Latest hydraulic cutter scrap Tenders | Government hydraulic cutter scrap Tenders

CTN :38813580

21 Jun, 2025 NA

Panchkula - Haryana

Tender For bid to ras supply of apparatus oxygen inhalation portable tubing 1 meter with connector for , medium and high concentration oxygen seethrough masks pvc with 7 ft. oxygen supply tubing paediatric , tube endotracheal armoured stylet od 2.0 mm length 225 mm , tube endotracheal pvc reinforced intubation stylet introducer for size small medium and large , synthetic absorbable polygalactin 910 polyglycolic acid coated with polycaprolate size 1 0 70 90 cm 1 2 circle reverse cutting 30 40 mm , braided polyglactin 910 polyglycolic acid coated with polycaprolate size 2 0 70 90 cms 1 2 circle round bodied 30 40 mm box of 12 , naso gastric tube adult 100 cm long 14g , naso gastric tube adult 100 cm long 20 g , marker water proof , extension tubing with three way stop cock 10 cms in length clear soft and kink resistent extension tubing three way connector at one end and male luer lock at other end rotating luer lock , sodium chloride solution isotonic in nontoxic disposable plastic bottle of 500ml ffs , normal saline 1000ml self collapsible pressure having seprate adm port with recessed membrane and plastic sterility barrier self ceiling inj port no air vent required , laryngeal mask airway size 1 , lma supreme size 3 , lma supreme size 4 , nasopharyngeal air way size 12 internal dia 2.5 mm outer dia 4mm , nasopharyngeal air way size 14 internal dia 3 mm outer dia 4.7mm , nasopharyngeal air way size 16 internal dia 3.5 mm outer dia 5.3mm , steristrips box of 50 , super absorbant ot table sheet 2.5 mtr 1.5 mtr , ambu a scope 3 the flexible videoscope large , ambu a scope 3 the flexible videoscope regular , ambu a scope 3 the flexible videoscope ultra slim , anaesthetic kit sms material apron 01 cap 01 mask 01 spinal drape 01 swab 01 pack of five galipot with tray 01 plastic forcep 01 , polypropylene 1 2 circle reverse cutting heavy 45 mm length 100 cm size 1 pack of 12 box , abdominal drain kit sterile having drainage catheter and collection bag 2000 ml graduated bag soft drainage catheter 20 fr 50 cm long with radiopaque line with markings at 2 cm interval , abdominal drain kit sterile having drainage catheter and collection bag 2000 ml graduated bag soft drainage catheter 24 fr 50 cm long with radiopaque line with markings at 2 cm interval , adhesive silk tape 10 cm x 9.1 m , adhesive silk tape 1.25 cm x 9.1 mtr e.g , adhesive silk tape 2.5 cm x 9.1 m e.g , disposable sterile ultrasound transducer cover , endotracheal tube with sub glottic suction device size 7.5 mm id cuffed with murphy eye smoothly finished tube tip and walls radiopaque line throughout the tube high volume , endotracheal tube with sub glottic suction device size 8.0 mm id cuffed with murphy eye smoothly finished tube tip and walls radiopaque line throughout the tube high volume , endotracheal tube with sub glottic suction device size 8.5 mm id cuffed with murphy eye smoothly finished tube tip and walls radiopaque line throughout the tube high volume , gauze swab with bleached gauze cloth ep 17 with non fraying edges 17 25 tex packed in autoclavable sterilization pouch with steam indicators ready to sterile 5 cm x 5 cm 8 plies pack of 10 , gauze swab with bleached gauze cloth ep 17 with non fraying edges 17 25 tex packed in autoclavable sterilization pouch with steam indicators 10 cm x 10 cm 8 plies pkt of 10 , no 3 0 monofilament polydioxanone pds suture violet length 70 80cm 1 2 circle 30 40mm round bodied needle box of 12 , no 4 0 monofilament polydioxanone pds suture violet length 70 80cm 1 2 circle 20 25mm round bodied needle box of 12 , no 5 0 monofilament polydioxanone pds suture violet length 40 50cm 15 20mm 1 2 circle round body needle , non siliconised foleys urinary catheter 2way 14 f with colour coding at balloon end , polyamide monofilament size 1 100 cm 1 2 circle 40 mm

Central Government/Public Sector

CTN :40746664

08 Jul, 2025 49.00 Lacs

Jammu - Jammu And Kashmir

Tender For periodical services(internal) including repairs to flooring,sanitary and plumbing items works in otm and md accn at ridge, raulki area under age b/r-i of ge satwari - notes : (1) work will be carried out upto 4th storey of bldgs and quoted rates of items shall be deemed to include the cost of necessary formwok and scaffolding required as per site conditions., taking down shutters of any description exc 1.00 sqm and not exc 2.00 sqm each and removing from the site complete all as specified & directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) n. exc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., taking down chowkats or frames with shutter (without taking off shutter from the frame) exc 1.5 sqm & n. exc 4 sqm each including cutting holes for taking out hold fast or dismantling brick work and removing from site complete all as specified and directed., demolition of cement concrete (un-reinforced) in ground floor to 4th floor and pavings n exc 15 cm thickness (below or above ground level ) and removing the rubbish from the work site to out side defence premises complete all as specified and directed., demolition of concrete (reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed., taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubing down with water etc and removing unserviceable material outside defence land complete all as specified and directed., dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed, s&f pressed steel frames of size 125mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f pressed steel frames of size 105mm x 60 mm made out of size 1.25 mm thick ms sheet for doors with one or more rebates including mild steel hinges, 100 mm long , medium weright and 25 mm x 3 mm flat iron as in hold fast , tie bar including necessary fixing lugs, lock strike plate and fixing arrangement and making good the disturbed surfaces in cement mortar 1:3 or cement concete 1:2:4 type b-1 including pcc 1:3:6 type c1 as in back fill to chowkats complete all as specified and directed., s&f 35 mm thick factory made 2nd class hard wood, plain, framed, panelled shutters (two panels) with lock rail and panel of 9mm thick bwp commercial plywood .the size of rail and stiles as per is: 1003(part-1), kiln seasoned and chemically pressure treated, fitted to chowkats complete all as specified and directed., s&f factory made 35 mm thick 2nd class hard wood, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters as specified in ssr part i, section 8, clause 8.24 (a); fitted to chowkats complete all as specified and directed, m&l for 30mm thick factory made flush shutters, solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed., s&f in repair solid pvc door frame of size 50mm x47mm made out of 5mm plain colour pvc sheet reinforced with mild steel square tube, supplying and fixing in opening as per specifi

CTN :40067578

26 Jun, 2025 NA

Medak-T - Telangana

Tender For corrigendum : supply of painting brush flat size: 25mm with bristle: protrusion 44mm &oal 57mm min handle: oal 155mm dia18mm fe , m2(hss) equal angle cutteras per is: 6326-1971. dia 80mm x bore 22mm x width 16mm x including angle , m2 (hss) taper shank twist drill, as per is: 5103-1969 dia: 3.0mm flute length: 33mm, oal: 104mm , milling insert to apkt 1705 per-sm positive chip splitter inserts with two helical cutting edges to

CTN :40478137

23 Jun, 2025 NA

Kolkata - West Bengal

Tender For corrigendum : supply of 7.30 mm long high depth cut max-7 mm, trigonal insert with 6 helical cutting edges for 90 deg. shoul

CTN :40724472

20 Jun, 2025 NA

Gorakhpur - Haryana

Tender For supply of solid tungsten carbide flat drill bit, size- 17.5 mm taper shank. technical detail s:- right cutting, helix angle-20 degree , flat drill bit- 180 degree, 2 cutting edges. make- wi dia/kenna metal or equivalent [ warranty period: 30 months after the date of delivery ]

CTN :40701612

20 Jun, 2025 NA

Howrah - West Bengal

Tender For supply of neutral insert with 8 cutting edges. drawing no.: m/s sandvik's part no. lnu x-191940-pm 4215 or m/s widia's part no. lnux 191940 db-tn2000 or m/s. ceratizit part no. lnux 191940-sn-r74 grade ctcp125. material and specification: as per drawing/part no. w arranty: as per irs conditions of contract. [ warranty period: 30 months after the date of d elivery ]

Central Government/Public Sector

CTN :40669232

01 Jul, 2025 29.94 Lacs

Ratnagiri - Maharashtra

Tender For cleaning cutting of grass wild vegetation from area of runway scraping both side of runway edges 3.00m from runway edges certain miscellaneous work at icgas ratnagiri

Central Government/Public Sector

CTN :40640516

27 Jun, 2025 NA

Angul - Odisha

Tender For supply of cutting edges for motor grader 25125 d d - edgeone to one part no452wa11954 , boltone to one part no452wa11987 , boltone to one part no452wa11995 , boltone to one part no452wa12001 , nutone to one part no452wa11168 , washerone to one part nocfw0520060 , bit endone to one part no452wa11979

CTN :40611275

26 Jun, 2025 NA

Kalpakkam - Tamil Nadu

Tender For supply of indexable 45 degree face milling cutters carrying square inserts as per bis 6462-2011 , supply of square inserts with four cutting edges to suit the above 45 degree face milling cutters

Hydraulic Cutter Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector