in the l-n plug and encapsulated spark gap for n-pe, l-n sovp should have a rated voltage of minimum 320v ac to handle indian power supply conditions. sovp should have visual indication on replaceable varistor and spark gap modules as well as a potential free contact on the socket for remote indication. sovp device should be wired up as per tt configuration of wiring in accordance with en 61643-11 standards. both the l-n and n-pe, spds should be rated for handling 30ka of nominal 8/20 s surge current.: sovp for pole light - type 2 pluggable spd 1+1, rating l-n/n- pe uc 230/400 v in 5 ka, imax 10 ka, up 1.2kv, led batten tubelight 20w, supplying of approved make tpn mcbdb metal double door with provision for fpmcb/isolator/rccb/rcbo as incomer and sp mcbs as outgoing inclusive of busbar,neutral bar,earth bar & two earth terminals etc. complete as per is:13032 (exclusive of mcb & isolator ): 8 way (8+24), 8 sq.mm multistrand pvc insulated copper wire bundle 90mtr, 1.sq.mm aluminium single core wire bundle of 100mtr. isi marked, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 2-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 4-core isi marked with alu. stranded/solid conductor: 16 sq.mm unarmoured, xlpe insulated power cable( conforming is-7098 part-1) 1100 volt grade 1-core isi marked with alu. stranded/solid conductor: 25sq.mm unarmoured, wooden ladder 21ft, toolkit set consisting of different sizes l-keys, screw drivers, testers and plier set., taperoll box consisting of 30pcs (conforms to is: 7809 (part 3, sec 1),self extinguishing,protects from electrolytic corrosion,excellent water resistance,suitable for primary ins

corporations/Associations/Others

CTN :45246695

02 Jun, 2026 NA

Panaji - Goa

Tender For ghrssidc/e-t/2026-27/646 - electrical fabrication - a, la cross arm clamp for 7.5 mt rcc pole (gal v) - cee/e/523, sa cross arm clamp for 7.5 mt rcc pole (gal v) - gec/e/523, la cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, sa cross arm clamp for 9 mt rcc pole (gal v) - gec/e/524, la cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, sa cross arm clamp for 105 lbs/yd rail pole (gal) - gec/e/723, la cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, sa cross arm clamp for 60 lbs/yd rail pole (gal) - cee/e/486, la cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, sa cross arm clamp for 90 lbs/yd rail pole (gal) - cee/e/515, la stay clamp for 60 lbs/yd rail pole (gal) - cee/e/469, sa stay clamp for 60 lbs/yd rail pole (gal) - cee e 469, la stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, sa stay clamp for 90 lbs/yd rail pole (gal) - cee/e/508, la stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, sa stay clamp for 7.5 mtrs rcc pole galvanised - cee e 523, la stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, sa stay clamp for 105 lbs/yd rail pole (gal) - cee e 723, la stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, sa stay clamp for 9 mtrs rcc pole (gal v) - cee e 524, 11 kv v shaped cross arm (gal v) - cee e 408, 33 kv v shaped cross arm (gal v) - cee e 408, b type modified distribution box - cee e 386, a type street light meter box with clamps - cee e 386, stay set for 11 kv lt line - cee e 500, stay set for 33 kv line - cee e 500, turn buckle& eye bolt for 33 kv line - cee e 513, turn buckle& eye bolt for 11 kv line -cee e 466, cast iron packing piece 90 lb for rail pole - cee e 514, top insulators fitting for rcc pole - cee e 506, 4 pin angle type cross arm - cee e 702, 4 pin channel type cross arm - cee e703, 2 pin angle type cross arm - cee e704, 2 pin channel type cross arm - cee e 705, earthing pipe - cee e 467, sa cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la cross arm clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, la stay clamp for ht/lt line on 11 mt rcc pole made of 50 x 10 flat (g) - cee e 711, sa bottom clamps for fixing street light fixtures for 7.5/9mtrs rcc pole galvanised 25 mm pipe - cee e 12, sa top bottom clamps for fixing street light fixtures for 7.5 mts rcc pole galvanised 25 mm pipe - cee e 12, la top clamps for fixing street light fixtures for 7.5/9 mts rcc pole (gal v) 40 mm pipe - cee e 612a, sa top clamps for fixing street light fixtures for 7.5 rcc pole - cee e 612a, gi nut and bolts in various sizes electro galvanised, gi pins for lt pin insulator, gi pins for 11kv pin insulator, gi pins for 33kv pin insulator, gi bent pipe of nominal base 25 mm, 1 mts long for tube light fixture - cee/e 618, gi bent pipe of nominal base 25 mm, 1.5 mts long for hpsv lamps - cee/e 593a, b type modified distribution box with mccb and kit kat fuses as per cees specifications / drawings, metal parts for shackle insulators as per cees specifications, gi bent pipe of nominal base bar 40mm x 3 mts long (medium class) the pipe shaft should conform to is : 1239 (part i) 1973 as amended upto date - ee/ii/21/2009, hot dip galvanised earthing strips of size 30x160x5mm, hot dip galvanised earthing strips of size 100 x 360 x 3mm, g.i bent pipe nominal bore 40 mm ce/e xi for hpsv lamps - cee/e 593a, metal parts for disc insulator as per department 4 bolted. as per department specification & drawing - 60/4/va/cee/tech/2019-20/1282, metal parts for disc insulator 3 bolted - 60/4/va/cee/tech/2019-20/1282, kit kat fuse 100 amps, kit kat fuse 200 amps, kit kat fuses 300 amps, kit kat fuse 400 amps, tinned copper fuse wire of various sizes, aluminium crimping lugs 25 sq.mm, aluminium crimping lugs 35 sq.mm, aluminium crimping lugs 50 sq.mm, aluminium crimping lugs 70 sq.mm, aluminium crimping lugs 95 sq.mm, aluminiu

Hpsv Lamps Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government And Public Sector

Central Government/Public Sector

Central Government And Public Sector

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others