Tender For labour charge for removal/transportation of silt, mud and water algae from cooling tower, cw pump house, clarifier & miscellaneous sump unit # 6 at utps. (civil ph)
Tender For supply of various items of lab equipments for govt. p g college guna district guna (m.p.) under p m usha pariyojna 4th call - supply of various lab equipments items for govt. p g college guna district guna (m.p.) 4th call, waterand soil testing analysis kit (digital) : range ph 0 to 14.00 resolution ph 0.01 accuracy ph 0.01 1 digit temp. comp. 0 to 100 deg. c., water bath (06holes) : 6 hole8 ltrs., waterbath(12holes) :12 hole 20 ltrs., water distillation apparatus(single distillation unit 2 litre/hour) : single distillation 5 litres, analytical balance : least cosunt 0.0002g, analytical weight box : 1-100g, fractional weight box : 1-500mg, physical balance : 250gm accuracy 0.1g, digital balance : least count 1mg, single pandigital balance : 0.1mg 200g, digital photoelectric colorimeter : 8 filter,1 ml, digital potentiometer : with hot plate and electrodes, digital conductometer : with cell 1cc and 0.1cc, d.o. meter : polarographic do range: typically 0 to 90 mg/l (milligrams per liter) or 0 to 600% saturation.rdo (optical) do range: usually 0 to 50 mg/l or 0 to 500% saturation., digital naphelo/turbidity meter : digital turbidity cum nephelometer range:-, 200,1000 ntu/jtu resolution:- 0.01 ntu/jtu accuracy:- 3% fs, 1digit display:- 3 digit 7-segment led light source:- ir led detector:- photodiode sample system:- 60 x 25mm clear glass test tubes power:- 230 v 10% ac, 50 hz accessories:- test tube set of 2, operation manual, dust cover, polarimeter half shade : the specific rotation ( ) is a physical property defined as the optical rotation at a path length of 1 dm, a concentration of 10 g/l, a temperature (usually 20 c), and a light wavelength (usually sodium d line at 589.3 nm), melting point apparatus :melting-point measurement range: room temperature - 400 c setting rate of the starting temp. : 50 c~400 c 5 min; 400 c~50 c 7 min minimum digital display: 0.1 c size of the capillary: 1.4mm (outside diameter) 1.0mm (inside diameter), 90mm equipped with color camera and color monitor to observe melting point with ease validation program for standard samples 8 operator names can be storedgraphic lcd display to display all test parameters & test instructions, digital melting point apparatus :melting point measurement range : ambient to 300 deg c starting melting point temperature : settable from 50 to 300 deg c heating time : 3 minutes (up to 300deg c) cooling time : 5 minutes (from 300 deg c) accuracy : +/ 0.5 deg up to 200 +/ 0.8 deg from 200 to 300 temperature display resolution : 0.1 deg c rate of heating (deg c per minute), abbe refractometer : safety bs en 60950-1:11/2006 emc en 55024 : 10/2003 en 55020 : 11/2005, tlc kit : outstanding standardization and quality control exceptional adherence, hardness and surface homogeneity. analyzing samples with high matrix- load without sample preparation. multiple samples analyzed in parallel.highly cost-efficient, fast and economical, centrifuge : 6000rpm, corkboring machine :adjustable guide that permits holes to be bored in any part of a stopper, the knurled chuck - 9/16" (14mm) shank of the eight, plated-steel borers included with the unit. the steel borers range from 3/16" to 5/8" (4.8mm to 15.9mm) in 1/16" (1.6mm) increments,, distillation apparatus : single distillation 5 litres, oven hot air : 14" 14" 14 , voltage stabilizer : 2kv, vertex shaker : 6 tube capacity, mixer small : moter capacity 900 watt, water bath(cu) : 4 , heating mantle with energy regulator : 500 w,2litre, single crucible heater : helical wire coil moldatherm insulation platinel ii thermocouple with 10tm compensated lead wire and polarized plug ceramic fiber hearthplate programmable heat-up to setpoint temperature indicates setpoint and process temperatures temperature: 1200 c (2192 f) maximum crucible sizes: 5 (top vestibule id) x 8 (heated depth), water bath rectangularsingle walled : 6 hole 8 ltrs., water bath rectangular :2 hole, kjeldahl distillation unit : unit of 3 tests, microwave oven : 30 ltr co
Tender For bid to ras corrigendum : providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - industry unit; contract for replacement of existing underground fire water headers at urea cooling tower (ct), urea plant and central workshop (cws) at rcf thal, for one..
Tender For provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate numbers of anti
Tender For corrigendum : providing of custom bid for services - 9070c26a86 hiring of air cooled chiller unit for temporary cooling during utility shutdowns steam and or cooling water at different control rooms of paradip refinery
Tender For camc of 1000tr chiller plant-camc for 1000 tr (200 tr x 5 nos.) chiller unit, condenser water pumps, chiller water pumps, cooling towers etc. installed in the ac plant room at klc, tvpm for the period of one year from 22/03/2026 to 21/03/2027
Tender For procurement of miscellaneous items for unit 4 overhauling, sgtpp - sgtpp, air filter, complete set, 250 srs filter for paph/saph [500 mw boiler] air motor veljan , port size 1inch bspt (body ported), max pressure10 bar having 40 micron sintered bronze filter element with manual drain, alumin wl & nitrile seals ( (oil side set) ), bowl of air filter for air motor of paph/saph [500 mw boiler] veljan with manual drain suitable for 250 srs filter,moc: poly carbonate. ( (oil side) ), silencer (pn:400450035) for air motor of paph 400450035 iec dusterloh ( for paph & saph air motors ), hose barb/nipple size 3/4" mnpt x 1/2" ( hose nipple 1/2 "x 1/2 "-120 nos and hose nipple 3/4 "x 1/2 "-80 nos. outer thread at one end and one end will be fitted with 1/2" rubber hose moc: ms application area: air boosting line at mrhs [quoted as per additional text description] ), needle valve,ss316 ( size: inch 3000 psi ,moc ss 316, ferrule end connection make:baldota. [quoted as per additional text description] ), flexible hose, id-12.7 mm, l-613 mm, for oil gun 500mw boiler , moc: ss 304, ms split pin # ( ms split pin, size: 4x80 [quoted as per additional text description] ), split pin # ( ms split pin, size: 3x80 [quoted as per additional text description] ), rubber hose size 1/2" ( 1/2 inch flexible rubber hose. moc: high quality braided rubber application area: at dome cooling water line of mrhs. [quoted as per additional text description] ), jubilee clamp; size: 1 ( jubilee clamp: 1/2 inch application area: at hose of air boosting line at mrhs. moc: gi [quoted as per additional text description] ), expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. ( expansion joint,mrs,mill xrp 1003 for mill xrp 1003 dia- 241 mm., length- 210 mm. with extra flange attached with inner sleeve,pressure rating - 3.5 kg medium - coal reject. minimum temp to be withstood-300 deg c. ), hose, seal air, mill xrp 1003 ss flexible hose, od - 64 mm. length - 900 mm.both side hex nut socket fittings, filter,suction,600x600x50mm,ss net 3layers,5 micron ( application: for ac & dc scanner air fans ), loctite super glue in tubes 013 gms/2gm tube ( loctite sl 5910 each contains: (300 ml) [quoted as per additional text description] ), loctite 270 (thread lock) # ( loctite 241 each contains: (50 ml/51.3 g) [quoted as per additional text description] ), stainless steel net, width:470mm for 500 mw boiler trough seal , wire thickness: 5 mm, square gap:11 mmx11mm, moc: ss 416., lubricating paste altemp q nb 50 for pa & fd fan make- kluiber ( total 5 nos of tubes. each tube contains 80 gm ), strainer for blowdown transfer pump part no-15 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc:ms ( application: boiler blowdown pump moc: ms ), shaft set,moc- ss410,vo wpe 100/320 for blowdown transfer pp vo wpe 80/400 & 100/320 pt no-7 wpil for pp sl no. bvk-50150-151/bvk-50152-153/bvk-50154-155 ( 4 sets: slightly larger, 2 sets: slightly smaller dimension as per drawing ), screw,self drill,washer,5.5x25mm ( hex flange head-pvc washer blue zinc coated-coarse thread size: 5.5x14x25 mm make: welfast ), coupling sleeve for blowdown transfer pump wpil part no-21 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155,wpil,moc: ss 410 ( shaft sleeve /coupling sleeve-a. as per drawing of boiler blow down pumps spares ), shaft sleeve for blowdown transfer pump wpil part no-19 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154-155, moc: ss 410 ( shaft sleeve-b. as per drawing of boiler blow down pumps spares. ), rubber bearing ( rubber bush/cut less bearing, moc:inner: teflon, outer: brass (copper-85%, tin-85%, lead-85%, zinc-85%). as per drawing of boiler blow down pump#s spares (larger-10+smaller-5) ), bush bearing/ b. housing for blowdown transfer pump wpil part no-20 wpil pump model: vo wpe 80-400/ 100-320,drawing no. bvk-50150-151/50152-153/50154
Tender For supply of laboratory equipment and others materials for existing, accredited district water testing distt. laboratories of division chhindwara - external calibration of laboratory equipment refrigerator/ , visi cooler rtd probe with sensar, glass thermometer, thermometer, wet and dry , thermometer, balance, analytical weight box,ph meter, tds meter, turbidity meter through iso/iec 17025:2017 accredited calibration laboratory with calibration certificate , smart uv-vis spectrophoto meter; 2206 touch screen uv-vis spectrophoto meter, wavelength range 190-1100 nm, accuracy + 1.0 nm, resolution 1.0 nm, bandwidth 1.0 nm. cuvette holder 50 mm path length. with display, with two years amc. with calibration certificate of control of absorbance, resolution power, limit of stray light. light source xenon flash lamp/tungten lamp/ deuterium lamp. to be supplied with 2 pairs of quartz cuvette. size 10 mm. including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified) make systronics , color comprator for color analysis , hot plate: rectangular body- heating upto 300'c are fitted with insulated elements. workable on 220/230 volts a.c. surface with cast iron top 300x450x150 mm rating 2 km with digitally , bacteriologycal incubator (memmert type with digital controllar): double walled, outer made of gi/ms powder coated. element of three sides' ss chamber digitally controlled temp. range 5'c above rt to 70 c + 0.5'c fitted with fan having double viewing sindow, supplied with shelves workable on 220/230 volts a.c. size 455x445x455 mm deluxe model with nabl certificate , ion meter versastar banch top modal (ph/ise)with flouride combination, epoxy body electrode with range form 0.01 mg/l ph ross electrode bnc connector, power syplly card opration manual, usb cable, universal ac power adaptor 90-260v ac electrode holding stand, stirrer (1) one pack flouride filling solution 475 ml (2) flouride standard 100 ppm 475 ml solution (3) flouride electrode storing solution 475 ml x 2 no (4) tisab iii solution 475 ml x1 including cost of supply, installation & training to lab staff for making graph of iron, nitrate, flouride, maganese test at nabl accredited lab with certificate. (nabl ceritified lab) , fluoride electrodes (combination fluoride electrode epoxy body with bnc connector) thermo orien -960913 nwp , monoquartz distillation unit-3362 dist. water output cap. (approx) 4.0 lt.hr/ electrical requirements 230-250 volts single phase 3.5x 2kw quartz heater/minimum cooling water requirment 2.5 lit/ min (ea)/ biological activity pyrogen free/ conductivity s/cm <1 x 10-6/ distillate temp 65-75'c , plate colony counter model no. cc-100 220 woult 1 year worenty measurement range 0 to 999 semi autometic precise colony counting metal plastic , laboratry refrigerator rlr-300 cooling type frost free temp. rang 2'c to 8'c glass dour 1, width 584, depth 584,hight 1702,220-240 woult 50 hz singal face , sampling bottel capicity 1 itr , membran filter assembley 5360 all galss filter holder 47mm filtretion assembley made for borosilcate glass with filter base capicity-21tr , spare for all glass filter holder 47mm dai capicity 2000ml for filter holder . tissu paper roll 3 layer