Latest hurricane lantern Tenders | Government hurricane lantern Tenders

CTN :45591437

23 Jun, 2026 5.26 Lacs

Thumba - Kerala

Tender For replacement of fluorescent and defective light fittings in mlb, corridor, staircase in msb and ibm lab, citg at vrc.

Corporations And Associations And Others

CTN :45523194

19 Jun, 2026 4.67 Lacs

Delhi - Delhi

Tender For provision of led light fittings with accessories at various locations in ward no. 167 khanpur, under south zone. - supplying and drawing following sizes of frls pvc insulated copper conductor, single core cable in the existing surface/ recessed steel/ pvc conduit as required. 3 x 1.5 sq. mm, supply and fixing of 32mm dia x 1 meter long g.i. pipe (medium class) bracket for mounting of fluorescent/hpmv/hpsv street light fitting on pole including bending the pipe to the required shape , 2 nos 25mm x 6mm flat iron clamps with nuts, bolts and washer , painting the flat iron with primer and finish paint etc. as reqd., supply of xlpe insulated pvc sheathed al. conductor un-armoured cable 1.1kv grade conforming to is-7098 of following size:-2c*4 sqmm, laying of one number pvc insulated and pvc sheathed / xlpe power cable of 1.1 kv grade of following size in the existing masonry open duct as required. upto 35 sq. mm, led street light fixture, powder coated pressure die cast aluminum body (system lumen efficacy 135 lm/watt) supplying, installation, testing & commissioning of street light led fixture, powder coated pressure die cast aluminum body with built in or separate driver as per the requirement with driver efficiency >85%, input voltage: 140-270 volt ac, freq 50/60 hz, operating temp range -5 deg centigrade to 50 deg centigrade, internal surge protection of 5 kv l,n,e as per iec 61000-45, driver efficiency >85%,thd 10% as per iec 61000-3-2 , p. f. 0.95, ip66,ik-10, cri 70 , under voltage and over voltage protection,emi-emc as per cispr-15, lenses for beam angle as per iesna type i/ii/iii as per the width of the road and the project requirement., suitable to fit in up to 65mm dia pipe, life time (led,driver & electrical circuitry) of minimum 50000 burning hours with 70% of initial lumen maintained till life ends as per lm80 extrapolation ies tm-21-11 report , cct 3000 k / 4000 k / 5700 k /6500 k (as per ansi bin) , sdcm(standard deviation color matching) 5, maximum power consumption should not more than the specified rating and fixture shall be of relevant bis standard complete in all respect i/c external connections with 1.5 sq mm frls/hffr, pvc insulated copper conductor single core cable and earthing etc. as required with minimum 5 year oem warranty. system lumen efficacy 135 lm/watt output . lm79 & lm80 test report and all testing required for led fixtures as per bis shall be submitted. shape size and cct shall be as approved by engineer-in-charge as per requirement. (thermal management: heat sink of aluminum housing such that led junction temperature shall not rise above 90 c). 45 watt

CTN :45560655

08 Jul, 2026 NA

Kanchrapara - West Bengal

Tender For supply of fluorescent light single fittings with mesh guard for 25 kv ac bg emu coaches :icf drg. no. icf/std-7-6- 001 alt. d, col iii [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

Central Government And Public Sector

CTN :45246624

28 May, 2026 NA

Multi City - Bihar

Tender For auction sale of depot miscellaneousllaneous scrap - electrical parts & fittings scrap (comprising of ceiling fan 1200 mm and 1400 mm & spare blade with handle, invertors off sizes, battery charger, reading light, carriage fan with net & spare net, bldc fan 400 mm with net & spare net, dg exhaust fan, 2 mbps line terminal, outdoor fitting, led street light fittings, ms meter, exhauster fan, fluorescent light, earthling device, wall bracket fan, air circulating fan, emergency light fitting, solar plate, meter box, converter, switch board off size, led batten-1x18 watt, hrc fuse, carbon brush, aqua guard water, voltage stabilizer, air compressor, blower, room heater, power contractor, 9 watt tubular led lamp, night light fitting, change over switch, energy meter, control transformer- 100 & 200 volt, stand fan, fl fitting, electronic rectifier cum regulator unit, led t-8 batten, water geyser-10, 15 & 25 liters, main switch 300 ah, pcbs& led flood light-30, 70 & 200 watt fitting, compressor-5.5 tone, 1.0 tone, 1.5 tone & 2.0 tone, m.c.c.b 125 ан, 63 ah & miscellaneous electricals parts & fittings etc. qty. 13900.00 kgs.

