Latest hydraulic roll marking machine Tenders | Government hydraulic roll marking machine Tenders

Central Government / Public Sector

CTN :40135630

05 May, 2025 39.37 Lacs

Rampur-Up - Uttar Pradesh

Tender For supply of 250 kg load cell flintec atex peso , clamping roller , dp valve , dp valve diaphragm seal , flp led light for vision reader , foot buffer , table buffer , side buffer , lpg gun kosel , lpg gun mouth bottom part , old gun , old nozzle , ss base plate , vision reader stopper, htpc , digital input module , digital output module , strainer filter , self-centring spring , checker plate for check scale platform , check scale stopper , filling gun guide rod , carousel input output ss plate

CTN :40140810

17 May, 2025 NA

Kamrup - Assam

Tender For supply of k6 6530 001480 basin wash aluminium , k6 7340 000003 spoon desert ss flat handle , k6 3590 000001 scissors barber 175mm , k6 7340 000036 knief cook 230 mm , k6 7340 000038 spoon serving mk2 , k6 7330 000111 roller for stone curry , k6 7340 000002 knief table solid handle ss , k6 7330 000058 uc m set lotah , k6 7330 000118 container 9 ltrs , k6 7330 000085 utensils cooking 150 men set parat small , k6 7350 000016 trays mess compartment ss army patt , k6 7310 000012 stove oil wl screwed cap for tent , d1 3770 000816 mule shoe mk 2 no 4 , d1 3770 001062 bag nose large

CTN :40140892

17 May, 2025 NA

Jodhpur - Rajasthan

Tender For supply of bench workshop wooden , rack magazine , sofa single seater , table writing , almirah large steel with shelves , almirah small steel with shelves , bookcase 4 shelf steel , rack closed 6 tier steel , rack pigeon hole steel , table centre steel , table office clerk steel , table office officers steel , bench workshop steel , chair revolving low back ajustable , chair revolving , cabinet roller 7 drawer , cabinet 15 drawer , table computer , mobile table computer , bench workshop steel atc table , table open frame w firebricks , cabinet 9 drawer , shelf storage 4 shelf with casters , cabinet filing , conference chairs , projection screen , conference table long 6m , chair revolving executive high back , sofa set 3 seater , sofa set 7 seater , sofa cum bed , sofa set 5 seater , cantilevered storage rack , pallet storage rack

Central Government/Public Sector

CTN :40095498

29 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For lmmm capital repairs - mechanical equipment (bar mill) part-b-, gauge plates: replacement of buffer assembly , bundling 1& 2:build up and grinding of lowering & holder arms , disappearing stops:revisioning of disappearing stopper assembly , bundling:replacement of bundle former assembly , gauge plates: replacement of stopper plates , roller table:provision of guide pieces on apron plates , roller table:changing of oil in all gearboxes , roller table:provision of wearplates , chains fixing of track rollers , roller table fabrication & replacement of apron posts , bundling replacement of scrapper shaft , bundling unit:replacement of bundle holder arms , disappearing stops:rectification of foundation bolts , bundling 1 & 2 changing of lowering arm shaft , cold shear:replacement of scrap chute assembly , disappearing stops plates changing , roller table 104 & 112:changing of supporting beams , chain 115:replacement of drive shaft

Central Government/Public Sector

CTN :40095500

29 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For lmmm capital repairs- mechanical equipment (barmill)-part-a, rhhf fabrication & erection of damaged deslagging doors , stands:chang.of bed plates-finishing group , vertical stands revisioning of lift table gearboxes , rhhf:replacement of entry & exit doors , cooling bed:changing of separating ledges , rhhf:replacement of explosion flaps , rhhf:revisioning, assembling, replacement & , aligning of rollers , pinch roll(rhhf):revisioning of top roll , pinch roll(rhhf):revisioning of bottom roll , roughing stands(h1-h4): revisioning and , replacement of s/d gearboxes , vertical stands replacement of main drive gearbox , run in trough:replacement of brakeslide straps , cooling bed: assembly and replacement of , moving rakes , cooling bed: assembly and replacement of , fixed rakes , combined hor.&vert.looper:replacement of , base frame , stand changing car replacement of liners , dual rotary shear:replacement of scarp , chute , rhhf:revisioning & replacement of gas pipe line assembly , run in troughs(cooling bed): revisioning of drive gearboxes of bs1,bs2&separating ledges assembly , stands revisioning of trestle assembly , rhhf replacement of gas compensators, rhhf:fabrication of shell assembly , rhhf:replacement of shell assembly , cooling bed:replacement of drive gear coupling , replacement of aligning roller table turnbuckles## , replacement of bs1,bs2 & sl graphite bushes and bearings , replacement of bs1,bs2 & sl lever pins , replacement and revisioning of cuttler hammer brakes of moving rake and chain drive , replcement and revisioning of pneumatic disc brake assembly of bs2 drive , replacement of counter weight bracket and pins of chain 2 , replacement of run in trough turnbuckles and pins , revisioning of moving rake long shaft plummer blocks and split bearings , replacement of moving rake long shaft broken coupling bolts , replacement/revisioning of drive lever and crank assembly of bslbs2 and si

Central Government/Public Sector

CTN :40095501

29 Apr, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For lmmm capital repairs- mechanical equipment (barmill)-part-a, rhhf fabrication & erection of damaged deslagging doors , stands:chang.of bed plates-finishing group , vertical stands revisioning of lift table gearboxes , rhhf:replacement of entry & exit doors , cooling bed:changing of separating ledges , rhhf:replacement of explosion flaps , rhhf:revisioning, assembling, replacement & , aligning of rollers , pinch roll(rhhf):revisioning of top roll , pinch roll(rhhf):revisioning of bottom roll , roughing stands(h1-h4): revisioning and , replacement of s/d gearboxes , vertical stands replacement of main drive gearbox , run in trough:replacement of brakeslide straps , cooling bed: assembly and replacement of , moving rakes , cooling bed: assembly and replacement of , fixed rakes , combined hor.&vert.looper:replacement of , base frame , stand changing car replacement of liners , dual rotary shear:replacement of scarp , chute , rhhf:revisioning & replacement of gas pipe line assembly , run in troughs(cooling bed): revisioning of drive gearboxes of bs1,bs2&separating ledges assembly , stands revisioning of trestle assembly , rhhf replacement of gas compensators, rhhf:fabrication of shell assembly , rhhf:replacement of shell assembly , cooling bed:replacement of drive gear coupling , replacement of aligning roller table turnbuckles## , replacement of bs1,bs2 & sl graphite bushes and bearings , replacement of bs1,bs2 & sl lever pins , replacement and revisioning of cuttler hammer brakes of moving rake and chain drive , replcement and revisioning of pneumatic disc brake assembly of bs2 drive , replacement of counter weight bracket and pins of chain 2 , replacement of run in trough turnbuckles and pins , revisioning of moving rake long shaft plummer blocks and split bearings , replacement of moving rake long shaft broken coupling bolts , replacement/revisioning of drive lever and crank assembly of bslbs2 and si

Central Government/Public Sector

CTN :39639855

25 Apr, 2025 NA

Seraikela-Kharsawan - Jharkhand

Tender For bid to ras tender for supply of various games and sports equipment - basketball leather , basketball net , pu micro leather , stiched football , football moveable goal post complete set , football goal post net , football corner stick with flag , goalkeeper gloves , badminton racket without t-joint , badminton shuttle 350 , badminton net , service judge chair , chess board with heavy pieces , hocky stick y-30 mix colour , hocky ball , hocky goal keeper kit , hocky moveable goal post set , plastic marker disc round , plastic marker cones 9 inch and 12 inch , table tennis board 1000dx , t. t. racket , table tennis ball , table tennis net with stand , scoreboard portable multi-sports , carrom board csi 48 inch with coins and striker , volleyball microfibre composite leather , volleyball net , fixed height referee stands for courts , cricket bat (ew) grade-3 , cricket ball (4 cut red sg) , cricket ball (4 cut white sg) , batting gloves with leather palm , kepping gloves with inner , batting pads , chest guard , arm guard , thigh pads right & left (leather only) , cricket helmets with fixed grill , wooden cricket stumps with bails , cricket mat (full size) , scoop cricket bat for tennis ball , 1000 kgs manual cricket pitch hand roller , graphite lawn tennis racket , lawn tennis ball , lawn tennis racket grip , lawn tennis net , professional sports whistle , high sound , discuss (2 kg) , discuss (1 kg) , measuring tape 100m , measuring tape 50m , measuring tape 30m , javelin , agility ladder , skipping rope 9.2 ft long , lawn mower machine

CTN :40085821

29 Apr, 2025 7.14 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/03 - name of road - nh-82 soyba to masiya road , length- 8.20km .clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., scarifying the existing bituminous road surface and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying bituminous macadam with 100-120 tph hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over apreviously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wh

CTN :40085822

29 Apr, 2025 6.37 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/01 - name of road - nh-82 to nepura via malti , length of road - 2105 mclearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, scarifying the existing bituminous road surface and disposal of scarified material with a lift upto 3 m and lead upto 1000 m as per technical specification clause 301.4., excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m and lead upto 1000 m as per technical specification clause 302.3, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wet mix macadam- providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at omc in mechanical mixer (pug mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kn weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per tables 400.11 & 400.12 and technical specification clause 406., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., mix seal surfacing - providing, laying and rolling of close-graded premix surfacing material of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-b) aggregates using penetration grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 8-10 kn static roller and finishing to required level and grades as per technical specification clause 509., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specifie

CTN :40085825

29 Apr, 2025 14.83 Crore

Biharsharif - Bihar

Tender For rrsmp/25-26 biharsharif/04 - name of road - construction of road from nh-31 to rahui bazar (incl. 5 years maint.)clearing and grubbing road land (by manual means) including uprooting wild vegetation, grass, bushes, shrubs, saplings and trees of girth upto 300mm, removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification clause 201.1 and direction of e/i, dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pices not exceeding 0.02 cumin volume and stock pilling at designated location and disposal of dismantled materials upto a lead of 1000 m,stacking serviceable and unserviceable materials separately., construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 100 m as per technical specification clause 301.5, construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of tables 300.1 and 300.2 with a lead upto 1000 m as per technical specification clause 301.5, construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table 300.2 with lead upto 1000 m as per technical specification., construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at omc, and compacting with smooth wheel roller to achieve the desired density, complete as per technical specification clause 401. grading - ii, wbm grading - iii - providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kn in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification., providing and applying primer coat with bitumen emulsion (ss-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per technical specification clause 502., providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared granular surface tretaed with primer and clened with hydriloc broom as per technical specification aclouse 503., providing and laying semi dense bituminous concrete with 100-120 tph batch type hmp producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per morth specification clause no. 508 complete in all respects., construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to is 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished i

Hydraulic Roll Marking Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government / Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector