Latest ht power cable Tenders | Government ht power cable Tenders

corporations/Associations/Others

CTN :45608480

24 Jun, 2026 5.00 Lacs

Coimbatore - Tamil Nadu

Tender For providing street lights and play materials to bharathi nagar and rajan nagar footpath area in ward no 37of west zone. - supply and fixing of slider including cost of conveyance of all materials to work site etc., complete, supply and fixing of merry-go-round including cost of conveyance of all materials to work site etc., complete, supply and fixing of jungle jum including cost of conveyance of all materials to work site etc., complete, supply and fixing of twin seasaw including cost of conveyance of all materials to work site etc., complete, supply and fixing of swing seasaw including cost of conveyance of all materials to work site etc., complete, pedastal for street light pols :- earth exacavation of size:- 0.30m x 0.30m x0.75m and plain cement concrete 1:4:8 mix of size:-0.30m x 0.30m x 0.10m and plain cement concrete of size:-0.30m x 0.30m x 0.65m and mild steel hollow pipe, square rod, plate, nuts and bolt including cost all material and labour chagres and conveyaing all material to work site etc., complete, supply and frxing of brass cable gland for 3-1/2 x 50 sq.mm. pvc armoured ltug cable with earth connection, supply, of 7 meter length single bracket pole with base plater (250 x250x6 mm )114.3 od x5.40 mm thick x 400 mm length ,88.90 mmx4.85 mmtk x 1500 mm length ,76.10 mm od x 3.25 mm thick x 1500 mm length including fixing in position as per standards and standards of the departmental officers etc complete, supply and run of 2 of 4 sq.mm. pvc insulated sc unsheathed frls copper conductor of 1100v grade insuitable heavy gauge ms conduit pipe concealed with continuous earth wire connection by 4sq.mm copper wire and making good of the concealed portion wiith suitable colour, supplying and erecting led street light fitting 48w led street light fitting with led, supplying and erecting 63 a mcb suitable to fix in 1 each module of modular switch in provided box complete & duly concealed with necessary material and connected.for four pole 63 a ,10 k

corporations/Associations/Others

CTN :45608419

01 Jul, 2026 NA

Kolkata - West Bengal

Tender For supply, laying, testing and commissioning of 11 kv grade 300 sq. mm xlpe ht power cable for existing capacitor bank of pump unit no. 4 with other ancillary works at clear water pump house phase-ii, grww.

State Government

CTN :45606470

29 Jun, 2026 25.28 Lacs

Barnala - Punjab

Tender For annual rate of contract supply of hardware material for annual repair and maintenance for f/y 2026-27 supply of oxidised mild steel hasp and staples (safety type) 115 mm of approved quality., supply of oxidised mild steel screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 30 mm, d. 35 mm, e. 50 mm, f. 60 mm, g. 75 mm, supply of ss screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, c. 32 mm, supply of black screws (pkt. of 200 nos.) (netle f&d make or equivalent), a. 20 mm, b. 25 mm, supply of chipboard screws (pkt. of 200 nos.) (patta, omni make or equivalent), a. 3.5 x 20 mm , b. 3.5 x 25 mm, c. 3.5 x 32 mm, d. 3.5 x 38 mm, e. 3.5 x 50 mm, f. 3.5 x 60 mm, g. 3.5 x 75 mm, supply of oxidised mild steel sliding door bolt of approved quality. , a. 250 x16 mm, b. 300 x16 mm , supply of oxidised mild steel handles of approved quality., a. 100 mm, b. 125 mm, supply of anodised aluminium tower bolt (barrel type) of approved quality., a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, d. 250x10 mm, e. 300x10 mm, supply of aluminum sliding door bolt of approved quality., a. 250 x16 mm, b. 300 x16 mm, supply of oxidised mild steel tower bolt (barrel type), a. 100x10 mm, b. 150x10 mm, c. 200x10 mm, supply of anodised aluminum handles of approved quality., a. 75 mm, b. 100 mm, c. 125 mm , d. 150 mm, supply of plywood water proof (make green, duro, century, archidply, modiply & evergreen), a. 06 mm, b. 09 mm, c. 12 mm , d. 18 mm/19 mm, supply of marandi/red champ cut to size including grooving & finishing all respect (well seasoned), supply of second class teak wood cut to size including grooving & finishing all respect (well seasoned), supply of teak plywood (make internet maxima & sanik, green, national or equivalent), a. 04 mm, b. 06 mm, c. 12 mm , supply of marandi wood beading finishing all respect (well seasoned), a. 1/2" x 3/4" , b. 1.1/2" x 1/2", supply of sunmica sheet (8' x 4') as per sample or approved quality. (make green, duro, century, archidply, modiply & evergreen), a. 0.8 mm, b. 01 mm, supply of masking tape , supplying of panelled shutter for doors including isi marked black enamelled m.s. butt hinges with necessary screw, including panelling of 12 mm thick water proof ply. kiln seasoned and chemically treated hollock wood. 30 mm thick shutter. , supply of block board construction flush door with teak wood ply on both faces 30 mm thick of approved quality., supply of wire gauge shutters using galvanized m.s. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws 35mm thick shutters kilin seasoned and chemically treated hollock wood , supply of pvc door shutter as per is , specification of sintax, rajshiri or make or equivalent, supply of wood primer (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of water based exterior primer (nerolac, asian, burger, dulux or equivalent ), supply of red oxide primer (nerolac, asian, burger, dulux or equivalent), supply of synthetic enamel paint (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of terracotta paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of acrylic smooth exterior paint (nerolac, asian, burger, dulux or equivalent) of approved quality., supply of plastic emulsion paint (nerolac, dulux, asian, burger, dulux or equivalent make), supply of touch wood polish (nerolac, asian, burger, dulux or equivalent ) of approved quality., supply of turpentine oil of approved quality., supply of spirit of approved quality., supply of colure tube (100mm), supply of paint roller (size 10”), supply of thinner, supply of silicone, supply of siller, supply of putting patti of approved quality., supply of malmal/mulmul cloth of approved quality., supply of lime (as per approved sample), supply of indigo (neel) (as per app

CTN :45602493

29 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For supply of spanner adjustable 280mm , barrel carrying straps , uc 150 men set parat large , uc 4 m set lotah , brushes paints and varnishes flat 50mm , brushes writing medium , axes sg bit fl hd 2 kg with rd eye , wire steel mild annealed 4mm

CTN :45602481

29 Jun, 2026 NA

Imphal - Manipur

Tender For supply of h3 5530000207 plywood for general purposes bwr aa 5 pl , f6 nkord001 ac gas r134a , h4 8135000033 paper wrapping kraft 1189 mm x 100 mm , lv6 mt6 9330000105 sheet cellular 25mm thick 2m x 1m , h1 a 8010000128 thinner antichill , h2 8305000078 leather cloth black , g2 9525000018 wire brass soft 3 15 mm , h1 8010000192 paint rfu red signal , f6 6830000002 gases acetylene , g2 3439000088 rod welding iron cast super silicon 6 30 , f6 6830000001 compressed gas oxygen industrial , h9 5330001899 cork sheet thick 3 2 mm , g1 5315000656 nails steel wire round 40mm x 2 mm , g2 9510000028 steel bar carbon hot rolled round 32mm , h2 8305000064 cotton waste coloured , g1 5315000665 nails steel wire round 125 mm x 5 6 mm , g2 3439000015 electrodes welding steel mild general pu , h1 b 6810 000014 acid sulphuric pure , h1b 7930000002 polish wax , h2 8305000165 casd cloth hessain light 100 cm wide , g2 nkexp002 plain washer , h1b 5350000007 abrasive cloabrasive cloth emery or coru , h1b 6810 000033 casd sodium hydroxide tech * /bid number : gem/2026/b/7678611 + /dated: 17-06-2026 ' ' / bid document 1 / 27

CTN :45602482

29 Jun, 2026 NA

Imphal - Manipur

Tender For supply of g2 3439000105 rod welding hard facing 3 15mm , g2 9520000004 steel angles 30x30x3 mm , h7 ww 596 m seal , g2 3439000011 electrodes welding steel hard surfacing , g2 9510000018 steel bar carbon hot rolled round 6mm , g2 9525000068 wire copper soft for general purposes , h1 8010007488 750 paint rfu green , h9 nk0023200 steel pipe , g2 3439000016 electrodes welding steel mild general p , h4 8135000033 paper wrapping kraft 1189 mm x 100 mm , f6 6830000001 compressed gas oxygen industrial , f6 6830000002 gases acetylene , h3 ihc 0218 hard board 3 6x1 2x4 00mm , g1 5315000186 pins cotter split steel 5 5 mm x 63 mm , g2 9510000026 steel bar carbon hot rolled round 25mm , g2 9525 000068 wire copper soft for general purposes , h9 nk001757 iron pipe , g2 3439000015 electrodes welding steel mild general pu , h1 a 8010000248 paint rfu black , h2 8305000064 cotton waste coloured * /bid number : gem/2026/b/7678600 + /dated: 17-06-2026 ' ' / bid document 1 / 26

CTN :45602500

29 Jun, 2026 NA

Imphal - Manipur

Tender For supply of g2 9525 000018 wire brass soft 3 15 mm , h1 a 8010 000272 varnish gold size , g2 3439 000101 rod welding silicon bronze 1 60mm , g2 3459 000020 solder soft , h1 8010 007488 750 paint rfu green , h1 a 8010 000128 thinner antichill , g2 3439 000222 solder alluminium beedee , h2 8305 000131 cloth canvas cotton 410 g og wp 91cm , h4 8135 000033 paper wrapping kraft 1189 mm x 100 mm , lv6 mt6 9330 000107 sheet cellular 6mm thick 2m x 1m , g2 9530 00113 copper rod , g2 3439 000088 rod welding iron cast super silicon 6 30 , h9 5330 001899 cork sheet thick 3 2 mm , g2 3439 000105 rod welding hard facing 3 15 mm , g2 3439 000203 solder soft grade c , g2 3439 000097 rod welding copper 5 00 mm , g1 5315 000186 pins cotter split steel 5 5 mm x 63 mm , g2 3439 000018 electrodes welding steel mild general p , h3 ihc 0218 hard board 3 6x1 2x4 00 mm , h3 5530 400096 plywood for general purpose mr ab 5 ply , h2 8305 000082 leather cloth white * /bid number : gem/2026/b/7678529 + /dated: 17-06-2026 ' ' / bid document 1 / 25

CTN :45484377

22 Jun, 2026 NA

Ajmer - Rajasthan

Tender For corrigendum : supply of part no 8010 00051 paint rfu enamel ext syn br navey blue , part no 9520 000078 steel angle 25x25x6mm , part no 9530 000043 leaded brass rod round 50mm , part no 9535 000167 copper sheet 1250x60x1 point 60mm , part no 9535 000169 copper sheet 1250x630x2 point 80mm , part no 8305 000230 felt w rot and m proofed 13mm tk 132cm v5 , part no 5330 001897 cork sheet 1 point 6 mm thick , part no 9320 000066 rope asbestors white 25 point 5 mm , part no 5330 005411 jointing sheet 0 point 8 mm thicj 1 point 6mm , part no 5330 005609 gasket cover , part no 5340 009275 anti vibration mount resilent rubber , part no nd ixc mi 2443 203 001 hb suction delivery valve , part no nd ixc mi 34 020 03 0 sealing ring o ring , part no 3439 000167 flux welding aluminium 110 g container , part no 9505 000018 wire steel mild annealed 0point 56 mm * /bid number : gem/2026/b/7638910 + /dated: 09-06-2026 ' ' / bid document 1 / 15

CTN :45332868

22 Jun, 2026 NA

Sonitpur - Assam

Tender For corrigendum : supply of small store shelter sys room conduit pipe 15 mm dia , pvc round oblique square block , fire extinguisher of one kilogram capacity comma dry power type along with its accessories , earthing plate 600 x 600 x 6 mm galvanised steel suitable for gi strip fittings , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm comma 3 mm thick with ms frame , funnel fitted with 20 mm diameter gi pipe 1 point 5 m long pipe , gi wire 4 mm diameter for earthing , charcoal , salt normal , air termination single pointed aluminium rod 12 mm dia and 300 mm long , testing point terminal block make of gun metal and phosphorus bronze size 75 x 75 x 25 mm drilled and screwed , aluminium strips 25 x 3 point 00 mm , galvanised iron strip 32 x 6 mm , ci earth pit cover of size 300 x 300 x 6 mm with angle iron of size 20x20mm coma 3 mm thick with ms frame , insulating pvc block 75x75x30 mm with insulating clamp nut and bolt , study chair of size length 56 cm comma height 82 cm and width 56 cm , study table of size 4 feet x 2 feet comma wooden top on round tube structure with three drawers on one side , steel almirah of size 1855mm with 4 shelves ms sheet doors and and locker 1 point 00mm thick , mild steel rack adjustable comma sheet 1 point 00mm thick comma nuts and bolts are in hexagon blck steel , hand held trolley of size 1200 x 900 x 1200 mm of 2 mm thick ms platform , kassi with handle , black steel sr shovel spade belcha , plaster trowel with wooden handle , showel square nose 14 gauge blade size 310 x 245 mm , plumb bob iron , crow bar 1 point 5 inch dia 4 feet long , hammer 1 kg with wooden handle durmut , hammer 0 point 5 kg with wooden handle durmut , brick line 30 mtr nylon dhaga , traveler brick mason 4 inch 305mm , sprit level , measuring tape 30 mtr steel , water bucket steel 13 inch dia , picks axes with chisel and point ends kudali 14 cp nominal weight 3 point 0 kg , lime brush best quality , painting brush 100mm , hacksaw frame large with blade 05 nos , galvanised iron pan mortar tasla comma 18 gauge 20 inch dia , wooden waterproof plywood thickness 12mm , nails various sizes , rammer earth with handle minimum weight 5 kg without handle , tester for electrician with plastic handle 150mm , electric drill machine heavy duty 500 watt electrical backup with battery and charger , drill bits hss 5mm comma 8mm and 10mm dia for electric drill machine , electric tile cutting machine with interchangable blades 05 nos , electrical sheet cutter machine with blade , puf rivet machine , centre punch 8mm dia best quality , plumbing tool kit , water level pipe 30 mtr long

CTN :45606733

27 Jun, 2026 1.93 Lacs

Malda - West Bengal

Tender For procurement of materials and repairing of pump house, internal wiring at fatepur-i hdtw( ml no 238) mouza, jl no 35, plot no 634, fatepur-ii hdtw( ml no 3) jl no 35, plot no 78 under fatepur mouza, at old malda block, malda. - procurement of materials, c.i. sluice valve with hand wheel, 151marked,15:14846. ) 150 rnrn dia. (sor wrdd ch)13.00 rates of materials for the program 2021-2022 item no-18a) page- 3), 150 mm dia ms plate flange ( rate approved by se dated 14.05.2020), repairing of pump house, stripping off worn out plaster and raking out joints of walls, celings etc. up to any height and in any floor including removing rubbish and stacking anywhere within the compound as directed., dismantling all types of plain cement concrete works, stacking serviceable materials at site and removing rubbish as directed within a lead of 75 m in ground floor including roof. (a) up to 150 mm. thick, dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. a) in ground floor including roof, single brick flat soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand., cement concrete with graded stone ballast (40 mm size) excluding shuttering in ground floor. (a) pakur variety a) 1:3:6 proportion, hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood plank of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) (a) 25 mmto 30 mm thick wooden shuttering as per decision and direction of engineer-in charge., reinforcement for reinforced concrete work in the all sorts of structures including distribution bars, stirrups, binders etc. including supply of rods, initial strightening and removal of loose rust (if necessary), cutting requisite length, hooking and binding to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. (a) for works in foundation, basement and upto roof of ground floor /upto 4 m. ( i ) tor steel/mild steel. ii. jsw/jspl/shyam/srmb/ bmasl/elecrosteel/ssl, ordinary cement concrete (mix 1:1.5:3) with graded stone chips ( 20 mm down ) excluding shuttering and reinforcement. if any,in ground floor. as per is 456-2000. a) pakur variety (rate analysis), plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or roughening of concrete surface, including throating, nosing and drip course where necessary (ground floor)(b) with (1:4) cement mortar. (ii) 15 mm thick plaster, neat cement punning about 1.5 mm. thick in wall, dado, window, sills, floor, drain etc., artificial stone in floor, dado, staircase etc. with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners and including application of cement slurry before flooring works, using cement @ 1.75 kg/sq.m all complete including all materials and labour. in ground floor. 3 mm thick topping (high polishing grinding on this item is not permited) with ordinary cement. (iii) 25 mm thick, applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the eic. (in ground floor)applying interior grade acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive distemper/ acrylic emulsion paint

Ht Power Cable Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

State Government