Latest hydraulic spring testing machine Tenders | Government hydraulic spring testing machine Tenders

State Government

CTN :45613922

03 Jul, 2026 3.58 Lacs

Surat - Gujarat

Tender For providing, supplying and installation with testing demo of additional laboratory equipment for aggregate, cement and mix-design at quality control sub division, rander, dist. surat.- providing and supplying & installation with testing demo of vicat needle apparatus for testing of initial, final seeting time & consistency of cement test. one complete set. confirm to 18:5513 , providing and supplying & installation with testing demo off vicat mould, , providing and supplying & installation with testing demo of vicat glass plate, , providing and supplying & installation with testing demo of le-chatler mould including two glass plates and lead weight as per is set of six., , providing and supplying & installation with testing demo of le-chater flack, , installation with testing demo of slump test apparatus with tamping rod 16 mm dia x 600 mm long graduated., , providing and supplying & installation with testing demo of humidity chamber refrigerated-inner 8.8-45x45x45 cm-92 liter for temperature and humidity control with over temperature protection audio alarm system, , providing and supplying & installation with testing demo of servo voltage stabilizer -3kva-single phase for humidity chamber., , providing and supplying & installation with testing demo of humidifire with controler digital-confirming ito indian standard codes, , providing and supplying & installation with testing demo of whatman fliter paper-40 for blain air permeability test apparatus for fineness of cement, confirming to indian standard codes., , providing and supplying & installation with testing demo of precision electronic balance-600 gmm 01 gm (10mg)-confimming to indian standard codes., , providing and supplying & installation with testing demo of cement morter cube mould-7.06 cm-for cement confirming to indian standard codes (18 10080, 84031), , providing and supplying & installation with testing demo of 90 micron is sleve, , providing and supplying & installation with testing demo of gauging travel 8 anch. (200 mm)-confirming indian standard codes., , providing and supplying & installation with testing demo of temperature meter concrete, , providing and supplying & installation with testing demo of room temperature meter or thermo hygrometer, , providing and supplying & installation with testing demo of tds meter pen type, , providing and supplying & installation with testing demo of ph meter - pen type, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-100ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-250ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-500ml, , providing and supplying & installation with testing demo of measuring cylinder -borosilicate glass-1000ml, , providing and supplying & installation with testing demo of standard weight box-8.8.-1 mg-200 gm-class f1 (with nabl calibration), , providing and supplying & installation with testing demo of buoyancy balance with electronic balance 10 kg x 0.1 gm, , providing and supplying & installation with testing demo of 1.) distance piece-50mm height-nos 2.) distance piece-30mm, , height-inos, , machine, , providing and supplying & installation with testing, , demo of electronic platform, , balance-100 kg-, , 10 gm platform size 600 x, , , , providing and supplying & installation with testing demo of g.j. tray 1000x 1000 x 50 mm confirming to indian standard codes., , providing and supplying & installation with testing demo of bnd- ordinary portland cement standard specific area (blaine) one set surface, , providing and supplying & installation with testing demo of wash bottle 1000ml, , providing and supplying & installation with demo of spatula testing, , providing and supplying & installation with testing demo of fil

corporations/Associations/Others

CTN :45620086

10 Jul, 2026 NA

Cuddalore - Tamil Nadu

Tender For supply of capital overhaul (coh) spares for turbine system - 229 items - thrst jour0l brg rad d380x290a 8.8 m8x25, hp ia counter shunk screw m6x16, screw hex am36x150 hp inlet assembly, bolt hex b 8.8 m36x120 hp inlet assy, washer tab ast 37 hp inlet assembly, angle l 20 sta fe410wa hp inlet, hp caparallel key, thrust pad hp casing assembly, thrust pad hp casing assembly, hp casing asly cap nut pm64, hp casing asly cap nut pm80x6, hp casing asly cap nut 01050109000 043, hp casing asly cap nut pm100x6, stud bolt l 610 hp casing assembly, stud bolt m36 l 785 hp casing assembly, stud bolt m36 l 905 hp casing assembly, stud bolt m36 l 1000 hp casing assy, stud bolt m36 l 1070 hp casing assy, stud bolt m36 l 1125 hp casing assy, stud bolt m36 l 1170 hp casing assy, cap nut m36 hp casing assembly, screw hex am36x95 hp casing assembly, screw hex am36x120 hp casing assembly, screw hex am24x90 hp casing assembly, cap nut, locking plate, screw cap soc, square wire 1.6 l 200 meter for ipshaft, rectangular wire 2.2x1.6 ip shaft, scrw set soc cp a 45h, pin cyl, pin cyl a20h8x40 for ip shaft seal 23, screw hex, screw hex am20x37 ip outer casing, pin taper 40x410 ip outer casing, nut hex b 8, washer mcdst 31 ip outer casing, hex set screw m64x70x700 ip outer casin, hex set screw m24x35x310 ip outer casing, ip ca fitted key, ip ca fitted keys l 135, scru csk soc a 12.9 m6x16 ip inlet, hex set screw, pin cyl a10n6x22 for emergency stop valv, nut hex pm24 for emergency stop valve d, cap nut, hyd speed gov cap nut, hyd speed gov grub screw is 609410.9, hyd speed gov pin cyl, hyd speed gov nut hex. a8, pilot valve for hydraulic speed governo, hyd speed gov cap nut, hyd speed gov nut hex a8, hyd speed gov nut hex a8, hyd speed gov adjusting screw, hyd speed gov pin cyl, hyd speed gov nut hex a8, hyd speed gov pin cyl bvl end, follow up piston bush pin cyl, follow up piston bush pin cyl bvl end, follow up piston bush nut hex a8, follow up piston bush adjusting screw, follow up piston bush pin cyl bvl end, follow up piston bush scru hex a 8.8, follow up piston bush scru hex a 8.8, follow up piston bush nut hex a8, follow up piston bush coller nut, follow up piston pin cyl bvl end, follow up piston collar nut hex, pilot valve for overspeed trip testing, over speed testing unit scru hex a 8.8, scru hex a 8.8 over speed testing unit, over speed testing unit scru hex a 8.8, over speed testing unit scru hex a 8.8, over speed testing unit nut hex a8, over speed testing unit nut hex a8, piston sleeve d30 for fup for ehcc 017, piston sleeve d30 for fup for ehc 018, follow up piston for ehcadjusting screw, pin cyl b3h8x35 for follow up pistons fo, guide bush for fup for ehc 040, guide bush for fup for ehc 041, bush for follow up piston for ehc 042, bush for follow up piston for ehc 043, pin cyl bvl end 5h8x8 for follow up pi, pin cyl bvl end 8h8x20 for follow up p, pin cyl bvl end 8h8x24 for follow up p, pin cyl bvl end 10h8x28 for follow up, pin cyl bvl end 14h8x50 for follow up, follow up piston for ehc nut hex a8, follow up piston for ehc nut hex a8, follow up piston for ehc nut hex a8, follow up piston for ehcscru hex a 8 .8, follow up piston for ehc scru hex a 8.8, follow up piston for ehc coller nut, follow up piston for ehc pin cyl bvl en, collar nut hex pm12 for follow up piston, hyd amplifiercollar screw is 3749, hyd amplifiernut hex a8, pin cyl b 6h8x25 for hydraulic amplifier, pin cyl b 6h8x29 for hydraulic amplifier, pin cyl b 6h8x39 for hydraulic amplifier, pin cyl b 6h8x31 for hydraulic amplifier, hyd amplifierscru hex a 8.8, hyd amplifier scru hex a 8.8, hyd amplifier nut hex. a8, hyd amplifier grub screw is 609410.9, mop nut hex , mop nut hex a8, mop pin cyl bvl end, pin cyl bvl end 5h8x16 for main oil pu, mop screw grub slotted, mop scru hex a 8.8, mop nut hex a8, mop scru hex a 8.8, mop scru hex a 8.8, mop scru hex a 8.8, pipe assly for main oil pump assembly, grub screw is 609471 mat 10 9 em10x20 f, emergency governor nut, grub screw is 60

CTN :45612290

08 Jul, 2026 NA

Krishna - Andhra Pradesh

Tender For procurement and installation of seed testing lab equipment at dr. ysr seed research and training centre, gannavaram, krishna dt. - digital moisture meter (gac gi 2100 or equivalent), cabinet type germinator, single chamber germinator, sample steel trolleys, vacuum seed counter, digital thermo hygrometer, armed illuminated magnifier, petri dishes, sample trays, moisture meter (dickey john small) m20p, ro unit (purified water), weighing balance, purity work boards, computer system, seed divider (boerner type), table top balance, forceps 6inches, spatula 6 (nickel plated), brush, seed sampling probes (triers set), hand screen, stereo scopic binocular microscope, seed blower, watch glass, desiccator, moisture bottle, hot air oven, portable humidifier, spray pump, refrigerator, seed scarifier, rakes and scrapers for seed germination in sand, walk-in germination chamber (15ft*11ft*9ft), x-ray machine / unit, incubator (plant growth chamber), dark chamber setup, weighing balance (analytical), documentation cabinet, autoclave, hot plate, hd trend microscope tagerino, smart phone based grain vernier, planting and counting boards (small/ medium/ large), laminar air flow cabinet, steel racks, storage cabinets, germination racks, lead seals

