Tender For corrigendum : supply, installation and commissioning of electrical crane hoist of capacity 2 ton. specification as per annexure attached. note- (i)test report from nabl/il (ii)firm should visit trs/nkj for exact shape, size and dimension before supply ofmaterial. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]
Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 3 ton eot crane with electrical motors, panel boards, starters, hoists, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings, cross travel dsl cables between the run way rails of the crane, 4 nos of main power collection ms angles, electrical wirings,pendent and other original attachements without hooks, snatch blocks/hook blocks and wire ropes carrying the hooks. uc no.230031004. makers name-hoist o mech, bombay.total approximate weight 5517 kgs. [mild steel 5430 kgs, copper- 40 kgs, aluminium %u2013 5 kgs, cast iron %u2013 20 kgs, brass/bronze %u2013 2 kgs,wastage - 20 kgs, other non ferrous - negligible] . as is where is condition. s.1539 voucher no. 738173 dated. 22.01.25. custodian . sse / dsl shed/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taked while uprooting and lowering the crane by the purchaser.9] ladder and structures carrying the main power collection angles i.e insulater brackets are not for sale.
Tender For providing of repair, maintenance, and installation of plant/ systems/equipments (version 2) - thermal power plant; overhauling of all electrical items of hoist/cranes; service provider
Tender For procurement of different eot cranes accessories, electrical changeover switch for emd-iii and spare parts of hoist and crane for emd-ii etps htps kasimpur - down shop lead (dsl) 125 a 4 pole with all accessories for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for lt 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for mh 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), master controller for ct 4 steps for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for lt 160 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for mh 250 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ct 100 mm for 15 ton eot crane , make khandelwal udyog ltd., location -cw pump house ctps (1*110 mw), ac brake for ah 200 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake dia 250 mm ,34 kg with brake pad & brake liner for ah for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for mh dia 300 mm ,34 kg with brake pad & brake liner for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for lt 250 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), ac brake for ct 160 mm for 30/5 ton eot crane , make khandelwal udyog ltd., location -tg hall ctps (1*110 mw), electro hydraulic thruster brake for lt 200 mm ,34 kg with brake pad & brake liner for 120/30 ton eot crane , make- russian., location -tg hall ctps (1*110 mw), onload changeover switch 4 pole 200 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):200 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,#enclosure sheet, make- havells, schneider ,l&t,abb,hpl, 4 pole change over switch 320 amp#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):320a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure:steel sheet, make- havells, schneider ,l&t,abb,hpl, onload changeover switch 4 pole 400 amp 415 volt#type of product:onload changeover switch#,standard-is: 13947 iec 60947-3,unit of measurement piece#frequency-50 hz,rated current (a):400 a,selling unit each#rated voltage-415 v,no. of pole:4 pole,enclosure: sheet, make- havells, schneider ,l&t,abb,hpl, voltage-110v ac, 1 no, 3-phase, 415v ac, power contactor a30-30-10-84, current rating - 30a, coil voltage-110v ac, 1no, 3 phase, 415v ac, addon block auxilary contact mnx a2, auxiliary relay, model-my4n-100,50hz,110v ac, contactor ax32-30-10-80,220-230v,50hz, contactor ax09-30-10-80,220-230v,50hz, contactor mnx18 18a,220v,1nc,3pole., contactor 3tf 30-10-10e,220-230v,50hz., contactor ax32-30-10-84,220-230v,50hz., 3 pole power contactor mnx32 in 110v ac, aux contact block 2a ca5 x-10 1no contact, aux contact block 2a ca5-01 1nc contact, olr 3ru2116-1kbo,09a-12.5a., olr ta25du-1.8m,1.3a-1.8a., olr ta25du-15m,10a-14a., olr ux1418,1.25a-2.0a., control transformer 415vac/110vac,200va, control transformer 415vac/110vac,250va, 1-phase 415/110v,50hz,1000a,150va control transformer (panel) insulation class-f , primary current-0.361a, secondary current-1.364a,il-0.66/3kv, miniature relay g2r-2-dc5-5v 5a two set of conversion 2c(dpdt conversion)dip,12.7x28.8mm power relay rohs
Tender For tender work for “electrical maintenance and servicing work of various eot (up to 20t) cranes and hoist as & when required basis under ph-i, ph-ii & ph-iii htps korba west.”
Tender For design, manufacture, supply, installation testing and commissioning (without machine room) of passenger lift for 13 nos. passenger (884 kg capacity) g+4, complete with hand rail, voice announcement system in car (to announce the position of the elevator in the hoist way as the car passes or stops at floor served by the elevator/lift) along with all associated accessories as per cpwd. as per cpwd specification for electrical works (part-iii - lifts & escalators)2003 with latest amendments. the elevator shall be compatible for 1. harmonized guidelines for ---for accessibility and provision of facilities for persons with disabilities(divyangan) in indian railways as per enclosed rb guidelines. 2. ip based video surveillance system as per rdso spec enclosed with provision of cameras as per specification. 3. the technical parameters and facilities suggested vide swr hqrs letter enclosed the elevator shall be with cctv inside the lift car connecting to security systems through wireless/wifi and audio announcement features compatible to integration with existing security systems if any. the rate for camc for a period of 5 years after the completion of regular warranty period of 2 years to be quoted separately apart from the rate of elevator to evaluate the offer. supply cost includes warranty period of 24 (twenty-four) months from date of commissioning. [ warranty period: 24 months after the date of delivery ] ]
Tender For providing of repair and overhauling service - electronic weighing systems as per is 9281 (part i, part ii, part iii, part iv); electrical hoist crane; yes; buyer premises
Tender For providing of repair and overhauling service - electronic weighing systems as per is 9281 (part i, part ii, part iii, part iv); electrical hoist crane; yes; buyer premises
Tender For providing of repair and overhauling service - electronic weighing systems as per is 9281 (part i, part ii, part iii, part iv); electrical hoist crane; yes; buyer premises