Latest hr coil scrap Tenders | Government hr coil scrap Tenders

corporations/Associations/Others

CTN :40518999

13 Jun, 2025 NA

Udyogamandal - Kerala

Tender For auction sale of rejected chlorine tonners,rejected chlorine cylinders,scrapped breathing air compressor,mixed scrap,cathode fine mesh,cathode coil cushion,anode mesh,used valves of chlorine cylinders,spindle of chlorine valves,used copper cables,nickel plates,hastelloy plates,thermit bearing metal,induction motors,old anthracite carbon,wet chlorine filter tank without cover

CTN :40253011

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras tender for supply of safety filter(jd mk-i plate-03) , bushing (plate-j-15) , lub fitting (ispl plate-i02) , cap screw m12 x 100 , turn indicating lamp lh(ispl plate-h03) , turn indicating lamp rh (ispl plate-h03) , washer(i01) , washer , rod (plate-i07) , flange nut(plate i-08) , stud(plate-j01) , t bolt type vacuum indicator(ispl plate-b03) , snap ring , wrench 10 (tat jd 315se mk-1 p-313 sl no-27) , tubuler spnr 12.5x21 , rod(plate -j01) , wear plate (ctlg plate-i10) , cap screw , adaptor( plate-j07) , hose clamp , rod , spanner 19x22(tool list) , hose clamp t bolt type , washer , accelerator rod , hex nut , rod(plate-j01) , rod , spnr 10x12 (tata jd 315se p-303 sl no-11) , fitting , knob , spanner 24x27mm (ojde) , rubber bellow (upper cooling water line to thermos , o ring(plate-k03) , valve(r2) , rod (plate-i08) , pin assy , adapter (ispl plate-j02) , wrench socket 2 , wire harness park break , union fitting (ispl plate-f05) , support(plate-j01) , adapter(plate-f03) , knob , push rod(r2) , spanner 24x27 mm (ojde) , rod , switch park brake(ms sl-286) , horn , flange nut , clamp (p-15) , tee fitting(p-179) , fitting (plate-j15) , wrench adjustable 305mm , jet assy , bell crank(plate-i08) , cap screw , arm service lock(plate i-06) , spacer(plate-j01) , grip with horn switch knob ctlg plate-j12) , o ring , hyd hose (ispl plate-f03) , spacer (plate-b06) , oil line (p-179) , hose assy , oil line(plate -f01) , spanner open end 18x 19 , hammer 1-1 by 2 , pin (ispl plate-i12) , spanner open end 16x 17 , pin , elbow fitting , elect temp gauge(ctlg plate-h05) , door retainer latch unit (tata jd 315v) , water reservoir , bushing , cabin harness , cutter for exhaust valve seat(smt-32) , knob(plate-j12) , switch pressure-(130psi) (price list tata jd 315v , stay rod lh & rh , hose , dial indicator , hose tank to fuel tank , pin(plate-j15) , pin (ispl plate-k03) , hyd hose (ms sl-314) , gear shaft lever switch assy , hydraulic hose , muffler extention(ispl plate-b04) , hydrolic hose (ispl plate-f01) , shaft seal , base , running disc , pedal lh (plate-j-15) , pedal rh (plate-j-15) , gauge speedometer (ispl plate-h03) , magnetic stand , hose (ispl plate-j04) , lever , knob , interior light (os sl no-407) , bar extension 2 , u ring , lever(plate-07) , tie rod end (ctlg plate-j01) , hose (ispl plate-b06) , digital hour meter (p-344) , wiper motor(ctlg plate-h02) , seal kit (p-347) , knob , tapper roller bearing (p-63) , screw joint coupling 9 by 26 inch (smt-28) , cassette ring (zf ser no 260) , tube , grab sleeve , assy hour meter(r1) , driver , assy tool box , measuring cover , indicator for transmeter , i clutch disk (ispl-old) , insert , handle set for water pump(smt-30) , piston rod s by a(315se mk-1 p-277) , atomiser assy includes 17 , 18 , 19 and 20 (ms sl-67) , steering cylinder (tata jd 315se plate j31) , cutter for 30o(smt-33) , instrument cluster , glass-4 , piston rod s a (315se mk-1 p-293) , wheel stud puller , glass-1 (tata jd 315v) , glass-6 (tata jd 315v) , glass 5(os sl no-347) , bell crank (plate-j-01) , straightedge , high pressure pump super(smt sl-10) , door glass rh & lh , fender l h (tata jd 315v) , fender (r h) (tata jd 315v) , seat(plate-g03) , entrance door(os sl no-335) , track rod , induction coil assy (ispl plate e4 , e6-7) , rear swivel door lh(os sl no-337) , rear swivel door rh(os sl no-338) , bucket tilt ldr cylinder , switch reverse control (ispl plate-c03) , single point ripper(ref-k03) , frame(i14) , wheel rim (hd) , backhoe bucket (0.09 cum)(tata jd mk-1 plate k04) , backhoe bucket(0.18 cum)-ispl plate-k05 , ditch cleaning bucket0.35 cum) , boom lock solenoid(ctlg plate-h02) , crain attachment hb crain , sliding frame(p-177) , converter (alt no from price list-15815) , converter , sliding frame with piston bushing 7 seal , gear box assy(zf p-64)

CTN :40469270

14 Jun, 2025 NA

North 24 Paragana - West Bengal

Tender For purchase of spares - rock breaker with chisel and moil(ref-xxxiac-1) , head front(ref no-a3-5-3) , turbo charger 1 h1 rh b-6(plate-z1 oblique 1) , cap screw (ms sl-245) , joint for del volute , bulb 12v 10w (feston) , wrench bar 6 , wrench bar 08 , by pass hose(ms-173) , o ring , adaptor , de spanner 16x17(jcb super, plate-v11d) , inner cable(d3-1-5) , bolt(plate xxxi c) , plate friction clutch (ctlg 3dx e5-1-30) , joint (for rocker cover)ms-162) , male cone blacking plug set (smt sl-09) , tooth point (ispl plate-k04) , bush (cat 3dx a2-1-1) , triple lip seal (f5-1-20) , wiper assy front(item no -955) , push rod(r2) , hose top(p4-4-2) , o ring for cyl liner(ms-157) , hose(e3-13-1) , plug water jacket(r2) , hose air induction , seal kit, steer ram(ms-464) , pin pivot(plate-a1-7-2) , hose 1 by 4 inch x 1 by 4 inch bspx1200 long , hose(plate-e1-13-1) , hose(e1-1-2) , tooth (ispl plate-i03) , door handle lh(plate -iv n-9) , joint, liner to head, 0.4mm thk , hose (e1-8-11) , rear frame hose retainer(ispl-938) , hose , fan face level 12v (c1-17-1) , throttle cable assembly (jcb super plate xi a) , hose 08 bsp hp 1910mm a , hose(plate-e1-9-15) , hose (1 by 2 inch bspx1 by 2 inch bspx1130mm long , hose 4 wd rh , gasket cyl head(plate-xxxiii a) , glass tinted left side(plate iv r-4, 379) , hose l h , hose(3dx ctlg e1-9-2) , window tinted glass rh(jcb super,366) , hose(sl-36922, price list) , hose , dowel(r2) , hydraulic hose (ispl plate-f01) , adjuster auto tensioner(plate-xxxviii a1) , nozzle(ms sl-574) , parkbrake caliper g.a (ispl sl-1691) , pin pivet 600mm wind jaw (ref-xxxif) , track rod end gaiter(f1-30-10 by 1a) , hose(plate-e1-9-12) , valve inlet , tool chisel(sl no-2351) , cap filter , universal driveshaft , pressure gauge kit with snap(smt sl-01) , cyl head sub assy , joint knukle swivel(f1-6-10) , grommet , self lubricating brg , leak off hose(ms-152)( plate no- p4-4-2, sl no-9) , nut castle m 20x1.5(f1-30-10) , spring brake shoe(ms-188) , strip 1260 mm long (jcb ms sl no 40) , gasket(ms sl-31) , interrior light (ispl-585) , plate door catch , oil seal 115x140x16 cr make(4r1040t ispl -oil seal , bearing bush ce(ms-189) , rubber hose(plate-l1-4-10) , bolt for con. rod(ms sl-545) , seal (r1 spare) , wiper blade(ms-79) , cap radiator , hose bottom radiator(p4-4-2) , oil ring , fuel filter element pre i 1 (mico no.1457431003) , sealing bush(ms-185) , pin pivot , fuel filter(plate-xxxviig, sl no-2538) , radiator assembly turbo , grommet cable harness( plate no- d1-21-2, sl no-17 , bulb 5 w , 10 amps fuse , de spanner 10x12 mm(plate-vii d -27) , wear pad(ms-27) , ring spanner 18x19mm(ispl sl-563) , screw driver 10 inch by 9 , o ring , female cone blanking plug set (smt sl-08) , friction plate(f5-3-40) , filter fuel secondry(amendment no1,ms-199, jcb 3dx , pipe fuel(plate-t, 44tc) , oil filter (ms sl-386) , ring sealing for bowl(ms sl-563) , gaiter hand brake , hose pipe for breather(ms sl-555) , hose - 4wd(ms-106) , hose(ms-97) , pivet pin alloy steel (ms sl-17) , lh lock assy(ms sl-49) , piston seal assy , working light(ms sl-94) , filter pre cleaner assy , pivot pin( ms sl no-10) , brush set(ms-194) , element , universel joint , piston seal(e4-1-6) , field coil assy(ms-195) , hydraulic hose (ms sl no 1789) , brake pad ga (ispl sl no-1695) , flange spanner for locking pinion mut(smt sl-04) , valve exhaust , silencer exhaust turbo(ms sl no--148,apr-2015) , solenoid switch , excavator valve (ispl plate-e3-6-1) , filter element, hyd oil(ispl plate-f06) , starter motor (item no- 76) (jcb super plate xx , fip 68 kw bs ii(item no-54) , arm loader short(ref no-b3-1-1) , axle arm & wheel hub assy (plate- xixb) , turbocharger 68 kw(ac)t3(plate- xxxix a-2544)

CTN :40388528

09 Jun, 2025 NA

Medak-T - Telangana

Tender For supply of coil coat for induction f/c. coils-al2o3: 74% min. ; sio2: 8.8% , cao: 11.5% ; tio2: 3.2% ; fe2o3: 0.3% ; electr

Central Government/Public Sector

CTN :40419689

11 Jun, 2025 NA

Mumbai - Maharashtra

Tender For induction coil , 35 ohms-75 ohms (* with permissible tolerance) for sge bell unit. sample sh ould be get approved before bulk supply. party to submit oem / authorization & test certificate with warran ty.(*+- 3% tolerance is permitted in resistance value) [ warranty period: 30 months after the date of deli very ]

CTN :39872681

23 May, 2025 3.73 Crore

Mumbai - Maharashtra

Tender For corrigendum : tender for supply of cranckshaft assembly , gasket kit , slide valve xrv204/145 part no.xr20513-2 , set shaft seal part no.08444 , seal ring 27 , 8x24 , 2x2 part no. 05791 , oil scraper ring piston 80 part no. 06368 , seeger circlip 20x1part no. 05569 , doublesloil contring 80 part no 06369 , set shaft seal part no08012 , set connecting rod part no. 08435 , set oil pump part no. 08795 , set oil filter not shown part no. 08457 , set rear bearing part no. 08465 , set start unloader 24 v dc , valve plate assembly part no 08436 , set shaft seal part no. 08008 , set piston dia 70 part no. 08035 , setcrankshaft part no. 08056 , set shut-off valve nw32 part no 08082 , set of bearing compressor , set of bearing for fx/f5 bi compressor , metalflex coupling for comprressor for 144 tr ac plant , set of gaskets for condenser for 144tr acplant for p17 class , set gaskets for evaporator for 144 tr ac plant , oil seperator danfoss oub 4 for 2 x 2.1 tr ref plant , valve three way type 1/ 4npt(m) x 1/ 4 flare , valve hand shut off type 1/ 4 flare , valve angle type 1/ 4 ntp(m) x 1/ 4 flare , catch all filter drier filter drier c-032f , thermostatic expansion valve danfoss teat 85-33 , thermostatic exp. valve gfe-1.1/2jc charge 1/ 4 x 1/ 2 flare , thermostatic expansion valve gfe-1zp charge 1/ 4 x 1/ 2 flar , synthetic ref oil savsyn2068 , teflon seat washer 5-1/ 8 , bearing front (nu216) , temperature switch danfoss rt 101 25 to 90 deg c , temperature switch danfoss rt7 -25 to 15 deg c , vibration eliminator 5/8 ods , vibration eliminator 7/8 ods , vibration eliminator 1-1/8 ods , shock mounts , shock mount irmra akcc-400e , impeller , impeller part no.120 for celv 80-160 , shaft sleeve partno.1200 for celv 65-250 , cap nut part no.1820 for celv 65-250 , shaft sleeve part no.1200 for celv 80-160 , mech seal part no.1220 for celv 65-250 , cap nut part no. 1820 for celv 80-160 , impeller key part no. 1860 for celv 65-250 , roller brg part no.2250 for celv 65-250 , roller brg part no.2250 for celv 80-160 , pump shaft part no.2200 for celv 80-160 , pump shaft part no.2200 for celv 65-250 , ang contact ball brg part no. 2260 for cevl 80-160 , bearing rear (nup 216) , motor 45 kw 1600 rpm dc 180-320 v b3 , motor 160kw 2p ip56 sq cage induction 380v 50hz ci h b3 , coil for pilot operated solenoid valve 180s. , temperature gauge 100 dial -30 to 50 deg c , magnetic level switch for 144 tr ac plant for p 15a class , magnetic level gauge-switch for 144 tr ac plant , timer eapl/ge etm 0010046 2nc , power contractor ge 032a 380a 380v ac 3 pole , integrated gate bipolar transistor mitsubishi 300a , 600v , terminal connectors with din rail 35 wago 6 sq mm 282-101 , resistance elmot 5 k ohm 10 w , diode meltron / eqv 16 fmr 120 , o ring , element complete with o ring , seal oil , bearing spherical roller(skf 24026cc/c3w33) , pump trailing (pompe pollard) type 100 pr.60.100 c.g.n. , bearing set non driving end no.nup216ecp , cathode protector , core for filter drier sporian rc10098 , core for filter drier sporian rc 10098 , thermostatic exp. valve gfe-1/2jc charge 1/ 4 x 1/ 2 flare , pilot operated solenoid valve sporlan 180s with24v dc coil , compressor model dkm-75-ewl , annual inspection kit part no. kx204-3d , overall kit part no.kx204 , rotor setl/d 1.45 part no. n0900408030 , set connecting rod part no. 08307 , set oilsump heat 80w 220-240v part no.08425 , set capacity regulator 24 v dc

CTN :40385477

05 Jun, 2025 NA

Kanchrapara - West Bengal

Tender For supply of high frequency induction heater, capacity 40 kw with flexible induction coil for dismounting of inner racer bearing as per specification [ warranty period: 30 months after the date of delivery ]

corporations/Associations/Others

CTN :40031415

26 May, 2025 1.50 Crore

Delhi - Delhi

Tender For corrigendum : supply of physiology equipment - electrical kymograph , myograph stand , du bios induction coil , simple key , short circulating key , pohls commutator , vibrating interrupter , new nerve muscle chamber , muscle lever , muscle grip , hook and weight , heart lever , frog board , frog board cork , low voltage unit , electromagnetic time marker , tuning fork , electrodes , x-blocks , marey tambour , demonstration eye pieces , double demonstration eyepiece , stage incubator , westergens pipettes with stand for esr , wintrobe pipette for esr , perimeter priestley , haemoglobinometer sahlis , haemocytometers , stethoscopes , polygraph , venus pressure apparatus , spirometer , gas analyser automatic , van slykos apparatus , douglas bag , benedict roth recording spirometer , mosso ergograph , compass aesthesiometer , clinical thermometer , thermanaesthesiometer , algometer , apparatus for passive movement , knee hammer , pneumograph , bicycle ergometer , olfactometer , ophthalmoscope , schematic eye , phagoscope , perimeter , colour perception lantern , maddox rod , newtons colour disc , tuning forks , grip dynamometer , sterilizer electric , instruments trolley , stop watch , physiograph , student physiograph , centrifuge high speed , colorimeter , ph meter , oxygen cylinder , co2 cylinder , electronic stimulator , water distillation steel , all glass distillation , voltage stabilizer , thermometers , balances , glass slides , charts , models , amphibian lab , ecg machine , snellens drum , ishihara charts , jaegers chart , staining racks , porcelain blood grouping , capillary glass tubes , watch glasses , lancets , von freys hair aesthesiometer , metronome

CTN :40338190

05 Jun, 2025 NA

Jabalpur - Madhya Pradesh

Tender For tender for the supply of equipments of various trades for govt. industrial training institutes of madhya pradesh - 3- point d.c. starter, 4- point d.c. starter, a.c. ceiling fan 68-watt, 230 v, ac table fan 68-watt, 230 v, ac energy meter (single phase, 10 a, 240 v induction type), ac energy meter (three phase, 15 a, 440 v induction type), a.c. voltmeter m.i. analog, portable box type housed in bakelite case, ammeter (ac 0 - 1 a), ammeter (ac 0 - 25 a), ammeter (ac 0 - 5 a), ac starters (3 phase), ammeter (ac 0 - 500 ma), ammeter mc analog, portable box type housed in bakelite case 0-5 a, ammeter mc analog, portable box type housed in bakelite case 0-25 a, battery charger 0 - 6 - 9 - 12 - 24 - 48 v, 30amp, brake test arrangement with two spring balance rating 0 to 25 kg, bus bar with brackets, cables, capacitors- electrolytic ceramic polyester film variable dual run, current transformer 415 v, 50hz, ct ratio 25 / 5 a, 5va, dc power supply 0 - 30 v, 5adc regulated power supply, digital ic trainer, digitalmultimeter, digital wattmeter, discrete component trainer, earth electrode, earth plate 60cm x 60cm x 3.15mm -copper plate, 60cm x 60cm x 6mm -gi, plate, earth leakage circuit breaker (elcb ) and residual current circuit breaker, (rccb), electric induction plate 1500 watt, 240v, electric iron automatic - 750 w, 240 v, electric kettle 1500 watts, 240v, function generator, fuses hrc glass, rewire type (assorted type), geyser (storage type) 10 litre, growler (single phase, adjustable jaws, testing armature with ampere meter, and testing probes), immersion heater 1500 watt, 240v, inverter with battery 1 kva with 12 v battery input-12 volt dc, output-220, volt ac, kilo wattmeter (analog), knife switch dpdt fitted with fuse terminals 16 amp ,440v, knife switch tpdt fitted with fuse terminals 16 amp, 440 v, laboratory type induction coil (1000 w), linear i.c. trainer, load bank (lamp/heater type) 6 kw, 3phase, lux meter, magnetic flux meter-(0 - 500 tesla), molded case circuit breaker (mccb )- triple pole, 440v, 100amps, megger (digital - 1000 v) - analog type insulation tester (megger), milli voltmeter-(center zero analog) 100 0 100 mv, miniature circuit breaker 16amps (mcb/ tpn)., mixture & grinder with all accessories and attachments 750 w, 240 v, motor pump set (1 hp, 1 phase, 240 v), ohm meter; series type, portable box type analog, ohm meter; shunt type, portable box type analog, oil testing kit: -, oscilloscope dual trace 20 mhz, out side micrometer (manual) 0 - 25 mm least count- 0.01mm, phase sequence indicator (digital) 3 phase, 415 v, plug socket piano switch lamp holder 230 v, 5 a

Central Government/Public Sector

CTN :40329867

26 May, 2025 NA

Chennai - Tamil Nadu

Tender For supply of 3 phase squirrel cage induction motor, 10hp @ 415v ac, frame 132m along with e lectromagnetic brake having coil voltage 190v dc with mechanical lever as per the specifications enclosed . [ warranty period: 30 months after the date of delivery ]

Hr Coil Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector