Latest hydraulic grab repair Tenders | Government hydraulic grab repair Tenders

CTN :45606507

04 Jul, 2026 NA

Chennai - Tamil Nadu

Tender For purchase of machinery and equipment for the heat power engineering laboratory, department of mechanical engineering - procurement of machinery and equipment for the heat power engineering laboratory, department of mechanical engineering, multi cylinder petrol engine test four stroke, water cooled petrol engine with self-start assembly . mechanical rope brake with spring balance for loading. number of cylinders: 4 with cut off arrangement. power : 4 -10 hp , speed 1500 - 3500 rpm , capacity: 1500 cc or near values. brand material : mild steel engine and loading arrangement fitted with rigid frame along with cooling water inlet and outlet piping arrangement, air stabilizing tank with u tube manometer setup for volumetric test and fuel tank. heavy -duty fabricated ms base frame anti -vibration mounting arrangement powder -coated / painted finish, air compressor test rig single acting - double stage air compressor with inter cooler and after cooler setup. 1 phase / 3 phase motor with 1 hp motor starter and with all standard accessories(air stabilizing tank with pressure gauge of max pressure limit 15 kg/cm 2 , safety valves , orifice meter with u tube manometer to measure the pressure difference).

State Government

CTN :45624531

26 Jun, 2026 11.79 Lacs

Palwal - Haryana

Tender For desilting of drain from hodal minor to ujina drain along with nh2 including the cost of loading and unloading of the sludge from the drain and its disposal with mechanical upto a suitable site beyond the mc limit, lifting and refixing of the rcc sla

State Government

CTN :45624576

26 Jun, 2026 13.22 Lacs

Palwal - Haryana

Tender For desilting of drain from samshanghat to ujina drain including the cost of loading and unloading of the sludge from the drain and its disposal with mechanical upto a suitable site beyond the mc limit, lifting and refixing of the rcc slabs on the drain,

CTN :45591951

23 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot miscellaneousellaneous scrap - lot no.y.plast.exemp.v & scattered.06.26.01 description- scrap plastic items including ferrous and non ferrous attachments. [our offer:- scrap & cond. plastic items such as spray jar, chair, table, drum, helmet, torch light, pvc water tank, pvc door, light fitting, various type of tube light with plastic/ iron body and other miscellaneous fibre and plastic items etc. as available in the lot with or without very slight nf & ferrous attachment.] [nb: loading will be start from sector v] [one mechanical cut may be allowed.] [loading will be done by purchaser's own arrangement]

CTN :45592297

24 Jun, 2026 30.00 Lacs

Pahalgam - Jammu And Kashmir

Tender For supply installation testing and commissioning of pump unit and other electro-mechanical equipments at laripora pahalgam - supply, installation, testing and commissioning of submersible type pump sets with motors and allied mechanical and electrical components/ items as per manufacturer s recommendations and guide lines, and as per the scope of the work at site. the equipment supplied conform to latest is- standards and codes with fail safe circuits/ devices for(i) over loading (ii) under loading (iii) clogging (iv) shut off (v) low liquid level (vi) single phase prevention devices (vii) over heating etc. the pumping units shall have following technical specifications: pumps:type of pump :non clog centrifugal volute type sewage submersiblepumpscapacity= 28.4lpshead = 17.5 metres or abovesolid handling capacity: 20mm (minimum) quality of water: sewage water to be handled meterial of construction:pump casing : cast ironimpeller : stainless steelpump shaft : stainless steelmotor body : cast ironsealing : dual mech. seal...contd.. as per annexure-a, providing/supplying and fitting of 100 mm m.s flanged delivery main to be connected with existing rising main at site. the job includes providing and welding of m.s flanges 12 mm thickness. the flanges shall be double welded both from inside and outside of the pipe using standard electrode of reputed make. the cost on account of supply/ fabrication of bends and providing/ fitting of flanges is included in the job. (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, non-rising spindle soft seated glandless gate/ sluice valves as per is14846 for regulating the water supply outside the pumping units p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., providing and fitting of 100 mm dia ductile iron double flanged, slanted seat swing check valve( nrv) as per is 5312 p.n rating 1.0.the job includes providing and fitting of 02 nos. m.s flanges perfectly adaptable to the inbuilt flanges of the valve which shall be fitted with rising main of the pumping unit at appropriate spots as per site requirement (complete job)., gantry over sump :- fabrication, providing, fitting of ms gantry over sump with 02 nos. vertical columns. the gantry fabricated out of ismb-100, 3.25 mts long placed face to face. 300x300mm ms plates 12mm thick fitted on top and bottom side of column .bottom plate welded to the reinforcement of the sump and grouted in 1mx1mx1m pcc 1:1.5:3 mix. ismb-100,3mts long is to be placed and welded to the top plate of the columns .the job also includes providing and fitting of 2-tonne capacity chain pulley block with monorail along with hoisting chain (complete job)., providing and fitting of 50 mm23.5 core ,al pvc insulated cable, armouredfor internal connectionscrimping, taping etc. note:- the cable terminal ends for connection to switchgear at various requisite points shall be al. thimbles and of appropriate size and connected by hydraulic crimp tool only (complete job)., providing and fitting of 4-core 16 mm2 flat /circular submersible copper cable conforming to is: 694 (part 1st) 1964 & is: 694 (part 2nd) - 1964 for submersible pumping unit and other electrical equipment s. the cable connections terminal shall be fitted with copper thimbles of required size (complete job)., fabrication, providing and fitting of main electric control panel of appropriate size fabricated out of 14 swg sheet having required openings/vents and protection class : ip-55 & fitted with accessories as under: a) bus bar chamber: 160 amperes(tpn) b) main circuit breaker (incomer mccb) qty:- = 01 nocurrent rating = 160 amp. c) change over switch:qty. = 01 no.rating = 160 ampere....contd... as per annexure-a., electrification. providing/fitting of lighting and fan points (06) in

CTN :45591943

23 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.m.nfa-1.exmp.e & i.06.2026-27.01 description- scrap aluminium with iron attachments and other aluminium casting, field coil, lamp caps, aluminium boring etc., (our offer) scrap & cond. aluminium items such as air filter (with iron and fiber wool attachment), aluminium wheels with or without iron and bearing attachments, window frames with or without rubber sleeves and other miscellaneous nfa-1 items as in the lot in one place at "e-2" sector and one place in between "i-1 & i-2" sectors. may be in intact or dismantle condition. mechanical press allowed without causing any weight loss of material. before bidding, bidders are requested to inspect the lot. loading will be done by purchaser's own arrangement.

CTN :45572434

24 Jun, 2026 2.45 Lacs

Thanjavur - Tamil Nadu

Tender For supply of thermal equipments - upgradation of laboratory equipment, four stroke single cylinder slow speed diesel engine with mechanical loading (retardation test) (specification - refer nit document), stefan boltzmann setup (specification - refer nit document), guarded hot plate setup (specification - refer nit document)

Central Government / Public Sector

CTN :45591790

22 Jun, 2026 NA

Multi City - Andhra Pradesh

Tender For auction sale of depot miscellaneous scrap - mobile compactor storage system :(as is where is basis) actual lot no. 0311260100 pl no.98325012 (01) (hsn code: 73089090, gst @ 18% on fcm basis)un-serviceble mobile compactor unit contains 8 shelves using for file storage in office (mechanical drive) ,total weight -500kg approx .broken/damaged ,with or without all attachments/parts.note:mode of disposal -as is where is basis, mode of delivery- 01 nos by lot,cutting and dismantlling permitted for loading purpose. location -admin building m&g stores office (image attached)

Central Government/Public Sector

CTN :45575282

08 Jul, 2026 NA

Lucknow - Uttar Pradesh

Tender For bighapur(bqp) ballast depot : supplying, stacking and mechanical loading of 60000 cum 65 mm gauge machine crushed hard stone track ballast as per rdso/lko's ballast specification for track ballast no. is/rdso-ge/0001:2023 february 2023 & ce's circular no.257 in bighapur ballast depot under aden-on.

Central Government/Public Sector

CTN :45593361

22 Jun, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of rolling stock - condemned bg 8 wheeler non-ac coaches with all available ferrous-non ferrous-wooden fittings there on but excluding the following reclaimable items-mechanical rc items- 1) distributor valve complete set, 2) buffer plunger with buffer casing complete set, 3) screw coupling with draw bar hook complete set, 4) aluminium water tanks . coach nos.- 1) kr gslr 97763, 2) nr gslr 044728 ,3) wr gslr 997191, = 3coaches, ds8 no: 232867,dt 08.09.2025, pl.no.98111061, location: tondiarpet marshalling yard, custodian: sse/c&w/tnpm, note: 1) at the time of delivery all items including zero value items such as rexene, rubber, frp etc., should be removed and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government.d and cleared by the purchaser from railway premises and should be disposed as per the existing norms of central/state government, 2) all rc items should be handed over to custodian at respective locations . 3)bio toilets should be defaced before delivery.4)rate per number should be quoted , 5)coaches are in grounded condition(bogies and wheel sets are removed). 6)cutting permitted to loadable sizes only. 7) crane loading may be permitted. 8) purchaser should take safety precaution while cutting/delivery of wagons. 9) rate per number should be quoted.

Hydraulic Grab Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

State Government

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector