Latest hydraulic oil pump Tenders | Government hydraulic oil pump Tenders

State Government

CTN :45366563

05 Jun, 2026 NA

Delhi - Delhi

Tender For procurement of acbs and other auxiliary spares of lnt make at sayyed nangloi sewage pumping station. (reinvited) - procurement of air circuit breaker (acb), 3 pole, 415v, breaking capacity-60ka, current rating capacity 2500 amp, edo type with microprocessor release. make: lauritz kundsen (l&t), procurement of air circuit breaker (acb), 3 pole, 415v, breaking capacity-50ka, current rating capacity 1250 amp, edo type with microprocessor release. make: lauritz kundsen (l&t), procurement of under voltage release 240v ac make: lauritz kundsen (l&t), breaker control switches (trip - neutral - close) make: lauritz kundsen (l&t)

Central Government/Public Sector

CTN :45263257

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply of uhv deposition chamber - uhv chamber specification (vacuum better than 2 10-9 mbar uhv) chamber overview spherical (diameter 14 ) or equivalent square shaped uhv chamber with support frame equipped with three (3) x 2-inch magnetron sputtering sources. all cf flanges and uhv viewports/ss blanks, three (3) x 2-inch magnetron sputtering sources. each sputtering source has an individual gas inlet line for process gases. all cf flanges., substrate holder : diameter: 2 inches; heating molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature to 1000 c without rotation. rotation: substrate holder can rotate continuously, driven by a stepper motor. variable speed from 0 to 10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to the substrate surface, tilt adjustable. two sputtering sources mounted confocally at an angle relative to the substrate. base pressure: lower than 2 10 mbar (ultra-high vacuum)., vacuum pumping system: turbo molecular pump: pfeiffer hipace300 / edwards next 300 / leybold turbovac 350i with cf100 flange or equivalent with integrated controller, ion pump with controller: included to maintain uhv vacuum levels and provide clean pumping., backing pump: pfeiffer hiscroll 12 / edwards nxds 15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves : one cf100 and one cf150 manual gate valves for isolating the chamber from the pumping systems as well as throttling, vacuum gauges and measurement: one cold cathode gauge with readout capable of measuring vacuum pressures down to1 10-10 mbar for precise uhv monitoring., one capacitance manometer gauge with measurement range from 1 10-1 to 1 10 mbar for accurate pressure reading during deposition phase, gas delivery system: two independent mass flow controllers (mfcs):a. one mfc (0-100 sccm) for argon gas feeding to all three sputtering sources via high vacuum valves.b. one mfc (0-100 sccm) for nitrogen gas feeding directly into the chamber with its own high vacuum valve.gas lines for ar and n2 are physically separated to avoid cross-contamination., chamber access and viewports: 1. two view ports installed on the chamber, each equipped with manual shutters. 2. access ports for gauges, pump, gas inlet and few spares for future upgradation., baking capability: entire chamber designed to bake-out at 150 c to reduce contamination and out gassing during operation, cooling capability : water manifold with flow switch / flow meters, near uhv chamber specification: chamber overview: spherical (diameter 14 ) or equivalent square shaped uhv chamber with stand., three 2-inch magnetron sputtering sources, each with individual gas inlet. all cf flanges and uhv viewports/ss blanks., substrate holder: a. diameter: 2inches; heating : molybdenum heater capable of heating substrate (a) from room temperature (rt) to 800 c during rotation and (b) from room temperature (rt) to 1000 c without rotation b. rotation : substrate holder driven by stepper motor. variable speed from 0 to10 rpmmovement: up / down vertical movement of total 25mm to adjust substrate position during deposition sputtering geometry: one sputtering source mounted parallel to substrate surface (tilt able preferred). two sputtering sources mounted confocally at an angle. base pressure : lower than 5 10 mbar (near uhv)., vacuum pumping system: turbo molecular pump : pfeiffer hipace 700 / edwards next 730 / leybold turbo vac 900 ix or equivalent with cf100 flange and integrated controller, suitable for near uhv vacuum., backing pump: pfeiffer hi scroll 12/edwards nxds15i / leybold scroll vac 15 plus or equivalent dry scroll pump used to back tmp, gate valves: one cf150 manual gate valve to isolate / throttle chamber from pumping system, vacuum gauges and measurement: cold cathode readout capable of dis

CTN :45090503

03 Jun, 2026 NA

Manmad - Maharashtra

Tender For corrigendum : supply of hv switchboards c c - supply 6.6kv switchboard at manmad pumping station tag no-hv swbd-1-manmad as per mr sl. no. 1.1 , supply 6.6kv switchboard at manmad pumping station tag no-hv swbd-2-manmad as per mr sl. no. 1.2 , mandatory spares for hv swbds at manmad terminal as per mr sl. no. 1.3 , supply 6.6kv switchboard at sanghvi pumping station tag no-hv swbd-1-sanghvi as per mr sl. no. 1.4 , supply 6.6kv switchboard at sanghvi pumping station tag no-hv swbd- 2-sanghvi as per mr sl. no. 1.5 , supply 6.6kv switchboard at sanghvi pumping station tag no-hv swbd-3-sanghvi as per mr sl. no. 1.6 , mandatory spares for hv swbds at sanghvi terminal as per mr sl. no. 1.7 , supply 6.6kv switchboard at gujri pumping station tag no-hv swbd-1- gujri as per mr sl. no. 1.8 , supply 6.6kv switchboard at gujri pumping station tag no-hv swbd-2-gujri as per mr sl. no. 1.9 , mandatory spares for hv swbds at gujri pumping station as per mr sl. no. 1.10 , supervision of installation work at manmad as per mr sl. no. 1.11 , performing testing and commissioning activities at manmad as per mr sl. no. 1.12 , supervision of installation work at sanghvi as per mr sl. no. 1.13 , performing testing and commissioning activities at sanghvi as per mr sl. no. 1.14 , supervision of installation work at gujri as per mr sl. no. 1.15 , performing testing and commissioning activities at gujri as per mr sl. no. 1.16 , on call visit charges for amc for 1st year at manmad as per mr sl. no. 1.17.1 , testing kit mobilizing charges for 1st year as per mr sl. no. 1.17.2 , on call visit charges for amc for 2nd year at manmad as per mr sl. no. 1.17.3 , testing kit mobilizing charges for 2nd year as per mr sl. no. 1.17.4 , on call visit charges for amc for 3rd year at manmad as per mr sl. no. 1.17.5 , testing kit mobilizing charges for 3rd year as per mr sl. no. 1.17.6 , on call visit charges for amc for 1st year at sanghvi as per mr sl. no. 1.18.1 , testing kit mobilizing charges for 1st year as per mr sl. no. 1.18.2 , on call visit charges for amc for 2nd year at sanghvi as per mr sl. no. 1.18.3 , testing kit mobilizing charges for 2nd year as per mr sl. no. 1.18.4 , on call visit charges for amc for 3rd year at sanghvi as per mr sl. no. 1.18.5 , testing kit mobilizing charges for 3rd year as per mr sl. no. 1.18.6 , on call visit charges for amc for 1st year at gujri as per mr sl. no. 1.19.1 , testing kit mobilizing charges for 1st year as per mr sl. no. 1.19.2 , on call visit charges for amc for 2nd year at gujri as per mr sl. no. 1.19.3 , testing kit mobilizing charges for 2nd year as per mr sl. no. 1.19.4 , on call visit charges for amc for 3rd year at gujri as per mr sl. no. 1.19.5 , testing kit mobilizing charges for 3rd year as per mr sl. no. 1.19.6 , site training for hv swbds supplied at manmad as per mr sl. no. 1.20 , site training for hv swbds supplied at sanghvi as per mr sl. no. 1.21 , site training for hv swbds supplied at gujri as per mr sl. no. 1.22 , unit rates for test as per attached annexure-1 as per mr sl. no. 1.23 , unit rates for 2 years o and m spare as per clause no. 4.5.3 as per mr sl. no. 1.24

CTN :45330069

02 Jun, 2026 11.79 Lacs

Multi City - Goa

Tender For maintenance of water supply system supply of spares for the 600 hp kirloskar make sct 300 59 pumps at gogol pumping station - "supply of pump shaft for the 600 hp kirloskar make( sct-300/59) pump.", "supply of gland for the 600 hp kirloskar make( sct-300/59) pump.", "supply of lantern ring (split ring) for the 600 hp kirloskar make( sct-300/59) pump.", "supply of liquid deflector for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing housing de for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing housing nde for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing cover de for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing cover nde for the 600 hp kirloskar make( sct-300/59) pump.", "supply of adjusting sleeve for the 600 hp kirloskar make( sct-300/59) pump.", "supply of locking sleeve for the 600 hp kirloskar make( sct-300/59) pump.", "supply of impeller key for the 600 hp kirloskar make( sct-300/59) pump.", "supply of coupling key for the 600 hp kirloskar make( sct-300/59) pump.", "supply of lock nut bearing for the 600 hp kirloskar make( sct-300/59) pump.", supply of o ring for sleeve of 600 hp kirloskar make( sct-300/59) pump., "supply of o ring for insert of 600 hp kirloskar make( sct-300/59) pump.", "supply of v ring 90d x 15.5t for the 600 hp kirloskar make( sct-300/59) pump.", "supply of v ring 82d x 18t for the 600 hp kirloskar make( sct-300/59) pump.", "supply of bearing spacer for the 600 hp kirloskar make( sct-300/59) pump.", supply of wear ring for the 600 hp kirloskar make ( sct-300/59) pump., supply of collar for the gland packing of 600 hp kirloskar make( sct-300/59) pump.

Central Government/Public Sector

CTN :45200774

28 May, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For procurement of ktr make couplings and spares of hydraulic oil pump ofstacker cum reclaimer at ntpc north karanpura

State Government

CTN :45268513

05 Jun, 2026 NA

Bankura - West Bengal

Tender For supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at ibs uporgora under chhatna, saltora block sub-surface water based piped water - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

State Government

CTN :45268542

05 Jun, 2026 NA

Bankura - West Bengal

Tender For supply delivery and fitting fixing of gaseous chlorination items for the standby system of clear water pumping station and supply of 1 no empty chlorine tonner at intake kukrakuri under chhatna, saltora block sub-surface water based piped - supply and delivery of gaseous chlorination unit spares (0-10kg) & (0-4kg)kg/hr. require of wallace & triman evoqua, vacuum regulator (wall/cylinder mounted)with auto switchover facility, capacity 0-10 kg/hr max, evoqua make s10k scale controller, capacity 10.0kg/hr, manual control, evoqua make 1 injector suitable for 40 psi backpressure, fitting fixing of the above new supplied spares on the existing position part by part with new ejector pipe line with necessary fitting materials and necessary welding job by expert mechanical complete the job as per direction of eic and as per is:10553., supply and delivery at site of 1000 kg empty chlorine tonner hydraulic test pressure 30 kgf design as per asme section viii div.1 with hot-forged steel hook and a safety tongue piece, add: 18% gst, add: 1% cess

State Government

CTN :45272866

19 Jun, 2026 29.60 Crore

Shikaripura - Karnataka

Tender For survey, investigation, design, supply, erection, testing and commissioning of tank filling scheme for filling 15 number of tanks, comprising of construction of barrage, in take structure, pumping machineries, 11/0.433 kv electrical sub station, transmission line rising main by lifting water from dandavathi river in soraba taluk shivamogga district including supply of spares parts & tools, operation & maintenance for five years after successful commissioning of the work for yadagoppa tank filling scheme works on turnkey basis

State Government

CTN :44962078

26 May, 2026 25.09 Crore

Sindhanur - Karnataka

Tender For corrigendum : survey, investigation, design, supply, erection, testing and commissioning of lift scheme comprising of construction of bridge cum barrage(bcb), intake structure, pumping machineries, 11/0.443kv electrical substation, transmission line, terminal bay, rising main, delivery chamber, for supplementing water to the suffering atchkat of tail end portion of sub distributary 54/3r of distributary-54 under tlbc by lifting water from sindhanur halla near mullur village in sindhanur taluk, raichur district including supply of spares parts and tools, o&m for five years after successful commissioning of the work for sindhanur lis cum bcb works on turnkey basis.

CTN :45133039

30 May, 2026 NA

Durgapur - West Bengal

Tender For corrigendum : procurement of different types of hose of unit-7/dpps - procurement of different types of unit-7/dpps, flexible hose for mill hydraulic oil line. withstand temperature 150 o centigrade, pressure -200 kg/cm2. make: - parker., hydraulic hose for hydraulic oil pump (suction). hydraulic cylinder lifting hose of unit-7. withstand temperature 150 o centigrade, pressure -200 kg/cm2. make: - parker., flexible hose for oil station of paf(outside fan)flexible hose for pa fan (outside). withstand pr-200 kg/cm2 andtemp- 150o c, aph guide bearing non metallic hose. hydraulic cylinder lifting hose of unit-7. withstand temperature 350 o centigrade, make: - parker., flexible hose for modulating system (inside) pa fan withstand temperature 350 o centigrade, pressure -200 kg/cm2. make: - parker.

Hydraulic Oil Pump Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

State Government

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

State Government