Latest hydro plant scrap Tenders | Government hydro plant scrap Tenders

Central Government/Public Sector

CTN :45555774

22 Jun, 2026 NA

Mumbai - Maharashtra

Tender For supply, termination installation, testing and commissioning of ventilation system on roof of paint shop of lower parel workshop along with complete installation, frame work of suitable size with ms 50mmx 50 mmx 5mm, cabling, cable try work, wiring and protection system with 4 pole 20a mcb for each and mcb board along with 2.5 sqmm cable 4 core and 10 sqmm cable from panel to distribution board for main supply and power full exhaust system of length and height minimum 1 meter with width minimum 400 mm, diameter blades 900 mm, blades rotational speed -620 r/min or more. air flow 30,000 m?/h, noise level shall be less than 70 db, power shall be minimum 750 watt with the flap system and motor starter of 1 hp or as per suitable and confirming to s/iec 60947-4-1 or latest. all electrical works shall be carried out in accordance with the provision of indian electricity act 2003 and indian electricity rules 1956 amended to date and all the safety codes and procedures outlined in the safety codes shall be complied with general and safety requirement shall be governed by is 13947 (pt i) 1993 and is:8623/1993, amended to date. termination of all cables shall be done with bimetallic terminal connector suitable for 2.5 dia aluminium tubular busbar for 20a copper palm copper cu etp cw 0041a and aluminium barrel aluminium al 99.5 cable connector temperature resilience, corrosion resistance size: 2.5 sqmm confirming to is: 5561-1970 with maximum temperature rise of 90 degree celsius. material shall be confirmed to designation a6 of is: 617-1959. breaking resistance for barrel 85 n/m sq m and for palm 225 n/m sq m with stretching a5% for barrel must be for palm 2.5. type test certificate from nabl or any other govt agency lab report shall be attached along with the offer without which offer will be rejected. [ warranty period: 30 months after the date of delivery ] ]

corporations/Associations/Others

CTN :45504488

18 Jun, 2026 54.8 Thousand

Delhi - Delhi

Tender For dismantling and shifting of electrical equipments with associated material from rsu lajpat nagar-3 to t.e. bldg. okhla, mtnl, new delhi - dismantling, loading, unloading, transportation, shifting of old silent type dg set of capacity 63 kva, silent canopy, silencer, exhaust pipe, panels, power cables, battery chargers, batteries, diesel tanks and all other accessories i/c ducting, disconnection of supply cable i/c shifting from rsu lajpat nagar-3 to te bldg. okhla (and re-assembling the same i/c canopy at new site) as per the directions of engineer in charge etc complete as required., dismantling, loading, unloading, transportation and shifting from rsu lajpat nagar-3 to te bldg. okhla of following electrical equipments etc. complete as required.a) 94.5 kva avr with avr bypass panel, b) lt panel, c) capacitor panel, d) power room panel, e)7.5 tr ductable ac units complete with indoor/ outdoor units, f) ac panel, g)focus lights/emergency lights, h) mccb 100/200/250a with mccb box, i) fire detection and alarm system with fire panels, detectors, ri, mcp and hooters, fire cylinders ,buckets and all accessories, j) various sizes copper/ aluminium conductor electrical cables, k) cable runway trays, l) air circulator/exhaust fan/wall fan/ceiling fan/ac fresh air fan, m) 1x40 w/ 2 x 40 w tube light fittings/ halogen light / bulk head/ cfl fittings (approx 20 nos.), n) 100/200/250/400 amp. changeover switch with adopter box, o) ac copper pipes, p) tpdb/spdb 8 way/12 way with mcbs/isolators and adopter boxes, q)power protection box/alarm box/contactor box, dismentalling of burnt out/unserviceable material and shifting from rsu lajpat nagar-3 to te bldg.okhla i.e. ac drain pipes, ac condenser frames , water motor, air curtain,gi earth strip, single core copper wiring, conduit pipes, ms boxes, power point boxes, computer point boxes, switches, sockets, old tube lights, slotted angle pieces,fitting louvers, gi duct pieces, duct insulation,angle iron supports i/c removing from wall/surface etc. as per the directions of engineer-in-charge.

Central Government/Public Sector

CTN :45555987

08 Jul, 2026 NA

Palakkad - Kerala

Tender For high pressure jet cleaning machine working pressure: 200-250 bar water flow rate: 900-1100 liters/hour steam temperature (if applicable): 140-155 degree celsius hot water output temperature: 85-90 degree celsius suction height (from water source): minimum 0.5 m pump specifications critical for durability and pressure stability. pump type: triplex plunger pump pump speed: around 1450 rpm number of pistons: 3 piston material: ceramic minimum feed pressure: 6-8 bar motor & electrical specificationsdefines power and efficiency. power supply: electrical phase: single phase / three phase motor rating: around 7-7.5 kw protection class: ipx5 or higher automatic pressure cut-off: yes heating system (for hot water models) optional but essential for grease removal. burner type: diesel / electric burner power: 60-90 kwfuel tank capacity: around 20 liters detergent tank capacity: around 20 liters hose, gun & lance user interaction components. high-pressure hose length: 8-10 meters electrical cable length: 5 meters spray lance length: approx. 700 mm spray gun: standard high-pressure trigger gun quick-connect couplings: preferred construction & materials ensures robustness and long service life. chassis material: mild steel (industrial grade) body material: mild steel or corrosion-resistant metal wheels: solid rubber wheels frame design: compact, vibration-resistant safety & protection features mandatory for industrial equipment. thermal motor protection pressure relief valve overload protection weather-proof switches low-water cut-off (recommended) dimensions & weight affects portability and storage. weight (without accessories): 140?150 kg mobility: trolley-mounted with heavy-duty wheels accessories (standard supply) high-pressure hose spray gunspray lance nozzle set detergent suction hose operating conditions operating temperature range: 0 degree celsius to 40 degree celsius environment: dusty, humid, industrial conditions [ warranty period: 30 months after the date of delivery ] ]

CTN :45527755

03 Jul, 2026 4.45 Crore

Visakhapatnam - Andhra Pradesh

Tender For tender for supply of linear position indicator , oil seal kit mechanical seal for xrvn-127r4-165-26 , motor protection relay for sw pump starter , smps 24vdc 6.2 amp telemecanique abl1rem24062 , core for filter drier , shock mounts for 2 x 4 tr refrigeration plant for nopv class , capacity contorl piston spring , soft starter , annual inspection kit , thermostatic expansion valve size-1-4inch x 1-2inch flare , liquid line solenoid valve cool rooms , under voltage relay 3 ph minilec vct-d2 , mcb 3 pole 2 amp 440 vac hager nc302n , overhaul kit , rubber bellows for cw pump suction , no element siemens 3tx4 010-2a , push buttons set 1 each typ for lcp of 2x2.1 tr ref plant , mechanical seal , timer eapl-ge etm 0010046 2nc , fan with motor for ac unit for dairy room for 2x2.1 tr ref p , mc mccb ge 100a s-140a with aux contact 2no-2nc , selector switch kaycee 02 pole on/off with 1 no contact , fan with motor for ac unit for meat room for 2x2.1 tr ref pl , set of bearings for 1.5 kw motor for 2 x 2.1 tr ref plants , fan with motor for ac unit deep freez for 2x2.1 tr ref plant , fan with motor for ac unit for veg room for 2x2.1 tr ref pla , solenoid valve danfoss evrs3-24 vdc coil , indication lamps set 1 each ty for lcp of 2x2.1tr ref plant , valve globe type 5-1-8inch ods , motor 15kw2 p ip56 sq cage induction 380v 50hz ci f b5 , vibration eliminator 3-4inch ods , valve ball type 2-5-8inch ods , cartidge for indufil duplex oil filter idgl-2-226 for 144 tr , rubber expansion joint 125 nb with flanges , set gaskets for evaporator for 144 tr ac plant , shaft seal placement kit part no.kxs204 , comp howden open screw xrvn201-1.45-2.6 with lpi r134 2950r , unloading piston , rhb/lht spacer , vibration eliminator for suction line , air cooling unit for dairy room , safety valve , thermostatic expansion valve gfe-1zp charge 1-4inch x 1-2inch flar , valve plate assembly part no-08436 , valve angle type 1-2inch ntp m x 1-2inch flare , kit for power contactor for compressor stater , hrc fuse link ge ns4 4a with nh type fuse base , control transformer tape wound 415 v/110 v 150 va , set gaskets part no 08072 , oil separator danfoss oub 4 for 2 x 2.1 tr refrigeration pla , thermostatic exp. valve gfe-1.1-2jc charge 1-4inch x 1-2inch flare , filter drier sporlan c485g 5-8inch ods , set of v belts , safety valve 1-2inch npt m set pressure 12.5 kg-cm2 r134a , pres transmitter danfoss mbs 3100-2211-1ac04 range 0-16 bar , aux contactor ge rl4 rd022td 2 no - 2nc coil -24v dc , coil for power contactor for sw pump stater , kit for power contactor for sw pump stater , power contactor ge 0 32a 415 v ac 3 pole , rear bearing part no 08157 for model- fx5bi , vibration eliminator 1-1-8inch ods , valve hand shut off type 1-4inch flare , set of bearing for fx-f5 bi compressor , set piston dia 70 part no 08035 , thermostatic exp valve gfe-1-2jc charge 1-4inch x 1-2inch flare , setcrankshaft part no 08056 , temp transmitter mbt 5560-0000-0200-10-415 range - 50-150 c , set shut-off valve nw32 part no-08082 , valve angle type 1-4inch ntp m x 1-4inch flare , valve check type 5-8inch ods , set of gaskets for condenser for 2 x 2.1 tr ref plant , set capacity regulator 24 v dc , set connecting rod part no 08307 , front bearing part no 08164 for model- fx5bi , filer drier core , impeller part no 120 for celv 65-250 , soft starter ge astat type-qc1ndp 160 kw , mc mccb ge 100a s 400a with aux contact 2no-2nc , mc mccb ge 100a s 400a with aux contact 2no-2nc , semi conductor fuses ge - feraaz 200a 6.611 rd30-xx0315 , flow meter for seawater system

CTN :45448797

18 Jun, 2026 NA

Darjeeling - West Bengal

Tender For corrigendum : supply of master cyl power unit , system protection valve , eng mtg pad , solenoid switch , field coil assy

CTN :45566316

25 Jun, 2026 NA

Darjeeling - West Bengal

Tender For supply of camera for cctv system (v3) , video recorder for cctv system (v2) , led display for monitoring , 4u wall mount rack , poe switch 16 port , pow switch 24 port , 9u wall mount rack , rj45 connector , power backup , utp cat 6 cable , cable ofc , surge protection against lighting damage upto 4000mah , 20 ft sqaure bar pole , kbn switch , mouse , foundation materials, cement, sand, pebbles, etc , installation along with necessary accessories for 44 cameras , junction box , poe switch 8 port , surveillance hard disk drive (hdd)

CTN :45557243

25 Jun, 2026 NA

Hisar - Haryana

Tender For supply of volts ac 3 phase 4 wire system with builtin amf panel sound proof canopy and foundation etc as per oem recommendations , sitc of 11 kv 630 amps outdoor type 5 way rmu ring main unit comprising of 02 nos load break switches and 03 nos 630 amp vcbs complete as per oem recommendations , sitc of 400 kva cap 11 kv and 433 v ac 3 phase 50 hz outdoor type step down transformer double copper wound oil immersed onan vector group dyn 11 and conforming to eel - 3 as per is - 1180 part - i , m and l for construction of platform for transformer galvanised chain link fencing 1 mtr wide pcc along the fencing 1 mtr wide steel gate gravels danger notice plate all as per description , m and l for earthing with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick including galvanized iron earth strip 25 x 4 mm complete , sitc of lt panel out door type cpri approved out door type with 01 no incoming 630 amp acb and 2 no 630 amp outgoing mccbs complete all as per description , supply laying and testing of 11 kv ht xlpe insulated screened pvc bedded armoured electric power cable with aluminium conductor of sizes 3 core 95 sqmm complete all as per description , s and f heat shrink type outdoor termination cable jointing kit for 11 kv 3 core xlpe armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as per description , s and f heat shrink type indoor termination cable jointing kit for 11 kv 3 core xlpe armoured aluminium conductor cable of size 50 sqmm to 95 sqmm complete all as per description , supply laying and testing 1100 volts grade xlpe insulated and pvc sheathed armoured multistrand aluminium conductors cable of size single core 630 sqmm complete all as per description , boring of hole under road or pavement or hard standing suitable for passing of gi or dwc pipe upto 150 mm bore and making good complete all as per description , s and f gi pipe 100mm bore steel tube light grade with all fittings complete all as per description , excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for laying of cable etc and getting out in soft or loose soil complete all as per description , m and l for sand cushioning 230 mm thickness with dry sand and punned down to 180 mm in trenches for protection of cable complete all as per description , m and l for brick covering to underground electric cable using sub class b bricks complete all as per description , supplying and laying un - reinfoced precast concrete cable cover of class hv type 1 with flat size 300 x 180 x 40 mm complete all as per description , m and l for returning filling in approved excavated soil including spreading levelling and well ramming in layers n.exc 25 cm thick complete all as specified and directed , m and l for removing surplus soil to a distance not exceeding 50 m and depositing at a level not exceeding 1.5 m above the starting point complete all as specified and directed , supply and fixing in vertical position pre stressed concrete pole conforming to is -1678 of 11 mtr long 152 mm x 152 mm at top and 152 mm x 260 mm at bottom class 9 complete all as per description , m and l for cross arms bracings supports clamps eye hook and back plates fabricated from structural steel sections complete all as per description , sitc gang operated air break switch mounted on insulators ht 11kv 200 amps rating triple pole fifteen insulator suitable for vertical mounting complete all as per description , m and l for lightning arresters expulsion type complete with all fittings transmission class discharge capacity 65 kilo amps 11000 volts complete all as specified and directed , m and l for pcc 1 ratio 4 ratio 8 type d - 2 //bid details 2 / 28 using 40 mm graded stone aggregate in mass concrete and filling complete for foundation complete all as specified and directed

CTN :45447544

18 Jun, 2026 NA

Shahjahanpur - Uttar Pradesh

Tender For corrigendum : various works related to the protection system of 33/11 kv power sustation under business plan -2026-2027 item under electrical test division shahjahanpur district shahjahanpur - विद्युत् परिक्षण खंड शाहजहांपुर के अंतर्गत बिज़नस प्लान २०२६-२०२७ में ३३/११ केवी विद्युत् उपकेन्द्र की प्रोटेक्शन प्रणाली से सम्बंधित विभिन्न कार्य

CTN :45396881

19 Jun, 2026 NA

Multi City - Multi State

Tender For corrigendum : supply, installation, testing, commissioning of ground mounted on grid, 5 mwp solar power plant with the objective of generating and supplying solar energy to murdeshwar tss at 25 kv, single phase, 50hz along with required protection system through public private partnership (ppp) on dbfot (design, build, finance, operate and transfer) basis for 25 years at murdeshwar of konkan railway in the state of karnataka

CTN :45556941

19 Jun, 2026 NA

Multi City - Multi State

Tender For supply, installation, testing, commissioning of ground mounted on grid, 5 mwp solar power plant with the objective of generating and supplying solar energy to murdeshwar tss at 25 kv, single phase, 50hz along with required protection system through public private partnership (ppp) on dbfot (design, build, finance, operate and transfer) basis for 25 years at murdeshwar of konkan railway in the state of karnataka

Hydro Plant Scrap Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

corporations/Associations/Others

Central Government/Public Sector