Latest hydraulic testing Tenders | Government hydraulic testing Tenders

Central Government/Public Sector

CTN :40556488

21 Jun, 2025 NA

East Singhbhum - Jharkhand

Tender For providing of facility management services - lumpsum based - commercial; annual contract for providing supporting facilities for conservancy services at moubhandar township of icc for a period of one (01) year; consumables to be provided by service provider (inclu..

CTN :40557136

20 Jun, 2025 NA

Jodhpur - Rajasthan

Tender For supply of fuel feed pump , drive shaft , cam plate , injector service kit , supporting plate , roller

CTN :40541729

19 Jun, 2025 NA

Jamnagar - Gujarat

Tender For supply of furniture for laboratory - raw water (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , compressed air (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , nitrogen (flexible tubing service valves for benchtop aeolus fumehood) (rhs) , ceiling panel , ceiling front cover panel for 5 feet aeolus fumehood , ceiling lh/ rh side cover panel for aeolus fumehood , understorage , fixed type apparatus storage cabinet for bench top enhanced fume hood (750 width) , rear support panel offixed type apparatus storage cabinet for benchtop aeolus fumehood , supply and installation of laboratory exhaust including supporting structures/hardwares including delivery, unloading the consignment and transporting it from the place of storage to the installation site, removal of debris, dirt and rubbish accumulated as a result of installation/commissioning of the same for analytical lab as per direction of engineer in charge : - , centrifugal blower & accessories , centrifugal fan with housing in pp construction & suitable stand in ms zinc plating with powder coating. inlet/outlet dia: 350mm. impeller dia: 400mm. non flp motor: 2 hp 1400 rpm. minimum cfm: 1000 @ 50 wcmm static pressure. motor make : ie2 (non flp), crompton greaves/bharat bijlee or equivalent. db level: 75. motor description: ip55, 3 phase, 440 volt , 50 hz. weather cover for motor. anti-vibration pads & m10x100 pin type anchor fasteners , blower weather cowl (frp outlet) & ms stack support with required clamps , 10 (250mm) 100% injection molded pp damper with two side flange , pp/frp ducting & accessories for fume hood & spot extractor exhaust , design, supply & installation of pp-frp ducting of wall thickness 3mm ppgl + 3mm frp for sizes up to 500mm dia, above 501mm dia 4mm ppgl + 4 mm frp shall be used unless otherwise specified. including clamps, hanging support, all hardwares required to complete ducting work. , ducting upto 500mm dia - wall thickness shall be 3 mm for pp and frp.

CTN :40545171

09 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of sofas (v2) (q3) years of past experience required for same/similar service/ * * // /0 /0 % % 2 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 40 % bid to ra enabled/ 8 %8 % :& :& : : yes bid number/ & ( ; ) : gem/2025/b/6287275 dated/ : : 30-05-2025 bid document/ 5 5 1 / 10 ra qualification ruleh1-highest priced bid elimination type of bid/ 7 7 two packet bid time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ b b inr 300000 evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ required/ g no epbg detail/ advisory bank/ j state bank of india epbg percentage(%)/ 7 (%)5.00 duration of epbg required (months)/ /0 ( ). 15 (a). emd & performance securityshould be in favour of beneficiary, wherever it is applicable./ , , n 0 o : beneficiary/ n n : director general and inspector general of police, gujarat state director general and inspector general of police, (planning & modernization division), police bhavan, first floor, sector-18, gujarat state, gandhinagar-382007. (director general and inspector general of police, gujarat state) mii purchase preference/ mii purchase preference/ yes mse purchase preference/ 2 / 10 mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates like crac to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as per the public procurement (preference to make-in -india) order 2017 dated 04.06.2020. only class-i and class-ii local suppliers as per mii order dated 4.6.2020 will be eligible to bid. non - local suppliers as per mii order dated

CTN :40545203

09 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of executive table (v3) (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 2 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 40 % bid to ra enabled/ 8 %8 % :& :& : : yes bid number/ & ( ; ) : gem/2025/b/6287672 dated/ : : 30-05-2025 bid document/ 5 5 1 / 11 ra qualification ruleh1-highest priced bid elimination type of bid/ 7 7 two packet bid primary product categoryexecutive table (v3) time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ b b inr 7050000 evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ g state bank of india emd amount/ 211500 epbg detail/ advisory bank/ g state bank of india epbg percentage(%)/ 7 (%)5.00 duration of epbg required (months)/ /0 ( ). 15 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 j % 5 75 % 5 % 7 g m 8 n (b). emd & performance securityshould be in favour of beneficiary, wherever it is applicable./ , , p 0 q : beneficiary/ p p : director general and inspector general of police, gujarat state office of the dg & ig of police, gujarat state, 1st floor, police bhavan, sector-18, gandhinagar 382007 (director general and inspector general of police, gujarat state) 2 / 11 mii purchase preference/ mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates like crac to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certifi

CTN :40511439

07 Jun, 2025 NA

Gandhinagar - Gujarat

Tender For supply of interactive panels with cpu (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 3 year (s) mse exemption for years of experience/ 2 2 // and turnover// % % 5 65 6 yes startup exemption for years of experience/ 2 2 7 % 7 % // and turnover/ / % % 7 % 7 % 5 65 6 yes document required from seller/ & & 7 7 experience criteria,certificate (requested in atc),oem authorization certificate,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no bid to ra enabled/ 9 %9 % ;& ;& ; ; yes bid number/ & ( < ) : gem/2025/b/6210983 dated/ ; : 28-05-2025 bid document/ 7 7 1 / 9 ra qualification ruleh1-highest priced bid elimination type of bid/ 5 5 two packet bid time allowed for technical clarifications during technical evaluation/ c c 7 e 7 e 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no evaluation method/ c c f f total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ required/ h no epbg detail/ required/ h no mse purchase preference/ mse purchase preference/ no mii purchase preference/ mii purchase preference/ no 1. if the bidder is a micro or small enterprise as per latest orders issued by ministry of msme, the bidder shall be exempted from the eligibility criteria of "experience criteria" as defined above subject to meeting of quality and technical specifications. the bidder seeking exemption from experience criteria, shall upload the supporting documents to prove his eligibility for exemption. 2. if the bidder is a micro or small enterprise (mse) as per latest orders issued by ministry of msme, the bidder shall be exempted from the eligibility criteria of "bidder turnover" as defined above subject to meeting of quality and technical specifications. if the bidder itself is mse oem of the offered products, it would be exempted from the "

Central Government/Public Sector

CTN :40504478

03 Jun, 2025 NA

Salboni - West Bengal

Tender For tender document for refilling, hydraulic testing and other related activities of fire extinguisher through annual rate contract at brbnmpl, salboni

Central Government/Public Sector

CTN :40496695

16 Jun, 2025 NA

Visakhapatnam - Andhra Pradesh

Tender For hydraulic testing of fire extinguishers

State Government

CTN :40494100

11 Jun, 2025 4.10 Crore

Gandhinagar - Gujarat

Tender For supply of non linear junction detector as per (mha) qrs (q3) years of past experience required for same/similar service/ * * // /0 /0 % % 3 year (s) mse exemption for years of experience and turnover/ 2 2 no startup exemption for years of experience and turnover/ 2 2 5 % 5 % no document required from seller/ & & 5 5 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc) *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 7 % 7 % 50 % bid to ra enabled/ 8 %8 % :& :& : : yes bid number/ & ( ; ) : gem/2025/b/6266314 dated/ : : 27-05-2025 bid document/ 5 5 1 / 9 ra qualification ruleh1-highest priced bid elimination type of bid/ 7 7 two packet bid time allowed for technical clarifications during technical evaluation/ b b 5 d 5 d 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ b b 41000000 evaluation method/ b b e e total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ g state bank of india emd amount/ 1230000 epbg detail/ advisory bank/ g state bank of india epbg percentage(%)/ 7 (%)5.00 duration of epbg required (months)/ /0 ( ). 40 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 j % 5 75 % 5 % 7 g m 8 n (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , p 0 q : beneficiary/ p p : dy.s.p. office of the director general of police, intelligence, g.s., gandhinagar, home department gujarat, n/a, (assistant commissioner of intelligence) mii purchase preference/ 2 / 9 mii purchase preference/ yes mse purchase preference/ mse purchase preference/ yes 1. experience criteria: in respect of the filter applied for experience criteria, the bidder or its oem of the product offered in the bid {themselves or through reseller(s)} should have regularly, manufactured and supplied same or similar category products to any central / state govt organization / psu for number of financial years as indicated above in the bid document before the bid opening date. copies of relevant contracts and delivery acceptance certificates like crac to be submitted along with bid in support of having supplied some quantity during each of the financial year. in case of bunch bids, the category of primary product having highest value should meet this criterion. 2. preference to make in india products (for bids < 200 crore):preference shall be given to class 1 local supplier as defined in public procurement (preference to make in india), order 2017 as amended from time to time and its subsequent orders/notifications issued by concerned nodal ministry for specific goods/products. the minimum local content to qualify as a class 1 local supplier is denoted in the bid document. if the bidder wants to avail the purchase preference, the bidder must upload a certificate from the oem regarding the percentage of the local content and the details of locations at which the local value addition is made along with their bid, failing which no purchase preference shall be granted. in case the bid value is more than rs 10 crore, the declaration relating to percentage of local content shall be certified by the statutory auditor or cost auditor, if the oem is a company and by a practicing cost accountant or a chartered accountant for oems other than companies as

State Government

CTN :40318521

03 Jun, 2025 1.05 Crore

Gandhinagar - Gujarat

Tender For corrigendum : supply of multifunction machine mfm (v2) (q2) years of past experience required for same/similar service/ * * // /0 /0 % % 2 year (s) mse exemption for years of experience/ 2 2 // and turnover// % % 5 65 6 yes startup exemption for years of experience/ 2 2 7 % 7 % // and turnover/ / % % 7 % 7 % 5 65 6 yes document required from seller/ & & 7 7 experience criteria,past performance,bidder turnover,certificate (requested in atc),oem authorization certificate,oem annual turnover,additional doc 1 (requested in atc),compliance of boq specification and supporting document *in case any bidder is seeking exemption from experience / turnover criteria, the supporting documents to prove his eligibility for exemption must be uploaded for evaluation by the buyer do you want to show documents uploaded by bidders to all bidders participated in bid?/ no past performance/ 5 % 5 % 40 % bid number/ & ( : ) : gem/2025/b/6221041 dated/ ; : 12-05-2025 bid document/ 7 7 1 / 10 bid to ra enabled/ b %b % ;& ;& ; ; yes ra qualification ruleh1-highest priced bid elimination type of bid/ 5 5 two packet bid time allowed for technical clarifications during technical evaluation/ c c 7 e 7 e 2 days inspection required (by empanelled inspection authority / agencies pre- registered with gem) no estimated bid value/ c c 10500000 evaluation method/ c c f f total value wise evaluation arbitration clauseno mediation clauseno bid details/ emd detail/ advisory bank/ h state bank of india emd amount/ 315000 epbg detail/ advisory bank/ h state bank of india epbg percentage(%)/ 5 (%)5.00 duration of epbg required (months)/ /0 ( ). 39 (a). emd exemption: the bidder seeking emd exemption, must submit the valid supporting document for the relevant category as per gem gtc with the bid. under mse category, only manufacturers for goods and service providers for services are eligible for exemption from emd. traders are excluded from the purview of this policy./ 2 k % 7 57 % 7 % 5 h n b o (b). emd & performance security should be in favour of beneficiary, wherever it is applicable./ , , q 0 r ; beneficiary/ q q : director general and inspector general of police, gujarat state director general and inspector general of police, (planning & modernization division), police bhavan, first floor, sector-18, gujarat state, gandhinagar-382007. (director general and inspector general of police, gujarat state) 2 / 10 mse purchase preference/ mse purchase preference/ no mii purchase preference/ mii purchase preference/ no 1. if the bidder is a micro or small enterprise as per latest definitions under msme rules, the bidder shall be exempted from the requirement of "bidder turnover" criteria and "experience criteria" subject to meeting of quality and technical specifications. if the bidder is oem of the offered products, it would be exempted from the "

Hydraulic Testing Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government