Latest hydraulic cutter scrap Tenders | Government hydraulic cutter scrap Tenders

CTN :45606519

29 Jun, 2026 NA

Coonoor - Tamil Nadu

Tender For supply of machinery spares and workshop tools to all tantea factories - machinery spare, uj cross (srmt make) rll 793 type 47mm x 134mm (big cup), uj cross (srmt make) rll 790 type (small cup), uj cross 39.69 mm x 115.65 mm, uj cross 34.94 mm x 125 mm, propeller shaft - for sennova ctc, teflon bellow for kilnburn drier ff model 5500 mm x 250 mm x endless, teflon bellow 250 mm width x 5240 mm endless, teflon bellow 250 mm width x 5250 mm endless, teflon bellow 4000 mm x 250 mm x endless, teflon bellow 4400 mm x 250 mm x endless, gun metal gable bush for 18" rotor vane (l-160mm, id-79mm, od-112mm), arm centre gun metal bush for 18" rotor vane (l-75mm, od-68mm, id-48mm), coupling set for 18" dia rotor vane shaft (78 mm bore 22 mm x 6 mm key size) (vikram make), coupling set for 18" dia rotor vane shaft (95 mm bore 26 mm x 6 mm for gear box shaft end key size (vikram make), gable bush (gun metal) od-95mm, id- 69.5mm, l-125mm, gable bush (gun metal) od-106 mm, id- 80 mm, l-160 mm, arm centre bush (gun metal od-75 mm, id-38mm,l-100 mm, arm centre bush (gun metal od-63 mm, id-50.8 mm, l- 76mm, rotor vane 18" coupling rubber bush, rotor vane 15" coupling rubber bush, rotor vane 18" coupling pin, rotor vane 15" coupling pin, hammer (for impact pulverizer), beater (for kaysons pulverizer), bucket elevator conveyor, elevator bucket (s.steel), round type rubber bush, square type rubber bush, gun metal split bearing for middleton (split bush), frp - strip (teflon) size 2"x1/4"x13", frp strips 2"x13"x 5mm thick, 12"x2"x6mm frp teflon blade for green leaf sifter, shredder blade l- (17.5mm) 445mm, bore - 45mm, width - 75mm, thickness - 6mm, m.s. sheet-8x4x18g, gun metal bush od-39 mm, id- 19mm, l-45mm, nylon bush od-39 mm, id- 19mm, l-45mm, gun metal bush od-30 mm, id- 12mm, l-45mm, workshop tools, 52 lh single angle milling cutter m+15 (addision make), 55 lh single angle milling cutter m+15 (addision make), 62 lh single angle milling cutter m+15 (addision make), 65 lh single angle milling cutter m+15) (addision make), 60 lh single angle milling cutter m+15 (addision make), 70 lh single angle milling cutter m+15 (addision make), 10 tpi v profile grooving chaser m+15-102 th (addision make), 8 tpi v profile grooving chaser m+15 -120th (addision make), 8"x1"x1/2" green colour grinding wheel rough & smooth, 8" dia grinding wheel rough & smooth, 4" dia disc grinding wheel, grinding stone 8"x1"x5/8" rough and smooth, cup shape grinding stone, 16" x4" grinding wheel 1" thick, 4" cut off wheel, 24" measuring scale - metal, mesuring tap 3 mtr

CTN :45441089

18 Jun, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackels in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

CTN :45057581

04 Jun, 2026 9.50 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : supply of fabrication and erection work e e - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bot

