Latest hydraulic lifting system Tenders | Government hydraulic lifting system Tenders

corporations/Associations/Others

CTN :40126145

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

corporations/Associations/Others

CTN :40126147

05 May, 2025 2.62 Lacs

Pimpri - Maharashtra

Tender For 22/2025-26 purchase of laqshya instruments - purchase of instruments ( laqshay), radiant warmer- technical specification of radiant warmer with baby bassinet a radiant warmer is used to keep the patient s core temperature stable at 37 o c. it should be microprocessor controlled radiant warmer with manual and servo options. it should have facility to display both skin and air (ambient) temperature separately.. it should have audiovisual alarm facility for overheating beyond set temperature range. it should have alarm facility for patient temperature less than or greater than the required temperature i.e. above or below the set range. it should rotate and swivel in different direction, so as to allow taking x-ray. the light should be dazzle free. it should have alarm for power failure. it should have alarm for heater failure and auto cut off for high temp. it should have alarm for probe failure. it should have time out alarm in manual mode. it should have facility to auto reset the system in case of hang up caused by power fluctuation. it should have manual setting for high and low alarm setting. in servo mode, the heater output should be controlled to maintain the baby at the required set temperature. in manual mode, the heater output should be directly controlled by a setting on the front panel should have a facility to lock the keyboard to avoid unwanted user. the desired temperature range from 25 to 40 degree c. the resolution should be 0.1 degree c halogen based observation light should be provided for observing the baby. it should be mounted on a pole with sturdy base with lockable castors power supply: power input to be 220-240 vac, 50hz fitted with indian plug. certificate of calibration and inspection from the factory. warranty: comprehensive warranty for 5 years after warranty documentation: user, technical, maintenance manuals to be supplied ce, iso certified , fetal doppler - technical specification of fetal doppler should be compact, table type and light weight. large lcd display for display of fetal heart rate. back light for better visibility display signal quality, low battery, etc., high sensitivity doppler probe of frequency 2.0 mhz ultra sound intensity 10mw/cm2. built-in speaker with output not less than 1.0w should work on rechargeable batteries with minimum battery time of 300minutes. battery charger and spare set of batteries aa type to be supplied. volume control facility and audio output for ear phone should be available. heart rate range should be from 50 to 240 b pm with accuracy of + /-2% should be water proof body. should have facility for fhr data transfer to pc. doppler probe should be light weight with holder facility when not in use. should be supplied with carrying case. machine should be iso mark, baby digital thermometer - technical specification of baby digital thermometer range 0.1 to 1000 degree centigrade measurement mode- min, max, average, differential, dual temperaturereading measurement unit- degree centigrade, degree fahrenheit,kelvin temperature probe with connecting cable relative humidity10 to 90% rh non-condensing ip rating- ip 40 g) probe response time 2-3 seconds it should be who & unicef standards, delivery trolley/patient stretcher trolley- technical specification of patient stretcher trolley overall size: 1905mm l x 710mm w x 660mm to 910 mm h. stretcher dimension 1830 mm l x 555 mm w. two section top. height adjusted by foot operated maintenance free hydraulic pump. height adjustment shall be obtained by hydraulically operated mono block type linear actuator pump foot operated actuation having stroke of 140 +/- 5 mm, push force 10 kn at 270 bars, number of complete pump stroke 22 to 24 for full stroke length x-ray permeable removable stretcher, backrest raised on ratchet. quick trendelenburg as well as reverse trendelenburg positions shall be provided with easily accessible operating handle provided with two gas springs for easy action. s.s. saline rod with 12 mm dia s.s

Central Government/Public Sector

CTN :39113951

26 Apr, 2025 NA

Angul - Odisha

Tender For bid to ras bid to ras corrigendum : supply of 2x660 mw talcher workshop equipment - vertical turret lathe machine , heavy duty lathe machine , medium duty lathe machine 1 , medium duty lathe machine 2 , universal milling machine , surface grinding machine , cylindrical grinding machine , slotting machine machine , radial drill machine , column drill machine , hydraulic press machine , plate bending machine , plate shearing machine , dynamic balancing , shaper machine , pipe bending machine , tool and cutter grinding machine , power hacksaw machine , welding generator , welding transformer machine , battery operated trolley , gas cutting and heating equipment , supervision of assembly, erection and commissioning -total lump sum prices for visits , supervision of assembly, erection and commissioning -total lump sum prices for supervision of assembly erection and commisioning etc.

CTN :39722445

03 May, 2025 NA

Kalyani - West Bengal

Tender For corrigendum : supply of rectification of guide plate, overhauling, matching of brass guide plates of 150ton press machine. as p , supply of new power pack unit, power pack unit compatiable with hydraulic cylinder of press machine. a , supply of electrical panel (plc) , electrical panel for the operation of press machine. as per attached , installation & commissioning of the total machine (after repairing) , as per attached specifications , repairing of hydraulic cylinder of press machine, conversion of existing single acting cylinder to do

CTN :39643331

02 May, 2025 NA

Shimla - Himachal Pradesh

Tender For corrigendum : procurement of machinery and equipment on behalf of directorate of health services hp - cardiac monitor, high pressure high speed horizontal steam instrument sterilizer, phacoemulsification unit, fess endoscopy unit, ent operating microscope, oae(clinical), ent workstations /treatment unit, shaver system cum micro drill, digital mammography unit, analogue mammography machine, computed radiography system for mammography, electro hydraulic operation table for orthopaedic surgery, surgical instrument set (ortho), autopsy(mortuary)table, mortuary cabinet (6- body), laparoscopic set with instruments, ctg machine, delivery table(obstetric labour table), foetal doppler, multipara monitor (obg), video colposcope, suction apparatus, autoclave horizontal, autoclave vertical, autoclave ot automatic, multi-channel electrocardiographic, fogging machine for ot (fumigator), crash cart trolley, infusion pump, retinoscope, indirect ophthalmoscope, electric cautery, laryngo-laryngoscope, digital otoscope, head light(ent), power drill for ortho, power saw for ortho, harmonic scalpel, laparotomy set, single puncture laparoscope for tubal ligation, spot light, note :-1.the basic price of the goods to be quoted without gst.2.all the prices should be quoted in indian rupee (inr) only.3.the cmc should be quoted year wise without gst.4.cmc rate and turnkey work (if any) shall be included for determining l-1 bidder.5.gst shall be payable as applicable from time to time.6.charges towards packing & forwarding, inland transportation, insurance (local transportation and storage) would be borne by the supplier from warehouse to the consignee site, loading/unloading and other local costs incidental to delivery of the goods to their final destination as per section-i shall also be borne by the supplier.7.the price should be inclusive of supply, installation, commissioning charges.8.l-1 will be determined item-wise on total basic price of the equipment (all inclusive) (excluding gst) + total cmc (if any) (excluding gst) + turnkey work (if any) (excluding gst) for all the items as mentioned in section-i.9.in case of optional accessories/items (if any), rates may quoted in separate pdf file (along with the price bid), which will not be considered for determining l-1 bidder. it is reiterated that the bidder should not submit this in the technical bid.it is certified that the cost of goods shown above, is all inclusive except gst.signature of authorizedsignatory with seal

CTN :39809829

30 Apr, 2025 NA

Khorda - Odisha

Tender For corrigendum : supply of power stone carving set- chisels , craft knives , gas kiln , latex backing , dehusking machine , spinning machine , steam ironing unit , dry-cleaning machine with supporting chemicals , spotting machine -stain removing machine , cloth hanger trolley , steam iron press , chemicals for dry cleaning machine - perchlorothethylen , chemicals for spot removing machine bleach, detergent , sewing kit , tumbler dryer , tagging gun , electric shearing tools , air hydraulic riveter , hand polishing machine , cleaning liquid , leather apron , hydraulic forging machine , computerized key cutting machine

Central Government/Public Sector

CTN :40107316

27 May, 2025 NA

Ajmer - Rajasthan

Tender For supply, installation and commissiong of triple compression hydraulic iron scrap bailing press machine with cap. 60 to 80 kgs., bail size 15-20 x 15"-20" x 15"-20", power 30 hp with production capacity of 10-20 bails per hour. as per attached technical specification [ warranty period: 30 months after the da te of delivery ]

Central Government/Public Sector

CTN :40077835

12 May, 2025 NA

Bhopal - Madhya Pradesh

Tender For supply of workshop equipments - liniversal vices for bench mounting, jaws width 120 mm, jaws depth 120 mm. , electronic tool kit (consisting of mini-pliens, mini-screw drivers, etc.). , soldering irons, 15w, 35w and 60w (no. of each) , cable-shou prossing pliers sets, 1.5 mame to 10 mins , spirit levels (300 mm). , hydraulic crimping machine for crimping all sizes of power cables. (manual hand hydraulic operated type portable crimping tool with safety system suitable for crimping copper alloy or bitemallic hags of cable sizes 50 sq.mm, 70 sq.mm, 95 sq.mm. 300 sqmm. & 400 sq.mm, complete with all accessories (eg. male female dies of required sizes etc.) , reference and warming phanes (white letters and red background), operating instruction plates and first aid information plates , l.v. panel short-circuiting device 25 m cu conductor, , voltage testers 500 v. , short fliled nylon headed maillers , measuring tapes of at least 5 m measuring length , steel scales of 300 mm measuring length.

CTN :40049441

23 Apr, 2025 NA

Krishnanagar - West Bengal

Tender For supplying of wooden items for the newly renovated suit rooms at new circuit house, nadia - supply, fitting & fixing including transportation charges of the king-size bed (6x7) with the following specifications: a) made from high-quality durable cp solid teak wood b) hydraulic lifting system for under-bed storage with drawers on both sides c) solid wood slats for optimal mattress support with a back support of 4ft height d) polished finish (pu) for refined look and safety standards e) includes two side tables of the same material for storage and aesthetic appeal , supply, fitting & fixing including transportation charges of cupboard with the following specifications: a) made of premium-quality teak wood (cp segun) b) dimensions: 3.0 ft width x 2.5 ft height x 1.50 ftlength c) multiple shelves and smooth, sturdy doors with quality hinges d) treated and polished wood for durability and finish e) stable structure for long-lasting use , supply, fitting & fixing including transportation charges of dressing table with the following specifications: a) crafted from high-quality cp solid teak wood (cp segun) b) dimensions: 6 ft length x 2.5 ft width x 1.25 ft length c) large mirror and multiple drawers for organized storage d) polished smooth finish for durability and refined look , supply, fitting & fixing including transportation charges of almirah with the following specifications: a) made from premium-quality teak wood (cp segun) b) dimensions: 6 ft height x 4.5 ft width x 1.75ft length c) multiple shelves and hanging rods for clothes, sturdy doors with secure locks d) treated and polished wood for finish and durability e) strong structure ensuring long-lasting stability , supply, fitting & fixing including transportation charges of tea table with the following specifications: a) made from high-quality teak wood (cp segun) b) dimensions: 2.5 ft height x 4.5 ft length x 1.75 ftwidth c) includes both closed and open storage zones d) treated and polished (pu) for durability and wear resistance , supply, fitting & fixing including transportation charges of tv showcase with the following specifications: a) crafted from premium cp solid teak wood b) dimensions: 2.5 ft height x 5.5 ft length x 1.75 ftwidth c) includes both open and closed storage zones d) polished (pu) wood finish for refined look and long-lasting performance , supply, fitting & fixing including transportation charges of cp solid teak wooden study table with chair with the following specifications: a) classic vintage design with detailed craftsmanship b) table dimensions: 48 inches width, 24 inches depth, 30 inches height c) hutch with open shelves and drawers for document organization d) paired with a sturdy wooden chair (cp segun)of 18 inches seat height

CTN :39038230

01 May, 2025 12.13 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of goods, tools & equipmentforan international standard itot in fitter tradeat iti tarsali, gujarat, india (package 4: fitter trade) - ss and sc center lathe (all geared) , design, supply, installation, commissioning, testing and training of hydraulic / electro-hydraulic/ analysis and control of hydraulics. , design, supply, installation, commissioning, testing and training of pneumatic / electro-pneumatic/ analysis and control of pneumatic. , design, supply, installation, commissioning, testing and training of advance factory automation training kits , application learning systems , hydraulic power saw machine , cnc turn centre , universal milling machine with minimum specification , vertical milling machine , cnc machining centre , cnc milling tools to suit above machine (sl. no. 187): to accommodate face cutter, shell end mill cutter, taper shank and parallel shank drills/cutters, reamers. taps with suitable tool holders. , surface grinding machine , universal tool and cutter grinding machine , interchangeable ratchet socket set , hand reamer adjustable cover , hand reamer taper , reamer parallel , set combination , micrometer (0-25) , micrometer (25-50) , micrometer (50-75) , micrometer inside (0-25) , vernier calliper (150mm) , vernier height gauges , vernier bevel protractor , drill twist taper shank , drill chuck , wheel dresser , machine vice (4 inch) , machine vice (6 inch) , sleeve drill morse , bench vice , leg vice , dial test indicator , lathe tools hss tipped set , lathe tools bit hss , counter boring and counter sinking tool , arm strong type bit holder rh , arm strong type bit holder lh , arm strong type bit holder straight , straight edge , surface plate , marking table , universal scribing block , v- block pair , square adjustable , angle plate , spirit level , portable hand drill (electric) , twist drill straight shank , twist drill straight shank , taps and dies complete set , taps and dies complete set , taps and dies complete set in box , pipe wrench , pipe wrench , pipe vice , adjustable pipe tap set bsp with die set cover pipe size , wheel dresser(1for4units) , machine vice , machine vice , sleeve drill (morse taper) , bench vice , leg vice , gauge slip as johnson metric set , carbide wear block , gauge snaps , gauge plug single ended , gauge telescopic , dial vernier caliper , vernier micrometer , depth micrometer , vernier caliper , comparators stand with dial indicator , surface roughness comparison plates , digital vernier caliper , digital outside micrometer , digital dial test indicator , hardness tester , flat tongs , round tongs , straight snips , bend snips , solder bit /soldering iron hatchet type , anvil , swage block , trammel , hand groover , portable forge with hand blower , gas cutting torch with different noses , arc welding table with positioner , gas welding table with fire bricks , grinding attachment for lathe , dial test indicator , sine bar , sine bar , micron suitable to measure minimum 300mm distance. (optional) , surface roughness tester , air conditioner , drilling machine pillar type with drill chuck & key. , pedestal grinder double end type. , power saw machine stroke length160 mm , fly press 4t capacity , arc welding transformer-single phase,200 amps. (with cable, electrode holder and all other accessories) , oxy-acetylene gas welding plant with all accessories , tig welding machine , co-ordinate measuring machine having accuracy of 5 , workbench , special tools and equipment , tool holder to suit the cnc machine (sl. no. 183) for turning, threading (external &internal), grooving (external &internal), parting off operations, drilling, boring, undercutting (with 20 inserts for each operation) , worktable to mount small machines , worktable to mount small machines , worktable to mount small machines , work benches with bench vices , dg set (power backup) , engineering drawing trainees tool kit , air conditioning for classroom , air conditio

Hydraulic Lifting System Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

corporations/Associations/Others

corporations/Associations/Others

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector