Latest hydro meter Tenders | Government hydro meter Tenders

Central Government/Public Sector

CTN :45329483

24 Jun, 2026 12.61 Lacs

Nagrota - Himachal Pradesh

Tender For corrigendum : provision of 01 x 30 kva genr with connected items as standby power requirements for sewage treatment plant under age (i) bhalra - supply, installing, commissioning and testing, water cooled, sound proof silent type, turbo charged, diesel engine driven generating set 30 kva (at 0.8 pf), 415v, 3 phase, 4 wire engine as per is: 10001/10002 and alterator as per is: 13364, complete with relay panel for automatic starting on mains failure, control panels having meters in an integral acoustic enclosure as per recommendation cpcb norms, comprising of the following:notes: quoted rates shall deemed to include the following also:-(i) supply of t and p and normal space ie., bi-hexagonal ring spanner set of 12 pieces - 01 set.(ii) fuel measuement gauge - 01 no, hand operated fuel lifting pump with steel pipe 40mm dia - 01 no, hydro meter - 01 no, set of fan belt, oil/ fuel filters initial filling of coolant (coolant-2liters).(iii) service maintenance manual along with cat part list and price list - 03 set each.(iv) make of engine and alternator will be got approved from age (i) bhalra before placing the order., (a) diesel engine. diesel engine developing suitable bhp, 1500 rpm inclusive of the following standard accessories:(i) radiator/ heat exchanger cooling system. (xiv) battery charging generator.(ii) spider coupling guard. (xv) industrial silencer.(iii) fly wheel. (xvi) lubricant oil cooler.(iv) fly wheel housing complete with starter gear ring and coupling. (xvii) flexible pipe for silencer. (v) fuel pipes. (xviii) battery volt meter.(vi) air cleaner. (xix) water temperature gauge, lub oil pressure (vii) fuel and lubricant oil filter. gauge.(viii) by pass filter. (xx) speedo meter and engine running hours meter.(ix) coolant inhibitor. (xxi) display for fault.(x) fuel pump. (xxii) turbo charger.(xi) water pump. (xii) lubricant oil pump.(xiii) self/electric starter.(b) alternator : synchronous alternator 3 phase 4 wire, 50 cycles 1500 rpm, self excited, self regulated, brushless type, 0.8 pf, 415v, ac supply, 30 kva capacity, copper wound, complete including necessary tools, mounted on strong rigid steel fabricated base frame and directly coupled through flexible coupling with diesel engine, complete all as specified and directed., (c) amf/ control panel : amf panel factory made of suitable capacity as per original equipment manufacturer make and specification or as approved by oem for dg set of capacity 30 kva of suitable size, indoor cubical type, front and back openable fabricated out of mild steel sheet 1.6mm thick grounted in floor with adequate pcc foundation and minimum consisting of following :(i) contactor of suitable size for 30 kva dg set.(ii) copper bus bar of suitable current rating and sensitivity relay set unit with auxiliary cts.(iii) electronic latch circuit with tripping indication.(iv) re-set facilities.(v) 3 phase mvr relay unit with single phase protection complete with 2 no nc auxiliary contacts.(vi) 3 phase avr relay unit complete.(vii) self sequential starting relay unit 12 volts dc complete with alarm and power contactor. (viii) electronic timer 220 volts for main contactor with 1 no nc auxiliary contactor.(ix) electronic timer 220 volts for fuel cut off operation with 1 no auxiliary contactor.(x) battery charging 2x12 volts 10 amp complete with digital voltmeter and amps meter, including trickle and boost charging, make : su-kam, amco, exide or any other make as recommended by the manufacturer.(xi) volt meter 0-500 volts panel mounting of size 96mm square with selector switch digital type.(xii) amps meter 0-100 amps with 3 nos cts, 400/5 and selector switch 96 mm square digital type.(xiii) frequency meter (45-55) hz, 415 volt, 96mm square digital type.(xiv) the amf panel should have manual by pass arrangement too in case of failure of amf panel., (d) fuel tank of capacity as per manufacturer recommendations.(e) base frame made out of suitable channel duly reinforced and provided with adequate nu

Central Government/Public Sector

CTN :45536991

03 Jul, 2026 NA

Malkangiri - Odisha

Tender For supply of tyre size 90 90 17 , tyre size 215 75 r 15lt 115 113 s , tyre size 215 75 r 15 , tyre size 6 00 16 sl , tube size 6 00 16 sl , insulation tap black , m seal , hydro meter , tube less tyre puncher repair kit

CTN :45303622

02 Jun, 2026 NA

Kargil - Jammu And Kashmir

Tender For supply of wrench , welding holder , glass for welding , ms welding electrode 5mmx350mm , ms welding electrode 50x350mm , ms welding electrode size 15x350mm , almight grease gun 20 kgs , hydraulic jack 10 ton , jack hydraulic 12 ton , jack hydraulic 15 ton , jack hydraulic 20 ton , dee spanner 6mm to 32mm , ring spanner 6mm to 32mm , ring spanner set of 12 pcs , box spanner , tyre pressure gauge , heavy duty socket set , light duty socket set , star screw driver , allen key set , number punch , detachable pocket screw driver , steel jerrican , hand pump , hand drill , multi meter , battery terminal positive , battery terminal negative , hydro meter , hydraulic pressure testing gauge , grease gun 10 kgs , grease gun 20 kgs , grease gun nipple set , gi wire , ms welding rod , crocodile clip positive , crocodile clip negative , steel jar measuring , empty plastic barrel , spade , cutting plier , hand grinder , three leg puller , araldite 36gm , anabond 666 , battery thimble brass light duty , battery thimble brass heavy duty , electrician kit , voltage regulator tester , battery cell tester , insulation tape , power drill , pipe wrench 24 inch , pipe wrench 36 inch , battery charger 12v , vehicle washing machine ) /bid number : gem/2026/b/7571054 * /dated: 23-05-2026 & & / bid document 1 / 43

State Government

CTN :45285975

28 May, 2026 1.21 Crore

Daman - Gujarat

Tender For providing and supplying modular furniture for newly constructed government school building at kachigam, nani daman. - civil works, providing supply and installation of corner sink table -size :-1100mm l x 1100mm d x 900mm hconstruction : floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an independent unit. cabinet should of square non-sharp edge construction. doors should be assembled with ss-304 hinge assembly. removable back panel should be provided to easily access the service lines running behind the cabinet benches. intermediate horizontal channels should be provided between door and drawer. toe-space of 90mm x 90mm is provided at front-bottom side of cabinet. levelers are provided for easy leveling of welded cabinet. shelf should be eight-bend panel with 20mm height. drawer tray should be of single piece construction. drawer should be well supported on lh and rh ball slide suspension system. steel door and drawer front should be of double wall construction with sound dampening material filled inside. doors should be easily removable and hinges should be easily replaceable. knee space panel should be in 22 gauge , cabinets are tested as per sefa 8m standard from a sefa approved lab and also tested as per en 14727 from a third party testing agency having nabl accreditation. dimensions : w= 900 mm, d = 900 mm, h = 875 mm configurations: 1 shutter - 1 nos moc: mscrca: is 513 (1994) thickness: lh/rh side panels, shutter front, bottom panel, top front, drawer separator, shelf, alignment channel is of 1.2mm thk. removable back panel, shutter cover, fr. rack strip, top cover panel is of 0.8mmthk. finish: powder coating pure epoxy, thickness 40-50 microns , followed with 9 tank pre treatment process the thickness of powder coat should be 45-50 microns, which passes the test of salt spray for 1000 hours. it should have a high temperature withstanding capacity with excellent electrical insulation properties.the rear portion of above accessories which is in contact with live metal should be made from thermo set material which will not melt on heating.handle : anodized aluminum recessed-type, ctc: 160.0mm lock: units have a locking facility with 180 and 10 lever cam lock mechanism (except for sink and corner unit) hinge: ss hinge screw: ss 304.shutter : should be of twin-type construction with sound dampening effect using profill.shutter cover should be equipped with bump on for sound dampening. base moulding should be made of pvc with corner clips. ball slide: 500mm length shutter should have provision of roller catch.pp sink,polypropylene molded sinks: made up of 5 mm thick high density and elastic poly propylene with good resistance to organic solvents. sink - bowl size to be a minimum of (l x w x d) 560 x 355 x 300 mm.faucet - 3-way type faucet as per approved makeworktop : jet black granite: it should be 19mm (+/- 2mm) thick jet black granite worktop. the exposed edges of the worktop should be chamfered and smoothened. the bottom of the worktop should be polished and there should be a v-groove throughout the length of the exposed edges to protect the cabinets from coming in contact with the spillages. the overhang on the storage cabinet is 25 mm at the front side and 30 mm at the sides. the backing material used is a neoprene mat of 6 mm thickness. (make as per selection of architect or selection of higher authority), providing supply and installation of corner table - size 1100mm l x 1100mm d x 900mm hconstruction: floor based welded cabinet system having storage body should be flush face construction with intersection of vertical and horizontal members like lh and rh side panel along with front horizontal channel, back panel and bottom panel. it should be relocated anywhere easily as it is an indepe

Central Government And Public Sector

CTN :45067010

08 Jun, 2026 NA

Bangalore - Karnataka

Tender For corrigendum : supply of hydro meter for heavy liquid 0-70 (with baume scale) ]

State Government

CTN :44919726

04 May, 2026 20.73 Lacs

Raichur - Karnataka

Tender For procurement of lab glasswares and lab apparatus to rtps - combined glass electrode, ph meter, conductivity cell (0.1), conductivity meter, turbididy meter, spectrophotometer cuvettes, orsat apparatus (vensil make), thermometer wet & dry bulb, self anemo syringe (flue gas), combination ph electrode, desiccator - 250 mm, heating mantle, hot plate, corrosion coupon (cu-ni), corrosion coupon (ss), corrosion coupon (ms), gas bladder, brush for conical flask, screw clips or pinch cocks, burette clamp & holder, filter paper, filter paper -no.41, filter paper -whatman no.42, tissue paper rolls, spatula 9 inch, separating funnel stand, ph indicator paper range 1-14, wash bottle-500 ml, beaker-50ml, beaker - graduated-25ml, beaker borosil graduated 100ml, borosilicate glas beaker 250ml, beaker-500ml, beaker(p)1000ml, beaker-1000ml, beaker-(p)-5 ltr, beaker plastic jug 2.5l, beaker(p)-100ml, beaker (p)-250ml, beaker-(p)-500ml, beaker-(p)-2000ml, beaker-(p)-10 ltr, bod bottle-300 ml, reagent bottle-250 ml, reagent bottle-500 ml, reagent bottles - 2000 ml, bottle reagent 1000 ml, glass rod flat end, bottle reagent ambcolour 500ml, bottle reagent ambcolor 1000ml, bottles-sampling wide-500 ml, bottles-sampling-1 ltr, indicator bottles with dropper, indicator bottle with droppers, bottle-weighing-25 ml, burette stand, burette-5ml, burette-10ml, burette /ptfe screw 25ml, burette-auto-50 ml, measuring cylinder-10 ml, cylinders-50 ml, cylinders-250 ml, cylinders-500 ml, cylinders-1000 ml, dishes-(c)-150 x 75 mm, volumetric flask -100 ml, deposit monitor, portable air quality monitor with data logger, flask-conical -100 ml, flask-conical -250 ml, flask-with stopper-250 ml, std volumetric flasks-25 ml, flask-volumetric-50 ml, flask-volumetric-250 ml, flask-volumetric- 500 ml, flask-volumetric- 1000 ml, funnel -50 mm, funnel -100 mm, separating funnel, pipettes-1 ml, pipette-s- 5 ml, pipette-s- 10 ml, pipette-s- 25 ml, rubber bellow for auto burette, cylinder-with stopper-250 ml, reagent bottle/plastic 1000ml, hydro meter sp.gr. 1 - 2.0, rubber blader for pipettes, round bottom flasks -250ml, round bottom flasks-500ml, reflux condensors-400mm, pipettes / bulb type - 50ml, corrosion coupon rack, bactaslides(yeast&fungi), bactaslides(pseudomonas), bactaslides(srb), bactaslides(e-coli), bio-foluling monitor, combined glass electrode, ph meter, conductivity cell (0.1), conductivity meter, turbididy meter, spectrophotometer cuvettes, orsat apparatus (vensil make), thermometer wet & dry bulb, self anemo syringe (flue gas), combination ph electrode, desiccator - 250 mm, heating mantle, hot plate, corrosion coupon (cu-ni), corrosion coupon (ss), corrosion coupon (ms), gas bladder, brush for conical flask, screw clips or pinch cocks, burette clamp & holder, filter paper, filter paper -no.41, filter paper -whatman no.42, tissue paper rolls, spatula 9 inch, separating funnel stand, ph indicator paper range 1-14, wash bottle-500 ml, beaker-50ml, beaker - graduated-25ml, beaker borosil graduated 100ml, borosilicate glas beaker 250ml, beaker-500ml, beaker(p)1000ml, beaker-1000ml, beaker-(p)-5 ltr, beaker plastic jug 2.5l, beaker(p)-100ml, beaker (p)-250ml, beaker-(p)-500ml, beaker-(p)-2000ml, beaker-(p)-10 ltr, bod bottle-300 ml, reagent bottle-250 ml, reagent bottle-500 ml, reagent bottles - 2000 ml, bottle reagent 1000 ml, glass rod flat end, bottle reagent ambcolour 500ml, bottle reagent ambcolor 1000ml, bottles-sampling wide-500 ml, bottles-sampling-1 ltr, indicator bottles with dropper, indicator bottle with droppers, bottle-weighing-25 ml, burette stand, burette-5ml, burette-10ml, burette /ptfe screw 25ml, burette-auto-50 ml, measuring cylinder-10 ml, cylinders-50 ml, cylinders-250 ml, cylinders-500 ml, cylinders-1000 ml, dishes-(c)-150 x 75 mm, volumetric flask -100 ml, deposit monitor, portable air quality monitor with data logger, flask-conical -100 ml, flask-conical -250 ml, flask-with stopper-250 ml, std volumetric flasks-25 ml, fl