Central Government/Public Sector

CTN :45114820

05 Jun, 2026 NA

Vadodara - Gujarat

Tender For corrigendum : supply of refer to the attached specifications , item sr no - 25 - c clamp set only sutaibal for dvvnn 2525m16 - please refer to the attached specifications , item sr no - 26 - insert only sutaibal for tgfh 32-5 - please refer to the attached specifications , item sr no - 27 - parting blade only sutaibal for tkn5 insert - please refer to the attached specifications , item sr no - 28 - grooving tool insert - please refer to the attached specifications , item sr no - 29 - side tool holder sandvik - please refer to the attached specifications , item sr no - 30 - inserts - please refer to the attached specifications , item sr no - 31 - inserts - please refer to the attached specifications , item sr no - 32 - spare lever - please refer to the attached specifications , item sr no - 33 - screw - please refer to the attached specifications , item sr no - 34 - shim - please refer to the attached specifications , item sr no - 35 - inserts - please refer to the attached specifications , item sr no - 36 - parting tool blade - please refer to the attached specifications , item sr no - 37 - insert - please refer to the attached specifications , item sr no - 38 - parting tool blade iscar - please refer to the attached specifications , item sr no - 39 - inserts iscar - please refer to the attached specifications , item sr no - 40 - thearding holder external - please refer to the attached specifications , item sr no - 41 - thearding insert -external - please refer to the attached specifications , item sr no - 42 - thearding insert - external - please refer to the attached specifications , item sr no - 43 - thearding insert -internal - please refer to the attached specifications , item sr no - 44 - thearding insert -internal - please refer to the attached specifications , item sr no - 45 - tool holder - please refer to the attached specifications , item sr no - 46 - inserts - please refer to the attached specifications , item sr no - 47 - tool holder - please refer to the attached specifications , item sr no - 48 - spare screw - please refer to the attached specifications , item sr no - 49 - insert screw, 5513-020-01 indstl. std - please refer to the attached specifications , item sr no - 50 - shim - please refer to the attached specifications , item sr no - 51 - inserts - please refer to the attached specifications , item sr no - 52 - tool holder - please refer to the attached specifications , item sr no - 53 - inserts - please refer to the attached specifications , item sr no - 54 - tool holder - please refer to the attached specifications , item sr no - 55 - inserts - please refer to the attached specifications , item sr no - 56 - spare-lever - please refer to the attached specifications , item sr no - 57 - screw - please refer to the attached specifications , item sr no - 58 - shim - please refer to the attached specifications , item sr no - 59 - shoulder milling cutter -dia 125mm, 85mm - please refer to the attached specifications , item sr no - 60 - taps sets- inches - please refer to the attached specifications , item sr no - 61 - taps sets-inches - please refer to the attached specifications , item sr no - 62 - tap set metric - please refer to the attached specifications , item sr no - 63 - tap set metric - please refer to the attached specifications , item sr no - 64 - tap set metric - please refer to the attached specifications , item sr no - 65 - tap set metric - please refer to the attached specifications , item sr no - 66 - tap set metric - please refer to the attached specifications , item sr no - 67 - tap set metric - please refer to the attached specifications , item sr no - 68 - taper sank drill - please refer to the attached specifications , item sr no - 69 //bid details 2 / 74 - taper sank drill - please refer to the attached specifications , item sr no - 70 - taper sank drill - please refer to the attached specifications , item sr no - 71 - taper sank drill - please refer to the attached specifications , item s

CTN :45321993

01 Jun, 2026 NA

Panipat - Haryana

Tender For rc/purchase of workshop tool / general consumables material part-2 > - flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- jk, flat/triangular/half round/round/sqaure file both rough and fine all sizes, make- miranda, needle file set, make- jk, hss bolt tap set mm/bsf/bsw all sizes make- totem, hss tool bit all sizes, make- miranda, hss tapered shank drill/hss central drill/ hss die nut/hss bolt tap all sizes, make addidon, knurling tool, h.s.s end mill cutter, size- 10mm, h.s.s end mill cutter, size- 12mm, carbide insert turning holder left and right side v shape, size- 10 inch, carbide insert tool holder ( insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404 size-1/2 inch, carbide insert boring tool, holder size- 10 inch, stone cracker tool for roller tip cracker, carbide insert tool holder (insert size-1/4 inch), carbide insert tool, v-shape, v nmg 160404, size-1/2 inch, roller grooving tool with angular carbide tip 350angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller grooving tool with angular carbide tip 400angle, size- 40mm x 40mm x 12 , make- sandwik/precision, roller meshchart grooving tool with 8mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, roller meshchart grooving tool with 6mm x 50mm sq carbide tip, size: 40mm x 40mm x 12 , make:sandwik/precision, en-8 rod, size-32mm, length-6 mtr (m.t.c required), en-8 rod, size-38mm, length-6 mtr (m.t.c required), en-8 rod, size-45mm, length-6 mtr (m.t.c required), en-8 rod, size-50mm, length-6 mtr (m.t.c required), en-8 rod, size-60mm, length-6 mtr (m.t.c required), en-8 rod, size-65mm, length-6 mtr (m.t.c required), en-8 rod, size-70mm, length-6 mtr (m.t.c required), en-8 rod, size-80mm, length-6 mtr (m.t.c required), en-8 rod, size-100mm, length-6 mtr (m.t.c required), en-8 rod, size-120mm, length-6 mtr (m.t.c required), en-8 rod, size-125mm, length-6 mtr (m.t.c required), en-8 rod, size-150mm, length-6 mtr (m.t.c required), m.s round, size-12mm (per kg), m.s round- size 18mm (per kg), m.s round- size- 25mm (per kg), brass rod, od: 2 inch-6 inch, length- 3 mtr, (mtc required), en-45 flat (per kg) size- 10mm x 60 mm, m.s square bar (per kg) size- 10 mm x 10 mm, en-45 spring steel flat (per kg) size: 50 x 6mm, en-45 spring steel flat (per kg) size: 50 x 8mm, en-45, spring steel flat (per kg) size: 65 x 8 mm, en-45, spring steel flat (per kg) size: 75 x 8 mm, carbon flat 8 mm x 50mm, carbon flat 6 mm x 50mm, fencing wire netting width- 6 feet length-50 feet thk 3mm hole size- 2 inch x 2 inch, rubber tapper plug, size-42x45mm, union joint, size:1/4 , union joint m-30 (req for 30mm od tube), ferrule-30mm (req for 30mm od tube), rubber rope 3mm, rubber rope 5mm, scotch brite pad, g.i rivit: size- 8 x 25mm, kassi (good quality), belcha (good quality), shovel (good quality), suza, sutli (per kg), copper sheet, size: 1000 x1000x 3mm (28kg), m.s nipple both end threaded size- 1/2 x 9 , m.s nipple both end thread, size-3/4 x 12 c-class, m.s nipple both end threaded size- 1 x 8 , m.s nipple both end threaded size- 10mm x 8 , m.s nipple both end threaded size- 20mm x 8 , m.s nipple both end threaded size- 15mm x 8 , m.s nipple both end threaded size- 40mm x 8 , m.s nipple both end threaded size- 2 x 8 , m.s nipple both end threaded size- 2.1/2 x 8 , m.s nipple both end threaded size- 3 x 8 , pvc pipe 6mm (transparent) (per mtr), d-cycle, cap: 1 ton, heavy duty, make-usha martin, d-cycle, cap: 2 ton, heavy duty, make-usha martin, d-cycle, cap: 3 ton, heavy duty, make-usha martin, d-cycle, cap: 5 ton, heavy duty, make-usha martin, d-cycle, cap: 10 ton, heavy duty, make-usha martin, d-cycle, cap: 25 ton, heavy duty, make-usha martin, steel wire rope sling steel core size- 1 x 5 mtr x 9 eye size, steel wire rope sling steel core size- 3/8 x 5 mtr x 9 eye size, steel wire rope sling steel core, size- 32mm (6 core) x 6.6 mtr length x 28 soft eye with pressed sleeve, steel wire rope sling steel core, size- 32mm

CTN :44135348

27 May, 2026 NA

Parganas - West Bengal

Tender For bid to ras corrigendum : supply of widax tool holder , iscar grooving and parting tool holder , insert ccmt , solid carbide end mill cutter , holder sir 0025 r 16

CTN :45105964

21 May, 2026 NA

Bazpur - Uttarakhand

Tender For supply of tools and tackles materials in sugar mill - roller grooving tool size- x 6 x 40 isi/iso standard, size- x 6 x 45 isi/iso standard, size- x 6 x 50 isi/iso standard, size- 1 x 12 x 40 isi/iso standard, size- 1 x 12 x 45 isi/iso standard, size- 1 x 12 x 50 isi/iso standard, size- 1, x 12 x 40 isi/iso standard, size- 1, x 12 x 45 isi/iso standard, size- 1, x 12 x 50 isi/iso standard, carbide cutting tools. size: x 4 right hand. isi/iso standard, size: x 4 left hand. isi/iso standard, size- 1 x 6 right hand. isi/iso standard, size- 1 x 6 left hand. isi/iso standard, size- x 6 right hand isi/iso standard, size- x 6 left hand isi/iso standard, carbide tips all size isi/iso standard, h.s.s. tool bit all size isi/iso standard, tapper shank dril all size . isi/iso standard, straight shank dril all size. isi/iso standard, files all size. isi/iso standard, tape set of (3 piece) bsw all size. isi/iso standard, tap set of (3 piece) mm. all size. isi/iso standard, die nut inch/mm all size. isi/iso standard, d. spanner set all size. isi/iso standard, ring spanner set all size. isi/iso standard, box spanner set all size. isi/iso standard, pipe rinch all size. isi/iso standard, measuring tape 3 meter long . isi/iso standard, do - 5 meter long. isi/iso standard, do - 15 meter long. isi/iso standard, tin cutter 10 . isi/iso standard, do - 16 isi/iso standard, revolving centre 3 m.t. isi/iso standard, revolving centre 4 m.t. isi/iso standard, revolving centre 5 m.t. isi/iso standard, oil can capacity 200 m.l. isi/iso standard, screw pitch gauge. isi/iso standard, wooden saw(circular saw)1/8 x 18 isi/iso standard, drill socket (i) size 0 1 isi/iso standard, (ii) size- 1 2 isi/iso standard, (iii) size- 2 3 isi/iso standard, (iv) size- 3 4 isi/iso standard, (v) size- 4 5 isi/iso standard, h.s.s. black tool bar square high grade all size, steel rule 12 . isi/iso standard, steel rule 24 . isi/iso standard, screw driver set all types and sizes. isi/iso standard, pliar all type and sizes. isi/iso standard, drill chuck straight size: 1/8 to isi/iso standard, carbide tips only (all size) isi/iso standard, high carbon steel tool 10% cobalt size: to 1 isi/iso standard, knurling tool multi purpose. isi/iso standard, carbide tip tool (with handle) k-20 for (roller grooving) (i) size- 1, x 12 x 40 isi/iso standard, (ii) size- 1, x 12 x 45 isi/iso standard, (iii) size- 1, x 12 x 50 isi/iso standard

Central Government/Public Sector

CTN :43582679

14 May, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : tender for supply of procurement of carbide inserts and tool holder limited tender enquiry d d -square shoulder face mill , cutter , indexable , square shoulder face mill , indexable , positive rake , tool holder pclnr , tool holder pclnl , carbide insert for indexable milling cutters , carbide insert , carbide insert , carbide insert , carbide insert , shell mill type side & face mill cutter , insert screw , key , bt50 adaptor , carbide insert. , insert screw. , allen key , , reverse counter bore , indexable square shoulder face milling cutter , indexable square shoulder face milling cutter , carbide insert , tool holder for parting & grooving , carbide insert for parting , tool holder for parting & grooving

CTN :44757118

27 Apr, 2026 9.00 Lacs

Farrukhabad - Uttar Pradesh

Tender For corrigendum : fabrication work d d - places , replacing wornout runner base and installing a new runner base of cane carrier and baggage elevator and r b c , replacing wornout runner with new one of cane carrier and baggage elevator and r b c , removing wornout angle iron and t iron of the cane carrier and reinstalling it by straightening the crooked part , removing the wornout part of the suit from different places and fitting it with new one , chevron grooving of new rollers of the mill , chevron grooving of old rollers of the mill , remove the wornout partition plates of the juice box above and below the juice heater by 10 or 12 mm ms plate and install it , installing ribs at the top and bottom partitions of the juice heater , repairing save all of qurdbody , removing old wornout gutters installed at various places and installing it with new gutters , remove the old wornout save all from pan and quard and install it with new one , reinstalling the new umbrella fitted inside the pan by making a new one and removing the old one , replacement ribbon arm of the mascute receiving crystallizer , making new separator of a centrifugal machine , removing the wornout truff of the hopper and installing it with new one , making and installing new separators for continuous centrifugal machines , removing the tubes of quad juice heater and dynamic juice heater and expanding them by installing new tubes and giving their hydraulic testing satisfactory of size 42 mm , removing the tubes of pan installing new tubes and expanding them and giving hydraulic tesing with satisfactory trial of size 96 mm , removing the wornout flue gas ducting of both the boilers and installing it with newone making from new or old plates , removing the wornout front and roof plate at boiler number 1 and 2 and installing with a new plate , removing the damaged boiler damper and installing a new one , making bagasse suit and installing. , replacement of juice over flow box of clarifier , making and installing bed of motor and pumps at various places as per requirement , replacement 6 inch dia cooling pipe of sulfur furnace , removing the monitor casing of a machine from old machine and installing it and giving its a trial , making amd replacing manholes at various places , making and replacing the enternals of cather of the pan. , making and replacing the new hood of cane cutter , removing the old bottom plate of the lowest compartment of the clarifier and placing a new plate on it after placing an angle trap as per the instructions and giving a satisfactory water trial , reinstalling the stirrer of the clarifier and giving a satisfactory trial , removing the shaft of a pug mill and replacing the old bushes on both sides and fitting new ones , removing and refitting the shaft of a brown sugar magma mixer and installing with new bush , reinstalling the trufff of connecting rod of the hopper , making and installing new catcher strainer , removing the old rail line of the trolley of the unloader and fitting the new rail line satisfactorily and doing water level , reinstalling the old rail line of the unloader s bridge and fitting it and checking water level etc , removal of old and weak channels of 3 inches to 10 inches diameter installed at various places and installation of new ones as per requirement , cutting and straightening old plates installed at various places as per requirement , removal of old and wornout scrubber installed on sulfur furnace and making and replacing with 8 or 10 mm plate and making all the connections , removing the trufff plate including support corroded shell and top cover plate of the top chamber of the clarifier and fitting the new plate and giving it s a water proof trial , re-installation alignment and //bid details 2 / 47 trial of hopper driving end , making and installing the top cover of the centrifugal machine , making an arm and installing it on the shaft of pug mill , making and installing scrubber and bottle jackets of sulfur f

Central Government/Public Sector

CTN :43370110

30 Mar, 2026 NA

Haridwar - Uttarakhand

Tender For bid to ras corrigendum : tender for supply of carbide insert , carbide insert , carbide inserts for indexable tool holder , carbide insert (pvd coated) , high performance carbide insert , carbide inserts for indexable tool holder , carbide insert , face mill cutter , indexable , face mill cutter , indexable , face mill cutter , indexable , face mill cutter , indexable , face mill cutter , indexable , face mill cutter , indexable , carbide insert , carbide insert , carbide insert , carbide insert , carbide insert , sqaure shank grooving tool holder , sqaure shank grooving tool holder , indexable end mill extra long , carbide insert , insert screw

Hydraulic Cutter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector