Latest hybrid geothermal system Tenders | Government hybrid geothermal system Tenders

corporations/Associations/Others

CTN :45632770

06 Jul, 2026 NA

Anpara - Uttar Pradesh

Tender For tender for supply of o-ring pit: 94 for boiler circulation pump dwg: up21343 back up ring pnr: 97 for boiler conculation panp dwg: up21343 o-ring pin: 93 for boder cuculation pump dwg up21343 o-ring back up ring p/n: 96 for boiler circulation pump dwg up21343 gasket pra: 87 for boiler circulation pump dwg: up21343 gasket pin: 62 for boiler circulation pump dwg up21343 guuket pin: 69 for boiler circulation pump dwg up21343 set screw in 12x65 (1 set 2 pcs) p/n: 23 for boiler circulation pump dwg: up21343 remarks: i unit is required total fi sets of set screws. set screw mkx20 pin: 55 for boiler circulation pump dwg: up21343 set screw m10x25 with conical spring washer por 51,36 for boiler circulation pump, dwy: up21343 remarkc maker will supply set screw with washer set. these set products are required to replace at same time set screw mlfa60 pin: 92 for boiler crculation pang. duy up21343 set screw miés65 pin: 83 for boiler cuculation pune dwg up21343 stud mifox75 with spring washer, and her, bd nut pin: 50,48 far hoder circulation pump. dwy up21343 remarks: maker will supply set serew with spring washer and nat set. these products are required to replace at the same tine stud mitis 108 with spring washer, and hex. hd nut pin: 72, 71, 70 for boiler circulation pump dwg up21343 remarks maker will supply set screw with spring washer and mit set. these products are required to replace at the same time. o-ring vortex type spiral wound pin 3241 for boiler circulation pump dwy: up21343 secure nag (2 pcs) pin 20 for hoiler circulation pump dwg: up21343 remarkos unit is required 2 pes of secure nag, so maker will supply as aset.

Central Government And Public Sector

CTN :45616505

29 Jun, 2026 NA

Bangalore - Karnataka

Tender For anti wear type hydraulic oil to grade vg-68 meeting the requirements of is:10522-1983 / reaffirmed 2019 with aniline point 90deg.c. min. in place of seal compatibility test and min pass load of 9th stage in fzg niemann test with rdso addinional requirement as slip no.1 issued by rdso for use in hydraulic and circulation system of cnc machines to the following basic characteristics. a) kinematic viscosity @40 deg.c - 61.2 to 74.8 cst b) viscosity index - 90 min. c)flash point, coc - 210 deg.c.min d) pour point - 0 deg.c.max . note: i) the oil shall confirm to vickers v -104c vane pump test,ipss1-09-002 specification, din 51524 (part-i) ii) mtc shall accompany the supply. preferred brand & makes:protomac h-68 of balmer lawrie & co ltd,mak hydrol-68 of bpcl,enklo-68 of hpcl,servo system -68 of ioc. ]

State Government

CTN :45217651

02 Jul, 2026 NA

Kheda - Gujarat

Tender For corrigendum : supply of various spares for swas system of boiler stage-i at wtps - evaporator phe ( plate type heat exchanger ) kaori model :95-20/ equivalent for water chiller of swas room of boiler stage-i & ii, sample cooler sc-4-12-ss with shell and coil., sample cooler sc-4-6-ss with shell and coil., sample cooler sc-6-12-ss with shell and coil., process pump for water chiller of swas room of boiler stage-i & ii, re-circulation pump for water chiller of swas room of boiler stage-i & ii, water cool condenser maxell 2tr for water chiller of swas room of boiler stage-i & ii, compressor -r22 -copeland make -model: cr30 k6m-tfm-111dm-(3 phase) for water chiller of swas room of boiler stage-i & ii, expansion valve danfoss tex-2 for water chiller of swas room of boiler stage-i & ii, accumulater drayall 3tr (3-6) for water chiller of swas room of boiler stage-i & ii

State Government

CTN :45596950

08 Jul, 2026 NA

Delhi - Delhi

Tender For supply of title1 , title2 , title3 , title4 , title5 , title6 , title7 , title8 , title9 , drinking water coolers (v4) isi marked to is 1475 (q2) , automatic line voltage correctors (step type) for domestic use (stabilizer) conforming to is 8448 (q2) srtc of 50lph ro with following specifications: 1) capacity: 50 lph suitable ro membrane for input tds 2) booster pumps: dual pump (copper winding) 3) input tds: minimum 4000 ppm 4) pre-filtration: 20 pp sediment filter activated carbon filter 5) post-treatment: * uv (8 11w) * tds controller / mineral cartridge ensures maintenance for daily users. 1 year warranty with trusted service comes with a comprehensive 1-year warranty backed reliable service network., supply & installation of extension board/switch board of 16 amp. 3 socket outlets with switch with incomer mcb for connection of ro and water cooler complete as required, supplying, installation, testing and commissioning of air cooled hi wall split type air conditioners complete with indoor unit(idu), outdoor unit (odu), surface / concealed copper refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 mtr (idu to odu), copper power cable upto 3.5 mtr (idu to odu) i/c drain pipe r-32/r-410/ r-407 green refrigerant, wireless remote control, suitable for working between 180- 260v with low & high voltage cutoff and 50 hz ,1 phase ac supply capable of performing cooling, dehumidification, air circulation of following capacity with scroll / rotary compressor. the system shall be able to deliver 100% of the rated capacity upto 42 0c. min 5 year original equipment manufacturer (oem) warranty both compressor and printed circuit board (pcb). must comply: * /bid number : gem/2026/b/7677973 + /dated: 17-06-2026 ' ' / bid document 1 / 18

Central Government/Public Sector

CTN :45555413

19 Jun, 2026 NA

Mumbai - Maharashtra

Tender For automatic water pressure booster pump along with all safety protection such as overload, short circuit, over current, etc; suitable for hot water circulation capacity 0.735 kw, 50 hz, single phase supply, insulation class b, ip-44 or better and discharge range up to 140 lpm confirming to is: 6595 part-1-2002 or latest. data sheet of oem shall be attached along with the offer. [ warranty period: 30 months after the date of delivery ] ]

CTN :45318277

13 Jun, 2026 50.00 Lacs

Godhra - Gujarat

Tender For bid to ras supply of cooling pad 2 feet x 4 feet with fitting , cooling pad frame alluminium 2 feet x 4 feet , water circulation pipe for pad frame , repairing fogger system with fogger and material , green net , insect net , gi profile with installation , zigzag spring with installation 8 mm , fogger with lpd with installation , uv stabilized film , uv stabillized film greennet insect net installation labour , exhaust fan with installation , 15 w solar street ligh system set with installation , 15 w solar street light repering work , motor repairing 1.5hp , 2 hp three phase exhaust fan motor repairing , 2 hp three phase exhaust fan new motor with installation , gi pipe 1.5inch 2 mm thikness with fitting , gi pipe 2inch 2 mm thikness with fitting , repairing of panelboard , 2 core 4 sq cable with fitting , 3 core 4 sq cable with fitting , 4 core 4 sq cable with fitting , fiber or pvc gutter with fitting , temperature controller with fitting , humidity display with fitting , fogging auto controller with fitting , bedsheet 100 micron , fabrication work , electric work , plumbing work upvc pipe and fitting 50 mm , plumbing work pvc pipe and fitting 63 , micro irrigation facility for plantation , micro irrigation facility for hitech nursery , 16 mm lateral with installation , 16 mm inline with installation , 8 lph dripper with fitting , inverted modular sprinkler or fogger sytemt for nursery , installation of foundation pipe pole digging and civil material without pole , hp solar controllar , hp solar motor pump , 545 watt solar panel with fitting , 50 mm10 kg isi hdpe pipe , remove damage uvsheet greennet insecti net profile

State Government

CTN :45499605

01 Jul, 2026 64.43 Lacs

Durg - Chhattisgarh

Tender For 77 mld प्लांट से निकलने वाले waste water re – circulation में उपयोग हेतु पाइप लाइन एवं पंप स्थापना कार्य | - pipeline and pump installation work for use in waste water re-circulation coming out of 77 mld plant.

CTN :45252333

16 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of t/c speed sensor , flange with coupling , cross piece , male plug , oil pump casing , oil pump special nut , plug , flange , tightening ring , cover , alu shim , return line to cr case , pipe clamp , elastic mountings tsc t140/70 d , gasket , o-ring , o ring-an33 nse6.5 21a7 , fuel feed pump- cw engine , limit switch box , rubber compensating sleeve dn40 pn16 lf130 , rubber compensating sleeve dn80 pn16 lf130 , pipe , temperature sensor , turbocharger speed tranmitter , sleeve flexmaster gm10006-20 nbr , tab washer dn 12 , gasket , piston ring , o- ring , gasket , equipped cylinder head , o ring 15x204 viton (20209) , o ring 5x589 viton (20312) , peak pressure indicator , spherical bearing ge505w , inlet thermostatic valve , fw level switch , immersion heater , over speed solenoid valve , pressure gauge , spring washer packing , sealing ring , hex headed screw , hex headed screw , locking plate , cap nut , main bearing assly , bearing , eccentric shaft , gov driving gear pinion , ball bearing box , pair of bevel gears , bevel pinion , shim , safety valve in oil cct assly , water outlet part , duct , bs ring , joint , o ring no 87 21a7 , flexmast coupl(pipe-88.9mm-o.d) , joint , joint dn 150 , bolt m16x110l 8.8 with 2mm loc , injector pump pin , locking bolt m14-60 29 u 10.9 , water pump pinion , oil seal , internal circlip , shim , mech.seal for balmo f.f.pump , seal-balmo fuel feed pump , flexmast conn gm10006-038 (38 od) , flow switch for l.o. priming safe , joint press seal(p.18) 26x18 , safety valve , gasket , set of gasket for filter+hyd , set of full flow filtering elements , servo booster for pga 12 governor , temp sensor exhaust , fuel feed pump-ccw engine , set of oil seal 19x30x7 for aroto g15sp(ffp) , fuel feed pump-aroto-g15sp-fr ccw eng , drive rotor , driven rotor , packing at both end , mechanical seal , 25 pin socket insert plug jaeger , injector assembly , sleeve dn80 pn16 , lub oil thermostatic valve range 63/71 deg c , thermostat element , shim injection pump , o ring , expansion bellow , air staring vale , hose pipe mod 16 sae 100r5 l 220mm , flexible hose , rubber compensating sleeve dn65 pn16 lf 130 , ruber compensating sleeve dn150 pn16 lf130 , air distributor , loctite 648 , fuel clogging indicatior , sensor ref 19127sc , sensor ref 1950sc , switch for manual stop-xck-j265 , proximite detector mod 9984-2102 , breaker switch type zckj2 , starting air valve , 2 way pneumatic valve , o ring , disc spring dia 25xdia 12.5x1.5 , inner star for tacoma opvs , duplex fuel filter , filter element for 2-stage marin engine , injector calibration pump , temperature regulating pn40dn100 , pneumatic stop valve , pressure regulating valve , pressure switch , thermometer 0-100 , temp.sensor mbt4-s-90-m18x1.5-ef3 , thermostat element for naval opv , seal kit , circulation heater element for ktmi opv , thermostat for circulation heater for ktmi opv , fuel filter element for filter type-20251261751032 , over speed air lowpresure switch raing bar , l o p gear , non return valve , screw plug , packing perform , hydropneumatic pump with hoses , stud , circlip external-65mm , circlip external 90 mm , core plug hex.head 1/2 , rocker arm equipped , contact (aux) , o , ring , cup plug , exhaust gasket , anode , thermometric duct , inner star

CTN :45476070

15 Jun, 2026 2.37 Crore

Saharanpur - Uttar Pradesh

Tender For audyanik proyog avam prashikshan kendra saharanpur mein nirmaanadhin shahad utkrishthta kendra se sambandhit machinery or parts ki apoorti or establishment ka karya - supply & installation of automatic honey bottling filling machine with sensor based calibrator including with filling range (50 grams to 1000 grams), outout/min (any size within range 3000 to 5000 bpd), filling system (pneumatic vmp system synchronize with servo motor), direction of movement (left to right), number of head/syringe (single), drop controller (y- pneumatic stopper), calibration of machine (automatic with sensor), inlet material stopper (fg valve), feed tank (direct connected), feed tank overflow controller (float type), material feed in m-tank (automatic), heating arrangement in m-tank (water bath system), material shaker in m-tank (electrical shaker), bath temperature & material temperture monitoring system (full auto-control with ccp), electric spply (230 cm v/50hz), tempreture controller (pid), machine dimensions (250 cm x 100 cm x 210 cm (approx) and net weight (300 kg). etc all complete with isi marked., supply & installation of automatic linear capping machine including with output/hour (any size with range 4000 bpd), direction of movement (left to right ), machine dimensions (180 cm l x 90 cm w x 170 cm h (approx)), sensor (panasonic), pneumatic accessories (spac) and no bottle- no cap (yes). etc all complete with isi marked., supply & installation of automatic round bottle sticker labelling machine including with output/hour (10000 bpd), direction of movement (left to right), controlling (micro controller base mm interface), conveyor motor (0.25 hp/415 v/ 50 hz), pressing device motor (60 watt / 220 v/ 50 hz), servo motor (750 watt), label accuracy (+/-1mm), gap sensor (u-type), bottle spacer (electronic), variable speed (40 bpm-max), hmi & plc (7 inch coloured touch pad type), pneumatic (spac), pressure roller (sillicon), adjustment (lead screw), label size (up to 100 mm width), bottle dia (up to 120 mm dia), batch counter (yes) and online data indication (yes) etc. all complete with isi marked., supply & installation of air compressor including with type (reciprocating), tank volume (250 ltr), pressure range (10 kg/ cm 2), no of head-(02 nos.), type (industrial) and operation (continue) etc. all complete with isi marked., supply & installation of induction sealing including with automatic induction sealing machine etc. all complete with isi marked., supply & installation of turn table including with 750 mm dia turn table moc ss304, motor - 0.5 hp/440 vac, vfd - invt/delta and model -cgmp etc. all complete with isi marked., supply & installation of packing conveyor including with 10 feet long packing coveyor, width of conveyor 300 mm, motor - 0.5 hp/440 vac and model - cgmp etc. all complete with isi marked., supply & installation of auto honey feed pump including with automatic honey feed system for filling machine from plant etc. all complete with isi marked., supply & installation of bottle washing machine including with automatic bottle cleaning machine tilting action type etc. all complete with isi marked., supply & installation of particle inspection table including with online particle checker etc. all complete with isi marked., supply & installation of online printer including with online ink jet printer etc. all complete with isi marked., supply & installation of slate chain conveyor including with ss304 slate chain conveyor, motor - 0.5 hpx 3 nos, vfd - 3 nos and guider - as per design etc. all complete with isi marked., supply & installation of automatic wax sheet foundation mill including with sheet making roller set (cell size 5.4 mm, length ,600 mm, dia 200 mm), cold water circulation system 0.5 hp, conveyor belt length - 300 mm, sheet cutting system, water cooling system 1.5 - ton cap, wax malting tank, wax filtration system, ss tray, ss bucket, operation by hmi, dat

Central Government/Public Sector

CTN :45280010

20 Jun, 2026 NA

Bardhaman - West Bengal

Tender For corrigendum : supply of pump, centrifugal f/low acid circulation pr_ 4203084185(038) , pump, centrifugal f/high acid circulation pr_ 4203084185(038)

Hybrid Geothermal System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

Central Government And Public Sector

State Government

State Government

Central Government/Public Sector

State Government

Central Government/Public Sector