Latest hydraulic tools Tenders | Government hydraulic tools Tenders

Central Government/Public Sector

CTN :45375199

20 Jun, 2026 NA

Khadki - Maharashtra

Tender For repair replacement in maintenance of old conventional light fitting into smart led light fitting in various location of md and otm accn at range hills qmti map eme workshop mandalay line khadki under ge mh and rh khadki

Central Government/Public Sector

CTN :45356841

09 Jun, 2026 NA

Dhanbad - Jharkhand

Tender For dismantling and fitting of led lights of shatabdi workshop and filter plant in socp muraidih, amp colliery.

CTN :45340023

10 Jun, 2026 178

Mandya - Karnataka

Tender For water supply items - bl_ 6 inch threaded end cap, bl_ relay unit-motor, bl_ 7.5hp to15hp preventor, bl_ 6 inch repair collar, bl_ 5 inch repair collar, bl_ 6 inch pvc collar, bl_ 5 inch pvc collar, bl_ 6 inch pvc pipe, bl_ 5 inch pvc pipe, bl_ 6 inch pvc elbow, bl_ 5 inch pvc elbow, bl_ 6 inch pvc pipe bend, bl_ 5 inch pvc pipe bend, bl_ 6 inch plain end, bl_ 6 inch pvc tee , bl_ 5 inch pvc tee , bl_ 6 inch mta, bl_ 5 inch mta, bl_ 6 inch fta, bl_ 5 inch fta, bl_ over tank gatevalve gm rod lathe threading charge and service, bl_ starter board wiring electrical service and fitting , bl_ hand pump lifting erection and service, bl_ motor lifing erection and service fitting , bl_ motor rewinding labour and workshop turning fitting charges , bl_ volt meter, bl_ shalk thrid, bl_ 1.2 mm rewinding copper wire, bl_ relay ltlk, bl_ 7.5hp preventor, bl_ pcv tape roll, bl_ 12 stage pump, bl_ 10 stage pump, bl_ no volt coil, bl_ mrf tape, bl_ indicator, bl_ 4sqmm 3core copper cable flat type, bl_ 63amps fuse unit, bl_ 100amps fuse unit, bl_ sada electrical panel board, bl_ dol electrical panel board, bl_ electrical contact kit, bl_ dol starter ltlk, bl_ dol starter m, bl_ 7 inch cassing pipe, bl_ contactor unit, bl_ 2.5 inch bore clamp, bl_ 2 inch bore clamp, bl_ amps meter, bl_ 2 inch gi pipe, bl_ x nipple, bl_ plunger rod 3 meter, bl_ nrv lather, bl_ m-12 boltnuts, bl_ impellers, bl_ gm lower valve, bl_ gm upper valve, bl_ 0.75 inch gi tap, bl_ 0.5 inch gi tap, bl_ 1.25 inch gi pipe, bl_ 1.25 inch gi collar long, bl_ mcb 4 pole, bl_ cylinder, bl_ borewell pedestal stand, bl_ borewell water tank, bl_ borewell head, bl_ borewell handle, bl_ bucket washer, bl_ stg bush, bl_ do bush, bl_ rotor bush, bl_ bolt nut 5by8 inch, bl_ bolt nut 3by8 inch, bl_ 7.5 hp motor pump with 12 stage, bl_ 6 hp motor pump with 10 stage, bl_ thrust bearing & bottom, bl_ solvent cement 250, bl_ solvent cement 50, bl_ solvent cement 100, bl_ stick & paper, bl_ 3 inch pvc mta & fta & end cap, bl_ 2.5 inch pvc mta & fta & end cap, bl_ 2 inch pvc mta & fta & end cap, bl_ 1.5 inch pvc mta & fta & end cap, bl_ 1.25 inch pvc mta & fta & end cap, bl_ 1 inch pvc mta & fta & end cap, bl_ 0.75 inch pvc mta & fta & end cap, bl_ 0.5 inch pvc mta & fta & end cap, bl_ 1.5 inch hdpe pipe, bl_ 1.25 inch hdpe pipe, bl_ hdpe end connector, bl_ gargen pipe 1 inch , bl_ gargen pipe 0.75 inch , bl_ 1 inch cpvc union and tank nipple, bl_ 0.75 inch cpvc union and tank nipple, bl_ cpvc gum 29ml, bl_ 1 inch cpvc ball valve, bl_ 0.75 inch cpvc ball valve, bl_ 3hp v4 sm motor pump 30stage, bl_ 2hp v4 sm motor pump 20stage, bl_ 4 inch pvc pipe collar, bl_ 3 inch pvc pipe collar, bl_ 2.5 inch pvc pipe collar, bl_ 2 inch pvc pipe collar, bl_ 1.5 inch pvc pipe collar, bl_ 1.25 inch pvc pipe collar, bl_ 1 inch pvc pipe collar, bl_ 3 inch pvc joint collar, bl_ 2.5 inch pvc joint collar, bl_ 2 inch pvc joint collar, bl_ 4 inch pvc ball valve, bl_ 3 inch pvc ball valve, bl_ 2.5 inch pvc ball valve, bl_ 2 inch pvc ball valve, bl_ 1.5 inch pvc ball valve, bl_ 1.25 inch pvc ball valve, bl_ 1 inch pvc ball valve, bl_ 0.75 inch pvc ball valve, bl_ 0.5 inch pvc ball valve, bl_ 1 inch cpvc pipe, bl_ 0.75 inch cpvc pipe, bl_ 1 inch cpvc tee, fta, mta, bl 0.75 inch cpvc tee, fta, mta, bl_ 1 inch cpvc elbow & collar, bl_ 0.75 inch cpvc elbow & collar, bl_ 0.75 inch pvc pipe collar, bl_ 0.5 inch pvc pipe collar, bl_ 4 inch pvc pipe, bl_ 3 inch pvc pipe, bl_ 2.5 inch pvc pipe, bl_ 2 inch pvc pipe, bl_ 1.5 inch pvc pipe, bl_ 1.25 inch pvc pipe, bl_ 1 inch pvc pipe, bl_ 0.75 inch pvc pipe, bl_ 0.5 inch pvc pipe, bl_ 4 inch pvc elbow, bl_ 3 inch pvc elbow, bl_ 2.5 inch pvc elbow, bl_ 2 inch pvc elbow, bl_ 1.5 inch pvc elbow, bl_ 1.25 inch pvc elbow, bl_ 1 inch pvc elbow, bl_ 0.75 inch pvc elbow, bl_ 0.5 inch pvc elbow, bl_ 2 inch gi pipe nipple 1mtr, bl_ 0.75 inch gi pipe nipple 1 feet, bl_ 0.5 inch gi pipe nipple 1 feet, bl_ 2.5 inch

CTN :45352214

08 Jun, 2026 178

Mandya - Karnataka

Tender For supply of water supply items to h malligere grama panchayath - hmm_ motor rewinding labour and workshop turning fitting charges , hmm_ motor lifing erection and service fitting , hmm_ hand pump lifting erection and service, hmm_ starter board wiring electrical service and fitting , hmm_ over tank gatevalve gm rod lathe threading charge and service, hmm_ 5 inch fta, hmm_ 6 inch fta, hmm_ 5 inch mta, hmm_ 6 inch mta, hmm_ 5 inch pvc tee , hmm_ 6 inch pvc tee , hmm_ 6 inch plain end, hmm_ 5 inch pvc pipe bend, hmm_ 6 inch pvc pipe bend, hmm_ 5 inch pvc elbow, hmm_ 6 inch pvc elbow, hmm_ 5 inch pvc pipe, hmm_ 6 inch pvc pipe, hmm_ 5 inch pvc collar, hmm_ 6 inch pvc collar, hmm_ 5 inch repair collar, hmm_ 6 inch repair collar, hmm_ 7.5hp to15hp preventor, hmm_ relay unit-motor, hmm_ 6 inch threaded end cap, hmm_ 2 inch gi pipe, hmm_ amps meter, hmm_ 2 inch bore clamp, hmm_ 2.5 inch bore clamp, hmm_ contactor unit, hmm_ 7 inch cassing pipe, hmm_ dol starter m, hmm_ dol starter ltlk, hmm_ electrical contact kit, hmm_ dol electrical panel board, hmm_ sada electrical panel board, hmm_ 100amps fuse unit, hmm_ 63amps fuse unit, hmm_ 4sqmm 3core copper cable flat type, hmm_ indicator, hmm_ mrf tape, hmm_ no volt coil, hmm_ 10 stage pump, hmm_ 12 stage pump, hmm_ pcv tape roll, hmm_ 7.5hp preventor, hmm_ relay ltlk, hmm_ 1.2 mm rewinding copper wire, hmm_ shalk thrid, hmm_ volt meter, hmm_ 6 hp motor pump with 10 stage, hmm_ 7.5 hp motor pump with 12 stage, hmm_ bolt nut 3by8 inch, hmm_ bolt nut 5by8 inch, hmm_ rotor bush, hmm_ do bush, hmm_ stg bush, hmm_ bucket washer, hmm_ borewell handle, hmm_ borewell head, hmm_ borewell water tank, hmm_ borewell pedestal stand, hmm_ cylinder, hmm_ mcb 4 pole, hmm_ 1.25 inch gi collar long, hmm_ 1.25 inch gi pipe, hmm_ 0.5 inch gi tap, hmm_ 0.75 inch gi tap, hmm_ gm upper valve, hmm_ gm lower valve, hmm_ impellers, hmm_ m-12 boltnuts, hmm_ nrv lather, hmm_ plunger rod 3 meter, hmm_ x nipple, hmm_ 2hp v4 sm motor pump 20stage, hmm_ 3hp v4 sm motor pump 30stage, hmm_ 0.75 inch cpvc ball valve, hmm_ 1 inch cpvc ball valve, hmm_ cpvc gum 29ml, hmm_ 0.75 inch cpvc union and tank nipple, hmm_ 1 inch cpvc union and tank nipple, hmm_ gargen pipe 0.75 inch , hmm_ gargen pipe 1 inch , hmm_ hdpe end connector, hmm_ 1.25 inch hdpe pipe, hmm_ 1.5 inch hdpe pipe, hmm_ 0.5 inch pvc mta & fta & end cap, hmm_ 0.75 inch pvc mta & fta & end cap, hmm_ 1 inch pvc mta & fta & end cap, hmm_ 1.25 inch pvc mta & fta & end cap, hmm_ 1.5 inch pvc mta & fta & end cap, hmm_ 2 inch pvc mta & fta & end cap, hmm_ 2.5 inch pvc mta & fta & end cap, hmm_ 3 inch pvc mta & fta & end cap, hmm_ stick & paper, hmm_ solvent cement 100, hmm_ solvent cement 50, hmm_ solvent cement 250, hmm_ thrust bearing & bottom, hmm_ 0.75 inch cpvc elbow & collar, hmm_ 1 inch cpvc elbow & collar, hmm_ 0.75 inch cpvc tee, fta, mta, hmm_ 1 inch cpvc tee, fta, mta, hmm_ 0.75 inch cpvc pipe, hmm_ 1 inch cpvc pipe, hmm_ 0.5 inch pvc ball valve, hmm_ 0.75 inch pvc ball valve, hmm_ 1 inch pvc ball valve, hmm_ 1.25 inch pvc ball valve, hmm_ 1.5 inch pvc ball valve, hmm_ 2 inch pvc ball valve, hmm_ 2.5 inch pvc ball valve, hmm_ 3 inch pvc ball valve, hmm_ 4 inch pvc ball valve, hmm_ 2 inch pvc joint collar, hmm_ 2.5 inch pvc joint collar, hmm_ 3 inch pvc joint collar, hmm_ 1 inch pvc pipe collar, hmm_ 1.25 inch pvc pipe collar, hmm_ 1.5 inch pvc pipe collar, hmm_ 2 inch pvc pipe collar, hmm_ 2.5 inch pvc pipe collar, hmm_ 3 inch pvc pipe collar, hmm_ 4 inch pvc pipe collar, hmm_ 2 inch gi non return valve, hmm_ 2.5 inch gi non return valve, hmm_ 0.5 inch gi pipe nipple 1 feet, hmm_ 0.75 inch gi pipe nipple 1 feet, hmm_ 2 inch gi pipe nipple 1mtr, hmm_ 0.5 inch pvc elbow, hmm_ 0.75 inch pvc elbow, hmm_ 1 inch pvc elbow, hmm_ 1.25 inch pvc elbow, hmm_ 1.5 inch pvc elbow, hmm_ 2 inch pvc elbow, hmm_ 2.5 inch pvc elbow, hmm_ 3 inch pvc elbow, hmm_ 4 inch pvc elbow, hmm_ 0.5 inch pvc pipe, hm