State Government

CTN :45244313

29 Jun, 2026 1.66 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of smart energy meters with head end system services in gift city - 1200009630: 1p2w 240v 10-60a cl-1.0 smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 1 phase 2 wire, isi marked, 1.0 class accuracy, 10-60 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009631: 3p4w 240v 10-100a cl1.0 wc smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 3 phase 4 wire, isi marked, 1.0 class accuracy, 10-100 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009632: 3p4w 240v -/5a cl0.5s ct smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of 3 phase 4 wire, isi marked, 0.5s class accuracy, fully static lt current transformer (ct) operated smart energy meter with dlms protocol & bidirectional communication facility. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 2 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 0.5s for solidly earthed system with balanced and unbalanced loads having power factor in the range of zero to unity (lagging/leading). the meter shall be compatible to common meter reading instruments and other associated instruments & software for remote reading as per requirements given in this specification, 1200009630: 1p2w 240v 10-60a cl-1.0 smart meterdesign, engineering, manufacturing, inspection & testing at manufacturers works before dispatch, supply and delivery at destination (at gift store) of ac whole current 1 phase 2 wire, isi marked, 1.0 class accuracy, 10-60 a smart energy meter with dlms protocol & bidirectional communication facility & remote connect/disconnect switch. the meter shall communicate with head end system (hes) on any one of the communication technologies mentioned in is:16444 part 1 compliant with nbiot communication module fall back to 2g, as per the requirement of the utility for measurement of import and export active energy (kwh) with initial and sustained accuracy of class 1.0 for solidly earthed system with balanced and unbalanced loads havin

corporations/Associations/Others

CTN :45260953

26 Jun, 2026 8.14 Lacs

Jaipur - Rajasthan

Tender For corrigendum : tender for supply of solar pv panel topcon - 15 kw , grid connected inverter/ power conditioning unit (pcu) alongwith built-in meter , module mounting structure (mms) , structure accessories , net meter and solar meter , array junction box , dcdb , acdb , string and jumper , earthing and cable , lighting arrestors , lighting protection system (lps) , surge protection device (spds)- surge arrestor , connectors , conduits and pipes. , dc cable for string and jumper , power cable from inverter to acdb , power cable for earthing - 15 kw , ac armored aluminum cable - 15 kw , installation , testing and commissioning - 15 kw , grid islanding protection as per nit , danger boards & signages as per nit , fire extinguishers as per nit

CTN :45516479

23 Jun, 2026 2.89 Lacs

Ernakulam - Kerala

Tender For corrigendum : supply installation testing and ommissioning of 8 meter mini mast with 04nos of 150w led flood lighting system at 02 locations under vadavukode block panchayat

State Government

CTN :45591291

02 Jul, 2026 NA

Gwalior - Madhya Pradesh

Tender For quotations for calibration of various equipments of regional meter testing laboratory-single phase meter test system/ld 13086 ,three phase refrence standard/050088433 ,multi secondary voltage transform er/025022608

State Government

CTN :45596388

23 Jun, 2026 NA

Delhi - Delhi

Tender For supply, installation, testing and commissioning of electrical and mechanical equipments for shallow bore tube wells phatak bans,sawar khan, chatta mom gran, lal darwaza in matia mahal constituency ac-21. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for operation of up to 15 hp submersible set, made out of not less than 2 mm thick crca for load bearing members and 1.6 mm for doors of panel, totally enclosed, dust and vermin proof, floor mounted type. the panel size 760 mmx 1360 mm x300 mm and having (1) 63 amp change over- 1 no (2) 63 a tpn mccb -1 no (3) amp meter 0-50 a- 1 no (4) voltmeter 1 no (5) amp & volt meter selector switches-1 set (6) auto-manual + light + control mcb tp 32 amp- 1nos each (7) ct -3nos (8) push button + on/off light 2 nos each (9) 5 kvar shunt capacitor- 1 no (10) aluminium bus bar size 25 mm x 6 mm - 1set (11) 15 hp star delta starter (a) 32 amp power contactor-3 nos (b) overload relay 14-23 a -1 no (c) star delta timer- 1 no ( d) qt timer -24 hours -1 no (e) motor protection relay 200 short circuit, earth fault, phase loss, unbalance, phase reversal, locked rotor protection make:-subtec/protech/ l&t/all djb approved make, s/o pvc insulated flat submersible cable with copper conductor having three core size 2.5 sq mm 1100 volts(100mtr per roll). make- gloster/universal/havells/grandlay/djb approved, s/o g.i pipe 40mm dia medium class with threaded externally on both end socketed 6mtr long. make- jindal/tata., s/o g.i tail piece 40mm dia 600mm long medium class with threaded externally on both end. make- tata/jindal, s/o gi socket 40 mm dia with threaded internally. make: jindal/tata/djb approved, s/o gi elbow with both end having thread, size- 40mm. make: jindal/tata/djb approved, s/o gi reducer having thread on boyh end, size: 50mm to 40mm. make: jindal/tata/djb approved, s/o gi union having thread on both end, size: 40mm. make: jindal/tata/djb approved, s/o ms clamp of 600mm long 12mm thick complete with nut & bolts and washers for holding 40 mm dia pipe i/c bending & shaping etc., supply of ms bore cover 6 mm thick suitable for 100 mm dia casing in 2 pieces complete with bolting arrangement angle iron frame and provision of 40 mm dia hole in the center., supply of pvc suction hose pipe 50 mm dia 30 mtr long.make-jyoti/isi, installation of submersible pump set with pipe and other accessories, connection of cable, installation of electric panel, grouting of electric panel digging and fixing the same with the help of cc and laying of gi pipe from bore to panel executing minor civil making electrical connection with cable as required size i/c watch and ward cartage, taking all safety measures all tools and tackles. testing and commissioning of all e&m equipment on no load and full load conditions as per standard and full satisfaction of engineer-in- charge. this is a turnkey job and it further includes any left out items which may be required during execution of work will be firm responsibility & no extra payment will be paid. - s/o submersible pump set fitted with dynamically balanced ep impeller mounted on stainless steel shaft protection sleeve ep stage bowl of closed grained shorted type impeller. the pump will be directly coupled to required wet type induction motor of speed 2900 rpm suitable for operation on three phase ac, 415 volts ,50hz, 5 hp, model no j46, head-70 mtrs, discharge-200 lpm. make:bs/ksb/crompton/djb approved, supply of automatic lt panel board suitable for 415 volts, 3 phase, 50 hz, 4 wire system for opera

Central Government/Public Sector

CTN :45576859

07 Jul, 2026 NA

Erode - Tamil Nadu

Tender For supply, erection, testing and commissioning of hydraulic spring testing machine (coil scragging and load deflection testing machine) for compression/deflection testing and cycle testing of helical spring with respective load for all size of helical spring of electrical loco bogies of wap1/wap4/wag5/wag7/wap7 and wag9 locomotive along with digital load indicator and length measurement device (digital linear scale c/w read out console) and data retrievable and storage unit as per els/ed technical specification no: sr/els/ed/m1/spring testing/002, dt:16.08.24. warranty is 24 months from date of successful commissioning of the machine. ]consignee sr.dee/rs/els/ed, srtamil nadu1.00 numbersinspection details stage inspection not required2 650306610055amc (y) non stock--- yesconsigneeinr description :camc : post warranty comprehensive annual maintenance charges ( after 2 years of free warranty period ) : annual maintenance contract rates for the next five years after completion of warranty period to be given in the offer. firm to quote separately for individual year ie year 1. tab ( for 3 rd year). year 2 tab ( for 4 th year) , year 3 tab ( for 5 th year) ,year 4 tab ( for 6 th year) and year 5 tab ( for 7 th year) - clause no. 1.11 of els/ed technical specification. firm should quote actual rate of camc in the bid. discounted rate as per npv will be generated by the ireps system for ranking purpose. the rate mentioned in the po will be considered for annual maintenance contract by the consignee after completion of warranty. firm will be bound to accept the annual maintenance contract if consignee desires to go with annual maintenance contract after warranty period else wbg will be encased. annual maintenance contract charges will beprocessed as per the regular procedure through revenue allocation. [ warranty period: 2 years, annual maintenance contract period: 5 years, rate of discounting: 10 % ] [ warranty period: 2 years, annual maintenance contract period: 5 years, rate of discounting: 10 % ] ]

Co-operative

CTN :45571694

30 Jun, 2026 NA

Mumbai - Maharashtra

Tender For inspection, testing, measurement and rectification/improvement of earthing system covering lifts, meter rooms and all society wings, including submission of technical recommendations and allied works

Hydraulic Spring Testing Machine Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors