Latest hydraulic scissor Tenders | Government hydraulic scissor Tenders

Central Government/Public Sector

CTN :41314517

19 Aug, 2025 11.75 Lacs

Chandigarh - Chandigarh

Tender For day to day operation and annual maintenance to six passenger lift make schindler at dgre, sector-37a, chandigarh and ten passenger lift make schindler bio-technology laboratory at dihar, chandigarh

Central Government/Public Sector

CTN :41324549

02 Sep, 2025 NA

Kurukshetra - Haryana

Tender For supply of lo(rc/390) fuel lift pump part number 169923, make loram [ warranty period: 6 m onths after the date of delivery ]

Central Government / Public Sector

CTN :41195017

07 Aug, 2025 4.79 Crore

Jagatsinghapur - Odisha

Tender For corrigendum : custom bid for services - 9070c25b95 agency for heavy equipment resources for petrochemical and refinery area-contractor has to supply following heavy equipment on hire basis at iocl paradip refinery: a) one 250 mt tyre mounted telescopic boom crane and should have minimum 70 mtr boom length along with with extended 20 mtr jib length (i.e. total boom length 90 mtr ). it should have lifting capacity of minimum 25 mt at the lifting height of 40-60 meter from ground at the required radius of operation. the radius of operation of crane shall be around 65-70 mtr with 1 operator, 1 rigger and 1 helper. b) one 50 mt or above capacity all terrain tyre mounted telescopic boom crane (main boom full extended length should not be less than 30m) along with jib extension provision with 1 operator, 1 rigger and 1 helper. c) two 10-15 mt front cabin hydra with 1 operator & 1 helper. d) one 50hp tractor with 20t trolley with 1 operator & 1 helper. e) one 40 ton load carying capacity flat bed truck trailer (length-12 meter & width 2.5 meter)(tyre mounted) f) one articulated boom lift {diesel driven with minimum lift height of 20 m (~65 ft). the capacity of the basket at any position must be a minimum of 220 kg. the articulated boom lift must have cabin type working platform with self-closing gate with 180 degree hydraulic platform rotator. basket should contain safety rope ladder for the workmen to disembark and escape in case of danger or emergency} with 1 operator and 1 helper. g) two 3t or above capacity forklift (diesel operated) with 1 operator. h) one 5t or above capacity forklift (diesel operated) with 1 operator.

State Government

CTN :40873027

08 Aug, 2025 284.19 Crore

Mandvi - Gujarat

Tender For corrigendum : engineering, procurement and construction (epc) contract for krbmc based lift irrigation scheme pressurised irrigation networks (pins) for mandvi and mangrol taluka of surat district with operation and maintenance for 10 years.

State Government

CTN :41311746

18 Aug, 2025 31.19 Lacs

Mehsana - Gujarat

Tender For providing consultancy services for gantodi-rangpur (danta taluka) lift irrigation ms pipeline project for transmission of water from sabarmati reservoir with operation & maintenance for 10 years. dist: banaskantha

Central Government/Public Sector

CTN :41324642

18 Aug, 2025 NA

Kanpur - Uttar Pradesh

Tender For supply of electric operated scissor lift to the capacity 230 kgs similar to jcb model no: s1930e. machin e technical specification attached. [ warranty period: 30 months after the date of delivery ]

State Government

CTN :41292475

08 Aug, 2025 8.89 Lacs

Solapur - Maharashtra

Tender For providing materail for construction of new smashanbhoomi shed at nimgaon ma., tq.- madha, dist.- solapur - excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) by mechanical meansssr p.no./it.no. 148/21.02, excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) by mechanical meansssr p.no./it.no. 148/21.06, providing and laying cast in situ / ready mix cement concrete in m-10 of trap / granite / quartzite / gneiss metal for foundation and bedding including bailing out water, steel centering, formwork, laying / pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete with fine aggregate (crushed sand vsi grade)ssr p.no./it.no. 152/24.01, providing and laying in situ / ready mix cement concrete m-20 of trap / granite / quartzite / gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, steel centering formwork, laying / pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)ssr p.no./it.no. 155/25.11, providing and laying cast in situ / ready mix cement concrete m-20 of trap / granite /quartzite / gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)ssr p.no./it.no. 156/25.31, providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite / quartzite / gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying / pumping, compaction and roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel) with fully automatic micro processor based plc with scada enabled reversible drum type mixer / concrete batch mix plant (pan mixer) etc. complete. with fine aggregate (crushed sand vsi grade)ssr p.no./it.no. 157/25.50, providing and laying cast in situ / ready mix cement concrete m-20 of trap / granite / quartzite / gneiss metal for r.c.c. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying / pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete, (excluding reinforcement and structural steel) with fully aut

State Government

CTN :41293073

08 Aug, 2025 NA

Ahmednagar - Maharashtra

Tender For providing following materials for work constructing one room z.p. primary school building at dhavalgaon tal shrigonda dist ahmednagar - providing following materials for work constructing one room z.p. primary school building at dhavalgaon tal shrigonda dist ahmednagar, excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.5 m.) bd.a.1 page no. 259 ssr item no 21.02, excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (lift upto 1.50 m) bd.a.2 page no. 259 ssr item no 21.06, providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cm to 20 cm thick including hand packing and compacting etc. complete. bd.a. 12 page no. 264 ssr item no ssr item no 21.38, providing and laying cast in situ/ready mix cement concrete in m-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd. e. 1 page no. 287 ssr item no 24.01, providing and laying in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. work in foundations like raft, strip foundations, grillage and footings of r.c.c. columns and steel stanchions etc. including bailing out water, formwork, laying/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provided (excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.3 page no. 298 and b.7, page no.38 ssr item no 25.11, providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(excluding reinforcement and structural steel).with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.5 page no. 300 and b.7, page.no. 38 ssr item no 25.31, providing and laying cast in situ/ready mix cement concrete m-20 of trap / granite /quartzite/ gneiss metal for r.c.c. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (excluding reinforcement and structural steel). with fully automatic micro processor based plc with scada enabled reversible drum type mixer/ concrete batch mix plant (pan mixer) etc. complete. with natural sand/v.s.i. quality artificial sand bd.f.6 page no. 300 and b.7, page no.38 ssr item no 25.50, providing and laying cast in situ/ready mix cement concrete m-20 of trap/ granite/ quartzite/ gneiss metal for r.c.c

Central Government/Public Sector

CTN :41308800

12 Aug, 2025 NA

Ghaziabad - Uttar Pradesh

Tender For requires suitable ready built and well-constructed hall type building for branch having carpet area including space for atm (1280 sqft to 1700 sqft) on lease/rental basis. premises should be preferably in ground floor and if in first floor, with lift facility at siddharth vihar ghaziabad.

Central Government/Public Sector

CTN :41309759

01 Aug, 2025 NA

Hyderabad - Telangana

Tender For limited e-tender for installation of lift shaft in c & g blocks at reserve bank of india ameerpet officersâ quarters, hyderabad

Hydraulic Scissor Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors