Latest hydraulic puller Tenders | Government hydraulic puller Tenders

Central Government/Public Sector

CTN :45616776

20 Jul, 2026 NA

Ajmer - Rajasthan

Tender For supply of interchangeable threaded insert 1/4* bsp male to 1/4* female hydraulic nut for automatic hydraulic bearing extractor machine used for press out of roller bearing bearing no. 22326 c/c3 of bore size130 mm [ warranty period: 30 months after the date of delivery ] ]

State Government

CTN :45585176

29 Jun, 2026 8.18 Lacs

Gautam Budnagar - Uttar Pradesh

Tender For providing and fixing of open gym equipment in village tilpata karanwas, greater noida. - sit up station: providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. seat and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum, thickness of plastic of 8mm, colorful and uv resistant and environmental friendly., the equipment to be fixed on ground with concrete of minimum strength m-25 and j shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. all complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately)., air walker: providing, designing and fixing of air-walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 10mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. all welding joints of pipe shall be robotic weded with joints paint to be applied al all the welding points prior of finising. all open ends of pipe to be closed with gl/lldpe caps. base plate cover shall be made virgin lldpe plastic by roatational molding with minimum 8mm thickness. uv resistant and colour as approved by engineer in charge. ligh quality grip rubber should be used on handles., foothold shall be made of nylon prevent alloy with rounded edges to impact and injury. maintenance free bearings should be used in the equipments manufactured by reputed company duiy oil sealed and self lubricated to be approved by engineer-in charge. the equipment shall be fitted with in-built limiters. the equipent shall be fixed on ground with concrete of minimum strength m-25 and js haped welded bolts and when concrete is sec. fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of engineer-in charge regarding material, shape of equipment. colour (of metal. seat and pedal). and fixing of equipemnt etc (the cement concrete and excavation work shall be paidseparately)., seated chest press: providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000mm abricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using akzo nobel or equivalent of 80-120 micron thick. all joints of pipe are robotic welded with joints scalloped as necessary and dressed off |removing sharp edges and burrs. zinc primer paint to be applied at all welding points prior to finishing. handle bars are to be provided with high quality grip rubber. pedals shall be made up of nylon alloy with rounded edges to prevent any impact of injury. seats and base plate cover to be made up from virgin lldpe manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and uv resistant and environmental friendly., bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by engineer in-charge. equipment to be fitted with inbuilt limiters to prevent unwanted movements. all open ends of pipe to be closed by gi/illdpe caps for user safety. the equipment to be fixed on ground with concrete of minimum

Central Government And Public Sector

CTN :45623802

10 Jul, 2026 NA

Bhilai - Chhattisgarh

Tender For supply of hydraulic puller+pusher for gear, coupling fans of compressor of three phase electric locomotives. technical specification uploaded as annexure-a. [ warranty period: 30 months after the date of delivery ][quantity tolerance (+/-): 5 %age , item category : normal , total po value variation permitted: max 8 lacs ] ]

CTN :45333060

25 Jun, 2026 NA

Visakhapatnam - Andhra Pradesh

Tender For corrigendum : tender for supply of cover , diaphragm , washer , base complete , ring sealing , sealing ring for set w6 , rubber bellows , multi led t5.5 k24 gn , male connector , delivery valve , push button , switch , parts kit , stud , nut , grooved pin , fuse 3a fk2 , key top cover green f/pan 1-01 , temprature gauge , oil pump , relay 30a 24vdc , pressure gauge , pressure gauge , pressure gauge , pressure gauge , 0-2400 tachometer , automatic cutout 2 oa10045345510 , automatic cutout 8 0a 0045346010 , switch , pressure sensor 0-64 bar , cylindrical pin , washer a , oil control ring st w6 , stud , screw , power indicator electric , power indicator 10-0-10/gn-rt , mpc1-01 card f/computer a.741620/741634 , plug-in board , mfb 1 , plug-in-board , plug-in board , panel for control panel , axial bearing , comp.wheel zr 195 , ring snap , carbon scrapper ring , con.rod brg.upper half , bushing con rod 75.00 , trust member , stop , fuel delivery pump , gasket for set w6 , bolt cylinder head , cylinder , bearing bushing , connection housing f/control lever , volute , housing emu 1-01-c , modular system , plug-in-board not adjusted , sealing ring , sealing ring 150x7.3 , gasket , tab washer , o ring , o-ring , o - ring , o ring , cylinder roller bearing , hose , gasket , gasket for set w5 , gasket for set w5 , ball 16mm , locking ring , compensating ring , valve , gasket , sealing cone 22mbn 15005 , injector , piston , diode in4004 , end cover , roller diaphagram , filter element , washer , speed transmitter_0001539620 , piston , semi rotary hand pump , incandescent lamp , temperature sensor pt1000 , speed sensor br4000 nw , hex nut , main engine lub oil priming pump , fuse 30a fk2 , fuse 1a fk2 , pressure gauge 0-6 bar , relay 12v / 150a , relay base , pressure sensor , pressure sensor 15 bar , pressure sensor 10bar , pressure sensor , thermal actuator , pressure hose , cylinder liner , sealant pipe thread loctite 586 , eprom , eprom , mcu 1-04 computer , plug-in board , module cob 8-01 , piston ring , oil separator , nut , washer thrust , bolt hex cyl hd , tube injector , valve spring , nut hex fuel rail m42 1 5 , exhaust bellow , sea water pump , coolant pump , shaft wtr pmp hi temp clg circuit , plug in board , plug in board , plug in board bob 1 02 a , o ring , o ring , o ring , o ring 100 4mm , oring for set w5 , o ring , o ring , gasket , paper pack centrifugal spinner filter , vaccum guage , gasket , control block , conversion kit f series 4000 5205304531 , cylinder head , vacuum indicator , washer , crankshaft bearing size 0 0 s s 5240336101 , control lever ros 2-05fpp , control lever , oil spray nozzle , servo-locker , corrosion inhibitor conc. coolant cs100 , diff-press monitor , level monitor , level monitor , pressure sensor , snap ring , conrod bearing size 0-0 s sx00040714 , seal ring s s 5240160319 , pushrod , flow restric valve , cam shaft , washer , button caps , bearing camshaft std , plug-in board , switch e-stop45mm w/self monitorngco , valve , plug in board , link , centrifugal oil fl tr

CTN :45492754

22 Jun, 2026 4.50 Lacs

Leh - Jammu And Kashmir

Tender For corrigendum : supply of retainer , rivit bird cage , cover , pan om , clip , plug rockersw , cover hvac , insert threaded , cap end , knob , sleeve , bumper , instruction , bushing keyed , bushing , clevis rod end , spring centering , pin hardende clevis , stand seat , foam panle , foam edge , foam panel , panel lh , cover pan flor , foam front , boot , foam pan floor , pedal assy lh , hinge rear door , handle latch door , retainer plastic , roller , stop , channel , stud weld on , grip lever , plug , pin pivot tapered , knob clamping , bushing wear , fitting grease , damper , bushing weld on , bushing pivot , ftg grease strainth , ftg grease 90 , ftg grease straght , spring compression , lever tach , pin , cover drain , plug recessed pipe , link , gasket liquid , cover access , cover plate , bearing axle , key wood ruff , vent breather , bushing press fit 5 , mount man fold drain , fitting hyd connector , clamp , mount bulkhead , strap , clamp tube khead , tee , fitting hyd elbow , clamp hose , decal danger , strap tie , clamp 10 , spacer tube , mount valve , mount boom down , handle control , adapter hyd , seal bushing , pin clevis , pin hair * /bid number : gem/2026/b/7640814 + /dated: 09-06-2026 ' ' / bid document 1 / 66

CTN :45577301

07 Jul, 2026 10.98 Lacs

Ernakulam - Kerala

Tender For tender for supply of anti friction bearing , nut hex , sensor temp gear oil , transmitter for gear box oil temperature , temperature sensor , filter element , control valve , bearing anti friction , bearing anti friction , bearing anti friction , valve slide , inside disc 3 100 340 69 023 , filter combination indicator pis 3030 , filter cartridge e852034 orgvst 100r1 , pre cont oil press too low , pre transmitted 4 20ma , pre cont start s by pump , pre indicator g b pre 4 20ma , pre cont clutch astren , shaft seal ring 200x230x15 , out side disc 3 100 210 69 008 , pre cont oil pre too low

Central Government/Public Sector

CTN :45587669

27 Jun, 2026 36.76 Lacs

Angul - Odisha

Tender For supply of te66113 , hose,part no-te66129 , hose,part no-4720156 , hose water,part no-td66499 , hose,part no-te66166 , hose,part no-te66127 , hose,part no-te66128 , hose urea tank to supply module,part no-te66391 , hose water,part no-td66500 , hose,part no-4623955 , hose,part no-4474888 , hose,part no-te66345 , hose,part no-4392158 , cushion rubber,part no- ya00076072 , bush,part no-te66405 , manifold,part no-td66216 , hose rubber,part no-4449325 , hose,part no-td66374 , hose,part no-td66376 , hose,part no- ya00021316 , switch,part no-ya00004503 , switch,part no-ya00005853 , switch,part no-ya00005852 , switch,part no-ya00004504 , press switch 5 bar no,part no-td66506 , hose,part no-te66167 , switch,part no-ya00004496 , switch tumbler,part no- ya00018410 , press switch 80 bar no,part no-td66527 , pump,part no-td66234 , hose,part no-xv00000066 , hose,part no-te66169 , hose,part no-4619618 , bushing,part no-te66652 , bushing,part no-te66653 , switch,part no-ya00004499 , press switch 80 bar nc,part no-td66508 , hose,part no-td66375 , hose,part no-te66015 , bushing,part no-te66651 , hose,part no-te66016 , switch tumbler,part no- ya00031826 , switch,part no-263g243612 , pin,part no- td66122 , pin,part no-td66116 , bushing,part no- te66650 , switch tumbler,part no-ya00027704 , pin,part no-td66121 , hose,part no-td66377 , hose,part no-ya00029215 , pin,part no-td66119 , pin,part no-td66118 , pin,part no-td66120 , hose,part no-4286825 , hose supply module to atd ,part no- te66204 , shaft seal,part no-te68058 , front wiper assy,part no-tc22427 , pin,part no-td66117 , rubber cushion,part no-2670613121 , float,part no- ya00050167 , motor,part no-xb00001059 , tank water,part no-ya00036011 , multi sealing ring,part no-te68102 , pump gear,part no-yb60000257 , brake valve,part no-tb66043 , valve,part no-ya00003915 , condensor,part no-ya00061979 , main pump,part no- 9254028 , spacer 2.3mm,part no-263g872131 , o- ring,part no-2668872061 , centre bearing kit,part no- te66526 , spacer,part no-263g872141 , switch,part no- ya00005845 , cable battery,part no-te66230 , o- ring,part no-te68093 , guide ring,part no-te68127 , support ring,part no-te68124 , support ring,part no- te68126 , washer,part no-te68131 , cover,part no- te68133 , cup spring,part no-te68132 , grooved ring,part no-te68123 , grooved ring,part no-te68125 , outer clutch disk,part no-te68130 , inner clutch disk,part no-te68129 , end shim,part no-te68128 , piston,part no-te68121 shim,part no-ya00021363, washer,part no-2660872321, shim,part no-ya00021364, o ring,part no-4187328, spacer 2.3mm,part no-2670872321, hose,part no- te66090, spacer 2.3mm,part no-2670872581, hose,part no-te66207, bolt sems,part no-j271225, o-ring,part no-2046981, bolt,part no-xb00001049, bolt,part no- j901225, hexagon screw,part no-te68134, seal dust,part no-te66232, o-ring,part no-4509182, hose,part no-te66220, fuse 15a,part no-4438015, fuse 30a,part no-4639136, hose,part no-te66208, hose rubber,part no-4033338, seal dust,part no-te66234, rubber,part no-te28500, fusible-link 140a,part no- ya00021809, wiper dust seal,part no-te66442, fuse 10a,part no-4428911, fuse,part no-4428910, hose reducer,part no-te66151, fuse,part no-4436736, //bid details 2 / 129

CTN :45576155

24 Jun, 2026 NA

Jamalpur - Bihar

Tender For supply of guide tube adapter spares parts of hydraulic puller machine as per drg. no:- jmp/boxn-11/2005 [ warranty period: 30 months after the date of delivery ] ]

CTN :45591943

23 Jun, 2026 NA

Multi City - West Bengal

Tender For auction sale of depot non ferrous scrap - lot no.m.nfa-1.exmp.e & i.06.2026-27.01 description- scrap aluminium with iron attachments and other aluminium casting, field coil, lamp caps, aluminium boring etc., (our offer) scrap & cond. aluminium items such as air filter (with iron and fiber wool attachment), aluminium wheels with or without iron and bearing attachments, window frames with or without rubber sleeves and other miscellaneous nfa-1 items as in the lot in one place at "e-2" sector and one place in between "i-1 & i-2" sectors. may be in intact or dismantle condition. mechanical press allowed without causing any weight loss of material. before bidding, bidders are requested to inspect the lot. loading will be done by purchaser's own arrangement.

CTN :45533008

20 Jun, 2026 4.60 Lacs

Thiruvananthapuram - Kerala

Tender For one panchayath one playground - development of vankulathuvayal stadium in azhikode grama panchayath in azhikode lac, kannur -supply and installation of outdoor gym equipment - retender - open gym equipment, od405580/2025-2026 horse rider - supply and installation of horse rider having the following specifications: dimensions: (l x w x h) 1140 x 400 x 1400 mm. main frame - 114 mm od b class gi pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. foundation cover cap - dome shape of pp / nylon / hdpe material. remaining frame is made by 48 mm od b class gi pipe. seat frame is made by 48 mm od b class gi pipe. seat position must be horizontal to 110 -120 degree. link- made up of 48 mm od b class g.i. pipe. angle between link and ground position is 10-20 degree. handle - 33 mm od b class gi pipe. paddle vertical support - 60 mm od b class gi pipe. handle frame- 42 mm od b class gi pipe dually bending design. foot pipe - 33 mm od b class gi pipe. support frame 10 mm thick ms flat is used. seat- dimension 320 x 270 x 100 mm blow moulded wall thickness 4mm material hdpe. bearing bush closing cap pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing - use is 6005 permanent lubricated reputed brand. bearing bushes - 60mm od seamless pipe. pin made of 25 mm m.s. bright bar. grips - high quality rubber 46 mm od. circlips a 24 circlips are used for assembly. coating - best quality of powder coating 60 to 70 micron. safety instructions and exercise chart - start &finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405586/2025-2026 leg press (double) - specifications: dimensions: (l x w x h) = 1676 x 400 x1500 mm. main frame - 114 mm od ?b? class gi pipe. foundation plate m.s. round plate of 250 mm &8 mm thick. foundations cover cap - dome shape of pp / nylon / hdpe material. link - is 60 mm od b? class gi pipe. seat frame - 42 mm od b class gi pipe. leg press back rest should be angled in 120 -130 degree. footrest - cast iron 124 x 296 x 5 mm thick and m.s plate of 2 mm thick use to support it. seat & back rest ? 380 x 275 x 60 mm thick high-density polyethylene (hdpe) blow molded with m10 integrated wall thickness 3 to 4 mm. link connected with frame by 8 mm thick laser cutting ms profile. top closing cap ? dome shape made by pp / nylon / hdpe material. closing cap?s- pp / nylon / hdpe material. foundation stool: made from main pipe 88 mm od m.s pipe and top support of m.s. round plate of 250 mm & 8 mm thickness is welded at top. square tube of 30 x 30 x 2 mm must be used to support center pipe. height of stool is 3 ft. foundation stool is embedded in c.c. stock below ground level. bearing- use is 6005 permanent lubricated reputed brand. pin 25 mm m.s. bright bar pin. bearing bushes - 60 mm od seamless pipe. circlip? a 24 circlips are used for assembly. coating - best quality of powder coating 80 -120 micron. safety instructions and exercise chart - start & finish position stick on product. all joints must be welded as per is standards and zinc primer paint should be applied at all the welding points prior to finishing. (foundation shall be m20 cc and design shall be approved by the engineer-in -charge before installation.), od405583/2025-2026 back extension - supply and installation of back extension having the following specifications: dimensions: (l x w x h) 1060 x 730 x 990 mm. main frame - made from 88 mm od b class g.i. pipe. foundation plate m.s. round plate of 250 mm & 8 mm thick. leg support - 42 mm

Hydraulic Puller Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

State Government

Central Government And Public Sector

Central Government/Public Sector