Latest ht bushing Tenders | Government ht bushing Tenders

CTN :45574728

23 Jun, 2026 NA

Poonch - Jammu And Kashmir

Tender For annual fixing of rates for supply of workshop material as per rec/is/pdd approved standard and rec drawings, in the jurisdiction of electric division(jpdcl) poonch for the financial year 2026-27 (all the items should be as per latest specifications and drawing adopted/approved by department) - items, se. aluminum winding wire (round) in sizes 12 to 21 swg, dpc aluminum winding wire (round) in sizes from 12 to 21 swg., dpc aluminum strip of sizes for lv winding of distribution transformers 25kva to 250kva, se. aluminum winding wire (round) in sizes 12 to 21 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum winding wire (round) in sizes from 12 to 20 swg.(in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc aluminum strip of sizes for lv winding of dist. transformers 25kva to 250kva.( in exchange of one kg of scrap including insulation coverage i.e. salvaged conductor), se copper winding wire (round) in sizes 11 to 22 swg., dpc copper winding wire (round) in sizes 11 to 22 swg., dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva., se copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor), dpc copper winding wire (round) in sizes 11 to 22 swg.( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), dpc copper strip of sizes for lv winding of distribution transformers 25kva to 250kva. ( in exchange of one kg of scrap including insulation coverage ie salvaged conductor ), lv. brass bush rods 12 mm, lv. brass bush rods 20.mm, lv. brass bush rods 25.mm, lv. brass bush rods 30mm, hv. brass bush rods 12 mm, buy back of scrap/old brass bush rods, cork washer for lt bushings big / small, cork washer for ht bushings big / small, lt rubber washers (small m12 & m20) (large m12 & m20), ht rubber washers, ms washers for lt, gutka for ht bush, hv bushing (11kv) 12mm, lv bushing 12mm, lv bushing 20mm, lv bushing 25mm, cotton tape 1 (size), length 25 mtr, nawar tape 1 (size), old cotton sari / cloth, rubberized cork sheet 4mm thick, rubberized cork sheet 5mm thick, cork strip 5mm thick, lethoride paper, electrical grade kraft paper, packing sheet 1 mm, packing sheet 1.5 mm, varnish dr. beck, m seal, fevicol, glass wool sleeves of sizes, backlite tubes, inch inch(i mtr length), packing gutties, manual operated oil pump, transformer oilas per the specifiction of is-335 amended from time to time, ms nuts andd bolts full thread size 1/2 in to 3 in, ms plug and caps 1/2", 3/4", 1", 1.1/4", 1.1/2"confirming to relevant is code amended upto date, film paper 7milsconfirming to relevant is code amended upto date

CTN :45541202

23 Jun, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of tanche - lab equipments for eee and ece department - purchase - lab equipments for eee department electronics lab, single phase to single phase cyclo converter kit single-phase bridge cycloconverter power devices: scr/triac based input supply: 230 v ac, 50 hz step-down isolation transformer 230 v / 12 v output: 12 15 v ac, frequency: 0 25 hz (adjustable),firing angle control circuit and frequency control circuit to be provided built-in resistive load, terminals to be brought on ms panel with necessary symbols and circuits, pwm based step down dc chopper using mosfet/igbt kitpwm based step-down dc chopper (buck converter) power device : power mosfet / igbt based switching circuit input supply : 24 v dc to 110 v dc or derived from 230 v ac mains through rectifier unit output voltage :(0 to vin) variable dc output current : up to 5 a dc maximum with suitable load resistor (r load) pwm duty cycle control provided pwm generation and control circuit inbuilt gate driver circuit provided, single phase single pulse / sinusoidal pwm inverter using mosfet/igbt kittype : single phase pwm inverter trainer power device : mosfet / igbt based inverter circuit input supply : 12 24 v dc output voltage : 30 v rms ac output phase : single phase output frequency : 0 50 hz variable output power : 100 w single pulse pwm operation sinusoidal pwm (spwm) operation variable frequency control pwm generation and firing control circuit inbuilt gate driver circuit provided test points provided for waveform observation and analysis built-in resistive load provision, on / off control of lamp using solid state relay kittype : solid state relay (ssr) trainer kit control/input voltage : 12 v / 24 v dc or up to 30 v dc output load voltage : 230 v ac, single phase load control : on/off control of ac lamp load solid state relay based switching circuit opto-isolated input control built-in ac lamp load manual on/off switching arrangement led indication for input and output status, speed control of ac motor using vfd drive module with ac motortype : variable frequency drive (vfd) module input supply : 415 v ac, three phase, 50 hz output : three phase variable voltage and variable frequency ac output 1 hpthree phase squirrel cage induction motor415 v ac 50 hz &1440 rpm control technique : pwm / spwm based control frequency range : 0 50 hz variable digital display for frequency and operating parameters start / stop and forward / reverse control, acceleration and deceleration control facility powder coated ms control panel tabletop / floor mounted laboratory type setup clearly labelled circuit diagram and control switches proper insulated terminals and earthing arrangement, purchase - lab equipments for eee department electrical machines lab, three phase transformertype: three phase transformer, rating: 3 kva input voltage: 415 v ac, 3-phase, output voltage: 230 v ac, 3-phase frequency: 50 hz winding material: copper wound insulation class: class b or higher duty: continuous duty suitable for laboratory usebench/floor, dc stepper motor drive kit with stepper motorinput supply : 230 v ac, 50 hz stepper motor : permanent magnet / hybrid type with suitable driver circuits. motor operating voltage : 12 24 v dc variable speed control forward and reverse direction control full step and half step operation manual / automatic pulse generation facility built-in regulated dc power supply led indication for phase sequence and status test points provided for waveform observation start / stop control switches to be provided overload and short circuit protection to be provided mounted on compact powder coated cabinet with printed circuit diagram proper insulated terminals and interconnecting leads to be provided patch chords for interconnection., dc servo motor drive kit with servo motorinput supply : 230 v ac, 50 hz servo motor type : dc servo motor with feedback arrangement motor operating voltage : 12 24 v dc controller type : microcontroller based servo drive contr

Central Government/Public Sector

CTN :45557261

20 Jun, 2026 NA

Lucknow - Uttar Pradesh

Tender For supply, fitment, installation, commissioning and testing of electrical variable voltage variable frequency ac drive rating-15kw/11kw, 3-phase 380-480 vac 50/60 hz, dc power supply: 510-680 vdc (cimr- ad4a0031fma).nominal input current (nd):24 amp. nominal input current (hd): 31 amp. output power rating (nd):15kw.output power rating (hd):11kw.frequency control range: 0-400hz.motor power-15kw/11kw.emc filter class c2 integrated. braking of standstill by dc injection. salient features: operation mode selection ,dc injection braking and short circuit braking ,speed search ,delay timer, pid control ,dwellfunction ,energy saving, acceleration and deceleration times ,slip compensation, torque compensation ,carrier frequency, frequency upper/lower limit torque control ,jump frequency. main control functions: torque control , drop control speed/torque control switch, feed forward control, zero servo control, momentary power,loss ride- thru and speed search, over torque detection, torque limit. speed control range : v/f control 1:40, open loop vector control 1:200, open loop vector control for pm 1:20, closed loop vector control for pm 1:1500, v/f control with pg 1:40 ,closed loop vector control 1:1500, advanced open loop vector control for pm 1:100. output overload tolerance: nd rating: 120% of rated output current for 60s, hd rating: 150% of rated output current for 60 s (derating may be required for repetitive loads).protection design: ip00 open-chassis, ul type 1 enclosure. ambient temperature (open-chassis): 10 to +50 degree celsius. standard compliance: ul508c iec/en61800 iec/en61800-5-1 ,two safe disable inputs and 1edm output according to iso/en13849-1 cat.3 pld iec/en61508 sil2. make: yaskawa /schnieder /abb/siemens/mitshubishi/angel or similar. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45459805

15 Jun, 2026 NA

Bhaderwah - Jammu And Kashmir

Tender For fixing of rates for supply of workshop material for the fy 2026 27 - super enamel aluminium wire (13 to 22 swg) with scrap , super enamel aluminium wire (13 to 22 swg) with out scrap, , dpc aluminium wire (13 to 22 swg) with scrap, , dpc aluminium wire (13 to 22 swg) with out scrap, , super enamel copper wire (13 to22 swg) with scrap, , super enamel copper wire (13 to22 swg) with out scrap, , dpc copper wire (13 to 22 swg) with scrap, , dpc copper wire (13 to 22 swg) with out scrap, , lt bush rods (m-12), , lt bush rods (m-20), , lt bush rods (m-30), , ht bush rods, , lv bushing (12 mm), , lv bushing (20mm), , lv bushing (32/30 mm), , ht bushing, , butter paper (2 to 3 mil), , lethroide paper (2 to 6 mm), , press boards (5 to 10 mm), , gutties, , rubber washers of sizes, , ltiht washers, , cork sheet (3,5 & 8 mm), , bakelite tubes, , cotton tape, , bovin tape, , insulating varnish, , m.seal, , fevicol, , glass sleeves, , packing sheet, , craft paper, , gum shoes, , aluminium strip of sizes, , pg clamps for 25 kva to 250 kva, , oil seals, , cork sheet, , old sarees, , nut & bolts 2" (16 & 18 no), , bush clamp ht, , cork washers of sizes, , pallet trolley 2.5 mt capacity, , oil testing machine (automatic motorised), , multimeter (waco make), , meggar 2500 mega ohm (waco make), , meggar 5000 mega ohm (waco make), , turn ratin meter (conforming isi standardel

State Government

CTN :45464811

19 Jun, 2026 NA

Petlad - Gujarat

Tender For tender of transformer ht bushing boot for all s/dn under petlad (o&m) division

Central Government/Public Sector

CTN :45453746

12 Jun, 2026 NA

Ajmer - Rajasthan

Tender For supply of set of metal oxide gapless lightning arrestors (02 nos.) for 25 kv ac as per clause no. 4.4 of rdso specification no. rdso/pe/spec/emu/0196-2024 rev.1 (one set per basic unit) suitable for vande bharat/t-18 rake version 2.0. accepted make: m/s medha servo drive private limited -hyderabad only. firm accepted description: set of surge arresters i.e., 1) surge arrester, class-4, 40kv part no. sp675uv2101001 - qty. 01 no, 2) surge arrester, class-3, 42kv, 10ka, part no. sp675uv2101002 - qty. 01 no. [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45441611

07 Jun, 2026 NA

Bhusawal - Maharashtra

Tender For work contract for internal inspection, cleaning and preventive maintenance of 21 kv, 11 kv & 6.6 kv bus ducts and ht bushings of generator, gt, uat & st during aoh of unit no.5at 2x500mw btps

corporations/Associations/Others

CTN :45327896

09 Jun, 2026 1.95 Lacs

Saharanpur - Uttar Pradesh

Tender For corrigendum : replacing all the packing of the converter and seals of lt and ht bushing and to replenish the oil quantity of the converter and to re-install the earthing system of the converter in the area of edd deoband

corporations/Associations/Others

CTN :45448740

20 Jun, 2026 5.76 Lacs

Mau - Uttar Pradesh

Tender For supply of lt studs 100 tf , lt studs 250 tf , lt studs 400 tf , lt studs 630 tf , lt studs 1000 tf , silica gel , oil packing seal kit , lt aluminium lug 50 mm , lt aluminium lug 70 mm , lt aluminium lug 120 mm , lt aluminium lug 400 mm , connector 95 sqmm , connector 120 sqmm , ht bushing 100 tf , ht bushing 250 tf , ht bushing 400 tf , ht bushing 630 tf , ht bushing rod 100 kva , ht bushing rod 250 kva , ht bushing rod 630 , parcelain lt bushing 250 kva , parcelain lt bushing 400 kva , parcelain lt bushing 630 kva , nut bolt

Central Government/Public Sector

CTN :45438751

06 Jun, 2026 NA

Erode - Tamil Nadu

Tender For supply of servo syngear 460 rr of m/s.ioc or parthan rr 460 of m/s hpcl or balmerol syntrac 460ee of m/s balmer lawrie for ac traction motor drive end/pinion end bearing oil/gear case oil of wap7 locomotives as per amendment no. 04 to technical circular no. rdso/2013/el/tc/0034 (rev-04) dated: 21.07.2008 [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Ht Bushing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government/Public Sector

State Government

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector