Latest hydraulic baling press Tenders | Government hydraulic baling press Tenders

Central Government/Public Sector

CTN :40523140

09 Jun, 2025 NA

Barh - Bihar

Tender For supply of item_ 10_ m2292989043_ 100252532_ jack, hyd: sgl act, 50-75, 700-750bar, 100t , item_ 20_ m2292989042_ 100252532_ jack, hyd: sgl act, 150-175, 700-750bar, 50t , item_ 30_ t2293620444n_ 100252532_ puller set, hydraulic, 15-20 ton, 3 jaw

CTN :40556957

20 Jun, 2025 NA

Aurangabad(Bh) - Bihar

Tender For supply of puller, hydraulic, 50 ton- t2290700806n , puller set, hydraulic, 15-20 ton, 3 jaw, t2293620444n , 3 jaw puller, mech, 5t, 100-160mm, 200-270mm, m2271651508 , 3 jaw puller, mech, 10t, 80-200mm, 50-250mm, m2271651509

Central Government / Public Sector

CTN :40538239

19 Jun, 2025 NA

Vijayawada - Andhra Pradesh

Tender For supply of hydraulic bearing puller within built pump suitable for 3 legged bearing extractor for auxiliary machine capacity 4 ton , maximum reach 185 mm , maximum spread 255 mm , stroke 60 mm , weight 4.5 kg. make: powerram model no. pm 400 or equivalent. note: the firms with past performance of the tender ed/same items subject to submission of proof of documents such as pos/r note are only eligible. [ warran ty period: 30 months after the date of delivery ]

CTN :40252519

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras purchase of spares - std self lock nut m10 , o ring , screw(r2) , gasket( plate no- c1-16-1 , sl no-3) , o ring 15.2idx5.30 cross dia , bypass seal (ispl sl no -1206) , gasket for exhaust manifold(plate-4h1176) , bush (item no-309) , bolt m10x80(plate-iii g-3) , hose clip(ms sl-193) , back nut , reflector reflex white(plate iv r-13) , spring extension (plate xxv a) , dowty seal , bolt(ispl sl-502) , buffer , mounting rear road light l s(plate viii h) , bolt m10x50 (plate xxxi p) , mounting rear road light r s(plate viii h) , lock washer (plate xxxi r) , spacer(item no-562) , bolt , strap , lock cover door lh (plate iv n) , relay charge over , cable inner(plate xi-b3) , dump switch(plate-x h-2) , radiator top hose(plate-xxviii b-14) , half clamp(ispl plate-d04) , hinge door (item no-305) , working light switch front , joint , tail lamp right side(item no-907) , glass right side quarter light(sl-378) , glass left side quarter light , seal window left hand side (plate iv p) , ignition switch , pipe fuel , door seal left hand (item no-323) , door tinted glass lower , door tinted glass lower(sl no-322) , hose (plate-xiii n-1) , mounting resilient (item no-114) , hose st pump (item no-1212) , latch assy inner rh(item no-341) , glass tinted right (plate-iv r) , door tinned glass upper(item no-321) , door tinned glass upper(item no- 338) , window tinted glass left hand side(super plate pla , hose 5 by 8 feet bsp (plate-xiii t) , rear window tinted glass (jcb super page-107) , canvas cover(ispl sl-561) , window frame left hand slide (item no-354) , door painted & sealed left hand(item no-320) , link tipping (item no-747) , windscreen front (jcb 3dx super) , liner roof assy (plate iv f) , oil pan assy twin skin (p-801) , valve main relief 227 bar (plate-xv-b) , door right side(item no-337) , valve 3rd section (plate-xv-b) , valve 1st section (plate-xv-b) , operator seat(p-109) , valve inlet (plate-xv-b) , cooler trans hydraulic oil (plate-xxviii b) , bucket 400mm (plate xxxi e) , evb super manual hydro control(11 items) , cylinder dipper (sl no-404) , bucket excavator 0.26 (plate ii-1) , plug(plate-xxxi aa-27) , cap(plate-xxxi aa-28) , valve c w adapter(plate-xxxi aa-24) , coupling(plate-xxxi aa-26) , frame outer rear window(jcb super p-105) , nut gr 1.3 by 4 inch unf (price list) , oil filter transmission(ispl sl-1504) , transfer filter , super filter drain , internal puller , ring scaling (jcb ms sl no 580) , grab sleeve , grab sleev , grab sleeve , grab sleeve , grille front(plate-iii q-1) , thrurst ring , back up tool , assembly jig , belt wrench , lift arm(plate- v a-7) , bucket tapered(plate-xxxi v-1) , washer large , bulb instrument , washer (jcb super plate xxxix c) , clip , nut(b4-4-1) , nut lock 3 by 8 unf (plate i) , screw hex 3 by 8 inch (plate-xxib) , fuse 3 amp(jcb super ix e-10) , strap check (plate iv n) , screw hex head , bolt(a1-7-4) , nut (plate xx e) , whasier 13.2 by 13.0id x 41.2 by 41.0od x 2.9 thk , 7.5 amp fuse (plate ix e) , bolt 3 by 8 unf x 3 (jcb super page xxxix sl no-245) , bolt gr-5 , 1 by 2 inch unf x 3 by 4 inch long , nut , sterring nut , set screw m10x30(plate iv v) , banjo bolt with strainer , clamp , back nut(e1-8-11 by 3) , washer hardened m10 (plate iv v) , plate clamp(e1-4-1 by 5) , nipple , bolt m10x70(plate xiii r) , bolt m 12x100mm , o-ring , clamp mid (plate xxxi g) , link 1.25 ton (plate xxxi y) , clamp , lock cover lh , shim , cap , pedal pad , nut 1-1 by 2 inch unf x 27.5 thk , knob with switch (plate xg) , o ring , switch pannel hazared , screw driver 150mm , mounting cab lower red b-post(plate-iv) , socket 3 by 4 inch a oblique f(plate-vii d-30) , micro relay change over 12v , fuel pipe (feed pump to filter) , fuel tank cap (plate iii c) , stud pre cleaner (plate-xxvi b) , joint , liner to head , 0.8mm thk , lock nut , washer , adopter 90 deg elbow (plate-xiii y-3) , stainer fuel filter (plate iii c) , mounting cab upper green b-post(plate-iv-b) , pivot pin , fuel pipe , s

CTN :40253011

31 May, 2025 NA

North 24 Paragana - West Bengal

Tender For bid to ras tender for supply of safety filter(jd mk-i plate-03) , bushing (plate-j-15) , lub fitting (ispl plate-i02) , cap screw m12 x 100 , turn indicating lamp lh(ispl plate-h03) , turn indicating lamp rh (ispl plate-h03) , washer(i01) , washer , rod (plate-i07) , flange nut(plate i-08) , stud(plate-j01) , t bolt type vacuum indicator(ispl plate-b03) , snap ring , wrench 10 (tat jd 315se mk-1 p-313 sl no-27) , tubuler spnr 12.5x21 , rod(plate -j01) , wear plate (ctlg plate-i10) , cap screw , adaptor( plate-j07) , hose clamp , rod , spanner 19x22(tool list) , hose clamp t bolt type , washer , accelerator rod , hex nut , rod(plate-j01) , rod , spnr 10x12 (tata jd 315se p-303 sl no-11) , fitting , knob , spanner 24x27mm (ojde) , rubber bellow (upper cooling water line to thermos , o ring(plate-k03) , valve(r2) , rod (plate-i08) , pin assy , adapter (ispl plate-j02) , wrench socket 2 , wire harness park break , union fitting (ispl plate-f05) , support(plate-j01) , adapter(plate-f03) , knob , push rod(r2) , spanner 24x27 mm (ojde) , rod , switch park brake(ms sl-286) , horn , flange nut , clamp (p-15) , tee fitting(p-179) , fitting (plate-j15) , wrench adjustable 305mm , jet assy , bell crank(plate-i08) , cap screw , arm service lock(plate i-06) , spacer(plate-j01) , grip with horn switch knob ctlg plate-j12) , o ring , hyd hose (ispl plate-f03) , spacer (plate-b06) , oil line (p-179) , hose assy , oil line(plate -f01) , spanner open end 18x 19 , hammer 1-1 by 2 , pin (ispl plate-i12) , spanner open end 16x 17 , pin , elbow fitting , elect temp gauge(ctlg plate-h05) , door retainer latch unit (tata jd 315v) , water reservoir , bushing , cabin harness , cutter for exhaust valve seat(smt-32) , knob(plate-j12) , switch pressure-(130psi) (price list tata jd 315v , stay rod lh & rh , hose , dial indicator , hose tank to fuel tank , pin(plate-j15) , pin (ispl plate-k03) , hyd hose (ms sl-314) , gear shaft lever switch assy , hydraulic hose , muffler extention(ispl plate-b04) , hydrolic hose (ispl plate-f01) , shaft seal , base , running disc , pedal lh (plate-j-15) , pedal rh (plate-j-15) , gauge speedometer (ispl plate-h03) , magnetic stand , hose (ispl plate-j04) , lever , knob , interior light (os sl no-407) , bar extension 2 , u ring , lever(plate-07) , tie rod end (ctlg plate-j01) , hose (ispl plate-b06) , digital hour meter (p-344) , wiper motor(ctlg plate-h02) , seal kit (p-347) , knob , tapper roller bearing (p-63) , screw joint coupling 9 by 26 inch (smt-28) , cassette ring (zf ser no 260) , tube , grab sleeve , assy hour meter(r1) , driver , assy tool box , measuring cover , indicator for transmeter , i clutch disk (ispl-old) , insert , handle set for water pump(smt-30) , piston rod s by a(315se mk-1 p-277) , atomiser assy includes 17 , 18 , 19 and 20 (ms sl-67) , steering cylinder (tata jd 315se plate j31) , cutter for 30o(smt-33) , instrument cluster , glass-4 , piston rod s a (315se mk-1 p-293) , wheel stud puller , glass-1 (tata jd 315v) , glass-6 (tata jd 315v) , glass 5(os sl no-347) , bell crank (plate-j-01) , straightedge , high pressure pump super(smt sl-10) , door glass rh & lh , fender l h (tata jd 315v) , fender (r h) (tata jd 315v) , seat(plate-g03) , entrance door(os sl no-335) , track rod , induction coil assy (ispl plate e4 , e6-7) , rear swivel door lh(os sl no-337) , rear swivel door rh(os sl no-338) , bucket tilt ldr cylinder , switch reverse control (ispl plate-c03) , single point ripper(ref-k03) , frame(i14) , wheel rim (hd) , backhoe bucket (0.09 cum)(tata jd mk-1 plate k04) , backhoe bucket(0.18 cum)-ispl plate-k05 , ditch cleaning bucket0.35 cum) , boom lock solenoid(ctlg plate-h02) , crain attachment hb crain , sliding frame(p-177) , converter (alt no from price list-15815) , converter , sliding frame with piston bushing 7 seal , gear box assy(zf p-64)

Central Government And Public Sector

CTN :40510260

09 Jun, 2025 NA

Katihar - Bihar

Tender For supply and commissioning of hydraulic trolley mounted puller cum installer of 100/70 ton ca pacity of class e & k with 7 inch touch hmi (technical spec. attached). [ warranty period: 30 months afte r the date of delivery ]

Central Government/Public Sector

CTN :40473540

06 Jun, 2025 NA

Kota - Rajasthan

Tender For supply of pilot sleeve with eye bolt suitable for hydraulic puller machine used for ctrb mounting. as per attac hed drawing no. j&t-4493, item no. 1 & 5. item should be suitable to hydraulic puller machine of sumanglam & si loman make. [ warranty period: 12 months after the date of delivery ]

Central Government/Public Sector

CTN :40475315

17 Jun, 2025 NA

Tiruchirappalli - Tamil Nadu

Tender For supply of hydraulic puller cum installer for ulc taper roller bearings of lhb coaches. details technical specification as per annexure attached [ warranty period: 30 months after the date of delivery ]

CTN :40485350

10 Jun, 2025 NA

Seraikela-Kharsawan - Jharkhand

Tender For supply of hydraulic puller complete assembly consisting of hand pump & actuator connected with hig h pressure hyd. hose 2 meter length including extension pipe. technical specification:- actuator-spring ret urn type wp-220-420kg/cm sq., barrel length (in closed position) 235mm (max.),centre hole dia.- 36 mm(m in.),stroke of actuator 75 mm (min.),material-en-19,barrel shape- solid bar or forged ingot by machining ,h orning to bore finish. hand pump- double plunger type, provided with relief valve , pressure gauge(up to 4 50bar)& release knob (easy to use)piston stroke-50mm,tank: square shape capacity 1.5 to 2.0 liters. exten sion pipe (distance piece) :-02 nos. distance piece, size of 1 piece l=300 mm (min.),od-70 mm (min.),size of another piece-l=300 mm (min),od-90 mm (min.). both will be made from simless pipe, having 3-4 mm width, of c-45 material ,edges finished at 90 degree, with a slot of 50mm x10 mm cut in one edge. connec ting hose- high pressure hyd.hose,2 mtrs. length with end fitting. make-firm's own make. [ warranty pe riod: 6 months after the date of delivery ]