CTN :45331832

10 Jun, 2026 NA

Bardhaman - West Bengal

Tender For providing of custom bid for services - handling of productive and non-productive materials as well as execution of welding, machining, fitting activities and crane operating at poniati workshop

State Government

CTN :45301374

29 May, 2026 NA

Barasat - West Bengal

Tender For repairing of 1 no. of 315 kva dtr ( indoor type ) with supply of materials and testing at rabindra bhawan, barasat under north 24 parganas zilla parishad. - hv bus hing 12 kv 630a , lv bus hing 1.1 kv 630a, , 1.1kv 630a stud-bolt with fittings - brass, , 34kv 250a stud-bolt with fittings - brass, , arcing horn, , insulating materials raman make, , insulating materials senapati 0.75mm, , cotton tape 315 kva, , gasket sheet 6 mm, , ms nuts, bolts & washers, , oil seal hvside, , oil seal lyside, , silica gel breather with silica gel of 500gm, , hv coil copper dpc, , loss 5% allowed, , transformer oil (ehv grade), , labour charges, , final survey with repairing charge 315 kva, , re-assembly & boxing up of 315 kva including testing, , external painting 315 kva, , preparation & fitting of new coil - dpc (for hv cu coil), , preparation & fitting of new coil - dpc (for lv coil), , re winding of existing coil - dpc (for lv cu coil), , dismantling & re-installation of 315 kva transformer with necessary connection of terminals, earthing etc. at site, , transportation of transformer and oil barrels from site to workshop and vice versa

State Government

CTN :45289480

30 May, 2026 NA

Palamau - Jharkhand

Tender For renovation of electro mechanical items for rural ws scheme, lesliganj - part a (raw water p/plant mali river at sitadih ), cost towards repairing and overhauling of 50 h.p. v.t. pump set multiple stage ball assembly s/f impeller g.m. bush as per sample 5 nos each, s/f housing bush as per sample. replace in spider rubber cutless bush 5 nos, replacing of 25mm dia. 5 feet long s.s. line shaft 4 nos with s.s. socket . transportation charge from site to work shop vice versa including tools tackles and labour charges for lifting & lowering v.t. pump before and after repairing work etc all complete at pumping plant., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 50 h.p. 440 volts, 50 c/s, star delta, 3 phase hollow shaft v.t. motor by supplying super enameled copper wire & binding, tapping varnishing, heating, testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 2 nos, timer 1 no., thermal over load release relay 2 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., cost towards supplying & fitting 35 mm2 3 core copper conductor 15 mtr panel to motor., cost towards supplying & fitting 60 watt led street light (jsor-m840), part b (clear water lesliganj.), cost towards repairing/ replacement of 200 amp motor control panel board consisting of incoming feeder mccb 200 amp 1 no. and outgoing feeder mccb 100 amp 3 nos, timer 1 no., thermal over load release relay 3 nos. supplying and fitting of digital volt meter (0-500v) squared type 2 nos, ammeter (0-125amp) squared type 2 nos and replacement of phase indicator lamp 3 nos. including internal wiring etc all complete., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots of stator by brush & petrol then complete rewinding of 20 h.p. 440 volts, 50 c/s, star delta, 3 phase induction motor by supplying super enameled copper wire & then tapping varnishing, heating & testing on full load and repairing of stator & rotor, changing of bearings as per sample skf make with including the deduction of cost of burnt copper wires and transportation charges from p/plant to workshop and back to the same . including tools & tackles and labour charges etc all complete at p/plant., cost for repairing of 20 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., cost towards varnishing, heating of winding & greasing of both side ball bearing of 25 h.p. induction motor 3 phase, 1440 rpm, volt 410 10% 50 cycle along with supplying & fitting of tyre coupling 2 nos, then testing on full load at site including supply of all labour tools and tackles., cost for repairing of 25 h.p. c/f pump with m/s/f s.s. shaft as per sample 1 no. c.i. gland tightner 2 nos, c.i. bearing housing 2 nos, ms. check nut 2 nos, c.i. neckring 2 nos, ball bearing s.k.f. as per sample 2 nos, all labour tools & tackles and materials with loading and unloading transporting charge from site to workshop & vice versa., supplying all labour tools and tackles for complete opening, dismantling , cleaning of its slots o

State Government

CTN :45275642

02 Jun, 2026 3.07 Lacs

Serampore - West Bengal

Tender For repairing and overhauling of one no twin lobe air blower assembly and renovation of 2 nos outgoing motor (blower ) feeder of lt pdb with supply, fitting and fixing spares at sludge pump house under swtp, kmda. - supply,installation,testing and commisioning of following items for hoisting system/ blower and gear box as mentioned below as per direction including cost of materials, machinaries , manpower, cutting,machining,aligning,anchoring,welding,finishing,consumables, carriage and all overheads with all leads and lifts complete as per specification (without painting), i) base frame (ms), ii) shaft/pin with key ways made of ss-304, iii) gear& pinion (forged steel), supply and fixing the 3way c.i v grooved pulley with complete mechanism key way suitable to en-24, 60 mm dia/ as per sample of shaft end., a) motor driving, b) blower driving, supply of gear oil as per direction of engineer in charge., supply of grease, supply and delivery of the following bearing (make: skf):, i) 22312e/c3/ as per sample. (for blower), supply and fixing of tough v belts (make: fenner/power boom / v guard/benq/ecodrive) of the following size c 98/ as per sample., supply fitting fixing of ss (aisi304) bolts,nut & washer i) dia 10 mm to 20 mm a) length upto 75 mm, refixing of impeller of blower after dynamic balancing in workshop as per is rule after dismantling the same., dismantling the 25/30 h.p (18.5 kw)//30 h.p squirrel cage motor from its foundation by opening mounting bolts and disconnection of cables from terminal box and open the v belts for repairing purpose (in condition), preliminary checking of the whole motor (lt sq. cage im) and testing of i.r. value, load currents, leakage factor of stator & rotor, terminal lead joints of stator connection ends, insulation of glass fibre terminal bar, double cage rotor end rings and all of motor bars and bar joints, housing of d.e. & nde shield bearing housing etc. before work to detect fault., complete servicing and heat varnishing of 415volt, 3 phase l.t. sq. cage induction motor after cleaning the stator and heating it up periodically and varnishing by dr. beck s graded insulating varnish to obtain stable ir value, cleaning up the rotor, including heating for demoisturisation, lacker coating on the surface of rotor stampings, cleaning and ro priming on the end shield covers, bearing housing and complete the necessary repairing works as per direction of e.i.c.upto 75kw lt sq. cage im ], re fixing the 25/30h.p star/delta squirrel cage motor over its foundation by mean of mounting bolts & nuts, washer complete connection of existing led of cable at the terminal box and wear the v belts with proper alignment in respect to i.d. fan (12000 cu m/hr capacity)/ blower by adjusting the side rail for smooth running., finishing the end of terminal leads by s & f dowells copper sockets properly supplying tapes, petrollium jelly etc. 6 nos.upto 75kw lt sq. cage im., cost of mechanical work viz. shaft truness, checking key way looping of holes grinding and polishing etc. upto 75kw lt sq. cage im., inspection checking/testing and servicing of the existing starter panel, all terminal connection, contactors, relays etc as per desired technical specification including man and minor materials for proper functioning as per direction of eic., supply and fixing of 240/230 volt, 50 hz, t.p., power contactor (make: l & /abb/schneider/ simence/ ge) having contact block of the following range.32-55amp, supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) blue/ white color., supply & fixing of 230/240v, led indicating lamp make :ae/kappa/imp) other than blue/ white color., supply and delivery of thermal overload relays (make: l & t/abb/schneider/simence/ ge/minilec) of the following range:a) 0.2-0.33/ 0.3-0,5/ 0.45-0.75, mn2, supply of ammeter selector switch current in each phase with off, 4 pos. 90 angle ofthrow (off-r-y-b) , supply and fixing of analog ammeter ranging

Central Government/Public Sector

CTN :45252846

18 Jun, 2026 NA

Multi City - Multi State

Tender For dropping & fitting of cbc and draft gerar assembly with lock bolting/ riveting; stripping & fitting of striker casting with lock bolting/ riveting in boxn (all variants) wagons; and reconditioning of rf-361 type of draft gear and magnetic particle test (mpt) of various components of cbc with material at wagon repair workshop, badnera for a period of six months.

Central Government/Public Sector

CTN :45235182

26 May, 2026 NA

Multi City - Maharashtra

Tender For auction sale of others - scrap released industrial waste products unserviceable for railway use 1 coal /coke ashes debris steam coal and hard coke dust scrap pieces of u/s fire bricks 2 broken piece of plain and color glass mirror porcelain washbasin commode crockery item etc.3 u/s cotton rag canvas released from coaches old unusable hand gloves aprons etc 4 u/s rubber items window sealing rubber foam pieces gas rubber hose pipes shutter felts damaged & condemned rubber hose and pvc pipe pieces damaged torn vacuum hose pipes without universal couplings small broken pieces of rubber released from roof of the coaches & glass wool 5 unusable timber plywood wooden scrap pieces of compreg ply broken slates pieces of berth shutter panel etc scrap broken pieces of released packing wood timber jolly board condemned wooden seats without rexene & ferrous fittings wood shavings mixed with sand & rubbish 6 released packing material rubber fibre wooden polythene bags gunny bags card board paper puttah gatta thermocole etc. broken and u/s pieces of asbestos cement sheets released from shops 7 unserviceable old lp sheet including pop rivet seat berth number plate unuseable off cuts of new lp sheet unusable pieces of limpet /nftc sheet 8 floor sweeping consisting of sand mud mud muck scrap paper shrubs tree branches including dried grass & leaves coach-rust rusty nails screws and washers u/s aluminum rivets mixed with sweepings and ashes from burn material mud and muck includes unserviceable pieces of stones boulders broken concrete foundations and u/s pieces of other bricks oily greasy rags oily dirt and mud mixed with rubbish heaps excluding sludge oil 9 unserviceable off-cuts of fresh rexene pvc sheet coir recron foam released and unserviceable rexene pvc sheet coir recron foam 10 unserviceable frp products like window shutters louvers inlay lavatory wall protectors wash basin fish tails banjo shutter front cover or axle box mouldings 11 u/s nylon plastic bushes nylon wire rope and other nylon items broken welding hand screen helmet face shield 12 u/s bakelite bakelite box with screws broken and condermned bakelite cover of tumber switch and fuse without non-ferrous fitting mcb with embedded material except aluminum and copper, ceramic pieces plastic pvc sheet and sleeves broken pieces of electric switches battery floats flexible pipes unserviceable broken tube lights and bulbs fuse without non-ferrous fittings broken damaged pieces of insulating material 13 engineering garbage not required by iow and generated inside workshop like tree branches loose earth etc 14 following unserviceable items released from poh activities -bp and fp houses with end ferrous parts, unserviceable buffer pads and draft pads, frp main door embedded with ferrous window bars handle latch etc frp window shutters with embedded ferrous material, unserviceable lavatory door vestibule door fiied with latch/handle and ferrous mouldings etc, hdpe commode chute with ferrous bracket and supporting ring,plastic spool with end pieces of filler wire. 15 ferrous pieces mixed with rubbish weighing not more than 500gms 16 any item of industrial waste not covered above as advised in writing by the site engineer in charge. as is where is basis. loading by purchase. location of material : site c i.e. 100 kld etp plant/lower parel workshop/ maharashtra. custodian :sse/ys/pl(total approximate weight 50 mt.) note 1)the above items are expected generation of various items in the workshop. the railway does not guarantee availability of all types of industrial waste at all times in the same proportion some item may be even zero 2)the railway will not accept any claim for availability of any specific items or their quantities 3)no material other than above shall be permitted to be lifted 4)mode of delivery will be in metric tonne. no sorting & pick and choose of material will be allowed.

Hydraulic Tools Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

State Government

State Government

State Government

Central Government/Public Sector

Central Government/Public Sector