CTN :45228381

25 May, 2026 1.66 Lacs

Midnapore - West Bengal

Tender For providing electrical wiring alongwith electrical accessories at conference room of chief engineer sw and office of junior engineer mechanical and electrical division midnapore. - supplying and fixing sheet steel main switches on flat iron frame on wall ,30/32 a, 240v dp with fuse on l&n, standard make., supplying and fixing double-door spn mcb distribution board with ip-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. 2+8 way (legrand), supplying and fixing 240/415 v mcb of breaking capacity 10ka & c characteristics on din rail of existing dbs and necessary connection, 6-32a sp legrand make, supplying and fixing 240/415 v mcb isolator ond in rail of existing dbs and necessary connection., 40a legrand make dp, wiring in 1.1 kv grade single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) of following sizes in 25mm pvc casing-capping (precision make) incl. necy. pvc clips, fittings etc., 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm), 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm), supplying & fixing gi modular switch board of the following sizes complete with top cover plate flushed in wall for housing the board after cutting the brick wall incl. making earthing attachment, painting and mending good damages to building works. i) 2 module, supply & fixing 240 v, 25 a, 3 pin modular type plug socket (brand approved by eic), without plug top and switch, on existing gi modular type switch board with top cover plate and making necy. connections with pvc cu wire and earth continuity wire etc., supply & fixing 240 v,25 a, 3 pin modular type plug top with indicator (brand approved by eic) & necy. connections., supply & fixing 240 v, 25 a, modular type starter (brand approved by eic) with 25a modular switch type dp mcb (ccurve) and 4 module gi modular type switch board with 4 module top cover plate flushed in wall incl. s&f switch board and cover plate and making necy. connec tions with pvc cu wire and earth continuity wire etc., distribution wiring in 1.1 kv grade 2x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire (brand approved by eic) in suitable size pvc casing-capping (precision make) with 1x22/0.3 (1.5 sqmm) single core stranded fr pvc insulated & unsheathed copper wire for ecc, incl. necy. pvc clips, fittings etc. to light/fan/call bell point with piano key type switch (anchor make) fixed on sheet steel fabricated switch board with perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [pvc casing-capping and switch board both on surface] average run 6 mtr., supply & fixing socket type fan regulator (step type) (brand approved by eic) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc., supplying of approved make wall fan oscillating type with base, blades,guard, speed regulator etc. ac 230- 250 volts. 400mm sweep, fixing only cabin fan on wall/ceiling by s&f rag bolts, nuts & washers (6 mm dia x 62 mm long) or as reqd. incl. s&f 24/0.20 pvc insulated flexible copper wire 0.5 mt. length, supply tmc501 conventional industrial batten philips ledtube, modelno : tmc 501 p 2xt-led 22w p3242 with 2nos mas ledtube 1200mm 18w865 t8 i 2100lm including necessary connection., fixing only fluorescent light fitting suspended 25 cm bellow the ceiling with 2 no. 20 mm dia ei conduit (14 swg) supports incl. s&f ei conduit, ball socket /socket type ceiling plate and connecting the length of pvc insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length., supplying of approved make exhaus

CTN :44967889

30 Apr, 2026 NA

Bokaro - Jharkhand

Tender For supply of 18w/2' murcury white fluorescent tube light, without electronic balast/fittings for use indriver cab lighting of three phase locomotives as per clw's spec. no.clw/es/3/0041(alt.a). make-philips, cyska, havels, surya or similar. [ warranty period: 30 months after the date of delivery ]

Central Government And Public Sector

CTN :44967944

25 Apr, 2026 NA

Bongaigaon - Assam

Tender For supply of fluorescent light fittings complete with all items conforming to icf drg. no.icf/std 7-6-018 alt "d" col - i. [ warranty period: 30 months after the date of delivery ]

Hurricane Lantern Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Corporations And Associations And Others

Central Government And Public Sector

Central Government And Public Sector