Latest ht line laying Tenders | Government ht line laying Tenders

Central Government/Public Sector

CTN :45365796

27 Jun, 2026 11.50 Lacs

Jammu - Jammu And Kashmir

Tender For repair resurfacing of certain roads and connected items at bd bari mil stn - m&l preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with wire brush/brooms and finally fanning the cleaned surface with gunny bags or by mechanical blower to remove all loose dirt etc to black top surfaces, and applying evenly a priming/tack (viscosity grade paving bitumen of grade vg-10) @ 5 kg per 10 sqm to road surface bituminous asphaltic semi dense concrete consolidated thickness 30 mm with stone chippings graded aggregate with 5.5% of binder content by weight of total mix, (viscosity grade paving bitumen of grade vg-30) and 4% stone dust conforming to required specification for filler as per irc-95, 1987 (filler) by weight of mix, prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and rolled with 8 to 10 tone power roller completed all as specified and as directed., m&l for repair to potholes, any depth ,not exceeding 1 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, path etc, cutting around edges to at least 25mm in depth, making good by filling in screened and graded road metal, watering and well ramming, applying tack coat with (viscosity grade paving bitumen of grade vg-10) @ 10.0 kg per 10 sqm of surface putting in & including premixed bituminous macadam, well rammed and sealed with binder 9.80 kg/sqm, blinded with 0.09 cum of stone chippings, 6.3mm size and again well rammed, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller (including supply of premixed macadam, binder and chippings),completed all as specified and as directed., premix bituminous macadam laid / rolled and compacted using 8 to 12 tonne power roller to required gradient and camber, with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade vg-30 grade by weight of toal mix (consolidated thickness 75mm or less) completed all as specified and as directed., m&l providing and laying at or near ground level factory made kerb stone of m-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required completed all as specified and as directed., m&l for marking lines 2.5 mm thick, dashes arrows etc of any description n. exc 10cm width/girth on road surface using hot applied thermo plastic road marking paint of approved colour confirming to bs-3262-1989 with special applicator machine all as per manufacturere instruction completed all as specified and as directed., supply and fix solar cat eye (green/red) aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency mono rystafie solar panel 2.4v/ 0.3 watt one ni-ed rechargeable battery (1.2v/ 1600ma) consisting of super bright led with 10,000 to 18,000 mcd completed as per manufactures instructions etc completed all as specified and as directed., supply and fixing metal tubular dealineator made out of abs round body fitted with 2 nos 65 mm dia highly reflective reflectors made out of and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in pcc 1:2:4 (150x150x300mm) type b1 complete all as specified and directed, s&f manufacturing, supplying and fixing retro reflective mandatory/ regulatory sign boards of 900 mm diametre with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered wi

Central Government/Public Sector

CTN :45374633

08 Jun, 2026 3.47 Lacs

Medak-T - Telangana

Tender For man power supply for tree branch cutting across electrical lines in township

Central Government / Public Sector

CTN :45374516

16 Jun, 2026 NA

Krishna - Andhra Pradesh

Tender For auction sale of others - flt material : between kondapalli and krishna canal ; pl no:98050047( hsn code-72042910)-cond and u/s ms scrap of flt( flood light towers-25 nos, in staging condition) of different spans ( 1x22.86-18 nos, 1x15-07nos). consisting of main angles of sizes-110x110x10, 90x90x6, 50x50x5, bracing angles of sizes-45x45x5, 40x40x5, bottem base brasing angles(110x110x10 & 130x130x10) , top platform bottom support angles(50x50x5), plat form horizontal angles (50x50x5), plateform vertical angles ( 50x50x5), top horizontal angles(50x50x5), top plate(10 mm thick),plate form plate 6mm thick, ladder 50x10, flat, ladder rods, main angles joining angles inside 90x90x6, out side joint plate connecting main angles, intermediate horizontal anghes 45x45x5, top gusset plate 25mm thick, trapezoidal etc. all the flt material of the lot qty-49.91 mt ( approx). available at wagon depot ( opp 12t crane shed), through yard(km no; ty/139-ty/144, ty/111-ty/106, ty/96-ty/92, ty/234-ty/230), west central cabin( ty/14-ty/11), near ipf up/yd office( near dy/1048), in side dls,( near dls/1028), near f-cabin( dy/112a-dy/109), area control office,( dy/1035-1039), pf no-10(dy/1004-1003), at ryps,( 574/13-574/16), ki hut 1&2( 569/c10-c9, 568/c14-11), els pit , els @km( ls/22-ls/15, ls/74-ls/98), kcc station yard( 423/28-26, 423/32-34), scrap depo/ryp, opposite to old c- substation, k i-end old weighting bridge, main electrial sub station( back side), beside a-substation, opposite to stripping shop, beside btc pump house, back side of 03 ward, back side of cpoh /depo, opp paint shop). near air compresser room, under control of sse/br-ii/bza. cutting/dismantling is permitted for loading perpose. note- extreme saftey precations should be taken during cutting/dismantle the flts without any obstructing to the ohe and traks, while cutting the all flts safty measures should be followed, cut parts should be shifted approx 50-70 meters near to road side which are away from ohe lines. note: if any damage occur to rly while entire processes firm is the responsible for that damage. diismantling is permitted in power blocks, and traffic block only. delivery on actual weight basis only. all weights are obtained by the certified ds-8 by the custodian, ds no:0244660001. dt.18.05.2026. note: 2) cutting permited up to ground level only. purchaser shall prepare a dismantling action plan along with abundant safty precautions and same to be apporved by custodian before start of any dismantling . partial delivery may be permitted subject to full bsv payment of the complete lot. it will be the responsibility of custodian sse/br-ii/bza to facilitate required power & traffic block to complete the delivery of lot smoothly.for easy loading and tranpotation purpose, only after ensuring sufficient safty measures againt fire hazards etc to avoid any mishap to any mishap to any person, railway material etc.

corporations/Associations/Others

CTN :45360756

05 Jun, 2026 8.40 Lacs

Meerut - Uttar Pradesh

Tender For etno-17/edc-1/mt/2026-27-within the jurisdiction of the electricity distribution division-i, meerut—specifically under the purview of the sub-divisional officer, electricity distribution sub-division-i, bagpat road—the scope of work encompasses various tasks undertaken for safety considerations beneath the 33/11 kv mohiuddinpur power substation. these tasks include the replacement of dilapidated poles and wires; the relocation of double-pole structures; the installation of fencing around transformers; the construction of plinths for transformers; the erection of new 11 kv lines; the application of 11 kv jointing kits; the dismantling of low tension (lt) and high tension (ht) lines; and the overall strengthening of lt and ht distribution networks, among other related activities.

corporations/Associations/Others

CTN :45360760

05 Jun, 2026 8.40 Lacs

Meerut - Uttar Pradesh

Tender For etno-16/edc-1/mt/2026-27-within the jurisdiction of the electricity distribution division—pallavpuram, meerut, and specifically within the operational areas of the sub-divisional officers of electricity distribution sub-divisions i (pallavpuram), ii (maliyana), and iii (bhola), the scope of work encompasses tasks such as the guarding, earthing, and re-sagging of power lines situated along the kanwad route; the installation of plastic sheeting up to a height of 7 feet on stp/pcc poles; and the erection of signage boards and barricades around transformers, among other related activities.

State Government

CTN :45086470

01 Jun, 2026 9.00 Lacs

Banda - Uttar Pradesh

Tender For bid to ras providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - within the jurisdiction of the electricity distribution division, atarra—under the 'natural calamity / o&m' head for the year 2026-27—work pertaining to the reconstruction and repair of lines and poles damaged due to past or impending natural calamities (such as storms, heavy rains, or cyclones) affecting lines emanating from various 33/11 kv power substations.

State Government

CTN :45373665

15 Jun, 2026 NA

Jhansi - Uttar Pradesh

Tender For providing of custom bid for services - for the work of maintenance and repair to maintain uninterrupted power supply in case of sudden damage or breakdown of electric lines and poles under executive engineer 11 kv and lt mlph jhansi t9

State Government

CTN :45377812

22 Jun, 2026 NA

Multi City - Multi State

Tender For supply of prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead powe

State Government

CTN :45377817

22 Jun, 2026 NA

Multi City - Multi State

Tender For supply of prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead power traction and telecommunication lines as per is 1678,prestressed concrete poles for overhead powe

CTN :45365476

13 Jun, 2026 NA

Tuticorin - Tamil Nadu

Tender For purchase of lab equipments for ece dept - purchase of lab equipments for ece dept, dc voltmeter (digital) (item code : c006) 1.dcvoltmeteranalog moving coil -(0-10)v, class1.0( 1%full- scale)accuracy - 5 nos2.dcvoltmeteranalog- movingcoil-(0-30)v, class1.0( 1%full-scale)accuracy - 4nos, dc ammeter(item code : c007)specifications: 1. dcammeteranalog movingcoil- (0-30)ma,. 5 nos2. dcammeteranalog -movingcoil -(0-1000) a, class 1.0 ( 1 % full-scale) accuracy - 5 nos, decade capacitance box(item code : c0011)specifications: range: 100 pf to 100 f rotary switch selection with 6 dials. maximum voltage: 350 v. accuracy: 1%., decade inductance box(item code : c0012specifications: range:10 hto10h. rotaryswitchselectionwith6dials. low-lossinductors. accuracy: 1%., 8051 microcontroller kit(item code : c0013)specifications: operating voltage: +5 v dc. flash memory: 4 kb (at89c51) / 8 kb (at89s52). ram: 128 bytes internal ram. 16 2 alphanumeric lcd display. push buttons / tactile switches. dip switches for digital input. inbuilt adc interface: ldr, potentiometer. inbuilt dac interface. inbuilt stepper motor driver with stepper motor. inbuilt dc motor driver with dc motor. 1 4 led array, 1 4 keypad, 1 relay. 1 buzzer, 16 2 lcd display, 1 pwm driver. 1 hardware interrupt key, inbuilt rtc. inbuilt eeprom and uart module. 4 7-segment display. supports both assembly and c language programming. pc interfaceable., embedded trainer kit (using lpc2148) (item code : c0014)specifications: cpu - lpc2148, core - 16/32 bit arm7tdmi-s speed - max 60 mhz, flash - 512kb, ram (on chip) 40kb, 46 general purpose i/opins, usb2.0 one 10bit a/d converter with 14 analog inputs, one 10bit d/a converter, six pwm & watchdog two uarts (16c550), two i2c (400kb/s), two spi eight bit digital output, eight bit digital input,16x2 characters lcd and 4x4 matrixkeypad one potentiometer for giving analog input, relay & buzzer interface i2c devices: rtc, eeprom and seven segment display, on board stepper motordriver lm35 temperature sensor, one rs 232 lines are terminated at 9 pin d type connector and usb interface board has inbuilt power supply and mounted in sturdy cabinet accessories usb cable with utility software to download programs from pc to target board power cord, user manual, temperature measurement kit (item code : c0019)specifications: sensors: rtd (pt-100), thermocouple (fe-k/j-type), and/or thermistor (ntc). display: 3 digit led/lcd digital display (typically 200 mv fsd). temperature source: portable water kettle or heater block. signal conditioning: on-board circuitry for amplification, linearization, and cold junction compensation. test points: multiple 2 mm / 4 mm banana sockets for monitoring input/output signals. power supply: 230 v ac, 50 hz, single-phase. accessories: glass thermometer, 10 k ntc thermistor probe, k-type thermocouple probe, patch cords and user manual., fpga trainer kit(item code : c0025)specifications: must use industry-standard mid-range fpga device usb-jtag programmable, compatible with vivado ise (webpack). power supply: 5 v dc through usb or external adapter. on-board peripherals: leds, switches, push buttons, 7-segment display,clock source, gpio / pmod expansion ports, uart, vga / hdmi, usb uart bridge, usb cable. user manual.

Ht Line Laying Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors