Latest hydraulic crimping tool Tenders | Government hydraulic crimping tool Tenders

State Government

CTN :45626266

29 Jun, 2026 11.59 Lacs

Belonia - Tripura

Tender For - r/ mtc. of rws/jjm schemes/ s.h.: providing & fitting fixing of electrical accessories, spare of panel board of different water supply schemes at different locations under hrishyamukh rd block under dws sub-division, belonia during the year 2026-27. - providing and fitting fixing of spare contact kits without coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., providing and fitting fixing of standard operating coil (l & t make) for auto star delta starter., b) ml-2 type., c) ml-1.5 type., supplying and fitting fixing of 4 pole ac control contactor (nhd series) suitable for bch made starter (standard coil voltages are 24, 110, 220/240 & 380/415 v, ac hz)., supplying and fitting fixing of 3 pole power contractor (type-mnx) suitable for 10 hp to 25 hp motor.mnx-25 (for l&t made starter), supplying and fitting fixing of pneumatic timer pn type delay relay-electro pneumatic) suitable for delay of time upto 30 sec. (bch made)., supplying and fitting fixing electronic timer type st-100 (l & t make) suitable for 240/300/415v, 50 hz having ranges for 3-30 secs/12-120 secs., supplying and fitting fixing of single phase preventer on delay 2 sec off delay 7 sec 65 vac asymmetry., providing & supplying of kit-kat rewireable porcelain fuse (cut-out) carrier & base of havells made (delux quality)., a) 63 amps/415 volt, b) 100 amps/415 volt, supplying and fitting fixing of 3 pole power contractor (type-ml) suitable for 10 hp to 25 hp motor.type ml-2 (for l&t make starter), supplying and fitting fixing of thermal timer type gt-200 (l & t make) suitable for 230/250v, 360v, 400/440v, 50 hz for 5-18 secs., supplying and fitting fixing of thermal overload relays mn2 type (directly operated& direct mounting on mnx 9-40 contactor) of l & t made. (suitable for ml/mnx type)., a) for relay range 9-15 a., b) for relay range 14-23 a., c) for relay range 20-33 a., supplying and fitting fixing of thermal overload relays (directly operated& direct mounting on ml-2/3 contactor) having relay range 9-14a/13-21a of l & t made. (suitable for ml-2/ml-3 type)., supplying and fitting fixing of citation-m overload relays (direct mounting with built in single phase protection) having relay range of bch made., a) for relay range 8.9-13.5 a., b) for relay range 13.2-30.00 a/17.4-24.00 a., c) for relay range 22.00-30.00 a., providing and fitting fixing of 6 feet x 4 feet x 1 inch (thickness) gamair wood/ plywood pannel board for fitting fixing of electrical items, in/c 2 nos ms angle post ( size 2 inch x 2 inch x 9 feet ), nuts & bolts etc. for irrection of the same by 1:1.5:3 cement concrete casting ( 1 feet x 1 feet x 2 feet) below the ground level and painting two or more coats & plastic paint as per specification and direction of the engineer-in-charge., providing and fitting fixing 3 phase indicating lamp fiited with panel board with three different colour lamps with batten holder complete as per specification and direction of the engineer-in-charge., providing and fitting fixing heavy duty box type (resin filled) power factor correction capacitor l & t make etc. complete as per specification and direction of the engineer-in-charge.i) 5-15 kvar 440 v, supplying isi marked/ taparia make tools for water supply scheme., i) sly wrench, ii) screw driver, iii. pipe wrench, iv. plier, v. hexo frame with blade, providing and fitting fixing of moving iron type, range 0-500 v, 96 mm x 96 mm size ac volt meter ( l & t / ae make) with selector switch as a electrical instrument of the pannel board as per specification and direction of the engineer-in-charge., providing and fitting fixing of moving iron type, range 0-100/0-200 amp, 96 mm x 96 mm size ac amps meter direct reading type ( l & t / ae make) with selector switch and ct coil as a electrical instrument of the pannel board as per specification and direction of the engineerin-charge., providing and fitting fixing stee

corporations/Associations/Others

CTN :45627016

04 Jul, 2026 8.40 Lacs

Meerut - Uttar Pradesh

Tender For supply of h.s.s. cobalt tool bit 1 , h.s.s. cobalt tool bit 2 , carbide tip 1 , carbide tip 2 , carbide tip 3 , carbide tool bit 1 , carbide tool bit 2 , carbide tool bit 3 , steel file 1 , steel file 2 , steel file 3 , steel file 4 , screw driver , line tester , pipe wrench , combination pliers , grinding wheel 1 , grinding wheel 2 , angle grinder 1 , angle grinder 2 , angle grinder 3 , socket 1 , socket 2 , socket 3 , circlip plier 1 , circlip plier 2 , nose plier , hss drill bit hole saw , soldering iron , hacksow frame , air blower , d-spanner double ended , ring spanner , adjustable slide wrench 1 , adjustable slide wrench 2 , allen key 1 , allen key 2 , grinding wheel 3 , buffing wheel 1 , buffing wheel 2 , cutting wheel 1 , cutting wheel 2 , cutting wheel 3 , messchaerat grooving tools , roller grooving tool , carbide tip widia u type , carbide tip widia v type , carbide tip widia 1 , carbide tip widia 2 , hydraulic jack complete

State Government

CTN :45377341

06 Jul, 2026 NA

Multi City - Telangana

Tender For corrigendum : tggenco-nshes- supply of certain tools and plants material at nshes, nagarjuna sagar.- surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 surface plate, box type, as per the drawing enclosed. plate dimensions: 460x460 cm, plate thickness: 18 mm with 2 handles on both sides, material of construction of top surface plate: cast iron made of precision grinding and lapping confirming to is 2285-2003 yes, master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 master level, sensitivity: 0.02 mm/m, length-200mm, width-40mm , make: insize, model: 4902-200 yes, hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 hydraulic trolley of 2.5 ton capacity, make: stanley, style: cpt-25 yes, feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s feeler gauge, measurement range: 0.05mm to 0.8mm, blade length: 100mm, no. of blades: 10, make: mitutoyo, model: 184-306s yes, barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) barrel hand pump, for oil barrel, hand operated heavy duty rotary barrel pump for liquid transfer from a standard barrel size of 210l with inbuilt inlet strainer, body material: cast iron/ stainless steel, suction tube length: 1090 mm(min), discharge: 0.25l/rotation(min) yes, hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re hand drilling machine, size-1/2 inch, 600 watt, make: bosch, model: gbm13re yes, grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 grinding machine ag4 portable, wheel dia:100mm, make: bosch, model: gws 750-100 yes, hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 hydraulic jack set with ram, hand pump, hose with nrv, gauge, capacity:100ton, storke:2 inch, make: enerpac and model: rcs-1002/ make: power team and model:rss-1002 yes, cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h cordless m10-m24 battery driven impact wrench with full kit including batteries, make: bosch, model: gds 18v-1050 h yes, corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 corded electric rotary hammer with sds plus, make: bosch, model: pro gbh 220 yes, crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 crimping tool, electric, corded, 120kn, 25 to 400 sq.mm, make: jainson, model: bijlee 400 yes, bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia bench vice, opening x width:190x150mm, bvsgm8, 27-29kg , make: stanley/taparia yes, 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g 1/4 inch + 1/2 inch square drive ratchet set 57-piece set with carrying case make: bosch, model: 1600a02z9g yes, motorised barrel pump 0.5 hp, 350 watts / single phasein built on- off switchmaximum discharge flow: 60-70 lpm, discharge pressure: 10 m water columnsuitable for 200-210 ltr barrel /50 ltr cansmaterial: stainless steel 316, pump tube length: 1250 mmsuction tube size: 44 mm diasuction tube length: 1250 mm, outlet size: 1 inch dia motorised barrel pump 0.5 hp, 350 watts / single phase in built on- off switch maximum discharge flow: 60-70 lpm, discharge pressure: 10 m water column suitable for 200-210 ltr barrel /50 ltr cans material: stainless steel 316, pump tube length: 1250 mm suction tube size: 44 mm dia suct

CTN :45175993

22 Jun, 2026 NA

Jammu - Jammu And Kashmir

Tender For bid to ras supply of supply of offrs jcos living shelter , details of electrical items , house service bracket , switch piano type 5a 230 volt , socket 5 oblique 6 a 5 pin 230 volts , switch piano type 15a 230 volts , socket 15 oblique 16a 5 pin 230 volts , led panel ceilling light , led tube light fitting , led lamp 14 watt conforming to is 9405 , ceiling fan complete , instantaneous electric water heater , heavy duty exhaust fan 250 mm , bulk head fitting 18 watt led , pvc ceiling rose 3 terminal 230 volts , batten angle holder 230 volts , pvc square block mounting of celling rose , pvc rectangular block for mounting switches , cadmium plated machined screw , 1100 v grade fr pvc insulated and copper conductor , 1100 v grade fr pvc insulated multistranded copper , pvc casing and capping of size 25 mm , pvc t junction box for pvc casing caping , elbow pvc for casing and caping , pvc conduit non mettallic 20 mm dia , sheet metal enclosure spn db , mcb spn 32 amp 230 volts , mcb sp 10 amp 230 volts , mcb sp 6 amp 230 volts , 1100 v grade frpvc insulated and sheathed 3 core , 32 amp on load change over switch , insulation tape 19mm wide , flexible pipe 1 inch is marked , one earthing set per shelter , prefabricated gel earthing electrode of pipe , looking mirror with plastic decorative frame , cp cloth hook with six hooks , ms hook for ceiling fan , zebra blind made of wooden colour fabrics over window , curtain oblique drapery rod , supply of wpc , septic tank cover , soakage pit cover , man hole cover , non skid floor tiles , double charged vitrified ceramic floor tiles , dado anti skid coloured floor tiles , white cement , hydraulic door closer complete , powder type fire extinguisher of 1 kg capacity , gun for silicon gel , silicon gel , paint brush 4 inch , paint brush 2 inch , non asbestos fibre cement designer board , rotational moulded polyethylene water storage tanks , gi nipple 150 mm long 20mm dia , gi tank niple 20 mm dia , gi socket 20 mm dia , gate valve brass 20 mm dia , float valve pvc 20mm , water tank staging with accessories , gi pipe 20mm dia , gi socket 20mm dia , gi elbow , gi union 20mm , gi reducer socket , gi t 20 mm dia , gi nipple 20 mm dia , gi 15 mm dia , gi socket 15 mm dia , gi union 15 mm dia , gi elbow 15 mm dia , gi t20 15 mm dia , gi t equal 15 mm dia , gi nipple 15 mm dia 75mm long , gi nipple 15 mm dia 50mm long , cotton thread , safeda , chromium plated stop valve , chromium plated shower rose of 125mm dia , fancy type chromium plated bib tap , fancy type chromium plated long body , fancy type chromium plated two way angle wall , clamps for fixing gi pipes 15 mm , vitreous china whb alongwith accessories , toilet paper holder , vitreous china ewc white colour , cp shower rose , pvc low level flushing cistern , cabinet mirror , cp towel rail , double soap dish chromium plated , 75mm pvc vent pipe with cowl , pvc connection pipe , pvc waste pipe , bathroom cabinat , health faucet abs body , water pressure pump , stainless steel sink , sewage connection with accessories , pvc swr bends and tee 75mm , pvc swr bends and tee 110 mm , pvc swr floor trap , chromium plated grating , pvc branch piece 110mm bore , pvc swr pipe 75mm , steel locker , wooden bed queen size , plastic chair with cushion , ms shoe rack , wooden table , ms equal angel for cloth drying fixtures , galvanised iron wire , erection tools with complete accessories //bid details 2 / 67

CTN :45619743

25 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, boxnhsm1, bobrnm1, boxnm1 & bcnm1 wagons no as following: [1] ser 25079661921 boxnr [2] ser 12079660030 boxnhsm1 [3] er 72029662262 bobrnm1 [4] ser 25079763045 boxnr [5] ser 25079763397 boxnr [6] ser 10079734539 boxnm1 [7] ser 25079662201 boxnr [8] er 30029021489 bcnm1 [9] cr 30019141180 bcnm1 [10] scr 10099632976 boxnm1 condition:-[1].the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (105.450 mt) is the lot quantity (105.450 mt) as mentioned in the catalogue.[2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnhsm1, boxnm1, & bcnm1 wagons : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bobrnm1 : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, dom cylinder, square shaft with bush, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, lsd, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. "

CTN :45619744

25 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned boxnr, boxnhl, boxnm1, boxnlwm2, boxnrm2, bvzc & bcnm1 wagons no as following: [1] ser 25079460739 boxnr [2] ecr 22100982925 boxnhl [3] scr 10099661570 boxnm1 [4] ecor 14120827393 boxnlwm2 [5] er 10029660857 boxnm1 [6] er 10029660321 boxnm1 [7] ser 10079673425 boxnm1 [8] cr 25019600720 boxnrm2 [9] nr 85039660081 bvzc [10] scr 30098961266 bcnm1 condition:-[1]. the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (103.650 mt) is the lot quantity (103.650 mt) as mentioned in the catalogue.[2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for boxnr, boxnhl, boxnm1, boxnlwm2, boxnrm2 & bcnm1 wagons : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bvzc wagon : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

CTN :45619745

25 Jun, 2026 NA

Jamalpur - Bihar

Tender For auction sale of rolling stock - scrap iron and steel cut up parts of condemned bcnm1, boxnm1, boxnlw & bvzc wagons no as following: [1] ser 30078964522 bcnm1 [2] nr 30039016437 bcnm1 [3] scr 10099664175 boxnm1 [4] wcr 14160651309 boxnlw [5] ser 10079662429 boxnm1 [6] special repair 85069757454 bvzc [7] special repair 85060260045 bvzc condition:-[1]. the wagon is sold on number basis however delivery shall be given on actual weighment basis at the time of delivery. the lot weight mentioned in the catalogue is on approximate basis.the maximum permissible deliverable quantity (78.090 mt) is the lot quantity (78.090 mt) as mentioned in the catalogue.[2]. the weighment of the material shall be carried out at ssy/jmpw weighbridge . [3]. if the actual quantity found at the time of delivery is less than the estimated/sold quantity, no claim for shortage, refund or proportionate return of sale value shall be entertained.[4]. if the actual quantity found at the time of delivery is more than the estimated/sold quantity, the excess material shall not be delivered to the purchaser and shall be retained/returned to the custodian.[5]. no dispute regarding variation in weight shall be entertained after e-auction sale. [6]. before bidding, bidders are advised to inspect and tally every details of the lot as appearing in catalogue which is published in ireps portal with the actual material in ground. no complaints/claim by the purchaser will be entertained in this regards after e-auction sale.[7] cutting is allowed for loading facilities only. [8] cutting time of sold wagons of jmpw/dhobighat would be 08.00 hrs. to 16.00 hrs. on weekdays and 08.00 hrs. to 12.00 hrs. on saturday. purchaser, their labours or any other staff will not be allowed to remain at dhobighat area beyond the scheduled working hour. the purchaser may, however, be allowed to keep their watchman to guard their material. no cutting tools will be allowed inside dhobighat area on sunday and other holidays. [9] to be sold without all available excluded fittings as follows:- (i) for bcnm1, boxnm1 & boxnlw wagons : bogie (except 22w & 22wm), wheel set with ctrb, brake cylinder, draft gear, coupler body, yoke & yoke pin, distributer valve, yoke supporting plate, yoke pin supporting plate, all sorts of bolster springs, slack adjuster, hand brake wheel, knuckle, anchor plate with safety plate, apm, brake beam complete for casnub bogie, equalising lever with bushes, bogie brake push rod.as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024. (ii) for bvzc wagon : wheel set with rb and axle box, brake cylinder, distributer valve, draft gear, coupler body, yoke & yoke pin as per list of excluded fittings of wagon letter no. mc/300/pt-xx kolkata dated 10.04.2024

corporations/Associations/Others

CTN :45612146

30 Jun, 2026 NA

Delhi - Delhi

Tender For auction sale of high quality steel scrap,iron scrap,mild steel scrap,mt component,rubber scrap,sort canvas,tank solid steel scrap,tools scrap

corporations/Associations/Others

CTN :45612148

30 Jun, 2026 NA

Delhi - Delhi

Tender For auction sale of tank solid steel scrap,mt component,iron scrap,tools scrap,sort tyre with wheel drum,brass scrap,aluminium scrap,cable scrap,rubber scrap,mild steel scrap,mixed metal scrap

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Hydraulic Crimping Tool Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

corporations/Associations/Others

State Government

corporations/Associations/Others

corporations/Associations/Others

State Government