Get complete information related to latest Hydraulic Valve Tenders . from India at Classic Tenders. Search the best available tenders from Indian government tenders, domestic Hydraulic Valve Tenders , private tenders, online tenders, tender invitation notice, business tender notices, online tenders and bidding Hydraulic Valve Tenders.
Tender For supply of vrf or vrv airconditioning system for circle office madurai d d - si of vrf outdoor units , sitc of vrf idu , supply of cordless remote controller with receiver for 4-way cassette. , sitc of lcd touch screen , refnet joints , lifting and shifting charges of odu from gf to sf , lifting and shifting charges of odu from gf to tf , lifting and shifting charges of idu from gf to tf , pressure testing and pressure holding nitrigen , testing and commissioning of vrf systems , refrigerant pipe for vrf system , communication cable , drain piping with 9 mm thick nitrile rubber insulation. , supply and charging of r-410a refrigerant , protective glass wool tape above the copper pipes , 2.5 inch pvc pipe for exposed coppe pipes area , sitc of underdeck insulation of ceiling , supply and fixing of ms angle iron, channel, chequered plates with 2 coats of primer, 2 coats of enamel paint and complete in all respect etc. , perforated cable tray , ventilation fans , gi round duct 22swg , powder coated extruded aluminium of 18 g disc valve , supply and installation of insulated flexible ducting, complete with connecting rings, aluminium foil tape, duct supports etc. , dx system biq , supply, installion and testing of interconnecting copper refrigerant pipe , electrical power cable from power mcb to odu , control cable between idu to odu with conduits and necessary fittings and accessories. , insulated pvc drain piping for indoor unit with 9 mm thick nitrile rubber insulation. , comprehensive amc charges , buyback offer for acs
Tender For supply of spare parts edg c c - 3 by 8 inch x500 lg ss corrugated hose for 4.2mw edg 18pa6v part no. 75.170.39.0.00 , sr no 19 supply of hose pipe for 4.2mw edg 18pa6v part no. 74.423.09.0.00 , sr no 20 supply of banjo bolt for 4.2mw edg 18pa6v part no. 50.538.04.0.00 , sr no 21 supply of banjo bolt for 4.2mw edg 18pa6v part no. 79.093.04.0.00 , sr no 22 supply of banjo bolt for 4.2mw edg 18pa6v part no. 79.267.25.0.00 , sr no 23 supply of banjo bolt for 4.2mw edg 18pa6v part no. 50.504.06.0.00 , sr no 24 supply of banjo bolt for 4.2mw edg 18pa6v part no. 75.172.55.0.00 , sr no 25 supply of banjo connection for 4.2mw edg 18pa6v part no. 50.503.03.0.00 , sr no 26 supply of banjo connection for 4.2mw edg 18pa6v part no. 50.504.04.0.00 , sr no 27 supply of banjo connection for 4.2mw edg 18pa6v part no. 50.503.09.0.00 , sr no 28 supply of banjo coupling for 4.2mw edg 18pa6v part no. 76.051.05.0.00 , sr no 29 supply of banjo coupling for 4.2mw edg 18pa6v part no. 76.056.91.0.00 , sr no 30 supply of banjo coupling for 4.2mw edg 18pa6v part no. 72.364.23.0.00 , sr no 31 supply of banjo coupling for 4.2mw edg 18pa6v part no. 74.137.11.0.00 , sr no 32 supply of banjo coupling for 4.2mw edg 18pa6v part no. 74.137.24.0.00 , sr no 33 supply of banjo coupling for 4.2mw edg 18pa6v part no. 75.172.05.0.00 , sr no 34 supply of banjo coupling for 4.2mw edg 18pa6v part no. 81.180.05.0.00 , sr no 35 supply of cylinder head cover assembly for 4.2mw edg 18pa6v part no. 74.466.50.0.00 , sr no 36 supply of o-ring for head cover for 4.2mw edg 18pa6v part no. 74.466.02.0.00 , sr no 37 supply of screw for head cover for 4.2mw edg 18pa6v part no. 79.034.80.0.00 , sr no 38 supply of washer for head cover for 4.2mw edg 18pa6v part no. 79.119.09.0.00 , sr no 39 supply of connection for injector connection assembly for 4.2mw edg 18pa6v part no. 79.042.22.0.00 , sr no 40 supply of bush viton for injector connection assembly for 4.2mw edg 18pa6v part no. 79.041.19.0.00 , sr no 41 supply of sheathed injection pipe for 4.2mw edg 18pa6v part no. 79.101.01.0.00 , sr no 42 supply of sleeve for injecting piping assembly for 4.2mw edg 18pa6v part no. 79.101.02.0.00 , sr no 43 supply of o-ring for injecting piping assembly for 4.2mw edg 18pa6v part no. 79.101.03.0.00 , sr no 44 supply of o-ring for injecting piping assembly for 4.2mw edg 18pa6v part no. 79.101.04.0.00 , sr no 45 supply of o-ring for liner assembly for 4.2mw edg 18pa6v part no. 79.026.02.0.00 , sr no 46 supply of gasket for cyl head for 4.2mw edg 18pa6v part no. 79.029.32.0.00 , sr no 47 supply of sleeve nylon for fuel feed pump for 4.2mw edg 18pa6v part no. 79.076.46.0.00 , sr no 48 supply of oil seal for fuel feed pump for 4.2mw edg 18pa6v part no. 50.302.33.0.00 , sr no 49 supply of o-ring for fuel feed pump for 4.2mw edg 18pa6v part no. 27.011.28.0.00 , sr no 50 supply of gakset for fuel feed pump for 4.2mw edg 18pa6v part no. 27.068.02.0.00 , sr no 51 supply of spacer for fuel feed pump for 4.2mw edg 18pa6v part no. 27.068.01.0.00 , sr no 52 supply of pressure relief valve set pr. 43 bar, end connection 1 by 2 inch npt male for air receiver tank for 4.2mw edg 18pa6v part no. 75.564.11.0.00 , sr no 53 supply of pressure relief valve set pr. 8 bar, end connection 1 by 2 inch npt for pre-heating module for 4.2mw edg 18pa6v part no. 75.557.11.0.00 , sr no 54 supply of safety slide valve assy for 4.2mw edg 18pa6v part no. 76.046.10.0.00 , sr no 55 supply of spring for safety slide valve assy for 4.2mw edg 18pa6v part no. 79.161.43.0.00 , sr no 56 supply of plug for safety slide valve assy for 4.2mw edg 18pa6v part no. 79.161.45.0.00 , sr no 57 //bid details 2 / 52 4.2mw edg 18pa6v part no. 79.161.45.0.00 , sr no 57 supply of viton oil seal for safety slide valve assy for 4.2mw edg 18pa6v part no. 79.161.50.0.00 , sr no 58 supply of o- ring for safety slide valve assy for 4.2mw edg 18pa6v part no. 79.161.51.0.00 , sr no 59 supply of o-ring for safety slide valve assy for 4.2mw edg 18pa6v part no. 79.16
Tender For tender for supply of led indicators for ryb phase 220 v , 22 , mcb / isolators at mains 3 phase 440 v ac 10a , transformer 415/220 ac 45 va , led indicators 220 v , rtd 3 wire pt100 for evaporator pt100 rtd (platinum resistance temperature detector) temperature range -20 degc to +850 degc (+328 deg f to +1562 deg f) , rtd 3 wire pt100 for h2 in or out pt100 rtd (platinum resistance temperature detector) temperature range -20 degc to +850 degc(+328 deg f to +1562 deg f) , cyclic timer (220v ac , setting at 2 hr. on-0.5 hr off) , auto/manual selector dpdt , 6a , 220v ac) allows switching between automatic and manual control modes. , toggle switch auto manual selector & on/off , remote /control card with ac to dc convertor (220v ac to 24v dc) , digital temprature indicator (3.5 digit to 0-99.9 deg rtd class b pt 100 3 wire rtd as sensor) , digital temprature controller with delay timer (3.5 digit 0-10 deg adjustable , dual set point with 10 deg hysterisis and 2 set points , time delay adjustable 0-100 sec sensor 3 wire rtd) , voltmeter (300v , 72x72) , amp. meter (ammeter 0-10a , 72x72) , contactor for compressor (coil 220v 50 hz) , contactor for motor (coil220 v 50 hz) , over load relay for compressor 3 phase , 440v ac) , over load relay for motor (3 phase , 440 v ac) , compressor (3 phase , 440 v 4360 kcal/hr) , fan motor 3 phase , 440v flame proof 0.5 hp is2148 , fan blade (15 inch) typically features aerodynamically designed blades for efficient air moement and reduced noise. , condensor (4 row 16x18 , 3/8 copper with copper with al fins ) , freon receiver (1.5 ton , steel fabricated with copper connection) , freon drier filter (3/8 dcld63) , accumulator (1.5 ton , steel fabricated with copper connection) , hand shut off valve1/2 inch (brass body with ss pin) , hand shut of valve 1/4 inch (brass body with ss pin) , hand shut off valve 3/8 brass body with ss pin) , pressure guage 500 psi (350 psi operation value 20 psi to 35psi) , pressure guage 500 psi (500 psi operation value 200 psi to 70 psi) , water collection chamer ss 316 (fabricated complete in stainless steel , including 2 nos of ss drain valve & complete ss drain line nb20 from evaporator recommended by the oem 0 chance of break and escape of hydrogen. , capillary (0.64 copper tube with stainer) , drain valve (dn15 , cs body ss ball , teflon seat) , hp/lp pressure switch (kf -15/mp-15 , low set point at 5 psi and high set point at 350 psi) , complete precooler in (ss316) with inbuilt copper bundle , end plates and flanges , complete evaporator in (ss316) with spiral form cooling coil ( only with 4 joints instead of 104) , h2 interconnections ss316 welded with 4 flanges , spiral form cooling coil only for evaporator (only with 4 joints instead of 104) , refrigerant gas (r-407) (8 kg) in cylinder , gaskets (1 set) (neoprene) made from high-quality rubber of silicone) , flare nuts (1 set) refrigeration brass flare nuts , designed to fit standard refrigeration tubing sizes and flare fittings. , thermostatic expansion valve 3by8 function regulates the flow of refrigerant into the evaporator coil based on temperature and pressure conditions. , theromowell in ss316 250 mm , solenoid valve 3by8 flare fitting
Tender For supply of 25py1c001 c c - 25py1c001 c c - 055-10-15 pnumatic on delay timer range , eh8015d- 502-09-055-10-31 ammetero-75a , eh8015d-lc1 d18m7 contactors rated 18 a 240v ac coil with 1no inc contact , eh8015d-k-125xl single phase duct fan , eh8015d k-160xl single phase duct fan , eh8015d-k 200l single phase duct lan , eh8015d-k-250l single phase duct fan , eh8015d kgefc-16-13-0120 impeller for ref sw pump , eh80t5d-kgefc -16 -13-0310 mechanical seal for rev seawater pump , eh8015d lc1 d09m7 contactors rateo 9 a 240v ac coil with 1nd anc contact , eh8015d lc1-d12m7 contactors rateo 12 a 240v ac coil with 1no 1nc contact , eh8015d -osk-361-338 04 discharge shut off valve complete , eh8015d-osk 372 823 01 set of gasket , eh8015d-rsb2a080bds 24v dc relay , eh8075d - rsb2a080p7s 230v ac relay , ehb015d-st-0 37-kw stator for 3 phase motor , eh8015d-st-0-55-kw ststor for 3 phase motor , eh8015d-st-11-kw stator for 3 phase motor , eh8015d st-15-kw stator for 3 phase motor , eh8015d st-3-7-kw stator for 3 phase motor , eh8015d-st 7-5 kw stator for 3 phase motor , eh8015d-347022-01 thermostat for oa 1854 , eh8015d-502-09-055-07-01 butter fly valve 125 mm nb , eh8015d-502-09-055-08 11 angle valve 1 4 , eh8015d- 502 09-055-08-12 charge valve , eh8015d-502-09-055 08-15 thermostat expansion valve , eh8015d-502-09- 055-09-02 diffuser , eh8015d 502 09-035-10 24 under voltage relay , eh8015d-502 10-043-13 set of five v belts , eh8015d-502 10-043-31 core for liquid line filter drier , eh8015d-502-10-043-32 angle valve 1 4 npt charging valve , eh8015d-502-10 043-52 buzzer cum flasher 230v ac , eh8015d 502 13-040 12-46 expansion valve danfoss model ten 20 18 orifice 1 , eh8015d-502-13 040 12-47 expansion valve danfoss model orifice 2 , eh8015d-502-13-040 12-60 water pressure switch , eh8015d-502-13-060-10 25 25 ansi vibration mount used for ac , eh8015d-502-13-060- 29a water flow switch 1 each for ac cw line , eh8015d-502-16-025 15-02 a corrosion protecton plug , eh8015d 502 16 025 16-01-of oil filter , eh8015d-502 16-025 16 02 a corrosion protecton plug , eh8015d-cf 160-1220 mechanical seal for chilled water pump , eh8015d-csh 7693-36110602 pressure relief valve for ac compressor , eh8015d ct-0-37 kw motor cooling fan , eh8015d-ct-0-55 kw motor cooling fan , eh8015d-ct-3-7-kw motor cooling fan , eh8015d-ct-7-5-kw motor cooling fan , eh8015d cv-502 13 060 239 water flow switch , eh8015d cv-65-160 2260 bearing for chilled water pump , eh8015d-cv-80 160-1220 mechanical seal for ac seawater pump , eh8015d cv-80-160-2250 2260 bearing for ac seawater pump , eh8015d-fs-160m 5110 ahu-1 motor 9 3kw 4pole , eh8015d fx14-1366- 8498 set valve plate , eh8015d fx14-1366 8795 set oil pump , eh8015d 502-09-055-01 24 hp gauge , eh8015d 502-09-055-08-gb thermostat model up 69 eh8015d-502-10-043-21 pressure safety valve for condenser receiver, eh8015d 502-10 043-37 globe valve 5 8 ods, eh8015d-50206043012 06 high pressure switch kp-5 reset type, eh8015d-7 -5 kw-de-6208zz bearing of 3 phase mdtor, eh8015d -7-5-kw-nde- 6208zz bearing of 3 phase motor, eh8015d-a1-0032 - 14a key coupling, eh8015d-ats 22c11q softstarter- ac, eh8015d 502 09 055-07-03 sdnr 100 mm nb, eh8015d 502 13-040 -12- 32 1 3 8 globe valve, //bid details 2 / 62
Tender For tender for supply of hydraulicvalves and compensator : : - as per attached tender specification of item 1 in nit checklist , as per attached tender specification of item 2 in nit checklist , as per attached tender specification of item 3 in nit checklist , as per attached tender specification of item 4 in nit checklist , as per attached tender specification of item 5 in nit checklist , as per attached tender specification of item 6 in nit checklist , as per attached tender specification of item 7 in nit checklist , as per attached tender specification of item 8 in nit checklist , as per attached tender specification of item 9 in nit checklist , as per attached tender specification of item 10 in nit checklist , as per attached tender specification of item 11 in nit checklist , as per attached tender specification of item 12 in nit checklist , as per attached tender specification of item 13 in nit checklist , as per attached tender specification of item 14 in nit checklist
Tender For corrigendum : supply of air receiver 10 cum as per apsq - 94 , foundation bolts and nuts as per apsq -094 , safety valve with bolts, nuts and gasket as per apsq 094 , ball valve with piping assembly as per apsq 094 , auto drain trap assy as per apsq 094 , pr gauge with needle valve and piping